GForce4 MX420-T - Unable to see video on external TV/Monitor/VCR
I am unable to get any watchabe video out via the RCA or S-Video cable from my video card. I do get some garbled rubbish on the screen but it's just the odd bunch of diagonal white lines on a black screen.
I have tried this cable on other devices (Other than the Y adaptor that came with the card) and in the inputs of the divices that i want to watch the PC on and it works.
I have attempted to find a setting in the video card setup/config that allows me to specify the output to S-Video/RCA or PAL/NTSC but I am unable to find any setting like this.
Thanks in advance
Quote from: Rassilon on 12-August-05, 18:20:53
I LOVE your Firefox, do you mind if I grab a copy of it?
Go for it, I borrowed it from someone else in the forum. Then I found a bigger picture online. So far I have not found the original person who created it.
With the NVidia drivers, it should work. All you need to do is go into the graphic properties and have it output video to the correct device/cable. You should be able to have it clone the desktop or a second desktop. If it still doesn't work you will probably need to RMA the card.
What is the Y-adapter you mentioned in your first post?
Good Luck
Jeremy
After a bit of googling I extracted this from NVidias site.
1) Right-click on the Desktop and select Properties
2) Left-click on the tab labeled Settings. Then left-click on the Advanced button.
3) This will bring up the Advanced Properties. Left-click on the tab corresponding to the graphcs card that is installed in your PC. For example, if you have a GeforceFX 5800 Ultra graphics card, you will click on the tab labeled "GeforceFX 5800 Ultra". A window will pop up to the left of this panel. From this left side window, select nView Display Mode.
4) You should then see a panel similar to the one above. If you are using a single display video card, left-click the "Current Display" drop down menu and choose "TV". Then click on the "Apply button to confirm the change.
5) If you are using a dual display video card, left-click over the "nView Modes" drop down menu and then select "Clone Mode". Then left-click over the "Display Pair" drop down menu and choose your monitor configuration (i.e. if you are using an analog CRT monitor plus TV, select "Analog Display + TV"). Then select the "Apply button.
6) You should now see the display on your TV. A confirmation window will pop up prompting you to confirm the changes made. Select Yes to keep these settings. Otherwise, the display will revert back to your previous settings.
Hope This Helps
Similar Messages
-
I am unable to see videos on amazon prime because it says I need to upgrade th Flash player ...which
I am unable to see videos on amazon prime because it says I need to upgrade the Flash player ...which I have done many times, still is not working. I have MAC os x 10.5.8*
Can you help me?What version of Flash Player do you have installed?
http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html -
Flash 11.7.700.202 - reports of unable to see video
We run a social video site and have had many reports of users unable to see video in the last few days. Our code has not changed and we believe this is due to the 11.7.700.202 release as these problems were not previously reported.
Symptoms:
User is subscribing via rtmfp to a live stream on an Adobe FMS. When this happens, we don't know if they fail to connect or the connect succeeds and they don't see video. We use an inhouse flash app. The feed is available on the FMS since other users are successfully subscribing to the same feed.
This happens to a small percent of users but that leads to many reports across our user base.
Refreshing the page, which reinstantiates the flash app, removes the problem.
Is anyone else seeing problems with viewing video from the newly updated flash player?
Thank you,
RobertWe found the problem and it is on our side, not a problem with the flash upgrade. I'll write what happened here in case it can help anyone else.
On Sunday night, two days after this post, one of our FMSs stopped accepting RTMFP publishes. When we examined the box we found that it was reporting that it had reached its max licensed RTMFP connections. We know there weren't that number of connections on there and suspect that connections leaked. After restarting the box, the FMS resumed accepting RTMFP publishes. This failure has never happened to us before so we're treating it as a one-off and not investigating.
Since the restart of that FMS, reports of subscribe failures have disappeared. That's great and we're presuming the restart fixed the subscribe failures. The strange thing is that users were reporting subscribe failures several days before we observed any publish failures. That said, we know this FMS was in a strange state so we concluded our investigation.
Thanks to Chris for the quick response on this.
Robert -
If I accept cookies, I am unable to see videos in YouTube
Yesterday I upgraded Firefox from version 3.6.13 to version 3.6.14 on two different machines (both of which use Windows XP). And then a very strange thing happened: after that I am unable to see YouTube videos. I can see hear the sound but there is no image (there is a white space instead). Furthermore, this only happens when I am a regular user, not an administrator. And it happens only with YouTube. The only way I found to fix the problem was to delete all YouTube cookies and to block any new ones. Then all works fine.
If you've an answer that works, that's fine. Problem may occur for various reasons, including flash problems and video drivers requiring updating.
