GF4 Ti4600 Error 10 after installing WDM capture drivers

Hello everybody,
Maybe one of you knows a solution for this problem.
I'm using a MSI-8872 (Ti4600) on an MSI-6367 Nforce motherboard. WinXP pro is the OS. I'm trying to use the video-in on this videocard. After installing the WDM capturedriver i get an error 10 on this device "device can't start".To be really sure that this isn't an resource conflict i removed all extra hardware (soundcard,firewire,modem) and disabled all integrated peripheralls on the MOBO (serial, parallel ports, LAN audio, modem). After this i did a clean install of WXP detonator 30.84 and WDM 1.16. Still same problem !!!!!!!!!!! Tried also with some other combinations of detonator and WDM but the problem remains.
Does anybody know:
1) If this is a more common problem with this videocard (maybe in combination with Nforce chipset)
2)A solution
Greetingzzz,
Foetsjie

Hello, i have the same problem on WinXP Pro.
So I tried to use newest vga driver and capture WDM driver 1.08 but the problem is same still.
Do you know where i can download last BIOS for my VGA card?
Thank to all )
Best regards
Jiri

Similar Messages

Hibernate or Stand by fails in WinXP after installing WDM capture driver

Hi, I have an MSI MX440 card with video in and out. The card works like I expected, games or capturing video works fine.
I first installed the card on my Windows 2000 machine, about a year ago. After installing the WDM capture driver it stopped going in Stand by or hibernation mode.
In the beginning of this year I bought a P4 configuration but I did not install the WDM driver. Some time ago, I gave it another try on this system but since then I can no longer go into hiberation mode or stand by. The computer says 'Preparing to go standby' and it does not work, it returns to the desktop with another message box 'System not in stand by', 'The WDM Video Capture driver universal device is qt the cause that the computer no longer goes into stand-by, if the problem keeps existing you will need qn updated devicedriver'.
I have currently the Nvidia driver 2.1.20 running, the driver is not digataly signed.

Hi, I have an MSI MX440 card with video in and out. The card works like I expected, games or capturing video works fine.
I first installed the card on my Windows 2000 machine, about a year ago. After installing the WDM capture driver it stopped going in Stand by or hibernation mode.
In the beginning of this year I bought a P4 configuration but I did not install the WDM driver. Some time ago, I gave it another try on this system but since then I can no longer go into hiberation mode or stand by. The computer says 'Preparing to go standby' and it does not work, it returns to the desktop with another message box 'System not in stand by', 'The WDM Video Capture driver universal device is qt the cause that the computer no longer goes into stand-by, if the problem keeps existing you will need qn updated devicedriver'.
I have currently the Nvidia driver 2.1.20 running, the driver is not digataly signed.

Windows 8 crashes and with the error "kernel_security_check_failure" after installing Boot Camp drivers.

Hi!
I've got a new 27" iMac (late 2013), and I was going to install Windows 8.1 (64-bit) to be able to play a few games.
Everything went smoothly (installed normally via Boot Camp Assistant), and after the Windows setup, the Boot Camp drivers needed to be installed. After this, the computer rebooted, but crashed at a blue screen with the error called "kernel_security_check_failure".
It rebooted a few times on its own, but after a few times, I got some options, and I chose to "refresh" the Windows 8 install, meaning it would reset the install while keeping my files (even though I didn't have any, as I never got to use it). This took some time, but it worked, and it booted into W8.
The Boot Camp drivers had been removed though, so I had to reinstall them. After they had reinstalled, the computer rebooted and the same blue screen with the same error hit me.
Something tells me that some of the BC drivers are messing things up. I can't find any information on this elsewhere.
Would it be possible to install only selected drivers, to eventually find out which driver is causing the problem?
All help is greatly appreciated!

