Ghost images after deletion...

Hello – I recently deleted, on purpose, a bunch of photos in order to clean up my library. I deleted them and emptied the trash as normal and everything seemed fine. The next time I opened iPhoto, the space they occupied was there, along with the file name, but no image. HOWEVER, here is the kicker: this only happened on certain film rolls, not all of them. Any thoughts…? Thanks.

This type of problem typically occurs when someone uses the finder to tamper with the innards of the iPhoto Library folder. In you case, I can't explain it. This isn't going to be pleasant but you might need to do the "manual rebuild." Details are here:
http://docs.info.apple.com/article.html?artnum=107947

Similar Messages

  • Ghost Mailboxes After Deleted

    Sometimes when I delete a mailbox that I no longer need, the mailbox itself don't delete, instead it's color turns to white. Hence ghost like. Why is that sometimes happens?
    All of the messages and/or mailboxes have been removed from the mailbox. When the mailbox don't delete and changes color, I have to delete it again to delete it permanently.
    Thanks for the help.

    Bump - does no one else have this issue? Today it was saying "Incoming mail - Receiving 33 of 33" and nothing appeared. I'm concerned that a. I'm gettinga lot of spam and b. it's being shuffled to somewhere on my hard drive that I can't clean-up.

  • My iPhone 5 claims to have 1.81GB(211 photos) of storage taken by "Photo Library". How do I locate and delete these ghost images to free up my storage space?

    Hello. I've had my iPhone 5 for just over a year now. I just did a factory reset on it for the first time. When I look at storage usage in my iPhone settings, or when I connect my phone to iTunes, it claims that I have 211 Photos taking up 1.81GB of my storage. I'm very confused why because I've deleted every single image I can find. I deleted Twitter, Instagram, Vine, Facebook, etc., assuming that one of these apps was storing these images somewhere. After doing a full factory reset and iCloud backup(excluding photos), I still have the 1.81GB of photos that I just cannot find. I've already tried to delete them through iTunes, unfortunately to no avail. It specifically states there is 211 photos taking up the space. Can anybody help me find these ghost images before I lose my mind??

    Copying files works OK, but not moving.  It seems like recently(iOS8?), when you try to delete photos from an iPhone that has been mounted you will get a 'permission denied' error. I haven't found a way around this. 
    I've resorted do manually deleting using one-by-one selections on the iPhone itself.  Dropbox carousel is great for this but I don't use Dropbox yet.  They other way is to do an iTunes sync and then delete the synced folder contents but that just feels 'weird'. Maybe there's a good App out there for photo management.

  • Having deleted music from iPad, how do I remove the 'ghost image'?of song titles

    Having deleted music from iPad - how do I remove 'ghost image' that remains?

    In settings, go to Music and turn off "Show All Music"

  • Images kept after deletion

    IPhoto 9.5.1 will keep images even after deleted AND trash is emptied.
    I have Repaired the database, Rebuilt the Database and the images I can see in the master and thumbnail folders inside the actual library do not show up so they can be deleted.  They did at one time exist in the library, they were deleted and the trash emptied.  I am trying to find a way to have iPhoto clean itself.
    Here are suggestions I can say I reject right now.  I will not extract all the images and import to a new library.  That is stupid since faces, locations and all organization is lost.  I take RAW and adjustments will be lost or the Raw lost.  I am looking for a apple or a representative to acknowledge a serious shortcoming in the software.  None of the tools that come in iPhoto can retrieve the images nor delete the images.  I could manually do it but this is a continual issue and a real Hard disk hog when deletion does not delete the files
    Anyone found a real solution to this?

      I am looking for a apple or a representative to acknowledge a serious shortcoming in the software.  None of the tools that come in iPhoto can retrieve the images nor delete the images.
    This is a User-to-User forum, so it is unlikely, that Apple representatives will post here to acknowledge shortcomings of the software.
    But there is a well-known problem with iPhoto's trash.
    If you put too many photos into the Trash at once, the Trash cannot be emptied.
    If you put  photos into the Trash and then merge the events the photos were in with other events, they will stay in the library, even after you emptied the trash.
    If your iPhoto library is on an unsupported drive, it may not be possible to move the photos to the trash (a network volume or unsupported filesystem)
    I think, your problem is (2). You said, that our build the library. Did you see a "recovered" items event after you rebuild the library? If yes, mot of the photos, that had not been deleted, should have been collected in that event, and you can delete them from that event.
    Else try to rebuild the library with iPhotoLibrary Manager as described by Old Toad in this post:
    Re: Copying saved iphoto library from external hard drive back to Macbook Pro
    The important part is:
    make sure that in the rebuild window the checkbox  "Scavange orphaned photos" is checked.

  • My iPhone automatically recovers some deleted images after iOS update

    Some months back I deleted few images off my iPhone. I understand that photo stream was 'On'. I noticed that my iPhone was recovering the images now and then. I put 'Off' all the sharing services, photo streams etc etc still my iPhone recovers these images after an iOS update. These are some sensitive photos and I would be in big trouble if this continues.

    What exactly have you tried?
    What happens when you try those things?
    What is the exact wording of any error messages received?

  • Help - canvas doesn't match timeline -- ghost images appear

    Hi,
    After having no problem in panther and final cut 5.0 I've had to upgrade to tiger (10.4.8) and FCP 5.1.2. When I opened and edited my project, I got a sort of ghost image (a still image from elsewhere in the timeline) appearing in the canvas over where another clip should be. This happened once and I tried everything (deleting and then brining in clean copy of clip) and no dice. The good news is that when I output to QT.mov, everything looks as it should.
    But suddenly, I'm having this problelm in many areas of my project, which makes it hard to edit at all. Has anyone else had this problem? I've tried rendering everything, but it doesn't change anything.
    Two other clues:
    1) at the same time I've had trouble getting VoiceOver to recognize where i am in the timeline so have had to create "In" marker for the project at that spot where I'm doing a new voiceover.
    2) For what it is worth, there does seem to be some odd lines (same color as rendered project but as if cut into smaller pieces in the area of the timeline that triggers this).
    please help! (and thanks in advance)

    Glad to help. I'm glad to see someone else is working in NY on this cold, gray day. One thing I cannot recommend too highly; browse this forum every day. You see a topic that might be useful, read it. Pretty soon, you'll be an expert at troubleshooting fcp.