As a temporary workaround hovering your cursor over the place where the pop-out button should be below the YouTube video screen, then left click there and the video will then display in the pop-out screen. -
Unable to See Videos files In Blackberry 8830
Hello Everyone
I am trying to upload videos into Blackberry using the Blackberry Desktop Manager software from videos
Section of Media Option.
While i sync the video after setting the Check Option , it is taking considerable time to convert? and upload the videos.
But as soon as i disconnect and see videos in the blackberry , There is not a single video listed there
though it is clearly visible whenever i connect the memory card alone Or BB to Desktop Manager
Not sure what is happening , Please help me
Thanks
AmitHi axsuri,
Are you able to see other media files on the BlackBerry that are stored on your media card? Can you access these videos on the BlackBerry by opening the Media folder, clicking the Menu key and choosing Explore?
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
View video on external HD Monitor in PP 5.0.3
Hi, I'm new to Premiere CS5 and I've been searching for a couple of hours and can't figure out how to playback HD video to an external HD monitor within Premiere Pro 5.0.3 and my Blackmagic Design card. I can see and choose all the Blackmagic presets, view the video in Source and Program monitors in Premiere, but nothing shows up on my Samsung HD monitor. It works in FCP where I can choose from over 2 dozen HD video monitor playback options or Apple Cinema Desktop. Any guidance will be greatly appreciated.
JimGreat suggestions. Thanks for your help. Going back and making sure those settings were in play has given me playback through the Blackmagic card to my monitor!
best,
Jim -
Unable to see video & audio tracks as shown in "Create a sequence or timeline and add audio"
hi,
I'm on the https://helpx.adobe.com/creative-cloud/learn/start/premiere.html page trying to work through the Create a sequence or timeline and add audio tutorial
And cannot see the Video & Audio, as shown in the bottom right sub-window
I'm using a trial version of Premier pro CC downloaded yesterday. On my mac mini running 10.9.2
does anyone know how to fix this problem?
thanks
david
I am able to hear the audio.
Message was edited by: spottedsilvertabbyHi,
Error 7 is when a router or the connection to the router is broken in some way.
Some devices have features such as Denial Of Service protection (DoS) that cut a particular Internet Port when it thinks too much data is coming (Presuming it is an attack.)
iChat 5 in Leopard is not capped by the System Preferences > Quicktime Streaming speed (which we used to suggest was set at 1.5Mbps)
It now sees your whole Connection speed and your Upload may be much faster than this.
Your Download is likely to be much faster. However iChat will tend to operate at the lower figure of your Upload.
DoS features are threshold based.
You may now be bumping in to this Threshold where you were not before.
SPI (Stateful packet Inspection) does a different job but has the same effect when it is overloaded by the speed of the data.
If you have either of these features, turn them Off (Disable them)
7:25 PM Friday; October 2, 2009 -
I have Windows 8 with the updated Flash Player. Whenever I click on a video clip I can see any commercials in advance of the video and I get the audio portion of the actual video clip, but I get a green screen during the video itself. Any suggestions? Thank you.
Green screen is most always caused by outdated or corrupted video drivers. Check them and update if necessary.
-
Unable to see videos copied into sd card
Yesterday I had copied videos from my laptop to my Lumia 1320 sd card and was able to see it. However today I observed message that sd card may be having some problem,connect it to pc to fix the problem.
Later on when I tried to watch videos from sd card, I noticed that those videos were not there.
I dont know what went wrong & I lost my videos.
Can somebody help me to tesolve this issue?Hi, saiprasad3776. What's the exact error message? Can you still view your files when you connect your SD card to your computer? You can also try to use another SD card onto your Lumia 1320 to further isolate the issue. Let us know the outcome.
-
Unable to see videos or music that ive loaded
I've put some music and videos onto the ipad but when i got to view them on the device it shows the library as empty, i plug the ipad back onto the pc and it shows in itunes that the items are on the device, can someone please help....????
I also had the same problem with my iphone 3g.....!!!!
Am I doing something totally stupid...???My guess is that that the file format of the videos are not supported by the iPad or iPhone. How were the videos created and what is the format. By format I mean the general format such as mp4 as well as frame rate, audio format etc. How to those parameters compare with the iPad supported video format listed Apple's technical specification page for the Ipad.
-
Skype webcam buffering - unable to see video
My Skype webcam just started buffering; the skype screen shows a grey screen with the loading circle, but will not load video. My webcam is also doing this, and the person who I was calling said it was happening to them too. I tried to run Microsoft Fix It, but it said Windows 8 wasn't supported. The audio was a bit sketchy as it would run normal audio, and then it would lower significantly before going back up to normal audio again; this happened randomly. This is the first time this has happened to me, and this computer is new; an ASUS ROG G751JT, which I got last december. The video cards seem fine, though I'm not sure if they need to be updated. Like I said before, this is the first time this has happened to me. I'm not sure what I should do, please help. Thanks!
Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.
-
Satellite P200-1EE: HD-DVD issue: Unable to output video to external device
I know this subject has been brought up before but after searching the web on and off for months now I still can't find a solution that works for me.
The problem occurs when trying to use the Toshiba HD-DVD Player to play HD-DVD discs. The program starts but after reading the disc it displays the message +"Unable to output the video to an external device. Please check the external output setting after ending the application."+ and will not play the movie. I'm not sure when this problem first started happening as I went a couple of months without using the HD-DVD feature but I know my laptop was capable of playing the DVD's on both the laptop's display and through the HDMI cable when I first got it just under a year ago.
Toshiba's website mentions this problem and suggests updating the Realtek Audio drivers but I've updated several times now and there has been no change. I've also updated the HD-DVD Player software, also to no avail. The problem is the same regardless of how I try to output the video and occurs on any HD-DVD disc.
I've read that PowerDVD may be a better choice for playing HD-DVD's but I'm rather reluctant to spend the money when it might not work so unless someone can guarantee this as a solution I don't think I'll be trying it.
If anyone could suggest a solution that I haven't yet tried I'd be very grateful.>The program starts but after reading the disc it displays the message "Unable to output the video to an external device. Please check the external output setting after ending the application." and will not play the movie.
Today is your lucky day mate ;) I found a solution!
Here in this thread you can find a link to a Toshiba doc which describes what is going wrong and what you have to do to solve this annoying issue;
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=114726𜀦
It looks like the new sound driver installation will help you to solve this HD-DVD playback problem.
Check it out. -
Unable to output video to external device
I have a Satellite P205 S6337. I keep getting this error message. Pressing the FN+F5 keys do not help.
Unable to output the video to an external device. Please switch your display device by pressing the Fn + F5 keys after ending the application.
The message is listed on the error message page but there is no solution. Support wants to charge me $50.00 to help. Any ideas?Satellite P205-S6337
Error: Unable to output the video to an external device
While playing a video, this error message may be seen when you try to move the video player window from the primary to the secondary display.
You don't say what you're doing when the message occurs.
In any case, try updating the display driver.
Intel Display Driver for Windows Vista (Version 7.14.10.1227 Logo - Released 05/18/07)
Apply the hotfix if you haven't.
Hotfix for Windows Vista - KB945125
-Jerry -
Unable to see Messages in External Definitions
I imported the WSDL below and created a Message Interface based on JobSubmitRequest but, when I come to map to it, all I see in the tree structure is node 'JobSubmitRequest' with elements 'parameter' and 'request_header'.
I also cannot see any messages in External Definitions.
Can anyone help with a solution?
<?xml version="1.0" encoding="UTF-8"?>
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xoa="http://xoa.xpedite.com/2004/11/xoa" xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="http://xoa.xpedite.com/2004/11/xoa">
<types>
<xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://xoa.xpedite.com/2004/11/xoa" xmlns="http://xoa.xpedite.com/2004/11/xoa">
<!-- address type enum -->
<xs:simpleType name="AddressType">
<xs:restriction base="xs:string">
<xs:enumeration value="fax"/>
<xs:enumeration value="internet"/>
<xs:enumeration value="mbox"/>
<xs:enumeration value="x400"/>
<xs:enumeration value="telex"/>
<xs:enumeration value="cablegram"/>
<xs:enumeration value="mailgram"/>
<xs:enumeration value="ddd"/>
<xs:enumeration value="dedLine"/>
<xs:enumeration value="softswitch"/>
<xs:enumeration value="voice"/>
<xs:enumeration value="sms"/>
<xs:enumeration value="fod"/>
<xs:enumeration value="list"/>
<xs:enumeration value="smQuery"/>
</xs:restriction>
</xs:simpleType>
<!--includes for standalone validation
<xs:include schemaLocation="StatusType.xsd"/>
================ -->
<xs:element name="AuthenticateRequest">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="Domain" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<!-- The authenticate result (used to send back results for synchronous and asynchronous requests) -->
<xs:element name="AuthenticateResult">
<xs:complexType>
<xs:sequence>
<xs:element name="Status" type="xoa:StatusType"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<!-- includes for standalone validation
<xs:include schemaLocation="StatusType.xsd"/>
================ -->
<xs:element name="CFSCreateDirRequest">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="SubmitId" type="xs:string"/>
<xs:element name="RelativePath" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="CFSCreateDirResult">
<xs:complexType>
<xs:sequence>
<xs:element name="Status" type="xoa:StatusType"/>
<xs:element minOccurs="0" name="SubmitId" type="xs:string"/>