I finally gave up, reloaded everything, this time, using WIn 8.1 Pro, not Enterprise. After I did the updates, patches, Norton 360, shut computer down and connected the external drives, and booted up...and got the BSOD. This time, I went to Microsoft and downloaded the Windows Debugger, and think I may have found the problem...NORTON!
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Am conrtacting them, but, here's the Debugger output:
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Dump\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
Machine Name:
Kernel base = 0xfffff802`0f87e000 PsLoadedModuleList = 0xfffff802`0fb482d0
Debug session time: Tue Jun 17 00:48:52.131 2014 (UTC - 6:00)
System Uptime: 0 days 0:03:09.864
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd0002852d3e0, ffffd0002852d338, 0}
*** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Followup: MachineOwner
6: kd> !analyze -v
*                        Bugcheck Analysis                                    *
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd0002852d3e0, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd0002852d338, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
Debugging Details:
TRAP_FRAME: ffffd0002852d3e0 -- (.trap 0xffffd0002852d3e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe00059c129f0 rbx=0000000000000000 rcx=0000000000000003
rdx=ffffe0005718d2a0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8020f9e8cdb rsp=ffffd0002852d570 rbp=0000000000000000
r8=0000000000005aa0 r9=00000000000007ff r10=ffffd00066cc8000
r11=ffffe00059963040 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe cy
nt! ?? ::FNODOBFM::`string'+0x682b:
fffff802`0f9e8cdb cd29            int     29h
Resetting default scope
EXCEPTION_RECORD: ffffd0002852d338 -- (.exr 0xffffd0002852d338)
ExceptionAddress: fffff8020f9e8cdb (nt! ?? ::FNODOBFM::`string'+0x000000000000682b)
   ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
ExceptionFlags: 00000001
NumberParameters: 1
   Parameter[0]: 0000000000000003
DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT
BUGCHECK_STR: 0x139
PROCESS_NAME: System
CURRENT_IRQL: 2
ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_PARAMETER1: 0000000000000003
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff8020f9ddae9 to fffff8020f9d1fa0
STACK_TEXT:
ffffd000`2852d0b8 fffff802`0f9ddae9 : 00000000`00000139 00000000`00000003 ffffd000`2852d3e0 ffffd000`2852d338 : nt!KeBugCheckEx
ffffd000`2852d0c0 fffff802`0f9dde10 : ffffe000`59c8cc40 00000000`00000000 ffffe000`54b71040 fffff800`1d6d40b6 : nt!KiBugCheckDispatch+0x69
ffffd000`2852d200 fffff802`0f9dd034 : 00000000`00000000 00000000`00000000 ffff6d2d`50094127 fffff802`0f81458f : nt!KiFastFailDispatch+0xd0
ffffd000`2852d3e0 fffff802`0f9e8cdb : ffffc000`061df4e0 ffffc000`061df4e0 ffffc000`061dfbf8 00000000`00000000 : nt!KiRaiseSecurityCheckFailure+0xf4
ffffd000`2852d570 fffff800`1d7a0be6 : ffffe000`59e10120 fffff800`1d794388 ffffe000`54dfe9c8 fffff800`1d735f7c : nt! ?? ::FNODOBFM::`string'+0x682b
ffffd000`2852d5a0 fffff800`1d7a54e2 : ffffc000`061df4e0 ffffc000`061dfbf8 ffffc000`061df550 fffff800`1d7367ea : SYMDS64+0x71be6
