Ghost Clip? RAM or Cache Problem?

Here it is. ghost.psd is the source file
Whta the hell is that? Where this clip come from? this is driving me crazy. always happens AE CS5(only CS5)
I didn't change anything. ghost.psd just appeared from somewhere. there is no clip there.
RAM problem? Cache Problem?
I already formated PC a few times. And re-install CS5 many times. all kind of updates applied.
please, help me.

Wow. Thanks anyway. I can't apply it right now. So I will do that when I come back home.
And let's you know the result.
Thank you one more~

Similar Messages

Ghost Clips

Sometimes when I place a video clip in the timeline, apply an effect (like strobe or speed change) to it and then delete it (because I've changed my mind) it still remains.
Even with a new and different video clip in the old ones spot, I will sometimes see a frame or two of the old one before it pops back to the current clip. It's almost like a "Ghost Clip." It's nowhere to be seen on the timeline but yet I'm seeing traces of it in my new clip.
Even with a SAVE>QUIT>RESTART I still get that ghost clip. Even if I make a new sequence and copy>paste my project to it, I'm still getting it. It appears to be embedded somewhere in the sequence as taking the original file from the bin and re-cutting it does nothing. Weird!
Has anyone else run into this?
Steve
I'm running FCP Studio on a Mac G5, 2.5 GIG RAM, Dual 2.7 processor,
Message was edited by: Steve Delasantos

Nice...
Got it working again by re-capturing that one clip into my bin from original tape.
Trashing renders didn't work, either. Thanks anyway.
Message was edited by: Steve Delasantos

Ghost clip appears in canvas only when other clips are placed in its place

Gd afternoon, this may sound crazy but here we go. the space on the timeline is blank, and when the sequence is played the blank section shows nothing but black screen. however when i drop any clip in the empty space on the timeline an old clip I changed the speed of shows over whatever clip i just dropped in the empty spot. Again, when the spot is empty nothing shows, only when a different clip is placed in that spot does the "ghost" clip appear over the new clip and the space that the ghost clip holds shows a blue rendered line for the speed that was changed.
How do I get rid of this ghost clip?

+thanks, i tried to delete the rendered clip but no help+
No, what is required when the problem reaches the stage you described is to delete ALL of the render files for that sequence. One way to do that is to go to Tools > Render Manager and navigate to the problem sequence and clicking in the Remove column for that sequence. Then click OK.
That will delete all of the render files for the sequence. Then you re-render. This sometimes works, as I said.

Taking old report even new report is uploaded on web - Cache problem?

Hello,
I have a problem. We are using remote server for development work.
We are working on web environment. The modules (forms & reports) will be uploaded to the unix server using web compilation links. Now I haveI uploaded (generate), a report (old) to the server. After some modifications new report is uploaded . When I run the report, it is always taking old one, instead of new.
Time stamp in the server is showing new one is uploaded.
I heard this could be because of cache problem on the server. If some one have faced the same , please let me know the solution for this?
Cheers
Ram Kanala

FRM-40738 (repid is coming out null)
Looks like here it is not able to find the report
repid := find_report_object('ETOX_9ITEST');
In Forms builder confirm that you have defined a report by this name for the particular form (adding the report in REPORTS_PATH would not suffice). I think it should also point to corresponding report.
Please post the exact error messages as you see it with the error numbers.
Other comments.
2) Added a TNS_ADMIN in the registry to point to TNSNAMES.ORA in the apps directory. This Tnsnames.ora has an entry for report server name. The report server is up when seen in OEM console. But my report does not launch. <<For 9i you do not need to do this . This alias defining is for 6i. In 9i it is "auto discovery" in the subnet.
You can remove this. (You need Tnsnames.ora for DB aliases, I am talking about reports server...)
3) Same comment as above
8)Verify the Reports 9i Service properties and check the "Log On as" information. Be sure to specify on "This account" the user information with which the installation was made.
For Windows/2000:
- Start-> Settings-> Control Panel-> Administrative Tools-> Services
- Double click on the Reports Server
- Go to "Log On" tab
- Change on the "Log On As" section to "This account" and enter the userid/password of the
user that installed Reports Server
- Ensure that the user account where the Reports Server is installed has administrator privileges
and a default printer.
- Restart the Reports Server as the new user.
(For WinNT steps will be similar)
---Workaround till your issue is solved is ....
Start report server as a standalone server
rwserver server=server_name
Thanks
Ratheesh