<xs:element minOccurs="0" name="RelativePath" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<!-- includes for standalone validation
<xs:include schemaLocation="StatusType.xsd"/>
================ -->
<xs:element name="CFSDeleteRequest">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="SubmitId" type="xs:string"/>
<xs:element name="RelativePath" type="xs:string"/>
<xs:element minOccurs="0" name="DeleteDir" type="xs:boolean"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="CFSDeleteResult">
<xs:complexType>
<xs:sequence>
<xs:element name="Status" type="xoa:StatusType"/>
<xs:element minOccurs="0" name="SubmitId" type="xs:string"/>
<xs:element minOccurs="0" name="RelativePath" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<!-- includes for standalone validation
<xs:include schemaLocation="OwnershipLevelType.xsd"/>
<xs:include schemaLocation="StatusType.xsd"/>
<xs:include schemaLocation="Document.xsd"/>
================ -->
<xs:element name="CFSDownloadRequest">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="SubmitId" type="xs:string"/>
<xs:element name="RelativePath" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="CFSDownloadResult">
<xs:complexType>
<xs:sequence>
<xs:element name="Status" type="xoa:StatusType"/>
<xs:element minOccurs="0" name="SubmitId" type="xs:string"/>
<xs:element minOccurs="0" name="RelativePath" type="xs:string"/>
<xs:element minOccurs="0" name="FileData" type="xoa:DocDataType"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<!-- includes for standalone validation
<xs:include schemaLocation="OwnershipLevelType.xsd"/>
<xs:include schemaLocation="StatusType.xsd"/>
<xs:include schemaLocation="Document.xsd"/>
================ -->
<xs:element name="CFSListRequest">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="SubmitId" type="xs:string"/>
<xs:element name="RelativePath" type="xs:string"/>
<xs:element minOccurs="0" name="IncludeSubDir" type="xs:boolean"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:simpleType name="EntryType">
<xs:restriction base="xs:string">
<xs:enumeration value="file"/>
<xs:enumeration value="directory"/>
</xs:restriction>
</xs:simpleType>
<xs:element name="CFSListResult">
<xs:complexType>
<xs:sequence>
<xs:element name="Status" type="xoa:StatusType"/>
<xs:element minOccurs="0" name="SubmitId" type="xs:string"/>
<xs:element minOccurs="0" name="RelativePath" type="xs:string"/>
<xs:element maxOccurs="unbounded" minOccurs="0" name="DirectoryEntry" type="xoa:DirectoryEntryType">
<xs:annotation>
<xs:documentation>content of
DirectoryEntry is path relative to
the RelativePath</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:complexType name="DirectoryEntryType">
<xs:simpleContent>
<xs:extension base="xs:string">
<xs:attribute name="type" type="xoa:EntryType" use="required"/>
<xs:attribute name="modified" type="xs:dateTime" use="optional"/>
<xs:attribute name="size" type="xs:integer" use="optional"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
<!-- includes for standalone validation
<xs:include schemaLocation="StatusType.xsd"/>
================ -->
<xs:element name="CFSRenameRequest">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="SubmitId" type="xs:string"/>
<xs:element name="OldRelativePath" type="xs:string"/>
<xs:element name="NewRelativePath" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="CFSRenameResult">
<xs:complexType>
<xs:sequence>
<xs:element name="Status" type="xoa:StatusType"/>
<xs:element minOccurs="0" name="SubmitId" type="xs:string"/>
<xs:element minOccurs="0" name="OldRelativePath" type="xs:string"/>
<xs:element minOccurs="0" name="NewRelativePath" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<!-- includes for standalone validation
<xs:include schemaLocation="OwnershipLevelType.xsd"/>
<xs:include schemaLocation="StatusType.xsd"/>
<xs:include schemaLocation="Document.xsd"/>
================ -->
<xs:element name="CFSUploadRequest">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="SubmitId" type="xs:string"/>
<xs:element name="RelativePath" type="xs:string"/>
<xs:element name="FileData" type="xoa:DocDataType"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="CFSUploadResult">
<xs:complexType>
<xs:sequence>
<xs:element name="Status" type="xoa:StatusType"/>
<xs:element minOccurs="0" name="SubmitId" type="xs:string"/>
<xs:element minOccurs="0" name="RelativePath" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<!-- ===============================
<xs:include schemaLocation="AddressType.xsd"/>
<xs:include schemaLocation="Document.xsd"/>
<xs:include schemaLocation="EncodableStringType.xsd"/>
<xs:include schemaLocation="OwnershipLevelType.xsd"/>
<xs:include schemaLocation="StatusType.xsd"/>
=============================== -->
<!-- Type definitions -->
<!-- Phone element -->
<xs:element name="Phone">
<xs:simpleType>
<xs:restriction base="xs:string">
<!-- <xs:pattern value="[0-9+x\-() ]{5,20}"/> -->
</xs:restriction>
</xs:simpleType>
</xs:element>
<!-- Email element -->
<xs:element name="Email">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="2"/>
<!-- <xs:pattern value="[@]{1,64}@([@\.]{1,64}\.){1,10}[^@\.]{1,64}"/> -->
</xs:restriction>
</xs:simpleType>
</xs:element>
<!-- Eformat type -->
<xs:simpleType name="EformatType">
<xs:annotation>
<xs:documentation> Only used in messageREACH.