  • Persistent Ghost Images

    I wonder if anyone else has had this problem:
    You know the yellow text bubbles that appear when you hold your mouse over a link in Safari or Mail, etc.? Well, I've got these two bubbles, one from Adobe Acrobat and one from Safari, that are stuck on my screen. One is at full opacity while the second is very transparent. I've tried using expose to flash it off but it only disappears and reappears w/ the other windows. I've tried fast user switching to hopefully knock it off the screen but it rotates right along with the rest of the desktop. They are not clickable and do not move in relation to the workspace unless expose, but not spaces, is activated. Nothing short of logging out completely will remove these ghost images. What the **** is going on here? Help Steve!

    The issue is resolved!
    I updated my iPhone, iPad and iPodtouch to iOs 8.1 but didnt update to icloud drive for Windows 4 simultaneously. After updating to iOs 8.1, I tried to add some files to icloud using icloud.com website. But as I had not updated my windows PC to icloud 4, the files could not be saved on the cloud in the new format.
    The background story is that Apple has changed the "file type" completely with the introduction of iCloud Drive. The iWork documents used to be in absolutely different format before the introduction of iCloud drive. The iCloud drive doesnot recognise those old files.
    So those who have updated to iCloud drive on one device and started working using icloud on the non-updated device, have created confusion for the icloud drive folder and the apps.
    I scanned through my iCloud drive Keynote folder and found those corrupt files. I sent those files to myself in .pptx format and deleted them from the iCloud drive folder. Before this, I had updated my PC to icloud drive fro windows 4. Now there was one file on which I had worked from my iPad before updating my PC which was not getting deleted. I tried hundreds of ways to get rid of it. I moved it from one folder to another, changed its name, etc etc.... If I tried to open it, it was getting downloaded to my PC as a folder... and when I was trying to delete it, it was giving an error message... However, after Ctr Alt Del for some 100 times, it got deleted from iCloud drive folder on iCloud.com. Instantly the files started getting downloaded on all my ios devices. Instant changes visible. Instant changes visible.
    Please search for all those files on which you worked from the day of your updating to iOs 8 and release of Yosemite and remove those from the iCloud drive. The way I got rid of thsi issue, may all get rid of it.

  • How can i restore memory after deleting all photos on my iPad 8.1.2

    iPad 4
    8.1.2
    Photos; not iPhoto app
    Under GENERAL I cannot restore my capacity memory after deleting all my photos from the iPad.
    I do not store photos in the Cloud. I do not use Photo Stream
    I have reset my iPad as well as checked in Image Capture for possible photos still there.
    I have also deleted last 30 days of photos.

    In iOS 8.1.2 photos that are deleted from the Camera Roll are moved to the Recently Deleted album. They remain there for 30 days unless you delete them again from that album. The Recently Deleted album was created because so many people complained that they deleted photos and wanted them back. The Recently Deleted album gives people 30 days to change their mind about deleting photos. For the rest of us, it's kind of a pan to have to delete the photos twice to free up the storage space.
    Oh, and there is no longer an iPhoto that works on iOS devices running iOS 8.1.2.

  • Multiple errors attempting to capture a Windows 8 reference image after booting from USB (Dell Latitude 10)

    From results.xml:
    <?xml version="1.0"?>
    <Results><Errors>8</Errors><Warnings>0</Warnings><RetVal>-2147467259</RetVal><DeploymentType>CUSTOM</DeploymentType><Messages><![CDATA[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.
    Litetouch deployment failed, Return Code = -2147467259 0x80004005
    Failed to run the action: Apply Windows PE.
    Unknown error (Error: 00001550; Source: Unknown)
    The execution of the group (Capture Image) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)
    Failed to run the last action: Apply Windows PE. Execution of task sequence failed.
    Unknown error (Error: 00001550; Source: Unknown)
    Task Sequence Engine failed! Code: enExecutionFail
    Task sequence execution failed with error code 80004005
    Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]]></Messages></Results>
    I have not only regenerated my boot files while updating my deployment share, I have completely rebuilt the MDT 2012 deployment share from scratch, and I'm still getting the exact same errors. I can't figure out what is causing this. The only hits for these
    errors seemed to say that the -214... error is likely related to a missing file, but I don't know how to figure out what that might be. I don't know what the FAILURE ( 5456 ) could be caused by, either, although it seems to be related to not knowing what partition
    should be imaged or imaged to. I haven't been able to find any reference to MDT needing a partition to image from/to set in a CS.ini property or in a task variable.
    I am running a modified version of the Sysprep and Capture Task Sequence (set up as described at http://bjtechnews.org/2012/06/01/mdt-2012-capturing-a-reference-image-part-ii/, it's basically the default settings for that TS with the sysprep step disabled and
    the "Set Image Folder" task variable created per that post--I ran sysprep myself, manually, on the machine before shutting it down to boot from USB) after booting a Dell Latitude 10 tablet from a USB drive created by extracting the contents of the
    MDT 2012 DeploymentShare$\Boot\LiteTouchpe_x86.iso to a FAT32-formatted volume.