JAN 4, 2012 As of the Upgrade to   Lion,. and the Email portion, ..   DOES NOT allow a Video Clip to be sent via the Email as the I-Photo is not supported by Video Clips ( Previous Leopard No problem clip and drag via Quick Time Pro to the email

JAN 4, 2012
As of the Upgrade to   Lion,.   2007 I-Mac -   the Email portion, ..   DOES NOT    allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip ..      Now Lion only Export's   1 size, .   only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail    ???
Between the   Issue of   the   Lion, and Email issues ,   and the   Upgrade of   I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge ..    70,000 + photos in the Computer. .   and was   40,000 in the   I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB   or 32 GB   Unit . .
          No Help . ..   so far, .. as a Apple user   since   1996 ..    I have Never experieanced such frustration    ???
               ( any one have some help if similar experiances    ?     thank you     )

JAN 4, 2012
As of the Upgrade to   Lion,.   2007 I-Mac -   the Email portion, ..   DOES NOT    allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip ..      Now Lion only Export's   1 size, .   only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail    ???
Between the   Issue of   the   Lion, and Email issues ,   and the   Upgrade of   I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge ..    70,000 + photos in the Computer. .   and was   40,000 in the   I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB   or 32 GB   Unit . .
          No Help . ..   so far, .. as a Apple user   since   1996 ..    I have Never experieanced such frustration    ???
               ( any one have some help if similar experiances    ?     thank you     )

Caching problem w/ primary-foreign key mapping

I have seen this a couple of times now. It is not consistent enough to
create a simple reproducible test case, so I will have to describe it to you
with an example and hope you can track it down. It only occurs when caching
is enabled.
Here are the classes:
class C1 { int id; C2 c2; }
class C2 { int id; C1 c1; }
Each class uses application identity using static nested Id classes: C1.Id
and C2.Id. What is unusual is that the same value is used for both
instances:
int id = nextId();
C1 c1 = new C1(id);
C2 c2 = new C2(id);
c1.c2 = c2;
c2.c1 = c1;
This all works fine using optimistic transactions with caching disabled.
Although the integer values are the same, the oids are unique because each
class defines its own unique oid class.
Here is the schema and mapping (this works with caching disabled but fails
with caching enabled):
table t1: column id integer, column revision integer, primary key (id)
table t2: column id integer, column revision integer, primary key (id)
<jdo>
<package name="test">
<class name="C1" objectid-class="C1$Id">
<extension vendor-name="kodo" key="jdbc-class-map" value="base">
<extension vendor-name="kodo" key="table" value="t1"/>
</extension>
<extension vendor-name="kodo" key="jdbc-version-ind"
value="version-number">
<extension vendor-name="kodo" key="column" value="revision"/>
</extension>
<field name="id" primary-key="true">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="id"/>
</extension>
</field>
<field name="c2">
<extension vendor-name="kodo" key="jdbc-field-map" value="one-one">
<extension vendor-name="kodo" key="column.id" value="id"/>
</extension>
</field>
</class>
<class name="C2" objectid-class="C2$Id">
<extension vendor-name="kodo" key="jdbc-class-map" value="base">
<extension vendor-name="kodo" key="table" value="t2"/>
</extension>
<extension vendor-name="kodo" key="jdbc-version-ind"
value="version-number">
<extension vendor-name="kodo" key="column" value="revision"/>
</extension>
<field name="id" primary-key="true">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="id"/>
</extension>
</field>
<field name="c1">
<extension vendor-name="kodo" key="dependent" value="true"/>
<extension vendor-name="kodo" key="inverse-owner" value="c2"/>
<extension vendor-name="kodo" key="jdbc-field-map" value="one-one">
<extension vendor-name="kodo" key="table" value="t1"/>
<extension vendor-name="kodo" key="ref-column.id" value="id"/>
<extension vendor-name="kodo" key="column.id" value="id"/>
</extension>
</field>
</class>
</package>
</jdo>
Because the ids are known to be the same, the primary key values are also
used as foreign key values. Accessing C2.c1 is always non-null when caching
is disabled. With caching is enabled C2.c1 is usually non-null but sometimes
null. When it is null we get warnings about dangling references to deleted
instances with id values of 0 and other similar warnings.
The workaround is to add a redundant column with the same value. For some
reason this works around the caching problem (this is unnecessary with
caching disabled):
table t1: column id integer, column id2 integer, column revision integer,
primary key (id), unique index (id2)
table t2: column id integer, column revision integer, primary key (id)
<jdo>
<package name="test">
<class name="C1" objectid-class="C1$Id">
<extension vendor-name="kodo" key="jdbc-class-map" value="base">
<extension vendor-name="kodo" key="table" value="t1"/>
</extension>
<extension vendor-name="kodo" key="jdbc-version-ind"
value="version-number">
<extension vendor-name="kodo" key="column" value="revision"/>
</extension>
<field name="id" primary-key="true">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="id"/>
</extension>
</field>
<field name="c2">
<extension vendor-name="kodo" key="jdbc-field-map" value="one-one">
<extension vendor-name="kodo" key="column.id" value="id2"/>
</extension>
</field>
</class>
<class name="C2" objectid-class="C2$Id">
<extension vendor-name="kodo" key="jdbc-class-map" value="base">
<extension vendor-name="kodo" key="table" value="t2"/>
</extension>
<extension vendor-name="kodo" key="jdbc-version-ind"
value="version-number">
<extension vendor-name="kodo" key="column" value="revision"/>
</extension>
<field name="id" primary-key="true">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="id"/>
</extension>
</field>
<field name="c1">
<extension vendor-name="kodo" key="dependent" value="true"/>
<extension vendor-name="kodo" key="inverse-owner" value="c2"/>
<extension vendor-name="kodo" key="jdbc-field-map" value="one-one">
<extension vendor-name="kodo" key="table" value="t1"/>
<extension vendor-name="kodo" key="ref-column.id" value="id2"/>
<extension vendor-name="kodo" key="column.id" value="id"/>
</extension>
</field>
</class>
</package>
</jdo>
Needless to say, the extra column adds a lot of overhead, including the
addition of a second unique index, for no value other than working around
the caching defect.