Indicates the preferred email format of the
message body the recipient will receive.
Leaving the field empty or setting it to
"default" will send a multipart message body
rather than just a single message body if
it would do so normally. </xs:documentation>
</xs:annotation>
<xs:restriction base="xs:string">
<xs:enumeration value="text"/>
<xs:enumeration value="html"/>
<xs:enumeration value="htmllite"/>
<xs:enumeration value="default"/>
</xs:restriction>
</xs:simpleType>
<!-- insert list element -->
<xs:element name="InsertList">
<xs:complexType>
<xs:choice>
<xs:element maxOccurs="unbounded" name="Insert">
<xs:complexType>
<xs:simpleContent>
<xs:extension base="xs:string">
<xs:attribute name="number" type="xs:integer"/>
<xs:attribute name="b64charset" type="xs:string" use="optional"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
<!-- extension element -->
<xs:complexType name="SegmentType">
<xs:choice>
<xs:element maxOccurs="unbounded" name="Property">
<xs:complexType>
<xs:simpleContent>
<xs:extension base="xs:string">
<xs:attribute name="name" type="xs:string"/>
<xs:attribute name="b64charset" type="xs:string" use="optional"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
</xs:element>
</xs:choice>
<xs:attribute name="name" type="xs:string"/>
</xs:complexType>
<xs:element name="Extension">
<xs:complexType>
<xs:choice maxOccurs="unbounded">
<xs:element name="Segment" type="xoa:SegmentType"/>
</xs:choice>
</xs:complexType>
</xs:element>
<!-- field mapping type -->
<xs:complexType name="FieldMappingType">
<xs:annotation>
<xs:documentation> Describes the correspondence
between the segment/keyword pairs in the
XDDS header file and columns in a table. Only
two table formats currently supported: CSV
(comma-separated values) and XSL (Excel
spreadsheet). The mapping may go either
from field name to the segment/keyword pair
or vice versa. In both cases, the same
structure may be used. </xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element maxOccurs="unbounded" name="Map">
<xs:complexType>
<xs:sequence>
<xs:element name="FieldName" type="xs:string"/>
<xs:element minOccurs="0" name="SegmentName" type="xs:string"/>
<xs:element name="PropertyName" type="xs:string"/>
<xs:element minOccurs="0" name="IsBase64Encoded" type="xs:boolean"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
<!-- class definitions -->
<!-- delivery item base class -->
<xs:element abstract="true" name="DeliveryItem" type="xoa:DeliveryItemType"/>
<xs:complexType abstract="true" name="DeliveryItemType">
<xs:attribute name="ref" type="xs:string" use="optional"/>
<xs:attribute name="refb64" type="xs:string" use="optional"/>
</xs:complexType>
<!-- new branch -->
<!-- delivery item container class -->
<xs:element abstract="true" name="DeliveryItemContainer" type="xoa:DeliveryItemContainerType"/>
<xs:complexType abstract="true" name="DeliveryItemContainerType">
<xs:complexContent>
<xs:extension base="xoa:DeliveryItemType"/>
</xs:complexContent>
</xs:complexType>
<!-- list delivery item class -->
<xs:element name="List" type="xoa:ListType"/>
<xs:complexType name="ListType">
<xs:complexContent>
<xs:extension base="xoa:DeliveryItemContainerType">
<xs:sequence>
<xs:element name="Name" type="xs:string"/>
</xs:sequence>
<xs:attribute name="ownershipLevel" type="xoa:OwnershipLevelType"/>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- SmQuery delivery item class -->
<xs:element name="SmQuery" type="xoa:SmQueryType"/>
<xs:complexType name="SmQueryType">
<xs:complexContent>
<xs:extension base="xoa:DeliveryItemContainerType">
<xs:sequence>
<xs:element name="Name" type="xs:string"/>
</xs:sequence>
<xs:attribute name="ownershipLevel" type="xoa:OwnershipLevelType"/>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- External table delivery item class -->
<!-- This includes CSV and XLS files -->
<xs:element name="Table" type="xoa:TableType"/>
<xs:complexType name="TableType">
<xs:complexContent>
<xs:extension base="xoa:DeliveryItemContainerType">
<xs:sequence>
<xs:element minOccurs="0" name="FieldMapping" type="xoa:FieldMappingType"/>
<xs:choice>
<xs:element name="DocRef" type="xs:string"/>
<xs:element name="Document" type="xoa:DocumentType"/>
</xs:choice>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- new branch -->
<!-- delivery item simple class -->
