GGS ERROR 150 Oracle GoldenGate Manager for Oracle, mgr.prm: Addre

Hi,
I am not able to start manager process in golden gate.
Program Status Group Lag Time Since Chkpt
MANAGER STOPPED
EXTRACT ABENDED EXT1OP0 00:00:00 19:20:29
EXTRACT ABENDED PMP1OP0 00:00:00 19:17:36
ES option not used.).
2012-08-12 23:19:55 GGS ERROR 150 Oracle GoldenGate Manager for Oracle, mgr.prm: Address already in use.
2012-08-12 23:19:55 GGS ERROR 190 Oracle GoldenGate Manager for Oracle, mgr.prm: PROCESS ABENDING.
2012-08-12 23:46:36 GGS INFO 399 Oracle GoldenGate Command Interpreter for Oracle: GGSCI command (ggs): start EXT1OP0.
2012-08-12 23:55:02 GGS INFO 399 Oracle GoldenGate Command Interpreter for Oracle: GGSCI command (ggs): start MANAGER.
2012-08-12 23:55:02 GGS WARNING 201 Oracle GoldenGate Manager for Oracle, mgr.prm: purgeoldextracts /opt/ggs/data01/op00/trail/sc,usecheckpoints,minkeepdays 6 (MINKEEPFILES option not used.).
2012-08-12 23:55:02 GGS ERROR 150 Oracle GoldenGate Manager for Oracle, mgr.prm: Address already in use.
2012-08-12 23:55:02 GGS ERROR 190 Oracle GoldenGate Manager for Oracle, mgr.prm: PROCESS ABENDING.

user23 wrote:
Hi,
I am not able to start manager process in golden gate.
Program Status Group Lag Time Since Chkpt
MANAGER STOPPED
EXTRACT ABENDED EXT1OP0 00:00:00 19:20:29
EXTRACT ABENDED PMP1OP0 00:00:00 19:17:36
2012-08-12 23:19:55 GGS ERROR 150 Oracle GoldenGate Manager for Oracle, mgr.prm: Address already in use.the port number you specified in your dirprm/mgr.prm file is already in use by another process. Change the port number (or kill the other process) and try to restart mgr.
ggsci> view param mgr
PORT 7811
ggsci> edit param mgr
(change to unused port, save)
ggsci> start mgr
ggsci> view report mgr

Similar Messages

ERROR OGG-00868 Oracle GoldenGate Capture for Oracle, ext1.prm: + ORA-12514

Hello Guys,
Environment is as below:
Primary site (source): This is production DB and up and running.
RAC 2 nodes
Oracle RAC 11.2.0.1.0
ASM
Enterprise Linux Server release 5.5 (Carthage)
target Site (destination): Software installed and instance has been created.
Standalone single server - Non RAC
Oracle 11.2.0.1.0
ASM
Enterprise Linux Server release 5.5 (Carthage)
Oracle GoldenGate 11g Release 1 (11.1.1)
I have installed and setup Oracle GoldenGate 11g Release 1 (11.1.1) But I am getting below error while starting extract:
2011-05-01 21:27:41 INFO OGG-00987 Oracle GoldenGate Command Interpreter for Oracle: GGSCI command (oracle): edit params ext1.
2011-05-01 21:29:11 INFO OGG-00987 Oracle GoldenGate Command Interpreter for Oracle: GGSCI command (oracle): start extract ext1.
2011-05-01 21:29:11 INFO OGG-00963 Oracle GoldenGate Manager for Oracle, mgr.prm: Command received from GGSCI on host xxx.xx.x.4 (START EXTRACT EXT1 ).
2011-05-01 21:29:11 INFO OGG-00975 Oracle GoldenGate Manager for Oracle, mgr.prm: EXTRACT EXT1 starting.
2011-05-01 21:29:11 INFO OGG-00992 Oracle GoldenGate Capture for Oracle, ext1.prm: EXTRACT EXT1 starting.
2011-05-01 21:29:11 INFO OGG-01635 Oracle GoldenGate Capture for Oracle, ext1.prm: BOUNDED RECOVERY: reset to initial or altered checkpoint.
2011-05-01 21:29:12 ERROR OGG-00868 Oracle GoldenGate Capture for Oracle, ext1.prm: Attaching to ASM server asm: (12514) ORA-12514: TNS:listener does not currently know of service requested in connect descriptor.
2011-05-01 21:29:12 ERROR OGG-01668 Oracle GoldenGate Capture for Oracle, ext1.prm: PROCESS ABENDING.can anyone tell me how to edit listener.ora for ASM instance so that it may capture data from instance.
Below is the listener.ora :
$ cat listener.ora
LISTENER_SCAN3=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3)))) # line added by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))) # line added by Agent
LISTENER_SCAN2=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2)))) # line added by Agent
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3=ON # line added by Agent
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = +ASM1)
(ORACLE_HOME = /u01/app/11.2.0/grid)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = +ASM2)
(ORACLE_HOME = /u01/app/11.2.0/grid)
$$ cat tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ASM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = xxxdata-scan)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = +ASM2)
$your response will be highly appreciated.
Cheers !!!
LazyDBA11g
Edited by: LazyDBA11g on May 5, 2011 11:16 PM
Edited by: LazyDBA11g on May 22, 2011 5:24 AM
Edited by: LazyDBA11g on May 22, 2011 5:29 AM
Edited by: LazyDBA11g on May 30, 2011 10:46 PM