    Here is the second part of BDD.log:
    <![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[No Windows PE image to delete.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Checking mapped network drive.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Disconnecting drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Y: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up C:\MININT directory.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="21:18:44.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Not Wizard = False]LOG]!><time="00:44:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WizardComplete is now = N]LOG]!><time="00:44:07.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[ Open Control File: TaskSequences]LOG]!><time="00:44:08.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[CleanStartItems Complete]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #2" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #1, Partition #0" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE1"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives = C:]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Not Wizard = False]LOG]!><time="00:54:54.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WizardComplete is now = N]LOG]!><time="00:54:55.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[ Open Control File: TaskSequences]LOG]!><time="00:54:56.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceID is now = CAPTURE001]LOG]!><time="00:55:00.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@type='BDD_InstallOS']]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@type='BDD_InstallOS'] = False]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Task Sequence does not contain an OS and does not contain a LTIApply.wsf step, possibly a Custom Step or a Client Replace.]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[DeploymentType = CUSTOM]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageProcessor is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property OSGUID is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceName is now = Capture reference image]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceVersion is now = 1.0]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceTemplate is now = CaptureOnly.xml]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property OSGUID is now = {9c976969-ab45-405b-82e7-d8a429228a67}]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageIndex is now = 1]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageSize is now = 7934]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageFlags is now = Professional]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageBuild is now = 6.2.9200.16384]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageProcessor is now = x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageLanguage001 is now = en-US]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[InstallFromPath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86\Sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property InstallFromPath is now = \\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[SourcePath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property SourcePath is now = \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@type='BDD_InstallRoles']]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@type='BDD_InstallRoles'] = ]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']]]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']] = ]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:32.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:33.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TSGuid is now = {ed8ed1ac-ab1a-448d-97b5-0d4cb1f7ef95}]LOG]!><time="00:55:38.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property OSGUID is now = ]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property DeploymentType is now = CUSTOM]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property DoCapture is now = YES]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ComputerBackupLocation is now = \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property BackupFile is now = CAPTURE001.wim]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WizardComplete is now = Y]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Setting variable ComputerBackupLocation to value \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property ComputerBackupLocation is now = \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:46.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Setting variable ImageBuild to value 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property ImageBuild is now = 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:48.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Setting variable ImageFlags to value %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property ImageFlags is now = %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:50.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Setting variable PHASE to value STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property PHASE is now = STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:52.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[---------------- Initialization ----------------]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Found: DestinationDisk: 0]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Found: DestinationPartition: 1]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Destination Logical Drive was not specificed, defaulting to #:\]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Looking for Sysprep.inf in #:\sysprep\Sysprep.inf]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[The sysprep.inf file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Property OSDAnswerFilePathSysprep is now = ]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[The unattend.txt file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Found unattend.xml at \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml, will copy to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Copied \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Property OSDAnswerFilePath is now = C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Loaded C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for ComputerName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OrgName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for ProductKey]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinDomain]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for MachineObjectOU]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for DomainAdmin]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for InputLocale]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Language]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LanguageGroup]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for SystemLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for TimeZone]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoLogon]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoLogonCount]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for BitsPerPel]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Xresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Yresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Vrefresh]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AreaCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for CountryCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Dialing]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LongDistanceAccess]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Home_Page]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoMode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoUsers]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UpgradeData/Upgrade not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OSDComputerName]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for ProductKey]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed parent of //settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UserData/ProductKey/Key from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/ProductKey from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinDomain]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-UnattendedJoin"]/Identification/MachineObjectOU from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for DomainAdmin]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for DomainAdminDomain]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with InstallFromPath=\\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim (value was .\Operating Systems\Windows 8 Pro x86\Sources\install.wim)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/ImageInstall/OSImage/InstallFrom/MetaData[Key="/image/index"]/Value not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageIndex=1 (value was 1)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[//settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/UserAccounts/LocalAccounts not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Organization]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for BitsPerPel]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Xresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Yresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Vrefresh]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AreaCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for CountryCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Home_Page]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OrgName]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OrgName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with DestinationDisk=0 (value was 0)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with DestinationPartition=1 (value was 1)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Rewrote C:\MININT\Unattend.xml with changes]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[ZTIConfigure COMPLETED. Return Value = 0]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[ZTIConfigure processing completed successfully.]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Event 41001 sent: ZTIConfigure processing completed successfully.]LOG]!><time="00:56:05.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Will boot into Windows PE architecture x86 to match OS being deployed.]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Found: DestinationDisk: 0]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Found: DestinationPartition: 1]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="3" thread="" file="LTIApply">
    <![LOG[Event 41002 sent: FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:08.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Removing AutoAdminLogon registry entries]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[No Windows PE image to delete.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Checking mapped network drive.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Z: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Disconnecting drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up C:\MININT directory.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:56:15.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">

