Ghost GS60 2PL

Hello everyone,
Since I'm in Denmark, I use a laptop MSI ghost GS60 2PL (pc for the gaming) and I have incredible lag spike : It goes from +/- 30 ms to 1000ms for 10-15 sec and then latency goes down as if nothing had happened. I've read some discussion about this problem and I have already tried the various operations proposed by others but nothing actually worked, lags are less present but they still there.
Is it someone would have found a fix that would allow me to play cs correctly and no longer have a lag every x minutes?
The most funny thing is that when this bug happens, I have all the bodies of enemies that fall next to me with a big sound bug.
If someone have a quick fix, can he share me, I would be very grateful!
Sincerely,

Are you using a wired or wireless connection?
What is your router/access point manufacturer and model #?
What game(s) were you playing? Does it happen to all of them? or just some?
A little more information about your setup will go a long way to helping us diagnose your problem. But not providing enough information will mean we can't help you efficiently.
Please provide as much information as you can about everything.

Similar Messages

  • Svet's Fermi/Kepler VBIOS/EC Tuner - [ver: 3.00u]

    VBIOS Flashing and Safety Procedures:
    Always make a VBIOS backup, before start messing with your VBIOS!!
    You can do this with GPU-Z: http://www.techpowerup.com/downloads/SysInfo/GPU-Z/
    or with Nvidia Flash Tool[under windows]: http://www.techpowerup.com/downloads/2258/nvflash-5-142-for-windows/
    command line to take a VBIOS backup:
    nvflash.exe -b org.rom [ENTER]
    command line to flash your modified VBIOS from cmd:
    nvflash.exe -4 -5 -6 mod.rom [ENTER]
    Where:
     org.rom is the name of your original VBIOS
     mod.rom is the name of your modified VBIOS, you can replace it if needs with your name,
     but file extension must end to .rom [etc: another example: mybios.rom or similar]
    Before start flashing your VBIOS:
     * Close all applications that are currently running and can be closed!
     * Close especially any Antivirus Scanners and any other resident scanners!
    Those steps are need to prevent and avoid VBIOS update interruption.
    DO NOT TURN OFF OR REBOOT MACHINE DURING THE FLASH PROCESS!!!!!
    A bad flash will probably turn your VGA into an unusable state.
    When something goes wrong during the VBIOS update like:
    Lost electric power, PC crash or reboot
    That will stop your machine from booting!
    IF this happened you have to perform a VBIOS recovery.
    Miscellaneous:
    Q.: How do i turn off the robot voice mentor? [as i don't want such]
    A.: You can mute the Tuner once is running from your mixer. The changes will be remembered for next Tool's usage.
    F.A.Q:
    Q.: I can't start the Tool, i've received followed error on start attempt. How i can fix it?
    A.: As mention in the error message itself, you need to log-in in your Windows with account who has administrative rights.
    Once done, the error will no longer occur.
    Q.: How can i check my VBIOS properties before change them?
    Q.: I've maded the desired changes and customised my VBIOS with the Tuner,
    but how can i verify that's done properly?
    Q.: How i can check that my VBIOS is healthy before modification?
    Q.: How i can check that my VBIOS is healthy after modification?
    A.: You can click on "VBIOS-Z Report" to check and verify current VBIOS parameters.
    It will shows current states based on your current modifications [or if you haven't modified anything yet, will shows VBIOS original parameters],
    along with healthy status.[OK/Not OK]
    Examples:
    Loading original VBIOS file:
    and executing scan report 1st:
    VBIOS-Z Report engaged:
    closing the report and proceed with VBIOS modification, for example let's modify GPU core freq.,
    by clicking on Core Tune.
    Core Tune engaged:
    [Let's say we want to set 900MHz core speed.]
    All is done very simple, very quick and very easy. Everything is done automatically.
    All you need is to enter desired new core speed, the Tuner will do the rest with all necessary changes.
    Closing this thread and executing VBIOS-Z Report again after our modifications:
    And we check that our desired new core speed is now applied,
    and that all others related parameters changed respective.
    We also see that the BIOS is healthy as expected and now we can save and flash our modified VBIOS.
    [If you want to modify more stuffs, just go to main screen and adjust others desired parameters, when its done you can save your VBIOS]
    Example if something is wrong with VBIOS image, [i've damaged the vbios image with sense then scan it with the tuner]
    scan engine will report it and you can read it along will turn to red background:
    If you receive such red background color[you also can read the VBIOS is corrupted] by any chance,
    you shall not flash your VBIOS with this image.
    Q.:  I just want to check VBIOS-Z report, without to do any modification over the VBIOS image. Is this possible?
    A.: Yes, when you click on "Save & Exit" button you will be asked if you want to save VBIOS changes to your image or not.
    If you answer will "No", original scanned VBIOS image with regardless modified or not will be keep intact as is.
    [Etc: Even with changes done over it, they will be ignored and they will be not written to the VBIOS image]:
    If you want to save your changes, then you should answer with "Yes", then will receive an final message:
    Q.: I've modified my VBIOS Image, but i noted that after the modification my VBIOS Image size is now changed.
    Is this a normal?
    Should i concern about anything?
    I've re-scanned my modified VBIOS image with changed size with Tuner's "VBIOS-Z Report" and its still shows a green light.
    Can i proceed and flash it?
    Why this happened and why the size its changed after the modification?
    A.: Yes, its a normal and there is nothing to worry about. As long its shows green light its OK to proceed with VBIOS flash.
    This VBIOS size change can occur in some cases[not all] when VBIOS image is saved by GPU-Z.
    Tuner will auto detect if there is a padding issue while scanning the VBIOS image and will auto correct it,
    and will save modified VBIOS image with new geometry based on his original expected size.
    Q.: Is it necessary to run VBIOS-Z report either when i load my BIOS or after i made a modification over it?
    A.: Nope, its optional, but its recommended to execute the report to check your VBIOS parameters after the modifications[before 'Save & Exit'] and also to ensure that your VBIOS is healthy.
    Q.: When i start some of Tuner's threads the main interface is halted. Is this a normal?
    A.: Yes, its a normal. Its require to prevent parallel workers to run at the same time.
    Etc: when some of the workers is engaged, all others cannot be started until the worker which is currently in progress is finished.
    Q.: I've started a thread to make an VBIOS modification, but i clicked the wrong thread.
    Can i exit from this thread without made any modifications?
    A.: Yes, you can. When user input is requested, answer with "Q" or "q" and press ENTER.
    This will abort current operation.
    Example:
    Q.: How can i check the parameter before i change it without executing VBIOS-Z report?
    A.: Just go directly to what you want to modify, the co-respond thread will detect and show you current detected value before asking to enter your newest desired value(s)
    Q.: Is there any shortcuts that can be used from the main interface?
    A.: Yes, they are as follows:
    "R" ==> VBIOS-Z Report
    "C" ==> Core Tune
    "M" ==> Memory Tune
    "F" ==> FAN Tune
    "V" ==> Voltage Tune
    "A" ==> Max Voltage Limit
    "P" ==> Power Control
    "X" ==> Save & Exit
    Q.: Seems i hit my GPU core OC limit for my mobile video card. Can you do something more?
    A.: You can try Alternative asynchronized GPU clock booster instead, when you hit the wall/limit of GPU core OC.
    This can help you to fine tune your GPU freq. and to drain the maximum potential from it.
    [Pickup Mode 2 when asked, when you execute GPU core adjust for your mobile GPU]
    More details about newest feature added:
    The newest alternative GPU clock booster is only available for Mobility Series.
    It can help you to fine tune your GPU clocks and to reach the maximum OC potencial of your GPU.
    The newest mode is known as Mode 2 [Asynchronized], and will appear when you go for GPU core adjust.[only when you adjust Mobility VBIOS]
    For example when you reach say 800MHz for GPU core, [with normal Synchronized mode 1]
    and say further 810MHz is unstable, at this point you can try to boost it to 810MHz but by using Mode 2 instead.
    Then to retest. If become stable you can continue above by using Mode 2.
    Which one will be fastern Mode 1 or Mode 2 GPU core adjust?
    If we are talking about the same GPU frequency, Mode 1 should perform fastern.
    In Mode 2 GPU boost, its possible to reach higher GPU core frequency compared to mode 1.
    Best use Combined mode. I.e.:
    From Original BIOS:
    Start GPU core adjust with Mode 1 [Synchronized],
    until you reach unstable state.
    Mode 1 booster automatic adjust GPU core along with LTC and XBAR frequency,
    by using the same ratio as is original VBIOS and to keep it synchronized GPU core frequency.
    By using this mode should bring you best peformance.
    Let's say we hit the wall with Mode 1 booster [vbios: mod1.rom]
    Then we continue modify from our progress from vbios: mod1.rom,
    but using Mode 2 booster instead and to apply the new higher GPU core frequency.
    And to retest.
    Mode 2 booster is adjusting GPU core frequency only, keep it asynchronized with LTC and XBAR frequency.
    So if LTC and XBAR frequency is holding back the main GPU core frequency,
    this mode will help you to drain the maximum from GPU core.
    Resulting in mod2.rom [comes from mod1.rom]
    By combining Mode 1 booster, [until hit the wall] then continie with Mode 2 booster,
    we can opimize our GPU at maximum potencial of  GPC, LTC and XBAR frequency.
    Q.: When i turn on or reboot my computer, my Kepler based graphic card become annoying noisily like Jet Fighter takeoff.
    Is there any way to make it quiet or/and to control it by desired way?
    A.:Yes, run FAN adjust thread, then choose Mode3 [Configure boot Fan Duty PWM] and set your FANs to desired levels when they works outside Windows.[not controlled by VGA driver]
    This adjustment also will affect cards equipped with Dust Removal Technology.
    So keep in mind that setting the FANs Duty to too low value may cause Dust Removal Technology to has not much effect,
    due not enough turbulence to perform dust cleanup when FANs perform reversal spin.
    Sample usage:
    Let's say that we want to apply the followed values for our 570GTX card:
    [check VBIOS-Z report before modification]
    1st: We want to set Load voltage to 1062mV
    2nd: We want to adjust FAN speed as followed: min: from 40 to 24, max: from 80 to 100
    3th: We want to extent the max voltage limit Load voltage from 1.1V to 1.175V
    4th: We want to adjust and apply memory clock from 1050MHz[real] (4200 effective) to 1070MHz[real] (4280 effective)
    5th: We want to set core clock from 786MHz to 809MHz
    [check VBIOS-Z report after modification, to ensure that desired paraters are now applied and we can see how it will effect all other parameters along with calculated new performance settings based on our newest VBIOS modification and also verify and ensure that VBIOS integirity is OK before save and flash our custom and modified VBIOS]
    Here we go:
    Tuner's Features:
    *  Full automatic, very quick and easy to use
    *  Support 3D[underload] core clock adjusting
    *  Support 3D[underload] core voltage adjustment
    *  Support 3D[underload] core max voltage adjustment
    *  Support FAN adjustment
    *  Support 3D[underload] memory clock adjusting
    *  Special support for Mobility Series, allow P0,P1,P8 states modifications
    *  Can detect, calculate, supply information about:
        - current checksum
        - calculated checksum
        - automatic correct checksum per each thread
        - detect VBIOS images
        - detect VBIOS structure
        - self correct VBIOS image if needs
        - can repair damaged VBIOSes checksums [etc: load vbios image with bad checksum, Tuner can auto fix it]
        - detect and supply info about Image  Build Date
        - detect and supply info about Version ID
        - detect and supply info about Modification Date
        - detect and supply info about image geometry
        - detect and supply info about active P0 State
        - detect and supply info about FAN min/max values
        - detect and supply info about 3D underload voltage [2 modes: vary in range, or enforced one]
        - detect and supply info about max 3D underload voltage
        - detect and supply info about GPU chip and video card itself
        - detect and supply info about Image  File Version[Only on MSI graphic cards{when detected, detection is automatically}]
        - detect and supply info about SS Dynamic Ratio
        - detect and supply info about L2 Cache Clk Crossbar Sync
        - detect and supply info about Core clock
        - detect and supply info about Processor Cluster clock
        - detect and supply info about LTC2 Frequency
        - detect and supply info about XBAR2 Frequency
        - detect and supply info about Real Memory Clock
        - detect and supply info about DDR5 Memory Clock
        - calculate and supply info about VBIOS Memory Bandwidth
        - calculate and supply info about VBIOS Texture Fillrate
        - calculate and supply info about VBIOS Pixel Fillrate
        - calculate and supply info about VBIOS FLOPS
        - calculate and supply info about VBIOS Fermi L2 Cache Bandwidth
        - supply info about Fermi L2 Cache Size
    * can proceed MSI's Power Editions
    * support special DCII VBIOS images with EPU extension [both with and without padding]
    * VBIOS-Z Style:
      {We can check and see the performance of the video card based on VBIOS scan,
     without having the card front of us and also we can modify desired parameters and to see how they will affect the performance without flashing the card or when don't have the card which belong this VBIOS}
    * Auto determine, calculate and adjust LTC2 Freq., XBAR2 Freq. and Processor Cluster Freq. based on our newest desired GPU core clock speed.
    Current Supported VGAs VBIOSes:
    Nvidia Graphics cards from Fermi Series:
    590GTX
    580GTX
    570GTX
    560GTX-Ti 448
    560GTX-Ti
    560GTX
    560GTX-SE
    550GTX Ti
    GTX 480
    GTX 460
    GTX 675M
    GTX 670M
    GTX 580M
    GTX 570M
    GTX 560M
    GTX 470M
    GTX 460M
    GT 555M
    GT 635M
    [635M used in ASUS K75VJ-TY087H is NOT Supported]
    Quadro 4000M
    Nvidia Graphics cards from Kepler Series:
    GTX TITAN
    GTX 780
    GTX 780 Ti
    GTX 770
    GTX 690
    GTX 680
    GTX 670
    GTX 660 Ti
    GTX 660
    GTX 660 OEM
    GTX 650 Ti
    GTX 780M
    [for details refer to GTX 780M  feature details below]
    GTX 770M
    [for details refer to GTX 770M feature details below]
    GTX 765M
    [for details refer to GTX 765M  feature details below]
    GTX 760M
    [for details refer to GTX 760M feature details below]
    GTX 750M
    [for details refer to GTX 750M feature details below]
    GTX 670MX
    [for details refer to GTX 670MX feature details below]
    GTX 675MX
    [for details refer to GTX 675MX feature details below]
    GTX 860M (Maxwell based 860M are not supported)
    [for details refer to GTX 860M feature details below]
    GTX 870M
    [for details refer to GTX 870M feature details below]
    GTX 880M
    [for details refer to GTX 880M feature details below]
    Other Supported Nvidia cards::
    GTX TITAN X
    [for details refer to GTX TITAN X feature details below]
    -Supported features:
           * Maximum Boost Frequency adjustment [Auto adjust for P0/P2]
           * Boost table Frequency adjustment [automatically re-arrange boost table based on max boost freq. input]
           * Configure Essential Clocks (Default clock, Boost clock)
           * P-State Terminator [ability to Disable/Enable desired P-state{P0,P2,P5,P8}]
           * Vendor ID changer: Allow you to choose between 32 different vendors and change vendor ID to desired one
           * Memory clock adjust for P0, P2,P5, P8
           * FAN control:
               + Configure Fan speed range in (%)
               + Configure boot Fan Duty PWM in (%)
               + Configure FAN OS range in (RPM)
               + Configure Temp Curve for Trigger point 1,2,3
               + Configure FAN Curve % for Trigger point 1,2,3
               + Configure FAN Curve RPM for Trigger point 1,2,3 + % calculation per point based on FAN min/max RPM
           * Voltage control:
               + Maximum Voltage adjustment
               + Min/Max Voltage adjustment per P0,P2,P5 P-States
           * Power control:
               + Adjust Default Board Power
               + Adjust Maximum Board Power
               + Configure 100% Power Target
               + Configure Maximum Power Target
               + Configure extended Power tables modifications [4 tables policy, 8 power offsets]
               + Configure PTS Target Junction Temp
               + Configure PTS Max Acoustic Speed
               + Configure PTS Base Power Limit
    Added New add-on Feature related to MSI Notebooks only:
    Current Supported MSI EC Firmwares for Notebooks models,
     by addiction new feature MSI EC-FW Editor are::
      [Note that this feature is not related to vbios modifications!]
        - GT70 0NC
        - GT70 0ND
        - GT70 0NE
        - GT70 Dragon Edition
        - GT70-0NH Workstation
        - GT70 Dragon Edition 2 Extreme
        - GT70 Dragon Edition 2
        - GT70 2OC
        - GT70 2OD
        - GT70-0NG Workstation
        - GT70-2OL Workstation
        - GT70-2OK Workstation
        - GT60 2OD 3K IPS Edition
        - GT60 2OC 3K IPS Edition
        - GT60-2OJ Workstation
        - GT60-2OK Workstation - 3K IPS Edition
        - GT60 2OD
        - GT60 2OC
        - GT60-0NF Workstation
        - GT60-0NG Workstation
        - GT60 0NE
        - GT60 0ND
        - GT60 0NC
        - GE70 2OD
        - GE70 2OE
        - GE70 2OC
        - GE70 0ND
        - GE70 0NC
        - GE60 2OD
        - GE60 2OE
        - GE60 2OC
        - GE60 0ND
        - GE60 0NC
        - GX70 Destroyer
        - GX70 3BE
        - GX60 Destroyer
        - GX60 3BE
        - GX60 Hitman Edition
        - GX60 1AC
        - GS70 STEALTH
        - GE40 2OL