ffffd000`2852d5d0 fffff800`1d737f20 : ffffc000`061df378 ffffc000`061dfbf8 00000000`00000000 ffffc000`05a9bf18 : SYMDS64+0x764e2
ffffd000`2852d620 fffff800`1d73e171 : ffffc000`051e6a88 ffffc000`05a9bf18 ffffc000`05a9bf18 ffffe000`5988cb00 : SYMDS64+0x8f20
ffffd000`2852d650 fffff800`1d782027 : ffffc000`061ea018 00000000`00000000 ffffe000`58409008 fffff800`1d794388 : SYMDS64+0xf171
ffffd000`2852d680 fffff800`1d79af21 : ffffc000`061ea018 ffffd000`2852d8c9 ffffe000`58409008 00000000`10000004 : SYMDS64+0x53027
ffffd000`2852d6c0 fffff800`1d9a3bb3 : ffffe000`58409078 fffff800`1d98b3e8 ffffe000`58409008 ffffd000`2852d8c9 : SYMDS64+0x6bf21
ffffd000`2852d6f0 fffff800`1d9a91fa : ffffe000`5840a1a8 ffffe000`58409008 00000000`00000000 ffffe000`00000000 : SYMEFA64+0xe9bb3
ffffd000`2852d720 fffff800`1d9ae015 : 00000000`00000000 00000000`00000000 ffffd000`2852d8c9 ffffe000`58a10e60 : SYMEFA64+0xef1fa
ffffd000`2852d760 fffff800`1d9adf4c : 00000000`01820201 ffffe000`58a10e60 ffffe000`58a10e60 ffffe000`58a10be0 : SYMEFA64+0xf4015
ffffd000`2852d790 fffff800`1d9b294c : ffffe000`59e0a150 ffffe000`58a10e60 ffffe000`5988ca80 ffffe000`58a10e60 : SYMEFA64+0xf3f4c
ffffd000`2852d7c0 fffff800`1d9a2435 : ffffd000`2852d8a0 ffffe000`599a4010 ffffd000`00000000 ffffe000`59e0a010 : SYMEFA64+0xf894c
ffffd000`2852d7f0 fffff800`1d6d528a : 00000000`00000000 ffffe000`59e0a070 ffffe000`5604e300 ffffe000`58a10e60 : SYMEFA64+0xe8435
ffffd000`2852d820 fffff800`1d71bf76 : ffffd000`2852d960 00000000`00000000 ffffe000`5604f900 ffffe000`571dab10 : fltmgr!FltpPerformPreCallbacks+0x31a
ffffd000`2852d930 fffff800`1d6d413a : ffffe000`57170dd0 ffffe000`571dabd0 ffffe000`59cf18c0 fffff802`0fd411a7 : fltmgr!FltpProcessShutdownRequest+0x122
ffffd000`2852d9b0 fffff802`0fbf7518 : ffffe000`57170dd0 00000000`00000001 ffffe000`571dabd0 fffff802`0fb54a90 : fltmgr!FltpDispatch+0x13a
ffffd000`2852da10 fffff802`0fbf7273 : 00000000`00000001 00000000`00000000 00000000`00000001 00000000`00000000 : nt!IopShutdownBaseFileSystems+0xb8
ffffd000`2852da90 fffff802`0fbfb722 : fffff802`0fbfb4b0 00000000`00000000 ffffe000`59963040 ffffe000`59963040 : nt!IoShutdownSystem+0x127
ffffd000`2852db10 fffff802`0f8d1adb : fffff802`0fbfb4b0 ffffd000`2852dbd0 00000000`00000000 ffffe000`59963040 : nt!PopGracefulShutdown+0x272
ffffd000`2852db50 fffff802`0f94d794 : ffffe000`59965800 ffffe000`59963040 ffffe000`59963040 ffffe000`54b71040 : nt!ExpWorkerThread+0x293
ffffd000`2852dc00 fffff802`0f9d85c6 : ffffd000`66c40180 ffffe000`59963040 ffffe000`59965800 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`2852dc60 00000000`00000000 : ffffd000`2852e000 ffffd000`28528000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
SYMDS64+71be6
fffff800`1d7a0be6 33d2            xor     edx,edx
SYMBOL_STACK_INDEX: 5
SYMBOL_NAME: SYMDS64+71be6
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: SYMDS64
IMAGE_NAME: SYMDS64.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 51f84c44
FAILURE_BUCKET_ID: 0x139_3_SYMDS64+71be6
BUCKET_ID: 0x139_3_SYMDS64+71be6
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x139_3_symds64+71be6
FAILURE_ID_HASH: {bf9be68b-5f04-08d4-3152-3d420dc362f6}
Followup: MachineOwner