Tom-
The first thing that I think of whenever I see a problem like this is
that the equals() and hashCode() methods of your application identity
classes are not correct. Can you check them to ensure that they are
written in accordance to the guidelines at:
http://docs.solarmetric.com/manual.html#jdo_overview_pc_identity_application
If that doesn't help address the problem, can you post the code for your
application identity classes so we can double-check, and we will try to
determine what might be causing the problem.
In article <[email protected]>, Tom Landon wrote:
I have seen this a couple of times now. It is not consistent enough to
create a simple reproducible test case, so I will have to describe it to you
with an example and hope you can track it down. It only occurs when caching
is enabled.
Here are the classes:
class C1 { int id; C2 c2; }
class C2 { int id; C1 c1; }
Each class uses application identity using static nested Id classes: C1.Id
and C2.Id. What is unusual is that the same value is used for both
instances:
int id = nextId();
C1 c1 = new C1(id);
C2 c2 = new C2(id);
c1.c2 = c2;
c2.c1 = c1;
This all works fine using optimistic transactions with caching disabled.
Although the integer values are the same, the oids are unique because each
class defines its own unique oid class.
Here is the schema and mapping (this works with caching disabled but fails
with caching enabled):
table t1: column id integer, column revision integer, primary key (id)
table t2: column id integer, column revision integer, primary key (id)
<jdo>
<package name="test">
<class name="C1" objectid-class="C1$Id">
<extension vendor-name="kodo" key="jdbc-class-map" value="base">
<extension vendor-name="kodo" key="table" value="t1"/>
</extension>
<extension vendor-name="kodo" key="jdbc-version-ind"
value="version-number">
<extension vendor-name="kodo" key="column" value="revision"/>
</extension>
<field name="id" primary-key="true">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="id"/>
</extension>
</field>
<field name="c2">
<extension vendor-name="kodo" key="jdbc-field-map" value="one-one">
<extension vendor-name="kodo" key="column.id" value="id"/>
</extension>
</field>
</class>
<class name="C2" objectid-class="C2$Id">
<extension vendor-name="kodo" key="jdbc-class-map" value="base">
<extension vendor-name="kodo" key="table" value="t2"/>
</extension>
<extension vendor-name="kodo" key="jdbc-version-ind"
value="version-number">
<extension vendor-name="kodo" key="column" value="revision"/>
</extension>
<field name="id" primary-key="true">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="id"/>
</extension>
</field>
<field name="c1">
<extension vendor-name="kodo" key="dependent" value="true"/>
<extension vendor-name="kodo" key="inverse-owner" value="c2"/>
<extension vendor-name="kodo" key="jdbc-field-map" value="one-one">
<extension vendor-name="kodo" key="table" value="t1"/>
<extension vendor-name="kodo" key="ref-column.id" value="id"/>
<extension vendor-name="kodo" key="column.id" value="id"/>
</extension>
</field>
</class>
</package>
</jdo>
Because the ids are known to be the same, the primary key values are also
used as foreign key values. Accessing C2.c1 is always non-null when caching
is disabled. With caching is enabled C2.c1 is usually non-null but sometimes
null. When it is null we get warnings about dangling references to deleted
instances with id values of 0 and other similar warnings.
The workaround is to add a redundant column with the same value. For some
reason this works around the caching problem (this is unnecessary with
caching disabled):
table t1: column id integer, column id2 integer, column revision integer,
primary key (id), unique index (id2)
table t2: column id integer, column revision integer, primary key (id)
<jdo>
<package name="test">
<class name="C1" objectid-class="C1$Id">
<extension vendor-name="kodo" key="jdbc-class-map" value="base">
<extension vendor-name="kodo" key="table" value="t1"/>
</extension>
<extension vendor-name="kodo" key="jdbc-version-ind"
value="version-number">
<extension vendor-name="kodo" key="column" value="revision"/>
</extension>
<field name="id" primary-key="true">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="id"/>
</extension>
</field>
<field name="c2">
<extension vendor-name="kodo" key="jdbc-field-map" value="one-one">
<extension vendor-name="kodo" key="column.id" value="id2"/>
</extension>
</field>
</class>
<class name="C2" objectid-class="C2$Id">
<extension vendor-name="kodo" key="jdbc-class-map" value="base">
<extension vendor-name="kodo" key="table" value="t2"/>
</extension>
<extension vendor-name="kodo" key="jdbc-version-ind"
value="version-number">
<extension vendor-name="kodo" key="column" value="revision"/>
</extension>
<field name="id" primary-key="true">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="id"/>
</extension>
</field>
<field name="c1">
<extension vendor-name="kodo" key="dependent" value="true"/>
<extension vendor-name="kodo" key="inverse-owner" value="c2"/>
<extension vendor-name="kodo" key="jdbc-field-map" value="one-one">
<extension vendor-name="kodo" key="table" value="t1"/>
<extension vendor-name="kodo" key="ref-column.id" value="id2"/>
<extension vendor-name="kodo" key="column.id" value="id"/>
</extension>
</field>
</class>
</package>
</jdo>
Needless to say, the extra column adds a lot of overhead, including the
addition of a second unique index, for no value other than working around
the caching defect.
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com