        - GE40 2OC Dragon Eyes
        - GT70 Barabone [1763]
        - GT70 Barabone [1762]
        - GT70 Medion Eraser X7821 [1762]
        - iBuypower Valkyrie CZ-27 [1762]
        - GT60 Barabone [16F3]
        - GE70 2PE Apache Pro
        - GE70 2PC Apache
        - GE60 2PE Apache
        - GE60 2PC Apache
        - GP70 2PE Leopard
        - GP60 2PE Leopard
        - GT70 2PE Dominator Pro
        - GT70 2PC Dominator
        - GT60 2PE Dominator Pro
        - GT60 2PC Dominator
        - GT60 2PE Dominator 3K Edition
        - GT60 2PC Dominator 3K Edition
        - GS70 2PE Stealth Pro
        - GS70 Barabone
        - GS60 2PC Ghost
        - GS60 2PC Ghost 3K Edition
        - GS60 2PE Ghost Pro 3K Edition
        - GS60 2PE Ghost Pro 3K Gold Edition
        - GS70 2PC Stealth
        - GT72 2PC DOMINATOR
        - GT72 2PE DOMINATOR PRO
        - WT70-2OK GT60-2OK WORKSTATION 3K IPS EDITION
        - WT70-2OK
        - WT70-2OL
        - WT60-2OK 3K IPS EDITION
        - WT60-2OJ
        - WS60 2OJ (3K IPS EDITION)
        - WS60 2OJ
        - GS60 2QE GHOST PRO 3K
        - GS60 2QE GHOST PRO
        - GT72 2QD Dominator
        - GT72 2QE Dominator Pro
        - GS70 2QE STEALTH PRO
        - GS70 2QE STEALTH PRO RED EDITION
        - GE60 Barabone [MS-16GC based]
        - GT70 Medion     [MS-1763 based]
        - GS30 2M Shadow
        - GE62 2QE APACHE
        - GE62 2QF APACHE PRO
        - GT80 2QE TITAN SLI
        - GT80 2QD Titan SLI
        - GT72 DOMINATOR DRAGON EDITION
        - GT72 DOMINATOR PRO DRAGON EDITION
        - GT60 2QD DOMINATOR 3K EDITION
        - GT60 2QD DOMINATOR
        - GT70 2QD DOMINATOR
        - GT60 2QE DOMINATOR PRO 4K EDITION
        - GT60 2QD DOMINATOR 4K EDITION
        - GS70 2QE STEALTH PRO SILVER EDITION
        - GS60 2QE GHOST PRO 4K GOLD EDITION
        - GS60 2QE GHOST PRO 4K
        - GS70 2QD STEALTH
        - GS60 2QD GHOST
        - GE60 2PL APACHE
        - GE70 2PL APACHE
        - GE40 2PC DRAGON EYES
        - GE60 2PF APACHE PRO
        - GE60 2PG APACHE
        - S20 SLIDER 2
        - GE72 2QE APACHE
        - S20
        - S30
        - S12T
        - GS70 2QC STEALTH
        - GS70 2QC Barabone
        - GT72_ODM_Barabone
        - GT72_Barabone
        - GE62 2QD APACHE
        - GE72 2QD APACHE
        - PE70 2QE
        - PE70 2QD
        - PE60 2QE
        - PE60 2QD
        - GT60 Medion     [MS-16F3 based]
        - PX60 2QD
        - GS60 2PM
        - GS60 2PL GHOST
    MSI EC-FW Editor Feature details:
      * Allow you to tweak the FAN Curve,
      Temp Curve and Temp Threshold Hysteresis value for both CPU and GPU(discrete) of the Notebook,
     which is controlled by Embedded Controller.
     The MSI EC-FW Editor allow you to modify and customize,
     the firmware image for your Embedded Controller used in your notebook by desired way.
     Allow you to tweak 126 EC-FW values related to the FAN of the notebook.
     The FAN values include different FAN tables,[9 total, with 2 general types: CPU and GPU + Extended tables]
     each table contain 3 main components:
     temp trigger points in degrees(°C), FAN speed in % per each one of the trigger points.
     and temp threshold hysteresis value for each table sets(temp curve & fan curve)
    Update: Add ability to copy entire rows with values of either temp or fan type:
         Usage and more info:  Since there are too many values available for modification,
         depend of models [126 or 168] if all need to be edited it can take too much time.
         Therefor now you can also copy entire row of the values from the same time,
         ie: temp to temp or fan to fan. 1st two tables defines CPU & GPU fan profiles,
         which you can use as sample to spread quickly over all other tables.
         you can do this by enter 2 letters one after another,
         where the 1st one will be the source and the second one will be the target row.
         Source rows can be only any from the 1st 4, ie: a,b,c,d  while the target rows can be any row.
         Normally they has repeatable pattern, so you can config 1st 4 by your taste,
         then copy all of them over all others very quickly. And if needs any small change, fine tune,
         you can always edit any of the 126 or 168 values individually.
         UPDATE: Add new feature:
          - Allow Temp Threshold Hysteresis modification CPU/GPU, available for all supported MSI Notebooks
     Quick EC-FW image Modification Guide:
     1. Load EC-FW image that you want to customize.
        -Where i can get it?
        -Go to msi web page for your notebook model, then choose download and navigate to firmwares.
    Check your current EC version 1st, go to BIOS Setup,[press "Del" key during bios post/logo screen]
    then you can see EC VER in System Info.
    Download and use the same EC type, ie: if your current is: xxxxxx.405 , use the same xxxxxx.4xx type
    or if you current one is .5xx, use .5xx firmware
     2. Modify the FAN table(s) values to desired one with MSI EC-FW Editor, then save it.
     3. Proceed with EC Flashing:
        * Before proceed with EC flash make sure that both battery and AC charger are attached to the notebook.
        The EC image file archive file can come with DOS or Windows Flasher, or both.
        DOS instructions, example: [archive example: 1762EMS2.414.zip ]
        with extracted files from archive to some folder: 1762EMS2.414, CheckSum.txt, ECALL.BAT, ENEF_030.EXE
        after modify the EC firmware[from the example above its: 1762EMS2.414] by MSI EC-FW Editor
        with desired FAN values, after modification of the EC-FW is done:
        delete CheckSum.txt located in the same folder, create bootable USB key,
        once done copy all files to the USB key[which is already bootable], ie copy to the USB key:
        1762EMS2.414,ECALL.BAT, ENEF_030.EXE
        reboot notebook and press 'F11', then choose your USB key from the list and hit ENTER.
        Note: For those Notebook who use Windows8 BIOS,
        you need to set in BIOS Setup boot mode to Legacy and to Disable secure boot before try to boot from the USB key.
        When you see A:\ or C:\, type:
        ECALL.BAT [ENTER]
        wait to finish, then turn off your notebook [press and hold the power button]
        Then do EC Reset: https://forum-en.msi.com/faq/article/how-to-reset-the-ec-embedded-controller
        And you are done.
        Windows instructions, example: [archive example: w8_1762EMS2.505.zip ]
        after modify the EC firmware[from the example above its: 1762EMS2.505 ] by MSI EC-FW Editor
        with desired FAN values, after modification of the EC-FW is done:
        delete CheckSum.txt located in the same folder, then run autoflash.exe
        if autoflash.exe doesn't exist, then execute winflash.exe
        When flashing is done, do EC Reset: https://forum-en.msi.com/faq/article/how-to-reset-the-ec-embedded-controller
        And you are done.
       NOTES: The guide above is when you use original EC-FW name.
       If you gonna change the original name before flashing [not recommended]
       you have to follow this rules and do an extra steps:
          - do not rename 1st 8 characters from the file name,
          you can rename only the file name extension of the EC-FW,
         ie: .xxx because there is build in protection in the flasher who check the names on flash attempt.
          - DOS Flashing: You also have to edit ECALL.BAT to replace the EC-FW name with your renamed one.
          - Win Flashing: You also have to edit config.ini to replace the EC-FW name with your renamed one.
    Note: Kepler mobiles are not supported!
    Eventually they can be added later in time, but for now they are not supported.
    For recent info and updated info check *** below.
    Partially supported models: [in build process]
    GTX 780M  feature details:
    Support voltage adjust for  P0, P5, P8
    Support master voltage adjust
    Support Software Voltage control [On/Off]
    Support Software Voltage definition and adjustment
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support additional performance tweaks and optimizations
    Support GPU Boost logic Enable/Disable
    Support Software Power Control [Off/On]
    Support default Power Target adjust
    Support max Power Target adjust
    Support Power Limit % adjust[by modify default & max power targets] and calc
    Support P-State Terminator [ability to Disable/Enable desired P-state]
    GTX 770M  feature details:
    Support voltage adjust for  P0, P5, P8
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support GPU Boost logic Enable/Disable
    Support Software Power Control [Off/On]
    Support default Power Target adjust
    Support max Power Target adjust
    Support Power Limit % adjust[by modify default & max power targets] and calc
    Support Undervolting
    GTX 765M  feature details:
    Support voltage adjust for  P0, P5, P8
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support GPU Boost logic Enable/Disable
    GTX 760M  feature details:
    Support voltage adjust for P0, P5, P8
    Support master voltage adjust
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support GPU Boost logic Enable/Disable
    750M  feature details:
    Support voltage adjust for P0, P5, P8
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support GPU Boost logic Enable/Disable
    GTX 670MX  feature details:
    Support voltage adjust for P0, P5, P8
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support Software Voltage control [On/Off]
    Support Software Voltage definition and adjustment
    GTX 675MX  feature details:
    Support voltage adjust for P0, P5, P8
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support Software Voltage control [On/Off]
    Support Software Voltage definition and adjustment
    GTX 860M , GTX 870and GTX 880M feature details:
    Support voltage adjust for  P0, P1,P5, P8
    Support higher clock's voltage adjust
    Support memory clock adjust for P0, P1, P5, P8
    Support Maximum Boost Frequency adjust [Auto adjust for P0, P1]
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support GPU Boost logic Enable/Disable
    Support P-State Terminator [ability to Disable/Enable desired P-state(P0,P1,P5,P8)]
    Support for power control modifications
    K3000M feature details:
    Support voltage adjust for P0,P5, P8
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support GPU Boost logic Enable/Disable
    Support P-State Terminator [ability to Disable/Enable desired P-state(P0,P5,P8)]
    EDIT: Voltage adjust and power control has been also added:
    * Add voltage adjust for supported Kepler GPUs [available at voltage tune]
    * Add power control for supported Kepler GPUs [available at power control]
        -Board Power (default/max)
        -Power Target (100%/max)
        + calc. and shows power Limit % in real time before apply desired changes.
    EDIT2:  Add Memory frequency adjustment for Kepler supported cards for states [P0,P2,P5,P8]
    EDIT3: Add Core Management support for Kepler's GPU:
       - Configure P-State Maximum Frequency [Sub domains auto applied based on desired frequency]
       - Configure Maximum Voltage Frequency [Sub domains auto calculated with 26MHz steps and applied based on desired frequency]
       - Configure Essential P-State (Default clock, Boost clock, domain 3[when Turbo Boost is ON])
          [chooses auto determinate based on P-State and Voltage Frequency, domain 4 auto adjust depend of Boost state]
       - Configure 3D Boost and Turbo Boost [N/A For GTX TITAN]
    EDIT4: For Full supported Mobile Keplers [780M only for now]
    - Add core management support:
                 + Config Maximum Boost Frequency
                 + Config Maximum Boost table Frequency /* Automatic calculate and re-arrange boost table based on single max clock input */
                 + Config Essential Domains (1,2,3) /* Default, Boost & Max clocks */
                 + Remove Software GPU core OC Limit /* Sets to optimal level */
                 + Apply additional performance tweaks  /* Addiction optimizations which could improve VGA performance]
    EDIT5: [GTX780 only]
    - Add ability to turn off/on GPU Boost logic //* available  under core management *//
    EDIT6: [780M only] , Update voltage control with new add-ons:
    - Add ability to turn off/on GPU Boost logic //* available  under core management *//
    - Update voltage control for more precision control:
            > Allow undervolting
            > Allow master voltage adjust
            > Allow software voltage control
            > Allow software voltage control definition
    EDIT7: [780M and 770M only]:
           > Allow Power control
               [GTX780 only]:
           > Allow Max Voltage adjustment [under voltage thread]
    EDIT8: [GTX780 only]
      Add eXpert FAN control in addiction to standard Fan modifications, newest one add-on:
       > FAN Curve Control:
         - Trigger control point 1:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==> RPM Tolerance %
         - Trigger control point 2:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==>  RPM Tolerance %
         - Trigger control point 3:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==>  RPM Tolerance %
       > FAN OS Min [RPM]
       > FAN OS Max [RPM]
    EDIT9:[GTX770 and GTX780 only]
      Add eXpert FAN control in addiction to standard Fan modifications, newest one add-on:
       > FAN Curve Control:
         - Trigger control point 1:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==> RPM Tolerance %
         - Trigger control point 2:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==>  RPM Tolerance %
         - Trigger control point 3:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==>  RPM Tolerance %
       > FAN OS Min [RPM]
       > FAN OS Max [RPM]
    * Update 760M:
          - Add core management support:
             :Maximum Boost Frequency
             :Maximum Boost table Frequency
             :Essential Domains 1,2,3
             :GPU core OC software Limit removal
             :GPU Boost logic Enable/Disable
          - Update voltage control: Add master voltage adjustment
    * Update 765M:
         - Add core management support:
             :Maximum Boost Frequency
             :Maximum Boost table Frequency
             :Essential Domains 1,2,3
             :GPU core OC software Limit removal
             :GPU Boost logic Enable/Disable
    *  Update 770M:
      - Add core management support:
             :Maximum Boost Frequency
             :Maximum Boost table Frequency
             :Essential Domains 1,2,3
             :GPU core OC software Limit removal
             :GPU Boost logic Enable/Disable
    * Update GTX 770: Add ability to Enable/Disable boost logic
    EDIT10: Add undervolt ability for 770M
    EDIT11:
      Update GTX 780: - Add support for extended Power tables modifications [6 tables policy, 12 power offsets, type vary: core load, proportional, bang bang, total]
      Update GTX 770:
        - Add support for Max Voltage adjustment
        - Add support for extended Power tables modifications [6 tables policy, 12 power offsets, type vary: core load, proportional, bang bang, total]
    EDIT12: Add support for GTX 780 Ti [supported with full set of currently available features that's also available for GTX 780 & GTX 770]
    EDIT13:
    * Improve FAN control for GTX 780 Ti, GTX 780, GTX 770:
       - now also adjust duplicate min/max FAN % entry for listed models,
     [its done automatically when standard min/max FAN % is adjusted]
    * Update GTX 780 Ti: Improve max boost mode operation,
     with auto sync and update for P0,P2,P5 states.
      [GTX 780 Ti has different boost method that any others cards before]
    * Update GTX TITAN: Add external Power profiles support
    * Add new feature P-State Terminator for GTX 780 Ti, GTX TITAN,GTX 780, GTX 770: 
       - Allows to Disable/Re-Enable desired P-State(s)
    EDIT14:
    * Update Fan Curve control for GTX 780 Ti, GTX 780, GTX 770:
       - Add support for FAN duty % modification per trigger points
    * Add new feature PTS (perf. test specs) modification for GTX 780 Ti, GTX TITAN,GTX 780, GTX 770: 
       - Allow PTS Max Acoustic Speed modification
       - Allow PTS Base Power Limit modification
       - Allow PTS Target Junction Temp modification
    EDIT15:
    * Add new feature for: GTX 780, GTX 780 Ti, GTX 770, GTX TITAN:
          - FAN Acceleration Model modification for more smooth FAN control, details:
               show fan acc model OS value hex: yes
               detect and show synchronization status with boot acceleration model: yes
               manual/direct modification: no
               automatic modification: yes
               automatic synchronization of fan acc model between OS & Boot mode: yes
          More info: FAN Acceleration Model will be automatically generated,updated and synchronized with boot model,
          when we adjust general min/max FAN % values.
          Other factors that can effect its value while processed for adjustment,
          is the value of the FAN % for middle point of the fan curve.
    EDIT16:  Add new feature for: GTX 780, GTX 780 Ti, GTX 770, GTX TITAN:
          - Vendor ID changer: Allow you to choose between 32 different vendors and change vendor ID to desired one.
     [the new feature is available under core management for those units]
    EDIT17:  Add new feature for MSI Notebooks from gaming series,
     called "MSI EC-FW Editor"
    EDIT18: Update MSI EC-FW Editor [details in versions change log]
    EDIT19: Add support for 670MX & 675MX
     * Update EC Tuner:
             - Add support for GT70 Barabone [1763]
             - Add support for GT60 Barabone [16F3]
             - Add support for msi's special T16 & T17 EC's for 1762 & 16F3
     * Update 780M: Add support for P-State Terminator [ability to Disable/Enable desired P-state]
    Support advanced FAN adjust features for Kepler:
    - Configure Fan speed range in (%)
     - Configure Fan speed range in (RPM)
     - Configure boot Fan Duty PWM in (%)
    Supported OS:
    XP, Vista, Windows 7 [all kind of sub versions]
    Both 32-bit and 64-bit OS versions.
    >>>Change Log information is in post #2 <<<
    Svet's VBIOS Tuner is available on donation:
    >>>
    <<<
    Once donation is done, the Tool will be e-mailed to the co-respond person,
    who also will gain donation free further versions{updates} of the Tuner.
    [etc. this donation is need only once per person]
    [if someone wish to donate further, it can be done directly from Tool's main interface where can be set a custom
    donation amount]
    Further released Tuner's versions will be available via tool's self update feature:
    Best Regards,
    Svet
    NOTE:  All modifications which you do are entirely at your own risk!

