Ghost Audio from Other Clips

Hi All,
I'm having an issue when adding new selections to the project.
1) I add one selection from a clip and the audio is fine;
2) I add another selection from somewhere later in the same clip and I can hear ghost audio from the previous selection;
3) If the second selection in the project is shorter than the first, the ghost audio seems "wrapped" - that is the ghost audio plays from two different points in the previous selection at the same time.
The original clip is a .mov using the Apple Intermediate Codec and AAC audio.
Any advice would be great!
Thanks!
- Charles

Hello All,
I'm updating this in case anyone else has the same issue.
It turns out the AAC encoding was causing the issue. I used QuickTime Pro to save the file with a different audio encoding and all is well, now.
Thanks!
- Charles

Similar Messages

Avchd using audio from other clips

Hi
I just reloaded a project from a client to do some adjustments. all files are AVCHD put in 3 different folders. "Media/Footage/Card1/Private (Card2/Private)... you get it.
Suddenly my audio both in timeline and reference monitor switched source to other clips. I've tried to restart, I tried to use prelude to ingest using prores conversion. if I play it from quicktime everything works fine. this is only a problem with some clip not all. I didn't rename in the folder structure only in the project bins.
Does anybody know if this is a general problem for CC 2014. I never had this problem with CC version.
Let me know if anybody struggles with the same issues.
regards
Morten

Hi Morten,
When you had initially put the project together, did you Import the AVCHD clips with "File > Import" or Media Browser? The latter is preferred and alleviates a lot of discomfort later on. Can't guarantee this is the solution, but doesn't hurt.
Thanks
Jeff Pulera
Safe Harbor Computers

How can i leave audio from one clip playing, while showing another one in i

i am editing a movie, using iMovie 08, and want to use sound for a clip in the video for the end credits. how can i do this?
just to be clear, i am not trying to add audio. i am trying to leave the audio from ONE CLIP playing, while viewing a new frame. thanks.

This is simple in iMovie 11 (drag and drop), but in iMovie 08, you can still do it.
[See this blog post for details|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.htm l]

How do I use just the audio from a clip in imovie? No picture, no video, just audio!

I want to put the audio from a clip at the end of the video. No video, just black screen

It will require a bit of a workaround. But it can be done. If you enable Advanced Tools under the iMovie Preferences (Go to the iMovie Menu > Preferences). Enable Advanced Tools by clicking the checkbox.
Now create a title with a black background by dragging at title to the end of the video on the Project timeline. Once the title is there, delete all the text on the title. Now drag that black background directly dead center onto the video clip just before the end where you want to 'blot out' the video and just have audio. When you release the mouse, you will be shown a pop-up menu with a bunch of different options including one titled cut-away. Choose this option. What will happen is the video will cut to the black video background you dragged on top of the video clip. You can set the duration by dragging the left and right edges out further to make it run longer. This black back ground effectively cover the video and will continue to play the audio of the underlying video clip.

How do I use just the audio from a clip without the video?

Can't remember how to use just the audio from a clip, without the video. FCP X can't select like FCP&

Edit just the audio into the timline.
The disclosure triangle next to the edit buttons.

Detaching audio from video clips

Hi
After trying the standard 'detach audio' button I cant seem to find a way to completley detach audio from a clip in order to hear the track I have added to the clip. All I can seem to do is turn the volume right down, and inturn still able to hear it, which is proving annoying!
Any ideas would be appreciated!
Thanks

Thanks for your reply Geoff,
I basically have a soundtrack 3.28 minutes long which I want to be the only noise thats playing throughout my interchanging video clips, so I would like to completley move the audio from the all of the indivdual video clips that I am adding in, I thought the 'detatch audio' button would be the one for this, but as I continuously play back bits of the movie to prefect editing I can still slightly hear the sound from the individual videos that I am adding?
So frustrating, but Im sure thats its something real basic that I am missing.....

Extracting audio from many clips at a time

I have to extract some audio from many many video clips, so I was attempting to do it in one step, but Logic extract only from one clip at a time
So I'm thinking to use Audio Converter (it can extract audio from many clips in one step), but it ask me the AIFF encoding Bitrate (among 64 and 192 kbps). So I'm wondering... but Logic which AIFF bitrate manages???
Tnks

yes, it is possible. Infact, it is the normal practice to add those 10 roles to that single user in SU01 direclty.
and as I said, user comparison should be scheduled normally in SAP system landscape to do the things automatically, however not immediately but after some time.
http://help.sap.com/saphelp_nw04/helpdata/en/52/6714a9439b11d1896f0000e8322d00/content.htm
If you want user comparison immediately, then you need to do it manually in the role.

Audio from video clips

I tried combining video clips into one movie through imovie, the video was there but not the audio from the clips. What can I do to fix this?

The conversions played sound in QT, but no sound in the editor... What can I do so I don't lose the audio?
Open the Event file(s) with the QT Player and check the "Inspector" window to make sure the file, as imported to iMovie '08, still has its audio track in tact. If it does and the missing audio is limited to scrubbing Event files, check the audio switch under the preview window to see if it is off. If no audio is present in normal playback/preview mode, then thumbnails could be bad and you might try re-thumbnailing the events. If the problem is on the project side, try duplicating the project and see if the duplicate has sound. If you still don't have audio, try trimming the duplicate project to a very short sequence and exporting it to see if the output has audio. This assumes you have audio everywhere else and it is not a system wide problem like muting, system sample rate switched to a different setting, system volume turned down, etc...