I am facing a caching problem in the Web-Application that I've developed us

Dear Friends,
I am facing a caching problem in the Web-Application that I've developed using Java/JSP/Servlet.
Problem Description: In this application when a hyperlink is clicked it is supposed to go the Handling Servlet and then servlet will fetch the data (using DAO layer) and will store in the session. After this the servlet will forward the request to the view JSP to present the data. The JSP access the object stored in the session and displays the data.
However, when the link is clicked second time then the request is not received by our servlet and the cached(prev data) page is shown. If we refresh the page then request come to the servlet and we get correct data. But as you will also agree that we don't want the users to refresh the page again and again to get the updated data.
We've included these lines in JSPs also but it does no good:
<%
response.setHeader("Expires", "0");
response.setHeader("Cache-Control" ,"no-cache, must-revalidate");
response.setHeader("Pragma", "no-cache");
response.setHeader("Cache-Control","no-store");
%>
Request you to please give a solution for the same.
Thanks & Regards,
Mohan

However, when the link is clicked second time then the request is not received by our servlet Impossible mate.. can you show your code. You sure there are no javascript errors ?
Why dont you just remove your object from the session after displaying the data from it and see if your page "automatically" hits the servlet when the link is clicked.
cheers..
S

Bridge update does not fix caching problems.