    Versions Change logs:
    Version has been updated [ 0.12c ==> 0.18e ]:
    Changes:
    - Add voltage[load & max voltage] read/write support for latest and special MSI's 580 Lightning
    VBIOSes above version 130
    Version has been updated [ 0.18e ==> 0.33f ]:
    Changes:
    - Updated VBIOS-Z Report Engine
    - Fixed issue: Tuner cannot work in Vista/Windows7 if UAC is Enabled, caused an error "A referral was returned from
    the server."
    Version has been updated [ 0.33f ==> 0.56p ]:
    Changes:
    - Add support for GTX 570M
    Version has been updated [ 0.56p ==> 0.75s ]:
    Changes:
    - Add support for GTX 570M [secondary different general type]
    - Add support for GTX 560M [2 different general types]
    Version has been updated [ 0.75s ==> 0.83x ]:
    Changes:
    - Add voltage adjustment support for 560M
    - Add alternative GPU clock booster for Mobility Series
    Version has been updated [ 0.83x ==> 0.92a ]:
    Changes:
      - Allow P1 state clocks modifications for mobility Series for cases:
    560M[Type1, Type2], 570M[Type1, Type2] in both Synchronized[GPC,LTC,XBAR] & Asynchronized [GPC only] GPU Clocks
    adjust.
    560M[Type1, Type2], 570M[Type1, Type2] Memory Clock adjust.
    560M[Type1, Type2], 570M[Type1, Type2] Voltage adjust auto apply to both P1/P0 states.
      - Extend voltage limit for 570M[Type1, Type2] to 920mV
    Version has been updated [ 0.92a ==> 1.07f ]:
    Changes:
    - Updated VBIOS-Z Engine
    - Updated appearance [cosmetic corrections]
    - Allow P8 core clocks modifications for 570M [Type1, Type2]
    - Limit LTC and XBAR clocks domains in P8 state when is used Synchronized mode to 598MHz with regard less of GPC
    clock.
    - P1 and P0 voltages for 570M [Type1, Type2] now can be controlled separately
    - Allow P8 voltage modification for 570M [Type1, Type2]
    - Allow P8 memory clock adjustment for 570M [Type1, Type2]
    - Improved handle method for 570M [Type1, Type2] & 560M [Type1, Type2]
    - Allow P1 and P0 separate voltages control for 560M [Type1, Type2]
    - Allow P12 and P8 voltages adjustment for 560M [Type1, Type2]
    - Implement Self Update Feature [Tuner now can self update when a newest further version is released]
    Version has been updated [ 1.07f ==> 1.09h ]:
    Changes:
    - Add support for new kind of VBIOS image for 570M  [70.24.32.00.04(GT780DX/GTX570M/3GB DDR5)]
    Version has been updated [ 1.09h ==> 1.11j ]:
    Changes:
    - Fixed issue introduced in version 1.09h[from yesterday] cannot modify voltage for [70.24.32.00.04
    (GT780DX/GTX570M/3GB DDR5)]
    Version has been updated [ 1.11j ==> 1.12k ]:
    Changes:
    - Support experimental[non standard] vBIOS 570M image[a variable of type1]
    Version has been updated [ 1.12k ==> 1.13p ]:
    Changes:
    - Add support for GTX 460M [2 different general types]
    Version has been updated [ 1.13p ==> 1.14s ]:
    Changes:
    - Add support for GTX 580M
    Version has been updated [ 1.14s ==> 1.16x ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Update GTX 580M: Add support for secondary and different general vBIOS type.
    - Add support for GT 555M, 2 different general vBIOS types.
    Version has been updated [ 1.16x ==> 1.17a ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Update GTX 560M:
       * Allow P8 frequency modifications [voltage is already available]
       * Add support for another and different general vBIOS type of 560M
    - Allow P8 and P12 frequency and voltage modifications for 560GTX-Ti
    - Add support for GT 635M
    Version has been updated [ 1.17a ==> 1.19d ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Reduce low freq. limit from 100MHz to 20Mhz  [Usefull for P12 freq. modifications]
    - Add support for 560GTX-Ti 448
    [recently released card, such as: [example for msi's representative cards: N560GTX-448 Twin Frozr III Power
    Edition, N560GTX-448 Twin Frozr III Power Edition/OC]]
    Version has been updated [ 1.19d ==> 1.20f]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Add Support for GTX 470M + auto correct GPU-Z's dump issue if and when needs.
    [auto remove unnecessary padding when such exist in vbios image when saved with GPU-Z]
    - Update GTX 460M: Add support for 3th different general vBIOS type.
    Version has been updated [ 1.20f ==> 1.25g ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Add Support for GTX 670M
    - Add Support for GTX 675M
    Version has been updated [ 1.25g ==> 1.26k ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Update GTX 560M[Type1,Type2]: Allow P12 clock modifications
    - Add Support for GTX 560SE
    Version has been updated [ 1.26k ==> 1.27n ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Update GTX 580M[Type1,Type2]:
      * Allow P12 clock and voltage modifications
      * Allow manual LTC and XBAR clocks input[linked together, one input will update them both] for P8 and P12 states
    For P0 and P1 states, they works as for all others, i.e, depend of choose:
    In Synchronized mode: LTC and XBAR clocks will be automatically calculated and updated based on their ratio,
    [keeping the same ratio] and based on user GPC clock input.
    In Asynchronized mode: Only GPC will be modified depend of user input. LTC and XBAR clocks will remain as is.
    Version has been updated [ 1.27n ==> 1.28s ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Update GTX 580M: Add support for newest release different vBIOS type 3
    - Update 560GTX-SE: Add support for vBIOS type 2
    - Other tool optimization
    Version has been updated [ 1.28s ==> 1.29t ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Update GTX 570M related to all vbios types[1,2,3]:
      * Allow P12 clock and voltage modification
      * Improve P8 and P12 core clock modification, allow manual synchronized[one value will update both of them] LTC
    and XBAR clock adjustment [along with GPC clock with separate clock selection] as ratio between GPC to LTC & XBAR
    is too high to follow.
    Version has been updated [ 1.29t ==> 1.30u ]:
    - Update 560GTX-Ti: Add support for newest vbios type.
    Version has been updated[user request] [ 1.30u ==> 1.31x]:
    - Update 560GTX-Ti 448: Add support for newest vbios type.
    Version has been updated  [ 1.31x ==> 2.33a ]:
    - Update self update module
     - Add support for various Kepler VGA's, include support for Hybrid UEFI vBIOSes.
    Supported Kepler units:
        * GTX 680 [4 different general types]
        * GTX 670 [2 different general types]
        * GTX 660 Ti
        * GTX 660 [2 different general types]
    Note: Only FAN adjust feature[See *** below for details] are supported for Kepler's vBIOS for now.
    More features can be added with further versions.
    - Add advanced Kepler's FAN adjust features:
       1 Configure Fan speed range in (%)
       2 Configure Fan speed range in (RPM)
       3 Configure boot Fan Duty PWM in (%)
    Version has been updated  [ 2.33a ==> 2.35d ]:
    * Improve tool performance
    * Update boot Fan Duty PWM to add support for 660Ti new type GB variable.
    * Adjust low FAN limit to 5%
    * Add voltage adjust for supported Kepler GPUs [available at voltage tune]
    * Add power control for supported Kepler GPUs [available at power control]
        -Board Power (default/max)
        -Power Target (100%/max)
        + calc. and shows power Limit % in real time before apply desired changes.
    Version has been updated  [ 2.35d ==> 2.36f ]:
    * Add Memory frequency adjustment for Kepler supported cards for states [P0,P2,P5,P8]
    Version has been updated  [ 2.36f ==> 2.37g ]:
    * Add support for GTX 660 OEM
    * Change minimum boot Fan Duty PWM to 10% [when operating outside Windows]
    Version has been updated  [ 2.37g ==> 2.40k ]:
    * Add support for new vbios type variable of GTX 680
    * Add support for Quadro 4000M
    * Add Core Management support for Kepler's GPU:
       - Configure P-State Maximum Frequency [Sub domains auto applied based on desired frequency]
       - Configure Maximum Voltage Frequency [Sub domains auto calculated with 26MHz steps and applied based on desired
    frequency]
       - Configure Essential P-State (Default clock, Boost clock, domain 3[when Turbo Boost is ON])
          [chooses auto determinate based on P-State and Voltage Frequency, domain 4 auto adjust depend of Boost state]
       - Configure 3D Boost and Turbo Boost
    Version has been updated  [ 2.40k ==> 2.41s ]:
    * Fixed issue: Unable to read clocks and voltage correctly for Zotac 680 GTX
    Version has been updated  [ 2.41s ==> 2.42t ]:
    * Updated self update module
    * Add support for GTX 650 Ti
    * Add support for GTX TITAN
    * Allow minimum FAN 0%
    Version has been updated  [ 2.42t ==> 2.43w ]:
    * Fixed update issue, at some machines sometimes cannot find the new version. [cache issue]
    Version has been updated  [ 2.43w ==> 2.44x ]:
    * Update GTX 670M: Add support for 2 new vbios types, used in system BIOS [not in dedicated card
    bios]
    Version has been updated  [ 2.44x ==> 2.45a ]:
    * Update GTX 670M: Add support for 2 more new vbios types[legacy], used in system BIOS [not in
    dedicated card bios]
    * Update GTX 650 Ti:
         - Add support for new vbios type
         - Improve core boosting
         - Improve compatibility with future vbios types
    * Update GTX 670:  Add support for new vbios type with GOP Support.
    Version has been updated  [ 2.45a ==> 2.46b ]:
    * Update GTX 660 Ti:  Add support for new vbios type with GOP Support.
    * Update GTX 660:  Add support for new vbios type.
    * Update GTX 680:  Add support for new vbios type.
    * Modify descriptions for some items for better clarify.
    * Update GTX TITAN:
         - Allow P-State voltage modifications.
         - Add addiction experimental test voltages [1225mV,1237mV,1250mV] for those who want to try and test it.
         - Adjust boot FAN duty range.
    * Update certain modules to cause less false alerts for some too sensitive AVs
    * Update Kepler Core Management:
       - Applied new boosting rules
       - Update boosting tables
       - Extent region range of allowed selection
       - Improve performance
    * Add initial support for GTX 780M [allow memory clock adjust for all P-States]
    Version has been updated  [ 2.46b ==> 2.47c ]:
    * Update GTX 680:
       - Add support for new vbios type with GOP support
       - Add support for new vbios type
       - Improve compatibility with future vbioses
    * Add support for GTX 460
    * Add support for GTX 780
    * Add support for GTX 770 [2 different general types]
    * Update GTX 780M: Add support for new general type.
    Version has been updated  [ 2.47c ==> 2.48f ]:
     Partially supported: [in build process]
    * Update 780M: Add voltage control ability
     * Add support[memory & voltage control for now] for 770M, 760M, 765M, 675MX
     * Update 780M: Add support for new vbios type
      Fully supported:
    * Add support for GTX480
     * Add support for GTX690
     * Update GTX770: Add support for new images type with GOP support
     * Update GTX780: Add support for new vbios type
    Version has been updated  [ 2.48f ==> 2.49h ]:
     Partially supported: [in build process]
      *Update 675MX: Add support for new vbios type
      Fully supported:
        * Update GTX780: Add support for 2 new vbios types
        * Update 780M:
            - Add support for new vbios type
            - Add core management support:
                 + Config Maximum Boost Frequency
                 + Config Maximum Boost table Frequency /* Automatic calculate and re-arrange boost table based on
    single max clock input */
                 + Config Essential Domains (1,2,3) /* Default, Boost & Max clocks */
                 + Remove Software GPU core OC Limit /* Sets to optimal level */
                 + Apply additional performance tweaks  /* Addiction optimizations which could improve VGA
    performance]
    FYI: Some test results. Was able to test for some time latest tuner version on MSI GT70 Dragon[i7-4930MX with
    780M],
    after many tests with 780M boosted by vbios tuner 2.49h, higher reached scores in 3dmark11
    was able to archive P8557 [but forgot to store/save the result..],
    got saved some of the previsions test result  P8499 : http://www.3dmark.com/3dm11/6781702
    Which smoke away, the "Eurocom X5 with GTX 780M and i7-4930MX Dominates Benchmarks":
    http://www.techpowerup.com/185935/eurocom-x5-with-gtx-780m-and-i7-4930x-dominates-benchmarks.html
    with their P8001 scores in 3Dmark11 with the same hardware used.
    Version has been updated  [ 2.49h ==> 2.50k ]:
    Changes:
    * Extent memory clock range. [read/write operations and allow higher selection]
    * Extent max. boost clock range for desktop Keplers
    * Update GTX780:
        - Add support for 5 new different vbios types
        - Add ability to turn off/on GPU Boost logic  //* available under core management *//
    * Update 780M
        - Add ability to turn off/on GPU Boost logic //* available  under core management *//