Suggestions for blending audio from one clip to next?

I'm learning editing and PP and am practicing by editing different clips from a movie to make my own trailer. The problem I'm having is that going from one clip to another has obvious and abrupt changes. I could add audio transitions to each clip, though for a 2.5 minute trailer I'm not sure if fading audio up and down constantly is the best choice? What is the best way to blend the audio from one clip to the next?
Thanks.

You can create a crossfade (essentially an
audio dissolve) from one audio clip to another.
With the audio track(s) targeted, park the Playhead at the
audio cut and hit Ctrl+Shift+D (or drag from the effect panel):
You need to be sure you have sufficient 'handles'
on both clips to accommodate the crossfade.
Creating an audio crossfade
http://tv.adobe.com/watch/learn-premiere-pro-cs6/creating-an-audio-crossfade/

Extracting audio from video clip to use as narration?

Hi there,
I have a video clip in which I want to take the audio of actor speaking and put it onto another video.
I.e. he is speaking about walking in the park. I want to take him speaking about walking in the park and put it onto the clip where he is actually walking in the park.
How do I do this in premiere elements 10?

Hi Bill,
Thanks for the quick response. I guess my question now is how would I do those two things?
In terms of exporting the audio, where can I find that option when I'm on timeline?
What do you mean by "Alt-click" and what is a "muxed file"?
Thanks again,
Mallory
Date: Fri, 13 Jan 2012 19:01:51 -0700
From: [email protected]
To: [email protected]
Subject: Extracting audio from video clip to use as narration?
    Re: Extracting audio from video clip to use as narration?
    created by Bill Hunt in Premiere Elements - View the full discussion
Welcome to the forum. There are several ways to accomplish this, and your choice might well rest on how you like to work, and what you are doing, such as Deleteing Video. First, you could Export/Share just the Audio as a PCM/WAV @ 48KHz 16-bit, from your Timeline, and Import that into a New Project, where the Audio WAV file would be used. OTOH, you could Atl-click on the Video portion of the muxed file, and Delete the Video, leaving only the Audio portion. Good luck, Hunt
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4139273#4139273
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4139273#4139273. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do I put the audio from one clip over the video of another clip?

So I have two videos, and I want to replace the audio of the first with the audio of the second. Sorry, I'm new to 08 and have been trying to suss this out for ages so I'd really appreciate any advice you guys can give.

This thread seems to be on the same subject and is very helpful.
http://discussions.apple.com/thread.jspa?threadID=2072620&tstart=50
The Working with Audio clip also included the solution for extracting the audio from a clip at the very end of the video. Having to know the secret handshake of shift-command and dragging is really not intuitive, but such is progress....

No audio from video clips

I am only getting audio from the clips when I first start a sequence. When i drag it in the new iteam box in the project window in Premiere pro cc.

1st, More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
2nd, What are you editing?
Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

How do you overlay the audio from a clip over a iphoto slideshow clip ?

How do you overlay the audio from a clip over a iphoto slideshow clip ?
I want the audio from a video clip to be playing over the jpg/slideshow iphoto images ...so you see the slideshow elements but do not see the clip but do here the audio !
thanks ! HELP!

How do you overlay the audio from a clip over a iphoto slideshow clip ?
"Command-Shift-Drag" the Event clip containing the audio you wish to extract and "pin" it to the slideshow already in the Project window.

How do I overlay audio from interview clip over other video clips?

Help! I have some interview clips and want to over lay the audio from one of the interviews over different video clips. For example, I would show video and audio from the interviewee and then cut to a clip or scene showing what the guy is talking about but still have the interviewees audio playing as a voice over on the cut-away clip. How do I do that?!

Welcome to the forum.
Is this Audio muxed (combined into a Clip w/ both Audio & Video), or is it a separate Audio-only file, that has been Imported into your Project?
If the latter, just drag an Instance of it to a free Audio Track, and position, as is needed. Note: each Instance of a Clip can have different In & Out Poiints, so you are not limited to them being identical.
For the former, the muxed file, there are a couple of ways to do that, but possibily the easiest is to Alt-click on the Audio part of the Clip (temporarily unlinks the Audio & Video), and Ctrl-C (Copy), then move the CTI (Current Time Indicator/Playhead) to the end of the Timeline, and press Ctrl-V (Paste), for as many Instances of that Audio, as you need. Then, drag them to an empty Audio Track, while holding down the Ctrl key for an Insert Edit, rather than a Ripple Edit, so as to not affect anything on that Track, below the desired Video Clip. If you are replacing the Audio.
Another way to do that is to use an audio-editing program to rip the Audio, Save as a PCM/WAV @ 48KHz 16-bit file, and then Import that into the Project, for use in many Instances.
Good luck, and hope that helps,
Hunt

How do I extract audio from a clip?

I've tried to select a clip in the timeline then go to clip/audio optins but audio extract is always grey... I'm trying to pan audio into the next clip.

No need to extract it to apply fx or mix / pan it.
I f you want audio only from a clip ...you can drag clip to Source Monitor and then Drag Audio Only from there to Timeline / sequence

Ghost Audio from Other Clips

Similar Messages

Maybe you are looking for