TS1717 I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden

No sound after installing the latest drivers

After installing the latest drivers for X-fi xtrememusic, 2.8.003 I have no sound. Also my creative console is stuck in Entertainment Mode, it won't switch to any other mode. Help please?

Pheary wrote:
?My best guess is this is some bizarre driver/registry problem, since it mostly works perfect in XP, but barely at all in Vista.
Well, i don't have a solution for you, but if your soundcard + hub act like that even under xp after a few weeks i would suggest to get a replacement, cause there might be a hardware-error that causes your problem. A software/driver problem sounds very unlikely to me. That your having problems under Vista, isn't strange at all, cause there are still no final drivers relaesed for Vista and the support of the hub is rather barebone at the moment. Stormblade

Error message after installing Office 2013 from DVD

After i install office 2013 on new Win 8.1 Pro laptop , i can start in control panel mail 32 bit option to configure accounts...
i found error in event logs:
Log Name: Application
Source: Application Error
Date: 2014-06-24 5:20:58 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: PMCHome
Description:
Faulting application name: rundll32.exe, version: 6.3.9600.16384, time stamp: 0x52158827
Faulting module name: KERNELBASE.dll, version: 6.3.9600.16656, time stamp: 0x531812f4
Exception code: 0xc06d007e
Fault offset: 0x00012c1a
Faulting process id: 0x1180
Faulting application start time: 0x01cf8ff2304d4f6f
Faulting application path: C:\Windows\SysWOW64\rundll32.exe
Faulting module path: C:\Windows\SYSTEM32\KERNELBASE.dll
Report Id: 6ebd5d06-fbe5-11e3-8263-7c7a9101e4d2
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-24T21:20:58.000000000Z" />
<EventRecordID>1851</EventRecordID>
<Channel>Application</Channel>
<Computer>PMCHome</Computer>
<Security />
</System>
<EventData>
<Data>rundll32.exe</Data>
<Data>6.3.9600.16384</Data>
<Data>52158827</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.3.9600.16656</Data>
<Data>531812f4</Data>
<Data>c06d007e</Data>
<Data>00012c1a</Data>
<Data>1180</Data>
<Data>01cf8ff2304d4f6f</Data>
<Data>C:\Windows\SysWOW64\rundll32.exe</Data>
<Data>C:\Windows\SYSTEM32\KERNELBASE.dll</Data>
<Data>6ebd5d06-fbe5-11e3-8263-7c7a9101e4d2</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
Can some answer why?
Fresh install, no errors in install at all
Regards

Hi,
Rundll32.exe is responsible for calling Windows DLL (or Dynamic Link Library) files and loading them into your PC's memory.
Usually the rundll32.exe Application error is not a straight forward error. There are lots of possible reasons for this error, includes a failed or incorrect installation or uninstallation of any softwares, which might have left erroneous Windows registry
entries.
Tracking down the exact issue can take lots of investigation. The severity of this error really depends, if everything works well for you, you can just ignore it. However, if you want to correct this, try below steps:
Since you notice this error right after you installed Office 2013, try to remove and re-install it using default setting.
Reboot your computer, many programs require a reboot for successful installation.
Try to update your computer drivers. This is usually the cause of lots of .dll file error.
Try to run the System File Checker tool (SFC.exe) to correct any incorrect system file. It is a utility in Windows that allows users to scan for corruptions in Windows system files and restore corrupted files:
http://support.microsoft.com/kb/929833/en-us
Hope this helps.
Thanks,
Ethan Hua CHN
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Error message after installing 10.8.2 update

After installing the osx 10.8.2 update the mok resrtarts and give a error message: "the update could no be installed" or so. As I look up in the system info the update appears al isnatlled. Why?

I'm another user with same issue, started right after the upgrade, appears consistently with login/out, sleep/wake, rarely otherwise.
? some launchd process calling usereventagent which then crashes
Application Specific Information:
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFNumber length]: unrecognized selector sent to instance 0x5088002c7'
abort() called
terminate called throwing an exception
This is on a 2.66 GHz Quad-Core Xeon. No similar issue with my Air which I also upgraded to 10.8.2, so I suspect it's a launchd process installed by something which I and others have added that gets run at login and logout (and less frequently at other times).

Adobe reader has stopped working error message after installing reader XI on windows 7

Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
Does anybody know why ?