    Version has been updated  [ 2.50k ==> 2.51r ]:
    Changes:
     Partially supported:
      * Update 675MX: Add support for 2 new vbios types
      * Update   770M: Add support for 1 new vbios type
     * Fixed recently introduced issues:
         - Core management can't proceed some Fermi vbios images
         - Cosmetic issue, black bar appears at specified conditions under core management
         - Memory adjust selection over 4000 resets to 2300+
    * Update   780M:
         - Update voltage control for more precision control, new add-on:
            > Allow undervolting
            > Allow master voltage adjust
            > Allow software voltage control
            > Allow software voltage control definition
      * Modify installer to add addiction desktop shortcut to selfupdate module
      * Add "Open","Save" and "Img Loc"[show current working image] as addiction functions for vbios images for more
    comfortable controls
    Version has been updated  [ 2.51r ==> 2.52s ]:
    Changes:
    * Update  780M: Add support for new vbios type
    Version has been updated  [ 2.52s ==> 2.53t ]:
    Changes:
    * Update  780M:
       - Add support for new vbios type
       - Allow Power control
    * Update  770M: [partially supported]
       - Add support for new vbios type
       - Allow Power control
    * Update GTX780:
       - Add support for new vbios type
       - Allow Max Voltage adjustment [under voltage thread]
    Version has been updated  [ 2.53t ==> 2.54x ]:
    Changes:
    * Update FAN Control for Kepler GPUs:
       - Show all detected results and update them in real time based on our modifications for more comfortable
    control.
    * Add eXpert FAN Control for GTX 780:
       To Standard[current supported] modifications:
         - FAN Min [%]
         - FAN Max [%]
         - FAN Min [RPM]
         - FAN Max [RPM]
         - FAN Boot Duty [%]  --> [This also will modify Dust Removal Technology speed for the cards who
    support such.]
       Now plus new one: [For GTX 780 only, for now]
       > FAN Curve Control:
         - Trigger control point 1:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==> RPM Tolerance %
         - Trigger control point 2:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==>  RPM Tolerance %
         - Trigger control point 3:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==> RPM Tolerance %
       > FAN OS Min [RPM]
       > FAN OS Max [RPM]
    Version has been updated  [ 2.54x ==> 2.55y ]:
    Changes:
    * Add support for new vBIOS types:
        - 780M: +1
        - 770M: +1
        - 765M: +1
        - 760M: +1
        - GTX 770: +3
    * Add eXpert FAN Control for GTX 770:
       To Standard[current supported] modifications:
        - FAN Min [%]
         - FAN Max [%]
         - FAN Min [RPM]
         - FAN Max [RPM]
         - FAN Boot Duty [%]  --> [This also will modify Dust Removal Technology speed for the cards who
    support such.]
       Now plus new one: [For GTX 770 and GTX 780 only, for now]
       > FAN Curve Control:
         - Trigger control point 1:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==> RPM Tolerance %
         - Trigger control point 2:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==>  RPM Tolerance %
         - Trigger control point 3:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==> RPM Tolerance %
       > FAN OS Min [RPM]
       > FAN OS Max [RPM]
    * Update appearance.
    * Fixed cosmetic issue, when enter to adjust FAN OS RPM, min FAN OS RPM is not shown.
    * Update GTX 770: Add ability to Enable/Disable boost logic
    * Update 780M: Fixed compatibility issue which cause voltage management to unable to proceed an vbios
    * Update 760M:
          - Add core management support:
             :Maximum Boost Frequency
             :Maximum Boost table Frequency
             :Essential Domains 1,2,3
             :GPU core OC software Limit removal
             :GPU Boost logic Enable/Disable
          - Update voltage control: Add master voltage adjustment
    * Update 765M:
         - Add core management support:
             :Maximum Boost Frequency
             :Maximum Boost table Frequency
             :Essential Domains 1,2,3
             :GPU core OC software Limit removal
             :GPU Boost logic Enable/Disable
    *  Update 770M:
      - Add core management support:
             :Maximum Boost Frequency
             :Maximum Boost table Frequency
             :Essential Domains 1,2,3
             :GPU core OC software Limit removal
             :GPU Boost logic Enable/Disable
    Version has been updated  [ 2.55y ==> 2.56z ]:
    Changes:
    * Update 760M: Add support for new vbios type
     * Fixed cosmetic issue, core management GK ID incorrect for some of recently added cards
     * Improve Updater to handle some custom cases, auto detect if there is customized cache location to be able to
    clear old cache data before check for update.
    Version has been updated  [ 2.56z ==> 2.57a ]:
    Changes:
     * Update 770M: Add support for new vbios type. [to fix issue wrong core clocks and boost logic N/A
    with specified new vbios image]
     * Add test vbios support for specified 670MX vbios image, for testing purpose only.[memory and voltage support]
        [Else 670MX in general remain unsupported]
     * Update 765M: Add support for new vbios type.
     * Modify recently added addiction save module to avoid false detection issue with Norton AV
     * Applied new hotkey rules inside threads to be equal for all of them as followed:
           - "A" ==> Abort and going back to main menu and discard any changes done in current thread. 
           - "S" ==> Save changes and going back to main menu.
    Version has been updated  [ 2.57a ==> 2.58c ]:
    Changes:
    * Fixed cosmetic issue at some places was still shows 'Q' to abort instead 'A'
     * Fixed recently introduced issue 760M vbios-z and core management error
     * Fixed recently introduced issue GTX TITAN vbios-z error
     * Update test version 670MX:
          - re-calibrate voltage control based on latest test results
          - add support for 2 new vbios types
     * Update GTX TITAN: Add ability to Enable/Disable Boost Logic
     * Modify some .asm sources to avoid false positive suspicion detection for Avast issue
    Version has been updated  [ 2.58c ==> 2.59d ]:
    Changes:
    * Update test version 670MX: Add support for new vbios type
     * Update version 780M: Add support for new vbios type
     * Update GTX780: Add support for new vbios type
     * Update GTX 660 Ti: Add support for new vbios type
    Version has been updated  [ 2.59d ==> 2.60e ]:
    Changes:
    * Update version 770M:
         - Add support for new vbios type
         - Add undervolt ability
    Version has been updated  [ 2.60e ==> 2.61f ]:
    Changes:
     * Update GTX 780:
         - Add support for new vbios type
         - Add support for extended Power tables modifications [6 tables policy, 12 power offsets, type vary: core
    load, proportional, bang bang, total]
     * Update GTX 770:
        - Add support for Max Voltage adjustment
        - Add support for extended Power tables modifications [6 tables policy, 12 power offsets, type vary: core load,
    proportional, bang bang, total]
    Version has been updated  [ 2.61f ==> 2.62g ]:
    Changes:
    * Update GTX 780: Add support for 2 new vbios types
    * Minor update auto updater
    * Fixed recently introduced bug: 780M type 1 vbios image only,  vbios-z and power control error
    * Fixed issue Power control cannot select 1000W
    * Fixed issue Power control class 1a and 1b cannot apply the same values
    * Decrease sound volume by 20%
    * Add support for GTX 780 Ti [supported with full set of currently available features that's also available for GTX
    780 & GTX 770]
    Version has been updated  [ 2.62g ==> 2.63h ]:
    Changes:
    * Update GTX 765M: Add support for new vbios type
    * Improve FAN control for GTX 780 Ti, GTX 780, GTX 770:
       - now also adjust duplicate min/max FAN % entry for listed models,
     [its done automatically when standard min/max FAN % is adjusted]
    * Update GTX 780 Ti: Improve max boost mode operation,
     with auto sync and update for P0,P2,P5 states.
      [GTX 780 Ti has different boost method that any others cards before]
    * Update GTX TITAN: Add external Power profiles support
    * Add new feature P-State Terminator for GTX 780 Ti, GTX TITAN,GTX 780, GTX 770: 
       - Allows to Disable/Re-Enable desired P-State(s)
    Version has been updated  [ 2.63h ==> 2.64j ]:
    Changes:
    * Update Fan Curve control for GTX 780 Ti, GTX 780, GTX 7==> FAN duty % modification per trigger
    points
    * Add new feature PTS (perf. test specs) modification for GTX 780 Ti, GTX TITAN,GTX 780, GTX 770: 
       - Allow PTS Max Acoustic Speed modification
       - Allow PTS Base Power Limit modification
       - Allow PTS Target Junction Temp modification
    Version has been updated  [ 2.64j ==> 2.65k ]:
    Changes:
    * Update GTX 780: Add support for new vbios type +1
    * Update GTX 765M: Add support for new vbios type +1
    * Fixed an cosmetic issue, typo error.
    * Add new feature for: GTX 780, GTX 780 Ti, GTX 770, GTX TITAN:
          - FAN Acceleration Model modification for more smooth FAN control, details:
               show fan acc model OS value hex: yes
               detect and show synchronization status with boot acceleration model: yes
               manual/direct modification: no
               automatic modification: yes
               automatic synchronization of fan acc model between OS & Boot mode: ye==>cceleration Model will be
    automatically generated,updated and synchronized with boot model,
          when we adjust general min/max FAN % values.
          Other factors that can effect its value while processed for adjustment,
          is the value of the FAN % for middle point of the fan curve.
    Version has been updated  [ 2.65k ==> 2.66j ]:
    Changes:
    *  Update GTX 780 Ti and GTX 780: Add support for new vbios type +2 and +1
     *  Add new feature for: GTX 780, GTX 780 Ti, GTX 770, GTX TITAN:
         - Vendor ID changer: Allow you to choose between 32 different vendors and change vendor ID to desired one.   
    [the new feature is available under core management for those units] 
    minor update:
    Version has been updated  [ 2.66j ==> 2.67k ]:
    Changes:
    *  Update GTX 660 Ti: Add support for new vbios type +1
    *  Update GTX 770: Add support for new vbios type +1
    minor and urgent update:
    Version has been updated  [ 2.67k ==> 2.68l ]:
    Changes:
    *  Update GTX 770: Add support for new vbios type +2
    *  Fixed issue: Compatibility issue with latest OS updates, [win7+] caused voltage thread to self terminate.
    *  Minor work speed improvement for all threads
    minor update:
    Version has been updated  [ 2.68l ==> 2.69m ]:
    Changes:
    *  Update 460M: Add support for new vbios, type 4
    *  Update GTX 780 Ti: Add support for new vbios type +1
    Version has been updated  [ 2.69m ==> 2.70n ]:
    Changes:
     * Update GTX 480: Add support for new vbios type +1
     * Update GTX 760M: Add support for new vbios type +1
     * Update GTX 780 Ti: Add support for new vbios type +1
     * Update GTX 780: Add support for new vbios type +1
     * Add new feature for MSI Notebooks from gaming series,
     called "MSI EC-FW Editor".
     Supported MSI Notebooks models are the followed:
        - GT70 0NC
        - GT70 0ND
        - GT70 0NE
        - GT70 Dragon Edition
        - GT70-0NH Workstation
        - GT70 Dragon Edition 2 Extreme
        - GT70 Dragon Edition 2
        - GT70 2OC
        - GT70 2OD
        - GT70-0NG Workstation
        - GT70-2OL Workstation
        - GT70-2OK Workstation
        - GT60 2OD 3K IPS Edition
        - GT60 2OC 3K IPS Edition
        - GT60-2OJ Workstation
        - GT60-2OK Workstation - 3K IPS Edition
        - GT60 2OD
        - GT60 2OC
        - GT60-0NF Workstation
        - GT60-0NG Workstation
        - GT60 0NE
        - GT60 0ND
        - GT60 0NC
        - GE70 2OD
        - GE70 2OE
        - GE70 2OC
        - GE70 0ND
        - GE70 0NC
        - GE60 2OD
        - GE60 2OE
        - GE60 2OC
        - GE60 0ND
        - GE60 0NC
    Version has been updated  [ 2.70n ==> 2.71o ]:
    Changes:
    * Update MSI EC-FW Editor:
       - Add addiction support for followed MSI notebooks:
           } GX70 Destroyer
           } GX70 3BE
           } GX60 Destroyer
           } GX60 3BE
           } GX60 Hitman Edition
           } GX60 1AC
           } GS70 STEALTH
           } GE40 2OL
           } GE40 2OC Dragon Eyes
       - Update support for 16F4 and 1763 based MSI Notebooks:
           - added 3 more addiction FAN tables for those units.
       - Add hot key "E" - quick start MSI EC-FW Editor
       - Add ability to copy entire rows with values of either temp or fan type:
           Usage and more info:  Since there are too many values available for modification,