  • [Solved] Can't boot into Arch after deleting some partitons

    About 6 months ago I installed Arch on a machine that used to run Ubuntu. Had some trouble at the time getting to boot into Arch but somehow managed. Now eventually decided to delete the old Ubuntu partitons to free up some space using gparted. Arch partition number changed from sda12 to sda6.
    On rebooting after deleting ubuntu partitions with gparted, I got an ubuntu splash screen and a whole lot of ubuntu boot options. Somehow these were all contained in my Arch's /boot/grub/menu.lst. Arch is all on one partition and no separate boot partition (which I had with Ubuntu - maybe I haven't deleted that and this is the problem?). Will need to check that out.
    I can chroot into Arch and did the following -
    grub> find /boot/grub/stage1
    (hd0,5)
    grub> root (hd0,5)
    Filesystem type is ext2fs, partition type 0x83
    grub> setup (hd0)
    Checking if "/boot/grub/stage1" exists... yes
    Checking if "/boot/grub/stage2" exists... yes
    Checking if "/boot/grub/e2fs_stage1_5" exists... yes
    Running "embed /boot/grub/e2fs_stage1_5 (hd0)"... 16 sectors are embedded.
    succeeded
    Running "install /boot/grub/stage1 (hd0) (hd0)1+16 p (hd0,5)/boot/grub/stage2 /boot/grub/menu.lst"... succeed
    ed
    Done.
    grub>
    The Arch /boot/grub/menu.lst had a whole lot of ubuntu stuff in it but I edited to the following -
    # menu.lst - See: grub(8), info grub, update-grub(8)
    # grub-install(8), grub-floppy(8),
    # grub-md5-crypt, /usr/share/doc/grub
    # and /usr/share/doc/grub-doc/.
    ## default num
    # Set the default entry to the entry number NUM. Numbering starts from 0, and
    # the entry number 0 is the default if the command is not used.
    # You can specify 'saved' instead of a number. In this case, the default entry
    # is the entry saved with the command 'savedefault'.
    # WARNING: If you are using dmraid do not use 'savedefault' or your
    # array will desync and will not let you boot your system.
    default 0
    ## timeout sec
    # Set a timeout, in SEC seconds, before automatically booting the default entry
    # (normally the first entry defined).
    timeout 3
    ## hiddenmenu
    # Hides the menu by default (press ESC to see the menu)
    hiddenmenu
    # Pretty colours
    #color cyan/blue white/blue
    ## password ['--md5'] passwd
    # If used in the first section of a menu file, disable all interactive editing
    # control (menu entry editor and command-line) and entries protected by the
    # command 'lock'
    # e.g. password topsecret
    # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
    # password topsecret
    # examples
    # title Windows 95/98/NT/2000
    # root (hd0,0)
    # makeactive
    # chainloader +1
    # title Linux
    # root (hd0,1)
    # kernel /vmlinuz root=/dev/hda2 ro
    # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
    ## default grub root device
    ## e.g. groot=(hd0,0)
    # groot=(hd0,3)
    title Arch uuid
    #root (hd0,5)
    uuid d15cf4f9-18ca-4ec5-95bc-db0f6f264736
    kernel /boot/vmlinuz26 root=/dev/sda6 ro vga=775
    intrd /boot/kernel26.img
    title Arch hd
    root (hd0,5)
    kernel /boot/vmlinuz26 root=/dev/sda6
    intrd /boot/kernel26.img
    I have a bootinfo script which gives the following (from the chroot environment) -
    Boot Info Script 0.55 dated February 15th, 2010
    ============================= Boot Info Summary: ==============================
    => Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
    in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
    => No boot loader is installed in the MBR of /dev/sdb
    sda1: _________________________________________________________________________
    File system: swap
    Boot sector type: -
    Boot sector info:
    sda2: _________________________________________________________________________
    File system: Extended Partition
    Boot sector type: -
    Boot sector info:
    sda5: _________________________________________________________________________
    File system: ext3
    Boot sector type: -
    Boot sector info:
    Mounting failed:
    mount: /dev/sda5 already mounted or sda5 busy
    sda6: _________________________________________________________________________
    File system: ext3
    Boot sector type: -
    Boot sector info:
    Mounting failed:
    mount: /dev/sda5 already mounted or sda5 busy
    mount: /dev/sda6 already mounted or sda6 busy
    sda7: _________________________________________________________________________
    File system: ext3
    Boot sector type: -
    Boot sector info:
    Operating System:
    Boot files/dirs:
    sda3: _________________________________________________________________________
    File system: ext3
    Boot sector type: -
    Boot sector info:
    Operating System: Ubuntu 10.04.1 LTS
    Boot files/dirs: /etc/fstab
    sda4: _________________________________________________________________________
    File system: ext3
    Boot sector type: -
    Boot sector info:
    Operating System:
    Boot files/dirs: /grub/menu.lst /grub/grub.cfg /grub/core.img
    sdb1: _________________________________________________________________________
    File system: xfs
    Boot sector type: -
    Boot sector info:
    Operating System:
    Boot files/dirs:
    =========================== Drive/Partition Info: =============================
    Drive: sda ___________________ _____________________________________________________
    Disk /dev/sda: 750.2 GB, 750155292160 bytes
    255 heads, 63 sectors/track, 91201 cylinders, total 1465147055 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    Partition Boot Start End Size Id System
    /dev/sda1 417,690 6,554,519 6,136,830 82 Linux swap / Solaris
    /dev/sda2 25,414,954 1,465,144,064 1,439,729,111 5 Extended
    /dev/sda5 25,414,956 1,360,287,809 1,334,872,854 83 Linux
    /dev/sda6 1,360,287,873 1,423,198,349 62,910,477 83 Linux
    /dev/sda7 1,423,198,413 1,465,144,064 41,945,652 83 Linux
    /dev/sda3 6,554,520 25,414,829 18,860,310 83 Linux
    /dev/sda4 * 63 417,689 417,627 83 Linux
    Drive: sdb ___________________ _____________________________________________________
    Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
    255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    Partition Boot Start End Size Id System
    /dev/sdb1 2,048 1,953,523,711 1,953,521,664 83 Linux
    blkid -c /dev/null: ____________________________________________________________
    Device UUID TYPE LABEL
    /dev/loop0 squashfs
    /dev/sda1 2a95d85a-45fe-4584-88dd-0ee20e651ec5 swap
    /dev/sda2: PTTYPE="dos" PART_ENTRY_SCHEME="dos" PART_ENTRY_TYPE="0x5" PART_ENTRY_NUMBER="2"
    /dev/sda3 32495e1a-227c-4d23-9f63-b1319def0dd9 ext3
    /dev/sda4 d6dc69b0-967d-4886-b62d-8c0d6be06b41 ext3
    /dev/sda5 37971286-b8d3-4a1b-9f94-4008288fed6d ext3 data
    /dev/sda6 d15cf4f9-18ca-4ec5-95bc-db0f6f264736 ext3 30GB-02
    /dev/sda7 eb736131-b558-4404-9b83-7f1e6d9e76ae ext3 var
    /dev/sda: PTTYPE="dos"
    /dev/sdb1 0e83045d-a0bd-4d36-b61d-bdb905130dc2 xfs 1TB-04
    /dev/sdb: PTTYPE="dos"
    ============================ "mount | grep ^/dev output: ===========================
    Device Mount_Point Type Options
    /dev/sda12 / ext3 (rw,commit=0)
    =============================== sda3/etc/fstab: ===============================
    # /etc/fstab: static file system information.
    # <file system> <mount point> <type> <options> <dump> <pass>
    proc /proc proc defaults 0 0
    # /dev/sda1 = swap
    /dev/sda1 none swap sw 0 0
    # /dev/sda3 = root
    #UUID=32495e1a-227c-4d23-9f63-b1319def0dd9
    /dev/sda3 / ext3 relatime,errors=remount-ro 0 1
    # /dev/sda4 = boot
    # UUID=d6dc69b0-967d-4886-b62d-8c0d6be06b41
    /dev/sda4 /boot ext3 relatime 0 2
    # /dev/sda5 = home
    # UUID=670eee83-0a3e-429c-863f-b9ecced9f97e
    /dev/sda5 /home ext3 relatime 0 2
    #/dev/sda6
    #UUID=37971286-b8d3-4a1b-9f94-4008288fed6d
    /dev/sda6 /home/ben/Data ext3 defaults,relatime 0 0
    # /dev/sda7
    # UUID=fdb14ca4-d71d-489f-a00e-6e608770674c
    /dev/sda7 /var ext3 relatime 0 2
    # /dev/sda8
    /dev/sda8 /opt ext3 relatime 0 2
    # /dev/sda10 - Arch
    /dev/sda10 /mnt/arch ext3 relatime 0 2
    # Not sure what this is doing here
    # Have commented it out - May be the reason why xbmc and mythtv were crashing on dvd insert and play
    # /dev/hda /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
    # /dev/sde1