Hi,
I installed GG with same configuration and i didn't configure ASM statically in listener.ora at all:
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line added by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
When i check listener status, i can see that ASM Instance is correctly registered:
$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 26-MAY-2011 15:41:48
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 16-MAY-2011 13:17:17
Uptime 10 days 2 hr. 24 min. 31 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /opt/oracle/grid/11.2.0.2/network/admin/listener.ora
Listener Log File /opt/oracle/base/diag/tnslsnr/pollux/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xx.xxx.xxx.92)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xx.xxx.xxx.94)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Service "R112" has 1 instance(s).
Instance "R1121", status READY, has 1 handler(s) for this service...
Service "R112XDB" has 1 instance(s).
Instance "R1121", status READY, has 1 handler(s) for this service...
The command completed successfully
You need to make sure, that ASM registers dynamically with your listener. In my case i have set local_listener in ASM instance as follows:
SQL> show parameter local_listener
NAME TYPE VALUE
local_listener string (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=xx.xxx.xxx.94)(PORT=1521))))
This is no GG specific question. You need this for other tools like Gridcontrol as well.
Hope this helps,
Robert

OGG-01028 Oracle GoldenGate Delivery for Oracle, rep_2.prm: Incompatible record (101)

1. After imported data,i want start rep_2 at a CSN point but it dosn't work
2013-09-13 20:22:15 ERROR OGG-01028 Oracle GoldenGate Delivery for Oracle, rep_2.prm: Incompatible record (101) in ./dirdat/r2000000, rba 86102323 (getting header).
2013-09-13 20:22:15 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rep_2.prm: PROCESS ABENDING.
2.
So i try many times ,i want the rep_2 to find a avalibale file to start(ignore some file )
ALTER REPLICAT rep_2, EXTSEQNO X
Still comes OGG-01028
3.
Logdump 3 >open ./dirdat/r2000000
Current LogTrail is /home/oracle/ogg/dirdat/r2000000
Logdump 4 >ghdr on
Logdump 5 >count
I didn't find any bad rows
So somebody help!!!

[oracle@p49drzdb dirprm]$ cat rep_2.prm
REPLICAT rep_2
SETENV (NLS_LANG=AMERICAN_AMERICA.AL32UTF8)
USERID ogg, PASSWORD ogg
ASSUMETARGETDEFS
DBOPTIONS SUPPRESSTRIGGERS
ddl include all
DDLERROR DEFAULT DISCARD IGNOREMISSINGOBJECTS
REPERROR (DEFAULT, DISCARD)
DISCARDFILE ./dirrpt/rep_r2.DSC, PURGE
MAP ...