         depend of models [126 or 168] if all need to be edited it can take too much time.
         Therefor now you can also copy entire row of the values from the same time,
         ie: temp to temp or fan to fan. 1st two tables defines CPU & GPU fan profiles,
         which you can use as sample to spread quickly over all other tables.
         you can do this by enter 2 letters one after another,
         where the 1st one will be the source and the second one will be the target row.
         Source rows can be only any from the 1st 4, ie: a,b,c,d  while the target rows can be any row.
         Normally they has repeatable pattern, so you can config 1st 4 by your taste,
         then copy all of them over all others very quickly. And if needs any small change, fine tune,
         you can always edit any of the 126 or 168 values individually.
    Version has been updated  [ 2.71o ==> 2.72p ]:
    Changes:
         * Add support for 670MX
         * Add support for 675MX
            Features supported for 670MX and 675MX:
             Support voltage adjust for P0, P5, P8
             Support memory clock adjust for P0, P5, P8
             Support Maximum Boost Frequency adjust
             Support Boost table Frequency adjust
             Support Essential Domain 1 Frequency adjust
             Support Essential Domain 2 Frequency adjust
             Support Essential Domain 3 Frequency adjust
             Support Software GPU core OC Limit removal
         * Update EC Tuner:
             - Add support for GT70 Barabone [1763]
             - Add support for GT60 Barabone [16F3]
             - Add support for msi's special T16 & T17 EC's for 1762 & 16F3
         * Fix cosmetic issue, when saving image on exit it blink for second
         * Update GTX 780M:
           - Add support for P-State Terminator [ability to Disable/Enable desired P-state]
    Version has been updated  [ 2.72p ==> 2.73r ]:
    Changes:
    * Update GTX 780 Ti: Add support for new vbios type
    Version has been updated  [ 2.73r ==> 2.74s ]:
    Changes:
    * Add support for 750M
            Features supported:
             Support voltage adjust for P0, P5, P8
             Support memory clock adjust for P0, P5, P8
             Support Maximum Boost Frequency adjust
             Support Boost table Frequency adjust
             Support Essential Domain 1 Frequency adjust
             Support Essential Domain 2 Frequency adjust
             Support Essential Domain 3 Frequency adjust
             Support Software GPU core OC Limit removal
             Support GPU Boost logic Enable/Disable
    Version has been updated  [ 2.74s ==> 2.75t ]:
    Changes:
      * Update: GTX 670MX:
         - Add support for new vbios type 
         - Add support Software Voltage control [On/Off]
         - Add support Software Voltage definition and adjustment
      * Update: GTX 770:
         - Add support for new vbios type
      * Update MSI EC-FW Editor:
         - Add support for new units:
            +GE70 2PE Apache Pro
            +GE70 2PC Apache
            +GE60 2PE Apache
            +GE60 2PC Apache
            +GP70 2PE Leopard
            +GP60 2PE Leopard
            +GT70 2PE Dominator Pro
            +GT70 2PC Dominator
            +GT60 2PE Dominator Pro
            +GT60 2PC Dominator
            +GT60 2PE Dominator 3K Edition
            +GT60 2PC Dominator 3K Edition
            +GS70 2PE Stealth Pro
    Version has been updated  [ 2.75t ==> 2.76u ]:
    Changes:
      * Update: GTX 675MX:
         - Add support Software Voltage control [On/Off]
         - Add support Software Voltage definition and adjustment
      * Update: GTX 765M: Add support for new vbios type
      * Update MSI EC-FW Editor:
         - Fix some garbage characters for Chinese language OS [cosmetic issue]
         - Add support for new units:
             +GS70 Barabone
             +GS60 2PC Ghost
             +GS60 2PC Ghost 3K Edition
             +GS70 2PC Stealth
    Version has been updated  [ 2.76u ==> 2.77v ]:
    Changes:
      * Add support GTX 860M (Maxwell based 860M are not supported)
       -Support voltage adjust for  P0, P1,P5, P8
       -Support higher clock's voltage adjust
       -Support memory clock adjust for P0, P1, P5, P8
       -Support Maximum Boost Frequency adjust [Auto adjust for P0, P1]
       -Support Boost table Frequency adjust
       -Support Essential Domain 1 Frequency adjust
       -Support Essential Domain 2 Frequency adjust
       -Support Essential Domain 3 Frequency adjust
       -Support Software GPU core OC Limit removal
       -Support GPU Boost logic Enable/Disable
       -Support P-State Terminator [ability to Disable/Enable desired P-state(P0,P1,P5,P8)]
    Version has been updated  [ 2.77v ==> 2.79x ]:
    Changes:
      * Add support for GTX 870M, supported features:
       -Support voltage adjust for  P0, P1,P5, P8
       -Support higher clock's voltage adjust
       -Support memory clock adjust for P0, P1, P5, P8
       -Support Maximum Boost Frequency adjust [Auto adjust for P0, P1]
       -Support Boost table Frequency adjust
       -Support Essential Domain 1 Frequency adjust
       -Support Essential Domain 2 Frequency adjust
       -Support Essential Domain 3 Frequency adjust
       -Support Software GPU core OC Limit removal
       -Support GPU Boost logic Enable/Disable
       -Support P-State Terminator [ability to Disable/Enable desired P-state(P0,P1,P5,P8)]
     * Update GTX 670MX: Add support for new vbios type
    Version has been updated  [ 2.79x ==> 2.80y ]:
    Changes:
     * Update GTX 870M: Add support for new vbios types +2
     * Fix cosmetic issue GTX 870M voltage thread, bar appear over some values
     * Update tool to showup in dialog as supported units 1763 for SB353x, .7xx versions
    Version has been updated  [ 2.80y ==> 2.81z ]:
    Changes:
     * Update GTX 460M: Add support for new vbios types +2
     * Update GTX 870M: Add support for new vbios types
     * Update GTX 780M: Improve boost table system to handle some special cases
     * Update MSI EC-FW Editor: Add new feature:
         - Allow Temp Threshold Hysteresis modification CPU/GPU, available for all supported MSI Notebooks
    Version has been updated  [ 2.81z ==> 2.82a ]:
    Changes:
    * Fix false possitive detections with some AVs
     * Update MSI EC-FW Editor:
         - Fix text max Threshold Hysteresis limit up to 10 instead of 15
         - Add support for GT70 Barabone [1762]
         - Add support for GT70 Medion Eraser X7821 [1762]
    Version has been updated  [ 2.82a ==> 2.83b ]:
    Changes:
    Update GTX750M:
       - Add support for new vbios type
    Update GTX860M:
       - Add support for new vbios type
       - Add dynamic boost table detection and adjustment
    Update GTX870M:
       - Add support for new vbios type
       - Update voltage identifier to improve compatibility
    Update MSI EC-FW Editor:
       - Add support for iBuypower Valkyrie CZ-27 [1762]
       - Update 16FK to add filter support for .7xx versions
       - Improve worker performance after initial loading
    Version has been updated  [ 2.83b ==> 2.84c ]:
    Changes:
    * Fixed bug: power below 66W cannot adjust
    Update GTX750M:
       - Allow Higher clock's Voltage modification
    Update GTX870M:
       - Add support for new vbios type
       - Add support for power control modifications
    Update GTX860M:
       - Add support for power control modifications
    Version has been updated  [ 2.84c ==> 2.85d ]:
    Changes:
    * Extend power range selection to 3kW
    Update GTX780Ti:
       - Add support for new vbios type
       - Update max boost system
    Update GTX860M:
       - Add support for new vbios type
    Update MSI EC-FW Editor:
       - Add support for GT72 2PC DOMINATOR
       - Add support for GT72 2PE DOMINATOR PRO
    * Fixed update issue introduced with version 2.84c: not always can detect new version
      [those who have troubles updating to 2.85d, install older version to perform the update,
       those who has 2.84c only, email me directly for manual update to the latest one fixed version 2.85d]
    Version has been updated  [ 2.85d ==> 2.86e ]:
    Changes:
      * Add support for GTX 880M, supported features:
       -Support voltage adjust for  P0, P1,P5, P8
       -Support higher clock's voltage adjust
       -Support memory clock adjust for P0, P1, P5, P8
       -Support Maximum Boost Frequency adjust [Auto adjust for P0, P1]
       -Support Boost table Frequency adjust
       -Support Essential Domain 1 Frequency adjust
       -Support Essential Domain 2 Frequency adjust
       -Support Essential Domain 3 Frequency adjust
       -Support Software GPU core OC Limit removal
       -Support GPU Boost logic Enable/Disable
       -Support P-State Terminator [ability to Disable/Enable desired P-state(P0,P1,P5,P8)]
       -Support for power control modifications
    Update GTX770:
       - Add support for new vbios type
    Update MSI EC-FW Editor:
       - Add support for WT70-2OK GT60-2OK WORKSTATION 3K IPS EDITION
       - Add support for WT70-2OK
       - Add support for WT70-2OL
       - Add support for WT60-2OK 3K IPS EDITION
       - Add support for WT60-2OJ
       - Add support for WS60 2OJ (3K IPS EDITION)
       - Add support for WS60 2OJ
    Version has been updated  [ 2.86e ==> 2.87f ]:
    Changes:
     * Update GTX770:
       - Add support for new vbios type
     * Update GTX880M:
       - Add support for new vbios type
     * Modify updater to fix AVG's issue
     * Update 460M:
       - Fixed issue, type6 read error in status report
     * Update GTX660Ti:
       - Fixed issue, type3 cannot save image issue
    Version has been updated  [ 2.87f ==> 2.88g ]:
    Changes:
    Update MSI EC-FW Editor:
       - Add support for GS60 2QE GHOST PRO 3K
       - Add support for GS60 2QE GHOST PRO
       - Add support for GT72 2QD Dominator
       - Add support for GT72 2QE Dominator Pro
       - Add support for GS70 2QE STEALTH PRO
       - Add support for GS70 2QE STEALTH PRO RED EDITION
    Version has been updated  [ 2.88g ==> 2.89h ]:
    Changes:
     * Update GTX860M:
       - Add support for new vbios type
    Version has been updated  [ 2.89h ==> 2.90i ]:
    Changes:
    * Update MSI EC-FW Editor:
       - Add support for GE60 Barabone [MS-16GC based]
    * Update GTX760M:  - Add support for new vbios type
    * Update GTX680:    - Add support for new vbios type
    * Add support for K3000M, supported features:
        -Support voltage adjust for P0,P5, P8
        -Support memory clock adjust for P0, P5, P8
        -Support Maximum Boost Frequency adjust
        -Support Boost table Frequency adjust
        -Support Essential Domain 1 Frequency adjust
        -Support Essential Domain 2 Frequency adjust
        -Support Essential Domain 3 Frequency adjust
        -Support Software GPU core OC Limit removal
        -Support GPU Boost logic Enable/Disable
        -Support P-State Terminator [ability to Disable/Enable desired P-state(P0,P5,P8)]
    * Modify updater: Replace update servers with new one  [existing owners need to email me to update to this version 2.90i]
    Version has been updated  [ 2.90i ==> 2.91j ]:
    Changes:
    * Update GTX670: - Add support for new vbios type
    * Update MSI EC-FW Editor:
       - Extend FAN % range to 120 to handle some private cases
       - Updated EC Core system to support newest EC generation
       - Add support for GT70 Medion [MS-1763 based]
       - Add support for GS30 2M Shadow
       - Add support for GE62 2QE APACHE
       - Add support for GE62 2QF APACHE PRO
       - Add support for GT80 2QE TITAN SLI
    Version has been updated  [ 2.91j ==> 2.92k ]:
    Changes:
    : Update MSI EC-FW Editor:
       * Add formal support(those are already supported,but wasn't listed officially as supported) for:
          - GT80 2QD Titan SLI
          - GT72 DOMINATOR DRAGON EDITION
          - GT72 DOMINATOR PRO DRAGON EDITION
          - GT60 2QD DOMINATOR 3K EDITION
          - GT60 2QD DOMINATOR
          - GT70 2QD DOMINATOR
          - GT60 2QE DOMINATOR PRO 4K EDITION
          - GT60 2QD DOMINATOR 4K EDITION
          - GS70 2QE STEALTH PRO SILVER EDITION
          - GS60 2QE GHOST PRO 4K GOLD EDITION
          - GS60 2QE GHOST PRO 4K
          - GS70 2QD STEALTH
          - GS60 2QD GHOST
          - GE60 2PL APACHE
          - GE70 2PL APACHE
          - GE40 2PC DRAGON EYES
          - GE60 2PF APACHE PRO
          - GE60 2PG APACHE
       * Add support for:
          - S20 SLIDER 2
          - GE72 2QE APACHE
          - S20
          - S30
          - S12T
       * Extend temp hysteresis value range to 20
    : Update some outdated .asm modules to avoid and reduce false detection by some AVs,
    and contacted some AV vendors to fix their false detection and to gain their approval to add some of the modules in their white-list.
    Tested with:
         -Symantec/Norton  √
         -AVG 2015 √
         -Avast! 2015   √
         -Nod32   √
         -Microsoft Security Essential