    # uuid appears to be 644406B3570C1846 -> ../../sde1
    #/dev/sde1 /home/ben/Data/TVRecordings-1TB01 xfs defaults,relatime 0 0
    #1TB-01
    UUID=76f3823a-81dc-45c9-a0b7-2bc6c3beb2f8 /media/1TB-01 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
    d defaults, relatime
    # 1TB-02
    UUID=59cbf7a1-7008-40d0-96ed-c6f231823d4f /media/1TB-02 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
    d defaults, relatime
    # 1TB-03
    UUID=0e936800-3c53-4b87-abc8-19be0ffca7f9 /media/1TB-03 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
    d defaults, relatime
    # 750GB-02 ext3 Partition
    # UUID giving problems, trying with dev
    # UUID=c23b9c9a-66fc-4256-9211-73156c1ac64a /media/750GB-02_ext3 ext3 defaults,relatime 0 0
    /dev/sde2 /media/750GB-02_ext3 ext3 defaults,relatime 0 0
    ============================= sda4/grub/menu.lst: =============================
    # menu.lst - See: grub(8), info grub, update-grub(8)
    # grub-install(8), grub-floppy(8),
    # grub-md5-crypt, /usr/share/doc/grub
    # and /usr/share/doc/grub-doc/.
    ## default num
    # Set the default entry to the entry number NUM. Numbering starts from 0, and
    # the entry number 0 is the default if the command is not used.
    # You can specify 'saved' instead of a number. In this case, the default entry
    # is the entry saved with the command 'savedefault'.
    # WARNING: If you are using dmraid do not use 'savedefault' or your
    # array will desync and will not let you boot your system.
    default 0
    ## timeout sec
    # Set a timeout, in SEC seconds, before automatically booting the default entry
    # (normally the first entry defined).
    timeout 3
    ## hiddenmenu
    # Hides the menu by default (press ESC to see the menu)
    hiddenmenu
    # Pretty colours
    #color cyan/blue white/blue
    ## password ['--md5'] passwd
    # If used in the first section of a menu file, disable all interactive editing
    # control (menu entry editor and command-line) and entries protected by the
    # command 'lock'
    # e.g. password topsecret
    # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
    # password topsecret
    # examples
    # title Windows 95/98/NT/2000
    # root (hd0,0)
    # makeactive
    # chainloader +1
    # title Linux
    # root (hd0,1)
    # kernel /vmlinuz root=/dev/hda2 ro
    # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
    ### BEGIN AUTOMAGIC KERNELS LIST
    ## lines between the AUTOMAGIC KERNELS LIST markers will be modified
    ## by the debian update-grub script except for the default options below
    ## DO NOT UNCOMMENT THEM, Just edit them to your needs
    ## ## Start Default Options ##
    ## default kernel options
    ## default kernel options for automagic boot options
    ## If you want special options for specific kernels use kopt_x_y_z
    ## where x.y.z is kernel version. Minor versions can be omitted.
    ## e.g. kopt=root=/dev/hda1 ro
    ## kopt_2_6_8=root=/dev/hdc1 ro
    ## kopt_2_6_8_2_686=root=/dev/hdc2 ro
    # kopt=root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro
    ## default grub root device
    ## e.g. groot=(hd0,0)
    # groot=(hd0,3)
    ## should update-grub create alternative automagic boot options
    ## e.g. alternative=true
    ## alternative=false
    # alternative=true
    ## should update-grub lock alternative automagic boot options
    ## e.g. lockalternative=true
    ## lockalternative=false
    # lockalternative=false
    ## additional options to use with the default boot option, but not with the
    ## alternatives
    ## e.g. defoptions=vga=791 resume=/dev/hda5
    # defoptions=quiet splash
    ## should update-grub lock old automagic boot options
    ## e.g. lockold=false
    ## lockold=true
    # lockold=false
    ## Xen hypervisor options to use with the default Xen boot option
    # xenhopt=
    ## Xen Linux kernel options to use with the default Xen boot option
    # xenkopt=console=tty0
    ## altoption boot targets option
    ## multiple altoptions lines are allowed
    ## e.g. altoptions=(extra menu suffix) extra boot options
    ## altoptions=(recovery) single
    # altoptions=(recovery mode) single
    ## controls how many kernels should be put into the menu.lst
    ## only counts the first occurence of a kernel, not the
    ## alternative kernel options
    ## e.g. howmany=all
    ## howmany=7
    # howmany=all
    ## should update-grub create memtest86 boot option
    ## e.g. memtest86=true
    ## memtest86=false
    # memtest86=true
    ## should update-grub adjust the value of the default booted system
    ## can be true or false
    # updatedefaultentry=false
    ## should update-grub add savedefault to the default options
    ## can be true or false
    # savedefault=false
    ## ## End Default Options ##
    title Ubuntu 10.04.1 LTS, kernel 2.6.32-26-generic
    root (hd0,3)
    kernel /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
    initrd /initrd.img-2.6.32-26-generic
    quiet
    title Ubuntu 10.04.1 LTS, kernel 2.6.32-26-generic (recovery mode)
    root (hd0,3)
    kernel /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
    initrd /initrd.img-2.6.32-26-generic
    title Ubuntu 10.04.1 LTS, kernel 2.6.32-24-generic
    root (hd0,3)
    kernel /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
    initrd /initrd.img-2.6.32-24-generic
    quiet
    title Ubuntu 10.04.1 LTS, kernel 2.6.32-24-generic (recovery mode)
    root (hd0,3)
    kernel /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
    initrd /initrd.img-2.6.32-24-generic
    title Ubuntu 10.04.1 LTS, kernel 2.6.32-23-generic
    root (hd0,3)
    kernel /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
    initrd /initrd.img-2.6.32-23-generic
    quiet
    title Ubuntu 10.04.1 LTS, kernel 2.6.32-23-generic (recovery mode)
    root (hd0,3)
    kernel /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
    initrd /initrd.img-2.6.32-23-generic
    title Ubuntu 10.04.1 LTS, kernel 2.6.32-22-generic
    root (hd0,3)
    kernel /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
    initrd /initrd.img-2.6.32-22-generic
    quiet
    title Ubuntu 10.04.1 LTS, kernel 2.6.32-22-generic (recovery mode)
    root (hd0,3)
    kernel /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
    initrd /initrd.img-2.6.32-22-generic
    title Ubuntu 10.04.1 LTS, memtest86+
    root (hd0,3)
    kernel /memtest86+.bin
    quiet
    ### END DEBIAN AUTOMAGIC KERNELS LIST
    ============================= sda4/grub/grub.cfg: =============================
    # DO NOT EDIT THIS FILE
    # It is automatically generated by /usr/sbin/grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    set default="0"
    if [ ${prev_saved_entry} ]; then
    set saved_entry=${prev_saved_entry}
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z ${boot_once} ]; then
    saved_entry=${chosen}
    save_env saved_entry
    fi
    function recordfail {
    set recordfail=1
    if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
    insmod ext2
    set root='(hd0,3)'
    search --no-floppy --fs-uuid --set 32495e1a-227c-4d23-9f63-b1319def0dd9
    if loadfont /usr/share/grub/unicode.pf2 ; then
    set gfxmode=640x480
    insmod gfxterm
    insmod vbe
    if terminal_output gfxterm ; then true ; else
    # For backward compatibility with versions of terminal.mod that don't
    # understand terminal_output
    terminal gfxterm
    fi
    fi
    insmod ext2
    set root='(hd0,4)'
    search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
    set locale_dir=($root)/grub/locale
    set lang=en
    insmod gettext
    if [ ${recordfail} = 1 ]; then
    set timeout=-1
    else
    set timeout=10
    fi
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/05_debian_theme ###
    set menu_color_normal=white/black
    set menu_color_highlight=black/light-gray
    ### END /etc/grub.d/05_debian_theme ###
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Ubuntu, with Linux 2.6.32-26-generic' --class ubuntu --class gnu-linux --class gnu --class os {
    recordfail
    insmod ext2
    set root='(hd0,4)'
    search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
    linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
    initrd /initrd.img-2.6.32-26-generic
    menuentry 'Ubuntu, with Linux 2.6.32-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
    -class os {
    recordfail
    insmod ext2
    set root='(hd0,4)'
    search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
