GG with imp operation

Hi,
Can any one clarify on this,
Im using oracle GG replication, What is the process mechanism for importing the data from export dump file in to tables, Whether GG can able to handle the import operation? I need to import the table data in the source database whether the same operation will replicat the target side.
Thanks in Advance
Annamalai.

Hi.
By default the Oracle import will be replicated by extract. Extract does not yet support Tags as Streams does. However, if you wish to ignore the import then use TRANLOGOPTIONS IGNOREUSER and perform the import as this user.
Good luck,
-joe

Similar Messages

Firefox prompted me to download an incompatible update that its website claims is compatible with my operating system (Mac OS 10.4.11). Why prompt an incompatible download AND claim it is compatible?

I have an iMac and use OS 10.4.11 & Firefox 3.6.19. Firefox prompted me to download an update (to 7.0.1). I looked up the system requirements on your website, and it stated the update is compatible with OS 10.4.11. But after I downloaded and installed the update, it failed to work on grounds of incompatibility. Hence 2 questions: (1) Why did Firefox prompt me to download an incompatible update? (2) Why did your website claim the update is compatible with my operating system when it is not?

Sorry, it's because Firefox 4+ are only compiled for the Intel processors.
There is a separate project for PPC Macs called Ten Four Fox. You might give it a spin when you're tired of 3.6.
http://www.floodgap.com/software/tenfourfox/

How do I access "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...." web sites; when I try to download any alternate browser, then a warning that alternate is "imcompatable with your opera

How do I access websites that warn: "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...."? When I try to download any alternate browser, all I get is another warning that the alternate is "not compatible with your operating system." Is Firefox preventing this? The site listed below is a job application site. I've had this same problem with other job application sites also.
== URL of affected sites ==
https://storefront.kenexa.com/lithia/cc/Home.ss

There should be a User Agent Switcher menu item under Tools, which gives you the browser names you can impersonate.
The menu item name changes to the browser UA you are presently using.
There is also a User Agent Switcher button, you can add it using View -> Toolbars -> Customize, and dragging the button to your toolbar.
See http://chrispederick.com/work/user-agent-switcher/features/ and http://chrispederick.com/work/user-agent-switcher/help/
You can just start trying IE versions (or the versions it says on the site) until it lets you in.

How to use tree tables with CRUD operation for begineers ADF 11g

This is Friday night call for help.
This is only few sample ressources on the web for tree table and only one with CRUD operation.
I used this one http://jobinesh.blogspot.com/2010/05/crud-operations-on-tree-table.html because this is the only one that address CRUD.
And it is shaky. Deletion works fine but insertion not very well. This is working using custom code provided below.
Depending if the user selection in the tree, the code insert from the master node to the children node.
Any other options because it is not working well.
Also where Oracle describes how to use the row, rowset, itorator API? This is really hard to understand like almost if we should not use it.
then if not how can I insert in tree with two nodes and insert in the parent or children depending the users selection.
Lately I 'been posting questions on this forum with no response. This hurts. I understand developers cannot spend their time on this but People from Oracle, please help. We pay licenses...
public void createChildren(RowIterator ri, Key selectedNodeKey) {
final String deptViewDefName = "model.DepartmentsView";
final String empViewDefName = "model.EmployeesView";
if (ri != null && selectedNodeKey != null) {
Row last = ri.last();
Key lastRowKey = last.getKey();
// if the select row is not the last row in the row iterator...
Row[] found = ri.findByKey(selectedNodeKey, 1);
if (found != null && found.length == 1) {
Row foundRow = found[0];
String nodeDefname =
foundRow.getStructureDef().getDefFullName();
if (nodeDefname.equals(deptViewDefName)) {
RowSet parents =
(RowSet)foundRow.getAttribute("EmployeesView");
Row childrow = parents.createRow();
parents.insertRow(childrow);
} else {
RowSet parents =
(RowSet)foundRow.getAttribute("EmployeesView");
Row childrow = parents.createRow();
childrow.setAttribute("DepartmentId",
foundRow.getAttribute("DepartmentId"));
parents.insertRow(childrow);
} else {
System.out.println("Node not Found for " + selectedNodeKey);
}