Dear Adobe,
The 5.0.1.23 update for Bridge CS6 does NOT fix the problem of constantly re-caching layered TIF files.
I originaly reported the problem here on May 16, 2012.
http://forums.adobe.com/thread/1007560
At that time I also submitted a bug report via photoshop.com, and received an e-mail response from Adobe support confirming the problem had been replicated in their lab and promising a fix in the next update.
I've since tracked several other reports of this bug and related cache problems.
I assume that, at best, we will have to wait another 6 months or more for the next update. How can I assure this bug will be addressed?

redcrown on guard wrote:
The 5.0.1.23 update for Bridge CS6 does NOT fix the problem of constantly re-caching layered TIF files.
At that time I also submitted a bug report via photoshop.com, and received an e-mail response from Adobe support confirming the problem had been replicated in their lab and promising a fix in the next update.
Thank you for this bit of information. Maybe it means I can stop the deactivations/uninstall/reinstall/reactivate cycle to try yet another solution. And hopefully, this will stop the re-caching problem with other than tif files.
regards
*S*

Caching problem in Chrome and Firefox

Hey folks,
I ran into a weird problem. I created a video player based on the Strobe Media Playback. I added a couple of plugins. This player is used to watch progressive download FLV files.
I ran into the following issue. I watch part of a video. I select another one. Then I select the previous one again. Only the cached portion of the first video is shown. The entire video will not be downloaded again from the server, but only the portion already cached on the client.
This problem is really bad in Chrome. When I restart FF, I can watch the entire video. Not in Chrome. The only way to solve this in Chrome is to clear the cache.
Any ideas?
The website is live, so you can test this yourselve. http://www.submergeproductions.com/videos.aspx
All help very welcome, because this is a major issue.
Follow up. I made a quick fix. I added a random number to the FLV url to force a redownload from the server, but this quite a dirty fix. I would rather have a restart/continuation of the download if the file was only partially downloaded.
Thanks,
Peter

Hi Silviu,
the reason why it works now is because I uploaded a modified version. I append "?<random number> to the URL. That prevents caching problems because the browser hasn't got the version cached. But I still report it as a bug.
Peter

Caching problem of servlet

Hi guys
We are facing this problem of caching within our project. The project aims to generate a html code to pick up some rich media ads details at random and displaying on the html file where the generated code is expected to be pasted. We developed two servlets, one which extracts the ads from the database randomly and then depanding on the ad type it calls the other servlet as src of an iframe, which in turn puts all code for displaying the rich media ads. The script which we are generating for the user to paste onto their pages is:
<script LANGUAGE="JAVASCRIPT" src="http://192.168.1.6:8080/advert_java/servlet/GetAdServlet?region=1&zone=1&type=nossi&cachevar=yes">
</script>First servlet (GetAdServlet) returns the javascript statements and thus is called using this generated code. Now cotents of the iframe are supplied by the second servlet ie richMediaServlet. This servlet is called like
iframeURL = fullHttpDir+"/servlet/RichMediaServlet?";
iframeURL += "bannerCode="+ RNBanner (BannerCode to be called);
out.println("document.write(\"<iframe src='" + iframeURL + "' height=" + hheight +" width="+ wwidth + " SCROLLING=no FRAMEBORDER=0 MARGINWIDTH=2 MARGINHEIGHT=2 onfocus='window.focus(); return iframeFocus()'>\");");
out.println("document.write(\"</iframe>\");");This richmediaServlet returns HTML into <iframe>. when richmediaservlet is called, a parameter 'bannerCode' is passed. then richmediaServlet fatches the banner from the database and displays the banner into the <iframe>.
Now the problem comes when we run the html file containing the script tag mentioned above, and refresh our page, ideally it should pick the ads randomly and pass it on to RichMediaServlet.
I also try debugging both servlets. I called the getadservlet from javascript mentioned above and put debugging info in both the servlets, now for every refresh we do on the html side, we are getting a different random bannercode in adservlet but in richmedia when we print the bannercode received in querystring it is taking an older value which was displayed some time back and keeps on doing this for quiet a long time, making it look like some caching problem of RichMediaServlet.
Instead when we tried to put the same html <script> code into another servlet's doGet, everything seems to be working fine.
i have also used the following code to prevent the caching on both the setvlets
long currentTime = System.currentTimeMillis();
response.setHeader("Cache-Control", "no-cache, must-revalidate");
response.setHeader("Pragma", "no-cache");
response.setDateHeader("Last-modified", currentTime);
response.setHeader("Expires", "Sat, 6 May 1995 12:00:00 GMT"); and following in the iframe's head tag before the iframe tag in the getAdServlet.
out.println("document.write('<head>');");
out.println("document.write('<meta http-equiv=\"Cache-Control\" content=\"no-cache,must-revalidate\">');");
out.println("document.write('<meta http-equiv=\"Pragma\" content=\"no-cache\">');");
out.println("document.write('<meta http-equiv=\"Last-modified\" content=\""+ currentTime + "\">');");
out.println("document.write('<meta http-equiv=\"expires\" content=\"Sat, 6 May 1995 12:00:00 GMT\">');");
out.println("document.write('</head>');");I request you all geeks to try and help me to your best. The project is at its final stages and in high urgency now.

