Ghost Icons on the Screen
TOUCHSMART 610 - w/ Windows Home 7.
When opening a document, the menu choice (ie: "Move Here" "Open", etc) imprints on the screen. It remains frozen in place, cannot be deleted, only disappears after rebooting the system. Then, any similar action creates the same problem. Any ideas?
Hi KFBKB,
When did this first occur? Did you install any third party software immediately prior to this symptom?
You are having some type of problem with a right-click menu context handler in Windows Explorer.
Can you refresh the desktop and clear the ghost menu item when this happens?
Try using a Microsoft System Restore point created prior to the onset of this issue.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.
Similar Messages
-
My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!
Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace -
There is no option to reject an incoming call in locked screen, there must be an icon on the screen for one who don't want to use lock button several times, i did'nt face this problem in last ios 6.1.3.
A good read. Have you done anything at all to resolve your problem. Reset? Restore?
By the way - "your products"... nobody here produced the iPhone, we are all just users. Apple is not here. -
I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine
Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W. -
when I try to drag icons accross the screen thet are sticking for up to 10 seconds. I have just done a recovery (reformatted and reinstalled the OSX 10.8.5 but no change. The activity monitor shows nothing out of the ordinary. I have a MacBook Pro 2012. I am having perfomance isues with ProTools and I'm wondering if the 2 are connected. I installes TechTools 7 and ran tests on everything and it says all is good. Any idea's? Thanks!
JimIf you haven't already done so, eject the card by dragging its icon to the Eject icon in the Dock (where the Trash icon usually is.) Make sure the write-lock switch on the card is in the unlocked position. Then reinsert the card and test.
If there's no change, and the same happens with more than one card, the card reader is stuck in write-locked mode. I don't generally advise do-it-yourself hardware repair, but one ASC member managed to fix this problem. I haven't tried the fix myself and I can't offer any guidance beyond what's in that discussion. If you cause damage, don't expect your warranty to cover it. I suggest you instead make a "Genius" appointment at an Apple Store. -
I synced my Ipod to itunes now I can only double tap the icons on the screen, it seems that the swipeing feature has somehow been disabled, Is there a way i could fix it or get it back to normal?
Hi there,
It sounds like you may have an accessibility feature called VoiceOver enabled. Take a look at the article below for more information on how to use VoiceOver as well as how to disable it.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/ht4317
-Griff W. -
Strange little bar codes appear around every icon on the screen of my imac?
strange little bar codes appear around every icon on the screen of my imac?
thankyou peoples, i believe you & think that i may have 'failed electrolytic capacitors', which is somewhat reasurring as it means that this machine is not about to explode. besides its better than kidney failure or heart failure or generally life failure. its time to upgrade anyway so i think this is a message to do so.......really appreciate your help......
-
The icon on the screen shows I have several that are ready to update, but when I go to that tab in iTunes, the screen is blank.
If you go to the App Store and go to the purchased tab you can go through all of your apps. They will either show open or update. You would have to search through all of them but you can at least still update your apps.
-
Try updating my ipad 2, pop up with error 1602 and now my ipad is stuck with the itune and USB icon on the screen. I tried to restart it, but screen still comes up the same.
See if this page helps http://support.apple.com/kb/TS3694#error1602
-
My iMac turns on the start up chime sounds, you see the apple icon on the screen and then it just shuts off. Any ideas?
Do these two resets:
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
I triued installing the itunes update on my iphone & now it has the USB connector icon on the screen & I can't use my phone. Help?
Can you please explain what happend and tell us exactly what you were doing before the mishap occured? Your ambigous post will not help us help you.
-
Hi I am using iPad 2, when I tap app icon on the screen it shakes and does not open the app please advice what need to be done
- First try clciking the Home button one and try again.
- Next reset the iPod. Nothing is lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then restore from backup
- Restore to factory defaults/new iPod -
18 month old original i-pad switches on but screen resolution not good and can only just see the icons has the screen gone?
No could just make this out and it is up full
-
the icons on the screen of my laptop are much too large. I don't know how they got that way. I want them to return to the smaller ones. I have right clicked on the desktop and clicked on making icons and other things smaller. this made the items on the bar at the bottom much smaller but did nothing for the icons all over the screen. What else can I do. I am using Windows 7 HP pavillion dv7 notebook
Hi,
Left click on an empty area of the Desktop to ensure it's the active window, then hold down the Ctrl key and use the scroll area of the Touchpad to adjust the size.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
the remote on apple tv does not work,when i turn on the tv Isee the appletv and the itune icon on the screen.
Did you do a software update?
AppleTV is unable to start properly. You need to connect to a computer running iTunes as detailed here:
Apple TV (2nd and 3rd generation): Restoring your Apple TV
Maybe you are looking for
-
Firefox tries to open but all that comes up is the Mozilla Crash Reporter and can't open past this point.
-
I am running snow leopard Mac OS X 10.6.8 (10K549) The "you must restart your computer screen" happens randomely. Here is the log from the last report and thank you for your help Interval Since Last Panic Report: 281532 sec Panics Since Last Report:
-
Xperia Ray after ICS 4.0.3
Hi! Yesterday I connected my RAY to PC companion for some backup, and notice that the new Android version 4.0.3. was available. I was expecting it, since we always like to have the latest features on our phones, so I did the update to the new version
-
How to embed a link image with pop up windows?
Does anyone have any suggestions on how to embed a link within flash movie? Once you click on it, it will pop up a new window, but I want to disable the toolbars, status bar ..., and only show the jpg image for this window. Does anyone have any sugge
-
[solved] LXDE does not start
I have installed lxde accoriding to the wiki (I was using xfce, which starts fine using the follwing configuration files, without the lines, marked by #new) and I have adopted the configuration files, but lxde does not start. I'm not using a login ma