<xs:element abstract="true" name="DeliveryItemSimple" type="xoa:DeliveryItemSimpleType"/>
<xs:complexType abstract="true" name="DeliveryItemSimpleType">
<xs:complexContent>
<xs:extension base="xoa:DeliveryItemType">
<xs:sequence>
<xs:element minOccurs="0" name="Alternate">
<xs:complexType>
<xs:choice>
<xs:element ref="xoa:Fax"/>
<xs:element ref="xoa:Internet"/>
<xs:element ref="xoa:Voice"/>
<xs:element ref="xoa:Fod"/>
<xs:element ref="xoa:Mbox"/>
<xs:element ref="xoa:Sms"/>
<xs:element ref="xoa:Telex"/>
<xs:element ref="xoa:DeliveryItemGeneric"/>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- mbox delivery item class -->
<xs:element name="Mbox" type="xoa:MboxType"/>
<xs:complexType name="MboxType">
<xs:complexContent>
<xs:extension base="xoa:DeliveryItemSimpleType">
<xs:sequence>
<xs:element name="UserId" type="xs:string"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- telex delivery item class -->
<xs:element name="Telex" type="xoa:TelexType"/>
<xs:complexType name="TelexType">
<xs:complexContent>
<xs:extension base="xoa:DeliveryItemSimpleType">
<xs:sequence>
<xs:element name="Number" type="xs:string"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- FOD delivery item class -->
<xs:element name="Fod" type="xoa:FodType"/>
<xs:complexType name="FodType">
<xs:complexContent>
<xs:extension base="xoa:DeliveryItemSimpleType">
<xs:sequence>
<xs:element name="Address" type="xs:string"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- SMS delivery item class -->
<xs:element name="Sms" type="xoa:SmsType"/>
<xs:complexType name="SmsType">
<xs:complexContent>
<xs:extension base="xoa:DeliveryItemSimpleType">
<xs:sequence>
<xs:element ref="xoa:Phone"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- new branch -->
<!-- Complex delivery item class -->
<xs:element abstract="true" name="DeliveryItemComplex" type="xoa:DeliveryItemComplexType"/>
<xs:complexType abstract="true" name="DeliveryItemComplexType">
<xs:complexContent>
<xs:extension base="xoa:DeliveryItemSimpleType">
<xs:sequence>
<xs:element minOccurs="0" ref="xoa:InsertList"/>
<xs:element minOccurs="0" ref="xoa:Extension"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- fax delivery item class -->
<xs:element name="Fax" type="xoa:FaxType"/>
<xs:complexType name="FaxType">
<xs:complexContent>
<xs:extension base="xoa:DeliveryItemComplexType">
<xs:sequence>
<xs:element ref="xoa:Phone"/>
<xs:element minOccurs="0" name="Att" type="xoa:EncodableStringType"/>
<xs:element minOccurs="0" name="From" type="xoa:EncodableStringType"/>
<xs:element minOccurs="0" name="To" type="xoa:EncodableStringType"/>
<xs:element minOccurs="0" name="Salutation" type="xs:string"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- voice delivery item class -->
<xs:element name="Voice" type="xoa:VoiceType"/>
<xs:complexType name="VoiceType">
<xs:complexContent>
<xs:extension base="xoa:DeliveryItemComplexType">
<xs:sequence>
<xs:element ref="xoa:Phone"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- internet delivery item class -->
<xs:element name="Internet" type="xoa:InternetType"/>
<xs:complexType name="InternetType">
<xs:complexContent>
<xs:extension base="xoa:DeliveryItemComplexType">
<xs:sequence>
<xs:element ref="xoa:Email"/>
<xs:element minOccurs="0" name="Subject" type="xoa:EncodableStringType"/>
<xs:element minOccurs="0" name="From" type="xoa:EncodableStringType"/>
<xs:element minOccurs="0" name="Eformat" type="xoa:EformatType"/>
<xs:element minOccurs="0" name="Password" type="xs:string">
<xs:annotation>
<xs:documentation> Only used in
messageREACH. The password used
by this recipient to retrieve
pull attachments. </xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- fax delivery item class -->
<xs:element name="DeliveryItemGeneric" type="xoa:DeliveryItemGenericType"/>
<xs:complexType name="DeliveryItemGenericType">
<xs:complexContent>
<xs:extension base="xoa:DeliveryItemComplexType">
<xs:sequence>
<xs:element name="Address" type="xs:string"/>
</xs:sequence>
<xs:attribute name="type" type="xoa:AddressType" use="required"/>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- Finally, delivery item list -->
<!-- delivery item list type -->
<xs:complexType name="DeliveryItemListType">
<xs:choice maxOccurs="unbounded">
<xs:element ref="xoa:List"/>
<xs:element ref="xoa:SmQuery"/>
<xs:element ref="xoa:Table"/>