I am looking for a sample that describe how to design a jsf page with a tree table.
So you have Department and employees. In the tree first comes Department and if you click the node you see the employees assigned to this department.
I need to be able to insert a new department or a new employee from the tree table by clicking on a insert button in the panel collection toolbar depending on user selection in the tree.
I got part of it working but not good enough.
By problem is the get insertion working
I have a createChildren method in my AM implementation that get in input a RowIterator and selected node key.
To goal is to create new records depending of the user selection and the input parameters get populated by the binding like this:
#{backing_treeSampleBean.selectedNodeRowIterator} #{backing_TreeSampleBean.selectedNodeRowkey} via method binding with parameters.
Is it the right approach?
First to be able to insert a parent record, I select nothing in the tree and ri and selectedNodeKey comes to null
we run this code
ViewObjectImpl vo = getSchHolidaySchedExceptionsView1();
//ViewObjectImpl vo = getDepartmentsView1();
Row foundRow = vo.first();
Row childrow = vo.createRow();
vo.insertRow(childrow);
A new blank entry appears in the parent node and we enter a value.
The the problem starts when we want to add a child to this parent.
We select the created parent and press the insert button, this code get executed
if (nodeDefname.equals(deptViewDefName))
//list of the children of the parent and create an new row
RowSet childRows = (RowSet)foundRow.getAttribute("SchHolidayExceptionDatesView");
Row childrow = childRows.createRow();
childRows.insertRow(childrow);
But the new entry does not appear, it is almost like it would be created for a different parent because this is a mandatory field that is not feel in yet and the interface complaints of a missing value. It is created somewhere just not a the right place... This is my guess.
Do you see something wrong with the code?
The full code og my create children method is there below
I am using jdeveloper 11.1.1.3.0 any issues with tree table to know about with this version?
Thanks for your help
public void createChildren(RowIterator ri, Key selectedNodeKey) {
final String deptViewDefName = "com.bcferries.app.pdfroutesched.model.SchHolidaySchedExceptionsView";
final String empViewDefName = "com.bcferries.app.pdfroutesched.model.SchHolidayExceptionDatesView";
if (ri != null && selectedNodeKey != null) {
// last row
Row last = ri.last();
Key lastRowKey = last.getKey();
// if the select row is not the last row in the row iterator...
Row[] found = ri.findByKey(selectedNodeKey, 1);
if (found != null && found.length == 1) {
// foundRow is the row selected
Row foundRow = found[0];
// The row selected can be the parent node or the child node
String nodeDefname = foundRow.getStructureDef().getDefFullName();
// if parent row
if (nodeDefname.equals(deptViewDefName))
//list of the children of the parent and create an new row
//works but we try to resolve the creation of a parent
RowSet childRows = (RowSet)foundRow.getAttribute("SchHolidayExceptionDatesView");
Row childrow = childRows.createRow();
//childrow.setAttribute("HolidayDate", new java.util.Date().getDate());
System.out.println("insert child row from master");
childRows.insertRow(childrow);
} else
//RowSet ParentRow = (RowSet)foundRow.getAttribute("SchHolidaySchedExceptionsView");
//RowSet childRows = (RowSet)ParentRow.first().getAttribute("SchHolidayExceptionDatesView");
Row childrow = ri.createRow();
System.out.println("insert child row from child ");
} else {
System.out.println("Node not Found for " + selectedNodeKey);
} else {
System.out.println(" param null try creating for first row : " +
ri + " * " + selectedNodeKey);
ViewObjectImpl vo = getSchHolidaySchedExceptionsView1();
Row foundRow = vo.first();
Row childrow = vo.createRow();
vo.insertRow(childrow);
}

Problem with multiple sub-panels through Enum case structure: "The VI is not in a state compatible with this operation"

Hello,
I am using LabVIEW 8.0 and I am attempting to create a sub-panel that displays the front panel of a sub-vi depending on the selection made by the user via the Enum dropdown menu. I have wired the Enum to a case structure and applied identical coding to each individual case structure except for obviously changing the sub-vi source. However, I receive an error "The VI is not in a state compatible with this operation." I was able to successfully make a single sub-vi work within a sub-panel using a true/false case structure and the exact same coding. However, now that I am using an Enum box wired to a case structure, I receive this error. I have attached my block diagram as well. Could anyone assist me as to where it is that I am going wrong?
Thanks in advance!
Solved!
Go to Solution.
Attachments:
enum subpanels.JPG ‏22 KB

torm wrote:
I have attached my block diagram as well
I only see a picture. Can you attach the VI instead? At what point do you close the reference?
torm wrote:
I have wired the Enum to a case structure and applied identical coding to each individual case structure except for obviously changing the sub-vi source.
Well, if the code is identical except for the source, only the source should be inside the case, right? Why duplicate code?
LabVIEW Champion . Do more with less code and in less time .