i think the caching is being in the browser, with the iframe.
You should try passing a random param to the servlet in the iframe URL, something like:
var a = Math.random() * 10000000; //for example
out.println("document.write(\"<iframe src='" + iframeURL +"&rand="+a+"' height=" + hheight +" width="+ wwidth + " SCROLLING=no FRAMEBORDER=0 MARGINWIDTH=2 MARGINHEIGHT=2 onfocus='window.focus(); return iframeFocus()'>\");");
out.println("document.write(\"</iframe>\");");
...It should force the browser to ask for the servlet again
hope this helps...

Caching problem with Internet Explorer

Hi,
users of an ApEx application I'm working on are reporting that when they're deleting an uploaded file from one of the pages in the application (using Internet Explorer), the link to the file remains. This is however not an issue in FireFox, and after some research I found out that this is a caching problem in IE. It can be avoided by making IE check for newer versions of stored pages every time a page is visited, but it is clearly not an option to ask all our users to do this. I also learned that it can be fixed by randomizing the file URL every time the page is loaded, but I don't know how to randomize a URL, nor how to make it still point to the uploaded file.. Any help would be appreciated!
Thanks,
-Kjetil

Kjetil,
This problem is also there if you use Flash Charts with a drilldown. See this posting:
http://www.deneskubicek.blogspot.com/
It will also link you to a corresponding thread and to an example in my demo application.
The idea with a random number changing you link is the same I used in extending my
xml chart package.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

ADF cache problem

Hello,
I'm developing a web application with an ADF tree accessing to a Content DB repository. When I deploy the application and navigate to the tree everything look fine. The problem occurs, when the content of the repository changed outside of the web application (e.g. a file will be deleted with Oracle drive), the tree doesn't display the changes. The only way to get the right state of the tree, clear the browser cache and reload the page again. In my opinion it looks like a caching problem. Putting the following meta information in the html header also failed!
<meta http-equiv="pragma" content="no-cache"/>
<meta http-equiv="expires" content="0"/>
<meta http-equiv="cache-control" content="no-cache"/>
Is there a possibility to disable the caching of such ADF components?
Hope you can help me!
Thanks,
Alex

This will probably help you: http://www.oracle.com/technology/products/ias/web_cache/afc/index.html
Regards,
Koen Verhulst