How to install Oracle BPEL Process Manager for OracleAS Middle Tier

hi,
i need to install BPEL process manager, so i download the following file from otn
1.soa_windows_x86_101310_disk1
2.soa_windows_x86_bpel_101310
here i read the document named b28980.pdf from bpel\doc\pc.1012 to install BPEL PM
so i start to complete the pre-installation task
1.installed Oracle database 10g
2.Run the Integration Repository Creation Assistant on the Database
3.Install Oracle Application Server 10g Release3 (10.1.3.1.0) and select either the J2EE Server installation type or the J2EE and Web Server installation type. selected J2EE and Web Server installation type
and installed according to the Oracle application server installation guide.
installed OracleAS in the path : D:\product\10.1.3.1\OracleAS_1
4.Install the current release of Oracle BPEL Process Manager for OracleAS Middle Tier
here they mention to select the J2EE and Web Server installation type because that type is selected in Oracle AS installed in Oracle Application Server
so i start to install the BPEL PM by selecting the setup.exe-->and shows the location source and destination
default destination is : D:\product\10.1.3.1\OraBPEL_1 selected next on the screen
the next screen is select installation type here there are two types named
1.BPEL process Manager for Developer (371MB)
2.BPEL process manager for Oracle AS Middle tier (107MB)
i selected 2.BPEL process manager for Oracle AS Middle tier (107MB) and click next
pop up window opens with title dependencies
error:
BPEL Process manager for oracle AS Middle tier will run on top of a supported Oracle Application Server 10.1.3.1.0 J2EE server and Web Server Or J2EE server instance. this location does not contain this instance. Please select new Oracle home that contains a supported instance.
so i changed the destination path to : D:\product\10.1.3.1\OracleAS_1\BIN then also i got the same error.
please any one mention the path for J2EE and Web Server instance for installing the BPEL PM for Oracle AS Middle Tier.
Thanks in Advance
Aswath Thaniga

If you choose the developer version you will be fine.
If you have installed J2EE and Web Server installation into D:\product\10.1.3.1\OracleAS_1 then this is the location you install your BPEL PM into, not D:\product\10.1.3.1\OraBPEL_1 or D:\product\10.1.3.1\OracleAS_1\BIN.
D:\product\10.1.3.1\OracleAS_1 is what we call the ORACLE_HOME, generally we create a new home for each install, but in this case there is a dependency on 10.1.3.1 OC4J container. So it needs to be installed into 10.1.3.1 oracle home.
The bin directory is just the executables for that home, its not the actual. home.
cheers
James

How to configure Oracle Enterprise Manager for ASM RAC Database ?

Dears,,
We have two databases (Primary & Standby), each database has two instances
Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
How to configure Oracle Enterprise Manager for this environment ?
I need documentation for this please.
Many thanks & Regards,,

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

"Error while accessing porting layer for ORACLE database via getSessionId()

Hi,
My ejb3.0 Entity is created from Emp table in scott/tiger schema of an Oracle 10g database. I am guessing I made some mistake creating the datasource or uploading the driver, because when I run my application, I get a long exception stack trace. The bottom-most entry in the stack trace is:
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing porting layer for ORACLE database via getSessionId().
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:148)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.createPooledConnection(DirectConnectionFactory.java:527)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:158)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:118)
     at com.sap.sql.connect.factory.PooledConnectionFactory.createPooledConnection(PooledConnectionFactory.java:119)
     at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:38)
     at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:685)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPool(DBDataSourcePoolImpl.java:1081)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPooledConnection(DBDataSourcePoolImpl.java:919)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.getConnection(DBDataSourcePoolImpl.java:67)
     at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.getConnection(DatabaseDataSourceImpl.java:36)
     at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
     ... 90 more