    echo 'Loading Linux 2.6.32-26-generic ...'
    linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
    echo 'Loading initial ramdisk ...'
    initrd /initrd.img-2.6.32-26-generic
    menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
    recordfail
    insmod ext2
    set root='(hd0,4)'
    search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
    linux /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
    initrd /initrd.img-2.6.32-24-generic
    menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
    -class os {
    recordfail
    insmod ext2
    set root='(hd0,4)'
    search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
    echo 'Loading Linux 2.6.32-24-generic ...'
    linux /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
    echo 'Loading initial ramdisk ...'
    initrd /initrd.img-2.6.32-24-generic
    menuentry 'Ubuntu, with Linux 2.6.32-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
    recordfail
    insmod ext2
    set root='(hd0,4)'
    search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
    linux /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
    initrd /initrd.img-2.6.32-23-generic
    menuentry 'Ubuntu, with Linux 2.6.32-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
    -class os {
    recordfail
    insmod ext2
    set root='(hd0,4)'
    search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
    echo 'Loading Linux 2.6.32-23-generic ...'
    linux /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
    echo 'Loading initial ramdisk ...'
    initrd /initrd.img-2.6.32-23-generic
    menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
    recordfail
    insmod ext2
    set root='(hd0,4)'
    search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
    linux /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
    initrd /initrd.img-2.6.32-22-generic
    menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
    -class os {
    recordfail
    insmod ext2
    set root='(hd0,4)'
    search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
    echo 'Loading Linux 2.6.32-22-generic ...'
    linux /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
    echo 'Loading initial ramdisk ...'
    initrd /initrd.img-2.6.32-22-generic
    ### END /etc/grub.d/10_linux ###
    ### BEGIN /etc/grub.d/20_memtest86+ ###
    menuentry "Memory test (memtest86+)" {
    insmod ext2
    set root='(hd0,4)'
    search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
    linux16 /memtest86+.bin
    menuentry "Memory test (memtest86+, serial console 115200)" {
    insmod ext2
    set root='(hd0,4)'
    search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
    linux16 /memtest86+.bin console=ttyS0,115200n8
    ### END /etc/grub.d/20_memtest86+ ###
    ### BEGIN /etc/grub.d/30_os-prober ###
    menuentry "Arch Linux (on /dev/sda10)" {
    insmod ext2
    set root='(hd0,10)'
    search --no-floppy --fs-uuid --set 26851879-58d1-4d65-90b4-e0845fe1176c
    linux /boot/vmlinuz26 root=/dev/sda10 ro
    initrd /boot/kernel26.img
    menuentry "Arch Linux Fallback (on /dev/sda10)" {
    insmod ext2
    set root='(hd0,10)'
    search --no-floppy --fs-uuid --set 26851879-58d1-4d65-90b4-e0845fe1176c
    linux /boot/vmlinuz26 root=/dev/sda10 ro
    initrd /boot/kernel26-fallback.img
    #### END /etc/grub.d/30_os-prober ###
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    # From Arch grub menu.lst
    # (0) Arch Linux
    #title Arch Linux [/boot/vmlinuz26]
    #root (hd0,0)
    #kernel /vmlinuz26 root=/dev/sda3 ro
    #initrd /kernel26.img
    #Note: With a separate boot partition, omit /boot from the path, (i.e. type set prefix=(hdX,Y)/grub and insmod
    (hdX,Y)/grub/linux.mod).
    #This introduces the "linux" and "initrd" commands, which should be familiar (see #Configuration).
    #An example, booting Arch Linux:
    #set root=(hd0,5)
    #linux /boot/vmlinuz26 root=/dev/sda5
    #initrd /boot/kernel26.img
    #boot
    ###menuentry "Arch1" {
    ###insmod ext2
    ###set root='(hd0,10)'
    #search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
    PARTITION
    #linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
    UBUNTU THIS IS THE ROOT PARTITION
    #initrd /initrd.img-2.6.32-26-generic
    ###search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UU
    ID
    ###linux /boot/vmlinuz-26 root=635d7d02-3f5b-4af6-9c74-16b2af8cc7fd ro quiet splash # ARCH'S ROOT UUID
    ###initrd /boot/kernel26.img
    # /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
    ###menuentry "Arch2" {
    ###insmod ext2
    ###set root='(hd0,4)' #= TRYING UBUNTU'S BOOT
    #search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
    PARTITION
    #linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
    UBUNTU THIS IS THE ROOT PARTITION
    #initrd /initrd.img-2.6.32-26-generic
    #search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UUID
    ###linux /boot/vmlinuz-26 root=/dev/sda10 ro quiet splash # TRYING ARCH'S ROOT DEVICE FORMAT
    ###initrd /boot/kernel26.img
    # /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
    ###menuentry "Arch3" {
    ###insmod ext2
    ###set root='(hd0,10)' #= TRYING UBUNTU'S BOOT IN HD FORMAT
    #search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
    PARTITION
    #linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
    UBUNTU THIS IS THE ROOT PARTITION
    #initrd /initrd.img-2.6.32-26-generic
    #search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UUID
    ###linux /boot/vmlinuz-26 root=/dev/sda10 ro quiet splash # TRYING ARCH'S ROOT DEVICE FORMAT
    ###initrd /boot/kernel26.img
    # /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
    ### END /etc/grub.d/40_custom ###
    =================== sda4: Location of files loaded by Grub: ===================
    .0GB: grub/core.img
    .0GB: grub/grub.cfg
    .0GB: grub/menu.lst
    .0GB: grub/stage2
    .0GB: initrd.img-2.6.32-22-generic
    .0GB: initrd.img-2.6.32-23-generic
    .1GB: initrd.img-2.6.32-24-generic
    .1GB: initrd.img-2.6.32-26-generic
    .0GB: vmlinuz26
    .0GB: vmlinuz-2.6.32-22-generic
    .0GB: vmlinuz-2.6.32-23-generic
    .1GB: vmlinuz-2.6.32-24-generic
    .0GB: vmlinuz-2.6.32-26-generic
    =============================== StdErr Messages: ===============================
    No volume groups found
    mdadm: No arrays found in config file or automatically
    [/quote]
    Output of fdisk -l from chroot is -
    [quote]Disk /dev/sda: 750.2 GB, 750155292160 bytes
    255 heads, 63 sectors/track, 91201 cylinders, total 1465147055 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x0000b084
    Device Boot Start End Blocks Id System
    /dev/sda1 417690 6554519 3068415 82 Linux swap / Solaris
    /dev/sda2 25414954 1465144064 719864555+ 5 Extended
    /dev/sda3 6554520 25414829 9430155 83 Linux
    /dev/sda4 * 63 417689 208813+ 83 Linux
    /dev/sda5 25414956 1360287809 667436427 83 Linux
    /dev/sda6 1360287873 1423198349 31455238+ 83 Linux
    /dev/sda7 1423198413 1465144064 20972826 83 Linux
    Partition table entries are not in disk order
    Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
    255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disk identifier: 0x00025bd3
    Device Boot Start End Blocks Id System
    /dev/sdb1 2048 1953523711 976760832 83 Linux
    I need to post this now and come back from a different machine to note the error messages I am now getting on boot. ...
    Note that when I boot and press esc to get the menu I get the menu.lst I created (in the second quote) above in /dev/sda6, ie the one with the Arch hd and uuid entries - so grub is looking there and finding that menu.lst, but something goes wrong after that.
    OK. Have now booted the machine and after pressing esc and selecting the uuid entry (the same thing happens with the hd entry) I get a whole lot of stuff, but what seems relevant is (typing it out) -
    List of all partitions:
    No filesystem could mount root, tried:
    Kernel panic - not syncing: VS: Unable to mount root fs on unknown-block(0,0)
    Pid: 1, comm: swapper Not tainted 2.6.39-Arch #1
    If anyone can help I'd really appreciate it. This is my MythTV machine so the WAF is about to take a big dive!
    If I could just install grub to the MBR as if this was a new installation of Arch that would be great.
    I am really lost as to what is going on, which I'm sure is evident.
    Thanks a lot
    belbo
    Last edited by belbo (2011-08-12 13:31:23)