Cache problem for this

Hi
in the saw.sessionsinfo.xml file ,i change the home link prop true to false
but it not remove from the presentation side
below is my file
Below is my script file
plz check it
give if any errors
<?xml version="1.0" encoding="UTF-8"?>
<resourceBundle xmlns="oracle.bi.ps.resourceBundle/v1">
<gdexpression id="noLogoffUI" expr="session.hideLogoffLink" />
<gdexpression id="syndicate" expr="session.syndicate" />
<gdexpression id="canAccessDashboards" expr="privileges.Access['Global Portal']" />
<gdexpression id="hdrLinkCatalog" expr="true" />
<gdexpression id="hdrLinkOpen" expr="true" />
<gdexpression id="hdrLinkAdvanced" expr="true" />
<gdexpression id="hdrLinkHelp" expr="true" />
<gdexpression id="hdrLinkHome" expr="false" />
<gdexpression id="hdrLinkGSearch" expr="true" />
<gdexpression id="hdrLinkNew" expr="true" />
<gdexpression id="hdrLinkDashboards" expr="true" />
<gdexpression id="hdrLinkSettings" expr="true" />
<gdexpression id="bipKeepAlive" expr="session.bipKeepAlive" />
<gdexpression id="bipWebUrl" expr="system.config['AdvancedReporting/WebURL']" />
<gdexpression id="bipExternalRepository" expr="system.config['AdvancedReporting/ExternalRepository']" />
<gdexpression id="biComposerContext" expr="system.config['BIComposer/ContextPath']" />
</resourceBundle>
plz anybody give solution for this
Edited by: ARYABRAHMA on Feb 5, 2013 3:38 AM

is cache problem for this

Qaaws not refreshing query triggered from Xcelsius, maybe a cache problem

Hi,
I'm having a problem with QAAWS and Xcelsius
I'm using a List Builder component to select multiple values in this case STATES from the efashion universe
I use the selected states as values to feed a prompt in a QAAWS query, the qwaas query has the SALES REVENUE as the resultset and in the conditions it has a multi prompt for STATES
When I preview my dashboard, I select the States, then UPDATE the values and then refresh the query with a CONNECTION REFRESH button, The first time I do this it works fine and returns the Sales revenue.
If I add a new State to my selection and then run update and run run again the query with the refresh button, it doesn't work any more and it shows again the value retrieved from the first query
First I thought that the query wasn't triggered by Xcelsius, but by doing some more tests I found that actually the query runs but it returns the value from the first query
I think this is a cache problem , so is there a way to tell QAAWS to always run the query and not use the cache?
thanks,
Alejandro

Hello Alejandro,
QaaWS indeed uses a cache mechanism to speed up some Xcelsius interactions (from XI 3.0 onwards), but your issue should not be induced by this, as cache sessions are discriminated according to session user id & prompt values, so if you are correctly passing prompt values, QaaWS should not serve you with the previous values by error.
Could you specify how you are passing several prompt values to the QaaWS? There might be an issue there, so make sure that:
1. QaaWS query prompt is set using In List operator, otherwise only first value will actually be taken into account,
2. In Xcelsius Designer Data Manager, web service input paremeters are duplicated to accept several input values (you cannot submit you list of prompt values as a list to a single input parameter).
If this still does not work, I'd suggest you debug your dashboard runtime using an HTTP sniffer like Fiddler (available from http://www.fiddler2.com/) which enable you to inspect the sent & recieved HTTP messages with the server, where you should verify which prompt values are sent to the QaaWS servlet.
FYI, you can set the QaaWS cache lifetime for each query, by going into QaaWS edition first wizard screen, click Advanced... button and change value for timeout parameter (default is 60 seconds)
Hope that helps,
David.

ASO cache problem with Windows 7

I have a large base of AS2 classes that support my application. I've been working on it for a few years and I'm very familiar with the ASO cache problem that causes edits to not be compiled. Well, I hit it today and I can't get rid of the old files. I'm running CS5.5 and I used the menu first. Then I manually deleted the ASO files. Then I rebooted the computer and searched the entire C: drive for ASO files and deleted all of them. Nothing worked. I finally renamed one of my class files (and the the necessary edits that flowed therefrom) and that one file was recompiled. Obviously there is a hidden cached file somewhere. I have Win7 Pro 64-bit. Has anyone had a similar problem? The last thing I want to have to do is rename all of my class files or tear down and rebuild my development box. TIA

3.1 is not "fine" and the drivers leave much to be desired.
You will probably need to do a Safe Mode and uninstall, rollback, system restore. Use your DVD for Windows 7.
Not sure of the support issues and details on MacBook Pro 13" as to whether you have graphic driver issue, AppleHFS, or other (and to say 'total hangup' doesn't really lead to what and why).

Ghost Clip? RAM or Cache Problem?

Similar Messages

Maybe you are looking for