  • Re: MSI Z87-G43 Mobo No rear pannel sound

    Hi, i have gs60 2pl with gtx850m (ddr3) memory.
    When i try to overclock videocard max overclock on core is 135MHZ and max overlock on memory is 200MHZ. If i overclock higher memory, i will have &#39;artifacts&#39; ingame.
    vbios is standart, max temp on videoc...

    I can&#39;t help you. No one here can if you don&#39;t follow >>Posting Guide<< (yes, that&#39;s a link). We don&#39;t know what motherboard we talk about.... 

  • MSI GS60 Ghost Pro Golden Edition - A Combination of Stylish and High Performance.

     I have no idea who can say no to this shining and charming beauty....
    The BackStory
        When I studied at graduate school, I bought my first laptop, Asus F3J, of my life and brought it to school everyday. Actually it was a 2.9kg around laptop for gaming and I felt like carry a heavy brick. It was quite inconvient and kind of suffer for a person like me who was not doing fitness. After I graduated from school and was being a member of society, I decided to find a  laptop that was much lighter and easier to bright to work. Toshiba R830 was what I chose, but this time, the performance of playing some hardcore game wasn’t good enough since it doesn’t have a discrete graphics card.
    I started to believe there is a trade off between perforamnce and weight of laptop with these two experience. Until one day, I came across with MSI GS60 Ghost Pro at Computex 2014, it was a notebook weigh just around 2kg and uncompromising with high performance. In more detail, It had core I7 CPU、High-end GTX graphics card and two 256MB SSD within it. From that day, I know it is the notebook am looking for, it is a note book I can bring to work and also play game at home. Furthermore, MSI is going to issue the limited Golden edition of it around the end of year, it gave me one more reason to buy this “good stuff”, because both me and my girl think gold is the most fashion color in recent year, just like iphone. So that is the backstory, now i just have the golden one and is going to unbox it for you.
    The Main Specification
    MSI GS60 Ghost Pro 2QE Golden Edition:
    •   CPU: Core i7-4710HQ (2.5GHz – 3.5GHz)
    •   OS: Windows 8.1
    •   Display: 15.6″ WQHD+, IPS (2880*1620)
    •   Memory Supplied: 16G 2*8GB DDR3L 1600
    •   Graphics: NVIDIA GeForce GTX970M GDDR5 3GB
    •   Storage: 2 x 256GB M.2 SSD + 1TB 7200RPM HDD
    •   Wireless Lan: Killer 802.11 a/c
    The Unboxing
    It is a really big one, please do drive your car while buying this NB from the shop.
    Inside the main brown shipping box, there are MSI stylish back bag and the a black branded carry case.
    The back back is grey color with good material quality, it also a simple and fashion design which is suitable for young or stylish worker. The sense of touch is also good.
    There are several layers inside the bag, even more, a shock-absorbing laptop sleeve in it. What a surprise!!
    In the big black branded carry case. There are two black box, one is for accessory. One is for the main role “GS60” with sponge to protect it as you can see in the photo.
    Let see the accessory box first, a MSI gaming mouse、a MSI/SteelSeries Flux headset、a keyboard protector and a mouse pad.
    The mouse has red light shining on both side when it connect to the laptop. It’s really a gaiming stuff! We can also see the double braided cord that improved the durability.
    As “+” and “-“ these buttons in the middle of the mouse, user can adjust the sensity of the mouse instantly by these two bottons in the game. No need to waste your time finding the adjument UI within the game. It is such a good benefit for a gamer.
    The Flux headset has ear cushions with mesh-cloth material it let you feel comfortable when wear it. You also can find out the color of the shell beside the headset can be changed, one pair is MSI design in red color, the other one is pure black one.
    It also has a convenient design that the earmuff can be folded, in order to make the headset into a plat one and easy to put in your bag.
    The performance of the headset is high-end and highs that don’t get brittle. About the deep bass, it also quite stunning. Overall, it can make the music carry listener’s heart.
    It deserves you to put it on the top of your gaming headset list.
    Here we open another black box, the GS60 is packaging by the non-woven cloth.
    There are also the power adaptor、power cord and mini displayport to D-sub cable.
    By the way, the power adapter is 25.53 mm thick and 0.52kg. weigh, 19.5V and 7.7A output.
    Moreover, there are instruction manuals、several driver CDs and even two military dog tag with MSI logo, actually I am not a military lover, so I am going to use them as a key ring but not to hang on my neck.
    Finally, let us see a royal-like GS60 Ghost Pro Golden…
    Using Mg-Li alloy as the material, its chasis gains the advantage of both ultra-light and solid.
    According to MSI official website, the idea of design comes from the stealth fighter, so it shows dynamic streamline in its design. Beside the visual effect, it makes you feel comfortable when typing due to the slimmer front edge and solid palm rest. The high gloss finish and bright gold will reflect light, so it change color slightly in different lighting condition. Overall, it delivery supreme visual treat.
    To see a more apparent golden color, I put it on my sofa with yellow background.
    Shinging and charming….
    The fancy muscle curve and hire line surface make it elegant and gorgeous.  
    The shield and the MSI logo, they are delicated design without roughness.
    The black color keycap contrast with the golden chasis apparently.
    The touchpad looks cool as well, the material it made let the surface being anti-skidding and you wont leave your fingerprint on it.
    It has Dynaudio speaker and Steelseries keyboard these two famous brand as it high-end equipment. 4 channel speakers and comfortable tactile keyboard. Moreover, the Graphics card it equiped is GTX 970M,
    One of the lastest high-end Nvidia GTX graphics card. It is the first gaming notebook to equip GTX 970M .No doubt MSI regard themselves as the leader brand of gaming.
    Sound Blaster Cinema 2+Dyanudio, Bravo~~
    Let’s check the connectivity of this beauty.
    No ports but seried of cooling vents at the rear panel,in order to let air flow and palm rest feeling.
    being better.
    The left side of it located the microphone (line out) and headphone (line in) jack, two USB 3.0 ports, the power connector socket and a security port. Also the vent close to the rear panel. The metal golden jack can isolate much more noice and enhance the reality of music as not being distortion.
    The right side of GS60 located an USB 3.0 port, card reader, Mini DisplayPort, HDMI port, and GB LAN (RJ45). GS60 Ghost Pro can support 2 external moniotr with mini display and HDMI port. When playing PRG game, you can use the main one to play game, the other one can show a walkthrough. The last one, you can even use skype or outlook to connect others.
    The front side you can see the LED to show some fuction status. Such as the battary status and bloothtooth has been turned on or not..etc.
    From bottom of this notebook you can see the battery is not removable, I guess the idea probably come from iphone. In fact, I seldomly remove the battery when I using a laptop, unless it really heavy to carry. But this time, GS60 is not heavy, so it wont be a problem to me.
    I used the scaler to measure the actual weight and ruler to see how thin it is, the result cames out 19.95mm thin and 2.1kg weight. Is it really a gaming machine I used to think of?! Such an ultra-book style.
    As I know, all the gaming notebook used to be black and silver color, there are few gaming notebook with others color. MSI this time has find its way to make a breakthrough. Of course, the creative thinking and the adventurous action is what we need in gaming world!!  
    In a word, as you can see from the picture above ,the metallic feel of it is so attractive!!It is the most stylish and creative gaming notebook I have ever seen.
    All of above are the unboxing of hardware part.let’ talk about some function and feature of this treasure.
    Dragan Gaming Center which is preinstalled in this MSI laptop. With this application, you can monitor the status of the important elements in the system. You can also quick start a game or an utility through it.
    Fn+F7="Shift", according to the official website, the key can be used to change the mode of the notebook in 3 status, the default "Sport"mode、"Comfort" mode and "Green mode", it is a adjustment function to control the CPU and GPU workload in order to balance the performance and temperature
    Use "Shift" to switch the mode you prefer.
    Green- System locks both GPU and CPU chip temp.
    Comfort- System locks GPU chip temp and dynamic adjusts the GPU chip temp
    Sport- Defaut and without any control.
    I am not afraid about the high temperature and noise from fans, so I like to use the default one, Sport mode~
    If you are playing a game in the library, please do choose Green mode to keep the fan from being busy.
    The "Shift" is MSI exclusive function, the idea comes from the shifting gear in automobile.
    Here comes another interesting feature, which is called Killer Double Shot Pro.With this function,
    the GB LAN and Wireless LAN act like combined togather and user can acquire the bandwith from both.
    Killer Netwok Manager UI
    This network technology also offers you a smooth background when playing game, because you can set the gaming applications as higher priority to use the bandwith than others. What a bravo feature!!
    The highest resolution of GS60 Ghost Pro is 2880*1620 which is also called 3K,
    as you can see from the screenshot below, when playing game you gain much more visual delight.
    With the HDMI and mini display output, you can enjoy a 1+2 matrix display function.
    With the XSplit Gamecaster preintalled in GS60, you can share your game just in time through live streaming while playing it. however, I won't use this function because I don't wanna share my skill to the others, hahaha~~
    The Steal Series Engine, it is my favorite. You can set the keypress macro、text macro or lauch application just in one key. For example, while playing Leaque of Legend, we always need to press Q、W、E、R、T
    immediately, but with keypress macro function, you can trigger them just in one key. Quite convient, isn't it?
    You can also choose the color you want for the keyboard backlit with Steal Series Egine. This function shows the gaming feature indeed.  
    That's see the multi-color backlit of it. What a show off!!!
    Below is the hardware information showed by Nvidia Experience UI and GPU Z
    GeForce GTX 970M with DDR5 3G and I7-4710HQ!!
    I can't wait to see the 3D MARK 11 P score...
    Here it got P9272 at sport mode. Outstanding!!
    For 3D MARK Fire Strike, it got 6515 at sport mode. I have to say that GS60 Ghost Pro punches above its weight.
    The result of Valley Benchmark 1.0 is below, score 1560 and FPS is 37.3.
    Testing the Call of duty Ghost with FRAPS, while play the game, it goes smoothly and the fps showed at top-left is around 100~200. As you can see the delicated scenery and character there, it seems like act in the reality.
    The sequencial read of these two SSD is 1022MB/s, it features from the Super RAID technology. Applying the RAID 0 technical usually used in server into SSD to make the IOPS much better.
    Take a look at its outward appearance again, bring it oudoor to see its color under natural light.
    Fantastic~~
    I would like to say, the GS60 Ghost Pro Golden is Lamborghini in gaming laptop!! It will be all the rage.