Dear Pat,
Thank you for your reply.
It is Ver. 11.0.06 for Acrobat XI
No, I can't open the Reader at all. The error message box popped up immediately when I run the Reader

Error Messages after Instaling 10.6.2

After installing !0.6.2 I get the following error messages--System extension cannot be used. The system extension"/System/Library/Extensions/hpPluginInit.kext" was installed improperly and cannot be used.Please try reinstalling it or contact the products's vendor for an update --- Second Message---System extension cannot be used.The system extension"System/Library/Extensions/CDSDAudioCaptureSupport.Kext" was installed improperly and cannot be used. Please try reinstallingit or contact the products vendor for a update,
Every thing appears to be operating OK.Should I delete the extesions or what repair should I implement to correct the problem
Thanks A Lot For Your Help

Trying to update with the latest drivers didn't do me any good.
HP has the worst software and horrible update instructions.
This is the page that purports to having the latest for snowleopard
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadInst?swfsequence=1&lc=en&dlc= en&cc=us&lang=en&softwareitem=oj-74786-1&os=219&product=3737195
I found I had to specifically delete the offending file "hpPlugInInit.kext" before I no longer received that error message.
HP also has this firmware update:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-71331-1 &lc=en&dlc=en&cc=us&lang=en&os=219&product=3737195
There are no instructions telling me if this has or has not been included in my printer.
I'm guessing at the instructions, and I'm going to run the program. But who know at the success.
I'm never buying another HP anything. Especially if Apple offers me a "deal" on it.

Get windows error 999 after installing itunes and program won't open.

I get a windows error 999 message when I try opening Itunes after a new install, what is my problem?

had to install OS X Mavericks again. after install, everything runs smoothly again. ran recovery from restart then installed mavericks over old mavericks.

Error Messages After Installing Leopard 2

After installing Leopard from the Install DVD, I used Software Update to update to 10.5.1, and updated QuickTime, etc. I also ran Cocktail, the Leopard edition. The Hard Drive checked out OK. When I ran Repair Permissions in Disk Utility, I got a number of error messages. One set starts like this: "Warning SUID file "System/Library/Private Frameworks/DiskManagement.framework/Versions/A/Resources/DiskManagementTool" has been modified and will not be repaired."
There are a number of messages like this. What shall I do?

Download and install this update, even though you've already updated.
(26492)

ITunes Error 7 (Windows error 127) after installing iTunes 64-bit for Windows

After installing iTunes 64-bit for Windows (latest build), I get an error pop-up saying:
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I've gone thru the uninstall, reboot and reinstall process three or four times now. Still nothing.
Furthermore, after clicking okay to the error, it continues to pop up on it's own every 45 seconds or so.
There was one other error I came across after trying to launch iTunes after installation.
See both error messages here:
http://screencast.com/t/DSg4PpKF5BeX

Brilliant. Thanks a lot. I've wasted a couple of hours on this nasty bug, & trying all the other suggestions across various threads again and again.
I now find I had the same registry entry hanging on, despite uninstalling & wiping everything again and again. Having now deleted this key, (I don't even have an iPod), & iTunes 11.1.14 now opens at long last.
But WHY is this bug not fixed? Enough people are suffering with this across the forum. WHERE is Apple support on this?
It should have been added to their page at
http://support.apple.com/kb/HT1923
by now, why hasn't it???
It's not good enough!
Re:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDlls]
"C:\\Program Files\\iPod\\bin\\iPodService.exe"=dword:80000000
AHA! This entry for iPodService.exe still exhisted. So I had no folders on the PC, no installs on the PC and no services running.... BUT this was still in the Registry.
Step 5 - Delete only the Registry entry above. NO REBOOT
Step 6 - Reinstall iTunes64.exe

After installing itunes 10 installation was successful but then tells me error 2 (windows error 2), After installing itunes 10 installation was successful but then tells me error 2 (windows error 2)

After installing itunes 10 installation was successful but then tells me error 2 (windows error 2).

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

TS3258 error 42404 after installing iTunes 10.6

I'm getting the above error after installation. Now itunes won't recognize my ipod. What do I do?

After installing itunes 10.6, system does not connect to itunes, it kepps on saying "Accessing itunes store".
I'd start with the following document with that one:
Apple software on Windows: May see performance issues and blank iTunes Store

Error 35 after installing IOS 5 to my Iphone

After installing my IOS 5 on mylaptop and then synchronizing on my Iphone i constantly get the message error 35 occured now i have lost al my music.
It is stil in my computer but out of my Iphone. Every time I try to restore it I got these message.
Should I remove my substituecopy ?

Go to Camera, Press the three circles in the bottom right corner, and press the middle filter 'None'.

GF4 Ti4600 Error 10 after installing WDM capture drivers

Similar Messages

Maybe you are looking for