    Hi. Unfortunately that didn't help.
    So next, based on this post https://wiki.archlinux.org/index.php/Ke … el_version I chrooted into Arch and (a) rolled back and (b) reinstalled my kernel but that didn't help either. I suspected it wouldn't because the kernel was working fine before I deleted the partitions in question.
    [2011-08-08 23:32] ==> Image generation successful
    [2011-08-08 23:32] upgraded kernel26 (2.6.39.3-1 -> 2.6.39.3-1)
    I then did a pacman -Suy and the linux package has now replaced kernel26. ( See this wiki entry http://www.archlinux.org/news/changes-t … filenames/). I didn't change anything in menu.lst owing to this and it seems there is no need to. Unfortunately this hasn't helped either - still getting the kernel panic. 
    Pacman.log relating to the new kernel package below -
    [2011-08-09 00:22] Running 'pacman -Suy'
    [2011-08-09 00:22] synchronizing package lists
    [2011-08-09 00:23] starting full system upgrade
    [2011-08-09 00:23] Running 'pacman -Suy'
    [2011-08-09 00:23] synchronizing package lists
    [2011-08-09 00:23] starting full system upgrade
    [2011-08-09 00:26] removed python-mygpoclient (1.5-1)
    [2011-08-09 00:26] removed kernel26 (2.6.39.3-1)
    [2011-08-09 00:26] warning: /boot/grub/menu.lst installed as /boot/grub/menu.lst.pacnew
    [2011-08-09 00:26] upgraded grub (0.97-17 -> 0.97-19)
    [2011-08-09 00:26] upgraded icu (4.8-1 -> 4.8.1-1)
    [2011-08-09 00:26] upgraded linux-firmware (20110512-2 -> 20110727-1)
    [2011-08-09 00:26] >>> Updating module dependencies. Please wait ...
    [2011-08-09 00:26] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2011-08-09 00:26] ==> Building image from preset: 'default'
    [2011-08-09 00:26] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2011-08-09 00:26] ==> Starting build: 3.0-ARCH
    [2011-08-09 00:26] -> Parsing hook: [base]
    [2011-08-09 00:26] -> Parsing hook: [udev]
    [2011-08-09 00:26] -> Parsing hook: [autodetect]
    [2011-08-09 00:26] -> Parsing hook: [pata]
    [2011-08-09 00:26] -> Parsing hook: [scsi]
    [2011-08-09 00:26] -> Parsing hook: [sata]
    [2011-08-09 00:26] -> Parsing hook: [filesystems]
    [2011-08-09 00:26] -> Parsing hook: [usbinput]
    [2011-08-09 00:26] ==> Generating module dependencies
    [2011-08-09 00:26] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2011-08-09 00:26] 7079 blocks
    [2011-08-09 00:26] ==> Image generation successful
    [2011-08-09 00:26] ==> Building image from preset: 'fallback'
    [2011-08-09 00:26] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2011-08-09 00:26] ==> Starting build: 3.0-ARCH
    [2011-08-09 00:26] -> Parsing hook: [base]
    [2011-08-09 00:26] -> Parsing hook: [udev]
    [2011-08-09 00:26] -> Parsing hook: [pata]
    [2011-08-09 00:26] -> Parsing hook: [scsi]
    [2011-08-09 00:26] -> Parsing hook: [sata]
    [2011-08-09 00:26] -> Parsing hook: [filesystems]
    [2011-08-09 00:26] -> Parsing hook: [usbinput]
    [2011-08-09 00:26] ==> Generating module dependencies
    [2011-08-09 00:26] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2011-08-09 00:26] 23360 blocks
    [2011-08-09 00:26] ==> Image generation successful
    [2011-08-09 00:26] installed linux (3.0.1-1)
    I don't think I've mentioned that my old menu.lst seems to have disappeared and so must have been on one of the partitions that were deleted. I did have 2 Arch installations when I was setting things up months ago and that menu.lst may have been on the other partition but pointing to this partiton's kernel for booting. Presumably that's possible since this partiton is definitely the one I have been using for the last several months (confirmed by log and other files updated in the last few days etc). Even so, I suppose that probably wouldn't be relevant to this issue, since grub is finding the menu.lst on this partition when it boots so it is looking in the intended place now.
    It seems I'm at a bit of a dead end. It seems these kernel panics are usually because there is something wrong with the kernel - which there wasn't with mine (and presumably the kernel in the new linux package is fine) or there is a typo in menu.lst (I can't see one and nobody has pointed one out yet) or menu.lst is pointing to the wrong partition (mine is pointing to the same partition and /boot directory that is found by grub - which is where my boot image is located - so it seems to be correct). I have nevertheless tried editing the menu.lst entry when booting to boot from different partitions but so far that hasn't worked either.
    If anybody has other ideas I'd really appreciate it.
    If not, some suggestions on re-installing would also be appreciated. I have a recent tar archive of the partition, but presumably reinstalling that wouldn't be of much use since it would just put back what is currently there. I guess that I need to format the partition, create a separate boot partition, do a fresh install of Arch into the formatted partition (and with boot in the new boot partition). And then restore my tar backup (excluding the boot directory) into the formatted partition?
    Any assistance greatly appreciated.
    Thanks
    belbo
    Last edited by belbo (2011-08-08 23:17:49)