    This year, GTX970M performance is even better than 880M, with GS60's slim design, I can only say the advance of technology is so amazing!!!

  • GS60 Ghost Pro Unboxing! With ga-young kim

    Hello, I am Kim, Ga Young aka Aphrodite, a progamer of team Startale.
    Today I will introduce a special laptop from MSI. Recently I was in need of a lighter and thinner laptop since I had to go out more often. So I purchased a laptop and went straight to the Startale team house to check it out. Fortunately Life, who is a Starcraft2 world champion, was at the house, so I hurried back. I wanted to show off my laptop. Hehe~
    As soon as I arrived, I opened the box together with Life. The package of the laptop was really pretty and luxurious and was completely different from other laptop boxes. Even Life seemed a bit surprised.
    When I opened up to box I was really surprised. The laptop and related accessories were stored very neatly. It felt like opening a package for a luxury brand-name bag~
    Wow~ it is really thin. Even though it is a gaming laptop it is only 19mm thick and weighs only about 1.9kg~
    It is perfect to carry when going out~
    Now time for a proper game test~ I was looking forward to see how well the game runs in such a thin and light laptop~
    Wow~ as expected, MSI did not disappoint me. It was really fast and smooth.
    It is equipped with Geforce GTX860M graphic card from NVIDIA and uses Intel’s I7-4700HQ CPU as its basis. Also it is equipped with a proud product of MSI called Super RAID, which allows you to play Starcraft2 at the highest quality options without any problems and also the loading speed is exceptional~ Hooray~~
    It is not a gaming laptop just because of its fast speed~ MSI proudly presents Killer Lan, which clearly decreases the latency and allows the player to play more swiftly with more speed. This has to be a required condition for every gamer, right?
    Keyboard is also very important to gamers. GS60 Ghost is equipped with a keyboard from Steel Series, which is a gaming specialty company~ Twinkling rainbow colored LED lights are very pretty and the users can variously set the key combinations their own way through the Steel Series Engine
    Ta-da~~~ What comes across your mind, when you hear MSI? It is DYNAudio. The sound that comes out from the Audio Boost, which is the gold-plated audio jack, cannot be heard elsewhere and the speakers made by the high-end speaker manufacturers, DYNAudio, along with Sound Blaster Cinema are all proud elements of MSI.
    Nonetheless Cooler Booster2 quickly lets out heat from the laptop, allowing the users to play with the laptop for long hours without any problems~
    Now, let me introduce the Game Caster function of MSI. Users can very simply stream their gaming screen online. Just login like this~~
    Through the webcam of the laptop, users can decide to show themselves on the stream~~
    You can share it on Facebook~~
    You can watch it with your smart phone, like this~~
    It is very convenient and appealing~~ I myself use this function very often~~
    I don’t know how the day passed playing games with GS60. Size, weight, design, performance and many special functions provided only by MSI! Today I fell in love with GS60 Ghost.
    Top Player Top Choice MSI GS60 Ghost!
    I highly recommend it to everyone with confidence!

    WOW~~ GS60 Ghost have good performance and very slim.. game caster function is interesting...goodbye Macbook~~

  • GS60 2QE GHOST PRO GOLD EDITION - SOUND ISSUE

    Hi,
    I have buy a new Notebook : GS60 2QE GHOST PRO GOLD EDITION.
    On your support website, I can see we can update the bios, so I have do it. But now I don't have sound anymore (on my both system Window - Linux)
    The audoi driver have been updated too. But no change...
    I can retry to update the bios. But please could you give me a solution?
    My system information:
    System Information
    Serial Number:                9S716H515427ZF1000008
    Product Name:                 GS60 2QE
    OS:                           Microsoft Windows 8.1 64 bits
    Windows Product Key:          XP9F3
    HDI Build:                    ZS7-16H5BM4-DS1   3.2.A14.8.0.1 
    BIOS Version:                 E16H5IMS.10D
    BIOS Release Date:            2014/12/19
    EC Version:                   16H5EMS1 Ver5.04, 09/24/2014
    CPU:                          Intel(R) Core(TM) i7-4720HQ CPU @ 2.60GHz
    Memory:                       16 GB @ 800 MHz
                                   - 8192 MB, DDR3-1600, Kingston MSI16D3LS1MNG/8G 
                                   - 8192 MB, DDR3-1600, Kingston MSI16D3LS1MNG/8G 
    Graphics:                     Intel(R) HD Graphics 4600, 2080 MB
    Graphics:                     NVIDIA GeForce GTX 970M, 3072 MB
    VBIOS Version:                84.04.26.00.13
    Drive:                        SSD, KINGSTON SM2280S3120G, 111,79 GB
    Drive:                        HDD, HGST HTS721010A9E630, 931,51 GB
    Drive:                        HDD, WD My Passport 0748, 931,48 GB
    Drive:                        SSD, TOSHIBA THNSNJ128G8NU, 119,24 GB
    Network:                      Bluetooth Device (Personal Area Network)
    Network:                      Killer Wireless-n/a/ac 1525 Wireless Network Adapter
    Network:                      Killer e2200 Gigabit Ethernet Controller (NDIS 6.30)
    Programs and Features
    KB9X Radio Switch Driver , 1.1.0.0
    ETDWare PS/2-X64 11.13.7.5_WHQL , 11.13.7.5
    SteelSeries Engine , 2.8.450.22786
    Microsoft Visual C++ 2010  x64 Redistributable - 10.0.40219 , 10.0.40219
    Intel(R) Rapid Storage Technology , 12.9.0.1001
    MAGIX MX Suite , 1.13.0.121
    Qualcomm Atheros Network Manager , 1.1.46.1056
    Qualcomm Atheros Killer E220x Drivers , 1.1.46.1056
    Qualcomm Atheros 61x4 Bluetooth Suite (64) , 3.0.0.357
    Microsoft Visual C++ 2005 Redistributable (x64) , 8.0.59192
    Microsoft Application Error Reporting , 12.0.6015.5000
    Panneau de configuration NVIDIA 347.88 , 347.88
    NVIDIA Pilote graphique 347.88 , 347.88
    NVIDIA GeForce Experience 2.1.2 , 2.1.2
    NVIDIA Optimus Update 16.13.21 , 16.13.21
    NVIDIA PhysX System Software 9.14.0702 , 9.14.0702
    NVIDIA Update 16.13.21 , 16.13.21
    NVIDIA LED Visualizer 1.0 , 1.0
    SHIELD Streaming , 3.1.200
    NVIDIA GeForce Experience Service , 16.13.21
    NVIDIA Install Application , 2.1002.173.1392
    NVIDIA Network Service , 2.0
    NVIDIA ShadowPlay 16.13.21 , 16.13.21
    SHIELD Wireless Controller Driver , 16.13.21
    NVIDIA Update Core , 16.13.21
    NVIDIA Virtual Audio 1.2.25 , 1.2.25
    Intel® Trusted Connect Service Client , 1.31.8.1
    Qualcomm Atheros 11AC Drivers , 1.1.46.1056
    Qualcomm Atheros Bandwidth Control Filter Driver , 1.1.46.1056
    WinZip 17.5 , 17.5.10562
    MSVCRT110_amd64 , 16.4.1109.0912
    SCM , 13.014.09014
    Google Chrome , 41.0.2272.101
    MSI Remind Manager , 1.0.1408.1401
    Dragon Gaming Center , 1.0.1409.1501
    Norton Online Backup , 4.5.0.9
    Norton Anti-Theft , 1.10.0.9
    Norton Internet Security , 21.7.0.11
    VLC media player , 2.2.0
    Photo Common , 16.4.3522.0110
    Windows Live , 16.4.3522.0110
    Fotoattēlu galerija , 16.4.3522.0110
    Movie Maker , 16.4.3522.0110
    Фотогалерия , 16.4.3522.0110
    Raccolta foto , 16.4.3522.0110
    Windows Live Essentials , 16.4.3522.0110
    Photo Gallery , 16.4.3522.0110
    Фотоколекція , 16.4.3522.0110
    „Windows Live Essentials“ , 16.4.3522.0110
    Fotogalleriet , 16.4.3522.0110
    Ciel Auto-entrepreneur Standard 6.1 , 20.00.610
    Windows Live UX Platform Language Pack , 16.4.3522.0110
    Galeria fotografii , 16.4.3522.0110
    BurnRecovery , 4.0.1408.201
    Valokuvavalikoima , 16.4.3522.0110
    Foto-galerija , 16.4.3522.0110
    Fotogalerija , 16.4.3522.0110
    Windows Liven peruspaketti , 16.4.3522.0110
    League of Legends , 3.0.1
    Windows Live Installer , 16.4.3522.0110
    Galerie de photos , 16.4.3522.0110
    XSplit Gamecaster , 1.8.1406.0912
    Fotogaléria , 16.4.3522.0110
    Συλλογή φωτογραφιών , 16.4.3522.0110
    Fotogalerie , 16.4.3522.0110
    Windows Live PIMT Platform , 16.4.3522.0110
    Galeria de Fotos , 16.4.3522.0110
    Galería de fotos , 16.4.3522.0110
    Realtek Card Reader , 6.3.9600.21249
    Fotoğraf Galerisi , 16.4.3522.0110
    Google Update Helper , 1.3.26.9
    Battery Calibration , 1.0.1405.0701
    Intel(R) Management Engine Components , 9.5.23.1766
    Galerija fotografija , 16.4.3522.0110
    MSI Social Media Collection , 1.14.2251
    SUPER CHARGER , 1.2.024
    Microsoft Visual C++ 2005 Redistributable , 8.0.59193
    MSVCRT , 15.4.2862.0708
    MSVCRT110 , 16.4.1108.0727
    Windows Live SOXE Definitions , 16.4.3522.0110
    Microsoft Office , 15.0.4569.1506
    Windows Live UX Platform , 16.4.3522.0110
    Windows Live Photo Common , 16.4.3522.0110
    Fotogalleri , 16.4.3522.0110
    Windows Live Communications Platform , 16.4.3522.0110
    Boot Configure , 20.014.05233
    NVIDIA PhysX , 9.14.0702
    Sound Blaster Cinema 2 , 1.00.05
    גלריית התמונות , 16.4.3522.0110
    Galerie foto , 16.4.3522.0110
    Fotogalerii , 16.4.3522.0110
    Основные компоненты Windows Live , 16.4.3522.0110
    Основи Windows Live , 16.4.3522.0110
    Windows Live SOXE , 16.4.3522.0110
    Фотографии (общедоступная версия) , 16.4.3522.0110
    D3DX10 , 15.4.2368.0902
    Fotótár , 16.4.3522.0110
    Qualcomm Atheros Killer Performance Suite , 1.1.46.1056
    Galeria de Fotografias , 16.4.3522.0110
    Фотоальбом , 16.4.3522.0110
    Microsoft SQL Server 2005 Compact Edition [ENU] , 3.1.0000
    Microsoft Visual C++ 2010  x86 Redistributable - 10.0.40219 , 10.0.40219
    Intel(R) Processor Graphics , 10.18.10.3496
    Realtek High Definition Audio Driver , 6.0.1.7318
    Windows Live Temel Parçalar , 16.4.3522.0110
    Podstawowe programy Windows Live , 16.4.3522.0110
    OS Activation
    Nomÿ: Windows(R), Core edition
    Description : Windows(R) Operating System, OEM_DM channel
    Cl‚ de produit partielleÿ: XP9F3
    tat de la licenceÿ: avec licence
    Thank
    Link where come from the bios file update
    msi.com/support/nb/GS60-2QE-Ghost-Pro-Gold-Edition.html#down-bios&Win8.1 64