<xs:element ref="xoa:DeliveryItemGeneric"/>
<xs:element ref="xoa:Fax"/>
<xs:element ref="xoa:Internet"/>
<xs:element ref="xoa:Voice"/>
<xs:element ref="xoa:Fod"/>
<xs:element ref="xoa:Mbox"/>
<xs:element ref="xoa:Sms"/>
<xs:element ref="xoa:Telex"/>
</xs:choice>
</xs:complexType>
<!--remove includes later
<xs:include schemaLocation="AddressType.xsd"/>
================ -->
<xs:complexType name="DestinationType">
<xs:simpleContent>
<xs:extension base="xs:string">
<xs:attribute name="type" type="xoa:AddressType"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
<!-- ===============================
<xs:include schemaLocation="OwnershipLevelType.xsd"/>
=============================== -->
<!-- Elementary definitions go first -->
<xs:element name="CharacterSet" type="xs:string">
<xs:annotation>
<xs:documentation>use ISO names</xs:documentation>
</xs:annotation>
</xs:element>
<!-- Document type -->
<xs:simpleType name="DocFormatType">
<xs:restriction base="xs:string">
<xs:enumeration value="text"/>
<xs:enumeration value="XMF"/>
<xs:enumeration value="TIFF"/>
<xs:enumeration value="XAR"/>
<xs:enumeration value="PS"/>
<xs:enumeration value="PCL"/>
<xs:enumeration value="PDF"/>
<xs:enumeration value="MSW"/>
<xs:enumeration value="WAV"/>
<xs:enumeration value="RTF"/>
<xs:enumeration value="XLS"/>
<xs:enumeration value="HTML"/>
<xs:enumeration value="HTMLLITE"/>
<xs:enumeration value="unspec"/>
<xs:enumeration value="GIF"/>
<xs:enumeration value="JPEG"/>
<xs:enumeration value="PPT"/>
<xs:enumeration value="BMP"/>
<xs:enumeration value="VSD"/>
<xs:enumeration value="PUB"/>
<xs:enumeration value="MPP"/>
<xs:enumeration value="empty"/>
<!-- We do not need to know the document type for the -->
<!-- email attachments. -->
</xs:restriction>
</xs:simpleType>
<!-- Document Encoding format -->
<xs:simpleType name="DocEncodingFormat">
<xs:restriction base="xs:string">
<xs:enumeration value="text"/>
<xs:enumeration value="base64"/>
</xs:restriction>
</xs:simpleType>
<!-- Document embedded into the request -->
<xs:complexType name="DocDataType">
<xs:simpleContent>
<xs:extension base="xs:string">
<xs:attribute name="format" type="xoa:DocEncodingFormat" use="required"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
<!-- All supported stored object types -->
<xs:simpleType name="SosObjectType">
<xs:restriction base="xs:string">
<xs:enumeration value="tts"/>
<xs:enumeration value="vcs"/>
</xs:restriction>
</xs:simpleType>
<!-- The types of the sos stored objects -->
<xs:complexType name="SosObjectIdType">
<xs:simpleContent>
<xs:extension base="xs:string">
<xs:attribute name="sosType" type="xoa:SosObjectType" use="required"/>
<xs:attribute name="ownershipLevel" type="xoa:OwnershipLevelType"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
<!-- Another Document type -->
<xs:complexType name="DocumentType">
<xs:sequence>
<xs:element name="DocType" type="xoa:DocFormatType"/>
<xs:element minOccurs="0" name="Filename" type="xs:string"/>
<xs:choice>
<xs:element name="DocData" type="xoa:DocDataType"/>
<xs:element name="DocCfs" type="xs:string"/>
<xs:element name="DocUrl" type="xs:anyURI"/>
<xs:element name="SosObject" type="xoa:SosObjectIdType"/>
</xs:choice>
<xs:element minOccurs="0" ref="xoa:CharacterSet"/>
</xs:sequence>
<xs:attribute name="ref" type="xs:string" use="optional"/>
</xs:complexType>
<!-- The document set type -->
<xs:complexType name="DocumentSetType">
<xs:sequence>
<xs:element maxOccurs="unbounded" minOccurs="0" name="Document" type="xoa:DocumentType"/>
</xs:sequence>
</xs:complexType>
<!-- The document by value or by reference -->
<xs:complexType name="DocumentOrRefType">
<xs:choice>
<xs:element name="DocRef" type="xs:string">
<xs:annotation>
<xs:documentation>must refer to a document
in document_set</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="Document" type="xoa:DocumentType"/>
</xs:choice>
</xs:complexType>
<xs:complexType name="EncodableStringType">
<xs:simpleContent>
<xs:extension base="xs:string">
<xs:attribute name="b64charset" type="xs:string" use="optional"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
<!--includes for standalone validation
================ -->
<xs:simpleType name="HistoryActionType">
<xs:restriction base="xs:string">
<xs:enumeration value="inserted"/>
<xs:enumeration value="updated"/>
<xs:enumeration value="deleted"/>