Actually, now (after the GRANT described in my reply before) the Exception has changed to:
Caused by: com.sap.sql.log.OpenSQLException: Error while
accessing porting layer for ORACLE database via
<b>getDatabaseHost</b>().
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException
(Syslog.java:148)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createPooledConnection(DirectConnectionFactory.java:527)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:158)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:118)
     at com.sap.sql.connect.factory.PooledConnectionFactory.
createPooledConnection(PooledConnectionFactory.java:119)
     at com.sap.sql.connect.factory.DriverPooledConnectionFactory.
getPooledConnection(DriverPooledConnectionFactory.java:38)
     at com.sap.sql.connect.datasource.DBDataSourceImpl.
createPooledConnection(DBDataSourceImpl.java:685)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPool(DBDataSourcePoolImpl.java:1081)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPooledConnection(DBDataSourcePoolImpl.java:919)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
getConnection(DBDataSourcePoolImpl.java:67)
     at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.
getConnection(DatabaseDataSourceImpl.java:36)
     at com.sap.engine.services.dbpool.spi.
ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
     ... 90 more

Enterprise Manager for Oracle 8.1.5 Win NT 4.0

Anyone know where can I download the Enterprise Manager for Oracle 8.1.5 running Windows NT 4.0?
The one in the Oralce download is for 8.1.6?
Thanks
Eng Wah

Depends on how big is your database.
For small database, doing a export and import is quick and dirty.
For larger database, I would suggest migrate the database. But this means a lot of work and test. This is what I would do if I am doing amigration:
1. Do a cold backup of your 815 database
2. On your new test box, try to install 815 and start your old database
3. Upgrade your database to 8174
4. Install 10gr2 on your new test box
5. Migrate your 8174 database to 10gr2.
6 Test a lot
7. Repeat steps 1-6 2-3 times
8. Document tthe process and your test results completely.
9. Repeat what you document on your production box.

Database Connection Error 42000:[Microsoft][ODBC driver for oracle] Syntax

Hi,
This is Sathish, I am trying to create a report and retrieve data through stored procedure using ODBC Connection. When connecting to the Stored Procedure it is showing Database Connection Error 42000:[Microsoft][ODBC driver for oracle] Syntax error or access violation' Error.
CRXI R2, Oracle 9i.
What do i do to solve this issue.
Regards,
Sathish

Hi Satish
It could be an issue with the driver.
You can try with the OLEDB n Oracle native connection to test if the issue persists.
Also you can refer to the [Troubleshooting Database Connectivity for Crystal Reports|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d05b3bb7-0f28-2c10-4ea3-84dbdc4e414e&overridelayout=true]
Hope this helps!!
Regards
Sourashree

Link to download Oracle GoldenGate 11g for MySQL

Dear All,
I am in search of Oracle GoldenGate 11g for MySQL. Somehow could not find it download.oracle.com and edelivery.
If someone knows how to download it please guide me.
Thanks, Imran

You can download from here:
https://edelivery.oracle.com/EPD/Search/handle_go
I used GG on windows V32424-01 with mysql and it works fine
Cheers

ADF Faces: !-- ERROR: could not create stylesheet for oracle-desktop.xss

Hi,
I'm using ADF Faces EA6. Sometimes when I create the EAR, it doesn't include the file "oracle-desktop-ea6-ie-6-windows.css" which muest be present in the "adf/styles/cache" directory. If I check the source code from the browser, it starts like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"><html dir="ltr" lang="es-ES">
<head><title>Sistema de Seguridad</title><meta name="generator" content="Oracle ADF Faces"><script type="text/javascript" src="/fmv/adf/jsLibs/Commonea6.js"></script><script type="text/javascript">_defaultTZ()</script></head>
Please note the comment: 
Does somebody know the reason?
TIA,
Brian

If everything is set up properly the css will get generated if it doesn't exist. You do not have to be running in the IDE for the css to be correctly generated. Running the app first is generating the css before you deploy, so you've taken away the symptom but not solved the problem. If you try running on another browser, for example, you'll probably run into the same problem.
Does your ear get unzipped when you deploy? Do you have a writable file system for the css to get written to? There is a known issue with WebLogic where it doesn't expand the EAR.
Please check to see if there are errors in the logs.