    I have forgot too to precise, I have update the bios with your (msi) bios file because the fan cooling wasn't working correctly and the laptop was very hot. Now, it's much better, but NO SOUND :-(.
    Please help me!

  • GS60 2PE Ghost Pro - Windows install

    Hi,
    I've recently bought a GS60 2PE Ghost pro which come with a SDD and a HDD with Windows 8.1 installed.
    I would like to do 2 things and would like to know the best way to do it :
    - Moving windows onto HDD
    - having Ubuntu 14.10 on SSD (this will be my main OS)
    I prefer Windows 7 over Windows 8 but I don't have any licence for Windows 7. Is it legit to downgrade to a Windows 7 ?
    If I use Windows 7, I think I would have to reinstall completely so I just need to directly install on HDD. However I'm not very familiar with UEFI and I don't know what should be looked at.
    If I use Windows 8, I would like to clone the SSD partitions to the HDD, or, if possible, directly install windows 8 on the hdd using the recovery functions.
    What would be the best way to do that ?

    Quote from: msi on 12-January-15, 16:56:12
    Hi,
    I've recently bought a GS60 2PE Ghost pro which come with a SDD and a HDD with Windows 8.1 installed.
    I would like to do 2 things and would like to know the best way to do it :
    - Moving windows onto HDD
    - having Ubuntu 14.10 on SSD (this will be my main OS)
    I prefer Windows 7 over Windows 8 but I don't have any licence for Windows 7. Is it legit to downgrade to a Windows 7 ?
    If I use Windows 7, I think I would have to reinstall completely so I just need to directly install on HDD. However I'm not very familiar with UEFI and I don't know what should be looked at.
    If I use Windows 8, I would like to clone the SSD partitions to the HDD, or, if possible, directly install windows 8 on the hdd using the recovery functions.
    What would be the best way to do that ?
    you can't downgrade to windows 7 and you must have license to re-install your windows 8 to windows 7 so do a USB recovery first before proceeding this incase you want to re-store your laptop to factory default in future , to install windows 8 on HDD or windows 7 you can do it yes but you still need a license for windows 7.

  • Screen resolution of GS60 2PC003 Ghost gaming laptop?

    I picked up a lightly used MSI GS60 2PC003 Ghost laptop and am puzzled by the screen resolution reported by several programs: 1366x768. I also see this when I boot Linux Mint from a USB flash pen drive. The MSI specs web page says
    LCD Size 15.6" Full HD (1920x1080), Anti-glare
    so did someone swap the display? The specs page also says "The specifications may differ from areas and we keep the right to change without notice." Would the serial number help to determine which display it was assembled with?
    The seller says he bought it in the US (in Florida, I think) and brought it back to Uruguay where we both live. It's a US English lappie.
    I'm suspicious about the laptop now because the 1TB HDD is reporting a fatal error after just 8 hours of power on time.
    TIA to everyone who replies.

    The lappie has Window$ 8.1 and it's totally up to date. That's one thing the guy I bought it from did--he always kept the M$ stuff up to date.
    Every program I've tried shows the screen resolution is 1366x768. There's no higher resolution available as a choice, just lower resolutions.
    Linux runs a hell of a lot better than Window$ does on the laptop. After I make a recovery backup, I intend to replace Window$ with Linux. A live Linux CD ISO running from a USB flash pen drive shows I'm not using any proprietary drivers under Linux and that's the way I want it.
    I have a 1TB desktop HDD in a USB cabinet. Window$ doesn't see that external HDD and Linux does. There are a lot of other reasons not to use Window$; ask Ed Snowden.
    I did have to update the BIOS from 103 to 111 and install all the driver updates in the order listed on the MSI web page. Nonetheless, the touchpad works fine under Linux and terribly under Window$, no matter how I adjust the Window$ settings for the touchpad.
    I'm running DRevitalize from Hiren's Boot CD on the GS60 now to try and repair the HDD; it's going to take another day or so to finish. I've also got WinDFT from HGST, the HDD manufacturer's drive fitness test. Unfortunately, it doesn't attempt repairs like diagnostic software from some other manufacturers do. If it still fails SMART like I think it will, I'll try some disk repair stuff from Ultimate Boot CD before I buy a replacement HDD. 1TB isn't big enough for me anyway.
    The HDD failed a few days after I bought the lappie. I've attached a screenshot of diskmgmt.msc taken the day before the HDD failed. It was good then. Very strange.

  • Requesting disassembly/assembly Guide For MSI GS60 Ghost Plese

    I would like to request a disassembly /assembly guide for MSI GS60 Ghost for GPU/CPU repaste. Thanks XD

    if you just want to upgrade RAM oder SSD you don't need to full disassemble
    here is how I did it

  • Re: GS60 2QE(Ghost Pro 4K) Is anyone using this for office work / stock trading?

    I&#39;m using GS60 2PE Ghost Pro 15.6 inch with 1920x1080 for my daily work for following programs: InDesign, Illustrator, After Effects & Photoshop. Traveling to work with this machine 5 days a week and I totally happy with it. There is some negative expe...

    I&#39;m not sure if checking your RAM will affect your warranty.  So, before you do anything, contact MSI and they will be able to tell you your options.  They may even be able to guide you through some steps over the phone.
    I hope everything works out oka...

  • Where to buy msi GS60 Ghost Pro 3K?

    Where can i buy the msi GS60 Ghost pro with the 3K screen without any OS installed?

    I'm not sure they offer it without any OS installed.

  • G Sync with GS60 Ghost Pro?

    Hi everyone
    I am looking to buy a new monitor to use with my GS60 Ghost Pro. My GPU is the GTX 870m. Can somebody please tell me whether the laptop is compatible with NVIDIA's g sync technology?
    Thanks
    Phil

    Quote from: Gorefiend on 12-February-15, 17:33:35
    According to MSI customer service, the laptop does support gsync:
    Dear Customer,
    This laptop can support this function.
    Thank you and have a nice day!
    Really?!?!?!
    But from NVIDIA website, only desktop GPUs is available for this feature. 
    http://www.geforce.com/hardware/technology/g-sync/supported-gpus

  • Sharing new GS60 Ghost Pro video on youtube

    Since the new nvidia GTX970M had launched weeks ago, msi now is offering GS60 Ghost Pro to the market.
    Let's watch the youtube video and see how good it is!!

    Quote from: 我愛星巴克 on 11-December-14, 15:55:12
    this video mention all key features very clear and easily to read it, I like simply style!
    Combine all the most wanted gaming features and designed in slim shape with light weight, the GS60 Ghost Pro is no wonder the top list in user's "MUST BUY"!

  • [Solved] gs60 ghost pro triple monitor setup??

    any one try to put a display port hub on the gs60 ghost pro something like the 3d-club MST
    link: http://www.club-3d.com/index.php/products/reader.en/product/mst-hub-1-3.html
    i have a triple monitor setup for my desktop machine and i was wondering if it is possible to just plug my gs60 into a USB hub for sound, keyboard, and mouse. then a MST display port hub just dock and game. from what i read online the GTX 870M will work in this configuration i just want to know if anyone here has tried it?

    Quote from: Yippyyay;104043
    any one try to put a display port hub on the gs60 ghost pro something like the 3d-club MST
    link: http://www.club-3d.com/index.php/products/reader.en/product/mst-hub-1-3.html
    i have a triple monitor setup for my desktop machine and i was wondering if it is possible to just plug my gs60 into a USB hub for sound, keyboard, and mouse. then a MST display port hub just dock and game. from what i read online the GTX 870M will work in this configuration i just want to know if anyone here has tried it?
    Yes, it works.

  • GS60 Ghost Pro - Some parts of Steel Keyboard are not illuminated

    Hi,
    I bought myself a GS60 2PE Ghost Pro a couple of days ago. The Keyboard illumination was working fine at first, but today I noticed that some parts of my Steel Keyboard are not illuminated anymore. My laptop was updated by Windows Update Manager, so I thought it had something to do with newly installed updates. But I did a full system recovery with F3 and the keyboard is still not illuminated properly.
    Any ideas what can fix this issue?

    I have checked out the GS60 2PC (same generation as yours) and I saw what you mean.
    I didn't notice this before when I tested the GS60 models.
    When looking at the keyboard on smaller angle (<70°) you can see there is less light coming from the F1, F7, F8, F9, F11, TAB, CAPS, SHIFT, ENTER and Numpad keys.
    The amount of light that is visible below the keys isn't consistent everywhere and that seems to suggest that the keyboard back-lighting isn't working properly at those keys.
    Looking below the F7, F8, F9 keys, I see that only the top left part of the key is illuminated, while other keys (i.e. F2..F6) are also illuminated on the right part of the key.
    I have checked with our R&D department and this is a design choice.
    The F2..F6 keys have a symbol in the top-left and the bottom-right part of the key and the F1, F7..F9, F11 only have a symbol in the top-left, which doesn't require lighting in the lower right part of the key.
    This also applies to the bigger keys (TAB, CAPS, SHIFT, ENTER and Numpad keys), only the center of the key where the symbol resides is illuminated.
    When looking at the keyboard in dim/dark rooms the keyboard back-lighting works as expected and keys can easily be identified because the symbol on the key lights up.
    I hope the attached pictures clarify the situation (It isn't easy to capture the real effect with a simple digital camera. The situation in the pictures actually look worse than viewing it in real life).
    P.S.,
    More pictures and a video in the attached Zip file.
    The video might show the situation the best.

Maybe you are looking for

  • Extracting values from multi select check boxes delimeted by ":"

    A set of check boxes in an Apex form produces "V1:V2:V3" in the target field, these are the key fields from a dynamic selection lists based on a table that contains the key and value fields. Does anyone have a sample SQL fragment that will produce a

  • How to create a shopping cart in JSP?

    I am creating an online product ordering system, How can i create a shopping cart in jsp? is there a way i can save a table containg itemcode, price, quantity in jsp? Can i save it using bean or session? please help me. thanks in advance.

  • Where does Jre Installs

    Hello everybody ! Where or should I put it correctly how does the Jre installs it self in windows enviroment ? I guessed sun uses the folder Java as default and then make some changes in the Windows Registry. Is this folder always going to be java as

  • Messed up activiation

    When i started activating my phone, I set up the account as if I was a new user which i wasnt supposed to do, because i already have an AT&T line set for the iphone....now its telling me my phone is processing activation....is there anyway to reset m

  • Restore after soft reset not working

    I'm hating my 5800 more and more by the day. I just did a soft reset in order to overcome the 'voice system error'. Then I did a restore of all the contacts, calender etc. What did it restore? NOTHING! Now what am I supposed to do?! Thanks again noki