I am running Mac OS X 10.5.8 and I cannot download Firefox 4 because it says it is incompatible with my operating system, although supposedly it is compatible with OS X 10.5

I would like to download Firefox 4. I get an error message during download saying it is incompatible with my operating system and that it needs OS X 10.5 or 10.6 but I AM using 10.5.8, so what might be the problem?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

Why does it say that the updated version of Firefox (which I am trying to download) is not compatible with my operating system when I have Mac OS X 10.5.8?

Why does it say that the updated version of Firefox (which I am trying to download) is not compatible with my operating system when I have Mac OS X 10.5.8? I had an older version of Firefox and it said I needed to update it but that was the message that appeared.

Sorry, it's because Firefox 4+ are only compiled for the Intel processors.
There is a separate project for PPC Macs called Ten Four Fox. You might give it a spin when you're tired of 3.6.
http://www.floodgap.com/software/tenfourfox/

Receiving Error : Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables. while trying to create a new Customer.

Hi All,
We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
Your help is appreciated!
Thanks in advance,
SKA

You can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks

Null pointer Exception with removeRowWithKey operation

Hii experts,,,
I am using JDevelepor 11.1.2.1.0 Version
I Am new in ADF ,
In My sample application i select row in iterator by findIterator() method
then get the specified row by getCurrentRow();
then i get the rowKey By row.getKey() method..
I put rowKey as parameter to removeRowWithKey operation
I have get null pointer Exception with removeRowWithKey operation
java.lang.NullPointerException
     at oracle.jbo.server.ViewRowSetImpl.prepKeyForFind(ViewRowSetImpl.java:5352)
     at oracle.jbo.server.ViewRowSetImpl.findByKey(ViewRowSetImpl.java:5394)
     at oracle.jbo.server.ViewRowSetImpl.findByKey(ViewRowSetImpl.java:5296)
     at oracle.jbo.server.ViewRowSetImpl.findByKey(ViewRowSetImpl.java:5290)
     at oracle.jbo.server.ViewObjectImpl.findByKey(ViewObjectImpl.java:11536)
     at oracle.adf.model.binding.DCIteratorBinding.removeRowWithKey(DCIteratorBinding.java:3748)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1598)
how can solve this???

thanks Timo
through this URL i get possible deletion methods...
pls give more Information about the concept of removeRowWithKey, setCurrentRowWithKey, setCurrentRowWithKeyValue operation.... Just For Knowledge....
Edited by: NZL on Mar 2, 2012 9:37 AM
Edited by: NZL on Mar 2, 2012 9:42 AM

Mapping in Services Interface with multiple operation... ?

Hi ALL,
I have a SOAP to SOAP scenario here Just PI 7.1 with EHP1 acting a bus no mapping nothing .
1) I have the WSDL file from the receiver system with multiple synchronous operations in it ..i imported the wsdl as External Definition .. i used the same the WSDL file to create the sender Service interface also...
when i created the service interface with the operation in it , i just gave the same operation name from the WSDL.this i followed for the sender and receiver service interface.
1)now the issue is do i need any operation mapping if the service interface has more than one operation ...?
2) I compelted the scenario without any operation mapping ..but i am getting this error ..Problem occurred in receiver agreement for sender -ICRM_D to receiver -EXACTTGETWEBSERVICE_D,http://ICRMtoExactTaetWebservice.com.si_os_ICRM_EXACTTETWEBSERVICE: No standard agreement found for , ICRM_D, , EXACTTARGEBSERVICE_D, http://ICRMtoExactarebservice.com, si_os_ICRM_EXACGETWEBSERVICE..?
pls help me in this issue..
Thanks
Souz

you might want to read this /people/shabarish.vijayakumar/blog/2010/09/08/service-interface-and-multiple-operations--is-it-just-an-hype
you will need to create additional configurations for multiple operations to be supported

Mapping with Scd operator set to type 2 reading source records two times

Mapping with Scd operator set to type 2 reading source records two times.Records selected count being displayed at the end of execution is double the source record count.This possibly is affecting the performance of the mapping.
Is this a bug in scd type 2 operagtor in OWB 11gR2.How to rectify this umwamted double loop through the source data selectiom?