Error in getting process status for oracle instance: instance12- component: coreapplication_obisch1

Hi,
while uploading new rpd getting error message in enterpriise manger
Error in getting process status for oracle instance: instance12- component: coreapplication_obisch1,chekced in the dignostic log found above mentioned error
what can be cause of the probelm
thanks

Hi,
1.Try using the sample rpd of it works, then the problem with the new rpd.
2. Restart the service once then upload the new rpd.
Regards,
VG

Oracle Enterprise Manager for Personal Oracle 9i

I have justdownloded Personal oracle 9i for WIN98.
Everything was fine. But when I tried to install the Enterprise Management 2.2 (for 8i) I got an errorthat "Oracle .swd.Jrl.1.1.8.10.0 support file is missing.
I was able to install the OEM for my Personal 8i
How do I download the OEM for Personal Oracle 9i. I do not have room to install Enterprise Oracle 9i

You can't use Enterprise Manager for 8i on
Personal Oracle 9i.
I have a question.
I have installed Personal Oracle 8i on my PC,
but i don't find Oracle Enterprise Manager for 8i download site on OTN. Can you healp me?

Send an email to all user in Oracle Test Manager for Web Applications

I have administrator access to Oracle Test Manager for Web Applications. How can I send email to all user in the system (Oracle Test Manager for Web Applications)?
Thanks
Katherine
Edited by: Katherine on 20/12/2010 16:38
Edited by: Katherine on 20/12/2010 16:39

Hi ,
You can create a single dynamic distribution group with the condition to have only the mailboxes in exchange as its members . Then when a person send an email to that Dynamic distribution group it will get distributed to all the mailboxes
in exchange.
Note : Most important feature in the dynamic group is that the membership of that group will be maintained automatically and also along with that we can have group membership by defining the recipient types/OU /rules.
I agree with ED and also based on my knowledge you cannot achieve your scenario without Distribution groups or dynamic distribution groups.
Thanks & Regards S.Nithyanandham

Oracle Enterprise Manager for Monitoring Siebel Servers/Component/Services

Hi,
I am looking for a document on Oracle Enterprise Manager for monitoring Siebel Servers/Component/Services so that it can notify us when something is down.
Kindly send the document on [email protected]
Thanks
Gaurav

Hi Gaurav,
You can refer to below otn docs for details
Enterprise Manager Getting Started with Application Management Pack for Siebel
http://docs.oracle.com/cd/E24628_01/em.121/e26046/toc.htm
Regards,
Rahul

Oracle Rules Manager vs Oracle Business Rules

Hi
Can someone explain the difference between Oracle Rules Manager and Oracle Business Rules.
Is Oracle Promoting both the products?
What I understand is that Oracle Rules Manager comes a part of the Oracle Database 10g R2 (and 11g) and Oracle Business Rules is a part of the SOA suite.
Is there any difference in the positioning of both these products?
Our client is evaluating various Rules engines in the market and we want to make sure that we choose the correct product.
Thanks, Srini

Igor S. wrote:
He solves the same problem with rules and without. My question was what would be better? Why would you chose one over the other. I prefer rules that is easy to state, easy to read, and easy to implement. Clear text rules in Prolog being a firm favourite. :-)
Using a rules engine, with a fairly complex API, in order to define rules? I would want very sound and very robust justification for that.
Taking this EMP table example. If there is a single AddEmp() PL/SQL procedure interface for adding employees, it is simple matter to see what it does, how it does that, and test and debug that. The only knowledge needed is the ability to read and understand the source code. The same cannot be said of rules engines.
As for the issue of updating AddEmp() with new rules. Edition redefinition takes care of versioning database objects. And in a far more controlled fashion than dealing with a rules engine that is dynamically update now! while the database is in use - and you have no real idea or real control over when exactly now! was.

GGS ERROR 150 Oracle GoldenGate Manager for Oracle, mgr.prm: Addre

Similar Messages

Maybe you are looking for