</xs:restriction>
</xs:simpleType>
<xs:complexType name="ItemCountType">
<xs:simpleContent>
<xs:extension base="xs:integer">
<xs:attribute name="type" type="xoa:HistoryActionType"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
<xs:complexType name="HistoryType">
<xs:sequence>
<xs:element name="Action" type="xs:string"/>
<xs:element name="Operator" type="xs:string"/>
<xs:element name="Agent" type="xs:string"/>
<xs:element name="Time" type="xs:dateTime"/>
<xs:element name="ItemCount" type="xoa:ItemCountType"/>
</xs:sequence>
</xs:complexType>
<!-- ================
<xs:include schemaLocation="AddressType.xsd"/>
<xs:include schemaLocation="DestinationType.xsd"/>
<xs:include schemaLocation="Document.xsd"/>
<xs:include schemaLocation="JobIdType.xsd"/>
<xs:include schemaLocation="OwnershipLevelType.xsd"/>
<xs:include schemaLocation="StatusType.xsd"/>
<xs:include schemaLocation="RecStatusType.xsd"/>
================ -->
<xs:simpleType name="JobCancelType">
<xs:annotation>
<xs:documentation>The set of cancellation types/options</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:string">
<xs:enumeration value="All"/>
<xs:enumeration value="Deliveries"/>
<xs:enumeration value="Reports"/>
<xs:enumeration value="AcceptanceReport"/>
<xs:enumeration value="CancellationNotice"/>
<xs:enumeration value="Pulls"/>
<xs:enumeration value="FriendDeliveries"/>
</xs:restriction>
</xs:simpleType>
<xs:complexType name="JobCancelItemType">
<xs:sequence>
<xs:element name="JobId" type="xoa:JobIdType">
<xs:annotation>
<xs:documentation>requested JobId</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element minOccurs="0" name="CancelType" type="xoa:JobCancelType"/>
<xs:element minOccurs="0" name="NotificationAddress" type="xoa:DestinationType"/>
<xs:choice minOccurs="0">
<xs:element name="NotificationType" type="xs:string"/>
<xs:element name="NotificationText" type="xoa:DocDataType"/>
</xs:choice>
</xs:sequence>
</xs:complexType>
&Hi,
Not all data types from WSDL are supported during import. There is SAP Note about it.
please read it:
/people/kevin.liu/blog/2005/10/07/a-note-on-wsdl-and-xsd-imports--part-ii
regards,
wojtek
Message was edited by: Wojciech Gasiorowski -
Unable to see effect changes in program monitor
Hi Guys,
I have tried applying an effect (3 way color corrector) onto a clip. When clicking on the white balance dopper and then onto the frame in the program view, the colour of the white balance changes to that colour, but the clip itself in the program view is unchanged. I cant see the adjustment. Am I missing something simple such as a setting or is there a bug?
Thanks for any advice.
JamesI said colour; e.g. red.
The white balance is for the highlights , maybe there are few highlights in your picture. Slide the upper slides of the tonal range definition to the left and see what happens. The highlights should turn blueish
Maybe you are looking for
-
How can I get songs back on an album that are lost?
I recently bought an album on itunes and it downloaded on to "family" account. I then downloaded my purchased content on to my phone with no trouble. When I later went to listen to the album, I could only listen to 1 out of the 12 songs. All the othe
-
Power button doesn't work after new update...and that's the least of it
Ever since I updated my 4S with the new software my phone has had so many problems: Power button no longer works. I have to hold both the home button down and the power button to "reset" my phone to turn it off. I am having to do this CONSTANTLY b/c
-
BEx Variable default value does not pass thru to Webi report
Hi, It appears that the integration between BEx and BOBJ Webi does not support default values when the webi report is scheduled. This means that if Webi/Infoview is the delivery method, than clients require 2 reports. 1 for adhoc and 1 for scheduli
-
Hi Could somone please let me know what is the problem with this statement. It works fine without the "on error" extension of the statement. ThanksMAXL> import database "MYAPPLIC"."Mydatabs" data connect as "myself" identified by "myself1" using rule
-
Acrobat Standard X - Alignment & Sizing
When I highlight and try to align or size text fields, it makes copies of them on top of each other rather than doing what I want. Any idea on a setting I am missing or something that I am doing incorrectly?