Hi Roelant,
I think it is important to be aware that although Paris - 10gR2 - is not actually buggy (in this respect!), it is really quite idiosyncratic in exactly how it processes SCDs.
I followed up on your and Mark's comments, and did an in depth analysis of this topic. It is at http://www.donnapkelly.pwp.blueyonder.co.uk/documents/OWB_10gR2_SCD.pdf
My conclusions are perhaps of interest to anyone considering doing SCD processing with Paris.
I'll be doing a follow-up this weekend, and publishing a sort of 'how-to-do-it' guide.
Cheers,
Donna
Message was edited to add the words: "in this respect"

Need file adapter polling with read operation to be triggered by a BPEL without using synchronous read

The scenario is:-
Web Service Client -->input-->BPEL-->if input valid-->trigger file adapter with read operation--> receive file
i am not able to stop the polling until it is required to trigger the polling.
As soon as i deploy the composite the file adapter starts polling without waiting for input.
Since i am using two receive activities, the second one which is suppose to receive file from file adapter is always showing pending state. (asynchronous callback)

Hi there,
IMHO the traditional read is used only as inbound operation, that means
that it starts polling the input folder as soon as the composite gets
deployed - which is the same you are experiencing.
In your case you need an outbound operation that needs to be invoked at
a certain moment. I don't know what are the reasons not to use sync
read, but this is the only outbound read operation supported by the
adapter. If you can not use the sync read, then you would have to design
some custom solution where you call a web service or EJB for instance
that reads the desired files.
Another option I can think of, though have not use personally is using
the adapters programatically in Java - take a look at this blog post as
it seems related to this topic -
https://technology.amis.nl/2012/01/22/using-the-oracle-weblogic-technology-adapters-with-custom-java-message-driven-bean-mdb-triggered-by-file-adapter-part-of-the-story/.
Hope this helps,
A.

How do I delete a number of duplicate tunes with one operation?

How do I delete a number of duplicate tunes with one operation?

See here: https://discussions.apple.com/thread/3293239?start=0&tstart=0
B-rock

Problem with imp

HI All,
We are facing some problem with imp. What we are trying to do is to import one table from full exp backup.
Below is my exp script:
compress </nhi3/export/epipe > /nhi3/export/exp-nov.dmp.Z &
exp holland/kangra file=/nhi3/export/epipe full=y compress=n buffer=250000 log=/nhi3/export/exp.log
Now iam trying to import one table from full exp backup using the below script.
P6DB NODE>uncompress < /rmanbkp/backup/export0402/export/exp-nov.dmp.Z > /nhi3/export/epipe &
[1] 3190958
P6DB NODE>imp holland/kangra file=/nhi3/export/epipe fromuser=baan touser=baan tables='TTIPSL042100' ignore=n log=/rmanbkp/backup/export0402/export/ttipsl042100.log indexes=n full=n
After firing this command there is no response from the terminal and nothing is showing in the imp logfile.
Only response i can see is:
P6DB NODE>imp holland/kangra file=/nhi3/export/epipe fromuser=baan touser=baan tables='TTIPSL042100' ignore=n log=/rmanbkp/backup/export0402/export/ttipsl042100.log indexes=n full=n
Import: Release 10.2.0.4.0 - Production on Mon Apr 2 12:42:28 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V10.02.01 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
Need Help
Thanks,
Sandy

Hi,
Just to start eliminating potential error sources, what if you do the uncompress to file, and then try to import using that file?
Also, since you do a full export, it might take a while for the uncompress to reach the schema and table you're trying to import.
HtH
Johan

One file maximum for uploads with Safari, Opera, FireFox and Chrome to OneDive

Some Windows 7 users have complained to they can only mark one file maximum for uploading with Safari, Opera, FireFox and Chrome to OneDive

Hi,
You mean that you access OneDrive via web browser?
From my tests, everything is normal and it seems there is no setting in browser to configure this number.
if I misunderstand this issue, please give us more information on it.
Alex Zhao
TechNet Community Support

GG with imp operation

Similar Messages

Maybe you are looking for