  • After deleting photos, memory in my iPad is still used. WHY?

    When connecting my iPad mini to iTunes on my MacBook Air it shows that I have 2489 pictures on the iPad and am using 28.4 GB for all those pictures. When I open the Photos app on my iPad it shows that I do not have ANY pictures on the iPad, which would be correct, as I have deleted them all. So why are they still using up all that memory? How can I clear the memory to make it available again? BTW, My iPad Settings>General>About agrees with iTunes. It shows that I have 2452 pix (why not 2489 as above?), and am using 28.4 GB for them. So again, HOW CAN I CLEAR THE UNUSED MEMORY, or get rid of the pix if they are indeed still hiding somewhere on my iPad?
    My iPad mini is running iOS 8.1.1
    Thanks for any help....

    Hi, Tahunga,
    May be you need to do a comprehensive first.
    Firstly, be aware that the phone can sometimes take a while to update free space after deleting large items. I have often wondered whether iOS is making the user experience a bit 'nicer' by reporting the item deleted instantly, while doing the actual deleting in the background. Or perhaps its just the time taken to update databases used to record/report used/free space. In any case, try giving it a few minutes (maybe an hour) and see if its 'settled down'.
    Next up, in the Photos app, check the albums 'tab'. Is the camera roll reporting entirely empty? Are there any other albums?
    Finally, plug the iPad into your computer, and open up an app like Apple's Image Capture or whatever you use on Windows/Mac/Linux to import photos from a camera. Check that there's actually no photos in the 'camera' that is your iPad. After clearing out my pad, I found a bunch of small, unreadable movie files and a few photos left over in this app. I don't know how or why, given the iPhone wasn't showing them, but they were clearly taking up space. You may have somehow ended up with a lot of these.

  • Have PS Element 12 using it with new MacBook pro.  When I edit and save a photo in jpeg format, and try to e-mail it, it has a duplicate but ghost image underneath, and I don't want this second image.  How do I get rid of it?

    Unwanted ghost image underneath edited file.  Need to solve!!!  Have not experienced this with my old CS2.  Please help.

    Hi Panamark,
    The problem has been resolved for me. I am a little fuzzy on how it got fixed.
    I only have 3G, so I think I went to the library to use wi-fi.
    I think I just deleted the stuck apps, and the downloaded them again. You do not have to pay again when you download a previously purchased app.
    It is now August, and fortunately I have not had any stuck apps lately.
    As you may already know, you cannot download an app over 20 MB via 3G.
    I have the Kindle app also. No new updates lately. I only bought one thing using Kindle. It was a guide to iPad that was only $1.99 or so, but it did not really have anything that cannot be found in normal free Apple guide.
    I have borrowed an ebook from the library using Overdrive app. You can choose the ebook version from Kindle.
    I don't have any weather apps.
    Let me know what happened when you get the chance.
    M

  • Corrupt Images after syncing Photos

    Has anyone experienced corrupt images after performing a sync?
    After activation and at some point during my first sync my machine blue screened. After a reboot it appears that everything is running smooth, however, I notice that most of the pictures that are synched are corrupted and many didn't synch at all.
    I removed all synch images and re-synched but I'm still experiencing the same problem.
    I'm hoping its an issue with Vista or iTunes and not my phone. Looks like I'm going to have to go out and get that Mac Book Pro after all

    Are you saying that the photos are appearing in the wrong albums, or that the photos are in their correct albums but are displayed in the different order within them ? If they are in the wrong albums then try deleting the photo cache from your computer and re-try the sync - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
    If the photos are displayed in the wrong order in the albums, then they will be displayed by capture date order unless you are syncing via iPhoto or Aperture on a Mac. To get them in a different order you will need to manipulate their capture dates : http://support.apple.com/kb/HT4221

  • I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

    I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

    Just go back in photoshop and use the Slice Select tool, then just click and select the slice and hit delete - if you're not sure which one is the active slice just right click and find the one that has the Delete Slice option.
    It's possible you either added the slices by accident or if you received it from someone they just had the slices hidden. For the future, you can go to View > Show > Slices to display (or hide) slices.

Maybe you are looking for

  • Error in retrieving and parsing XML File

    Hi Folks I am Working on People centric user interface, While i am custimizing a application in Business application Builder i am getting this error " Error in retrieving and parsing XML File " can any body look on this and give me the solution it wi

  • Why does my phone say invalid sim

    my iphone 4 says on it invalid sim this happened just after i did a software update on ituns does any one know wats wrong

  • Javascript error in event handler! edge 4.0.0.js, what to do about it?

    Site Hello everyone. I get an error in my chrome cosole, what can I do about this? I dont have this problem in all browsers, just in chrome, and in some versions of Firefox. The problem occurs when I click any label in the iframe (see website, speaks

  • How to use iTunes gift card in App Store

    My kids each just got an iPod touch with a gift card to iTunes ......how can they each purchase apps and things from iTunes while using my apple account? We redeemed the gift cards but I don't think it's set up right because the app price wasn't dedu

  • Output device locl is locked by R/3

    Hi Gurus, can anybody tell me how to unlock the printer in SPAD? Thanks in advance. Thanks & Regards, Lata Borannavar