Ghost Jive notifications that don't exist on the forums

Hi,
I'm constantly getting Jive notifications to my iPhone. And then when I swipe on one, it opens the correct discussion or blog, as it should. But, there is no response to that discussion/blog on the web.
Any ideas why this is happening? It's a new thing, in the last week.
John

It's happened to me a couple of times over the past week.
I think it has to do with moderation: some content received multiple abuse reports and was hidden. Then these abuse reports were rejected and the content put back into circulation, which we know forces it back into the communications stream as unread, forcing a notification on the mobile app.
Moving content would also have this effect.

Similar Messages

'Raw' Data XMP view shows internal properties that don't exist in the data

In FileInfo view for an image, if I switch to the 'Raw Data' tab, it shows photoshop:ColorMode and photoshop:ICCProfile. However, when I check the actual XMP data of the image e.g. using exiftool or a text editor, these properties do not exist in the XMP data.
According to this thread: http://forums.adobe.com/message/5057589 these are both internal properties to PS / Bridge, which explains why they don't exist in the XMP. But why are they shown in the 'Raw' data view for the XMP then? Showing them here is just confusing as it makes it seem like they should exist in the XMP data.
I can't really see any point in including nonexistent tags in the Raw Data view. But if it is deemed necessary, how about highlighting them a different color, such as using a grey font instead of black? At least it would indicate that they were different to the real data.
P.S. This is with Bridge CS5, possibly the issue has been fixed in CS6?

Hi Paul
The issue is that the Bridge File Info panel is showing these tags in the XMP for the image, but if you check the XMP of the file, those tags aren't there.
As a side issue, Bridge File Info panel is also showing the XMP in a different structure to that which exists in the actual file. There are two issues here really
ACR is not writing the photoshop:ColorMode tag (or the photoshop:ICCProfile tag) to the JPEG (I checked the .xmp sidecar file for the RAW file and the photoshop:ColorMode tag does exist in there, but does not exist in the JPEG file converted through ACR).
Bridge's File Info panel is showing data in the XMP that is not actually there.
Although I would like the ColorMode tag added to the image, I don't think point 1 is a real issue, since the ICC profile is embedded okay. Point 2 does appear to be a bug (or at least it is confusing if it is intended behaviour).

How do I show a count for rows that don't exist?

Hi, I'm trying to count the number of records grouped by rank(B,C,R),month,and year. Basically, anytime a part fails testing a record is entered which records the failure Rank and occurrence date. A record is only inserted if a part failed for specific rank. So not all 3 ranks will have entries. I'm able to count all ranks by month,year that do exist. But how do I get values of 0 for the ranks that don't exist? I just created a table qa_rank that has just one column rank with 3 records(b,c,r). but its not being used as of now. rank is just a column in qa_occ record.Here is my query.
select to_char(occdate,'YY') as yr, to_char(occdate,'MM') as mn,
rank, count(occdate)
from qa_occ
where q.occdate between '1-Apr-2005'and '31-Mar-2006'
and q.supplier = '11107'
group by to_char(q.occdate,'YY'),to_char(q.occdate,'MM'),q.rank
order by to_char(q.occdate,'YY'),to_char(q.occdate,'MM')
which returns this
YY MM RANK COUNT(OCCDATE)
05 09 C 2
05 10 C 2
05 11 C 1
05 11 R 1
06 01 C 3
06 02 C 1
06 03 B 1
06 03 C 2
I need it to return C,B,R for everymonth. If no records exist then the count for the month,rank should be 0. Any ideas? Thanks.

something like:
SQL> with qa_occ as
2 (select to_date('09/15/2005','mm/dd/yyyy') occdate, 'B3661-RYPX-A000' part, 'C' rank, 4 indexpoints from dual
3   union all
4   select to_date('09/25/2005','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
5   union all
6   select to_date('10/11/2005','mm/dd/yyyy') occdate, null part, 'C' rank, 7 indexpoints from dual
7   union all
8   select to_date('10/20/2005','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
9   union all
10   select to_date('11/11/2005','mm/dd/yyyy') occdate, null part, 'C' rank, 4 indexpoints from dual
11   union all
12   select to_date('11/18/2005','mm/dd/yyyy') occdate, 'B3661-RYPX-A000' part, 'R' rank, 0 indexpoints from dual
13   union all
14   select to_date('01/11/2006','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
15   union all
16   select to_date('01/25/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'C' rank, 4 indexpoints from dual
17   union all
18   select to_date('01/27/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'C' rank, 4 indexpoints from dual
19   union all
20   select to_date('02/15/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'C' rank, 4 indexpoints from dual
21   union all
22   select to_date('03/07/2006','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
23   union all
24   select to_date('03/14/2006','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
25   union all
26   select to_date('03/15/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'B' rank, 13 indexpoints from dual)
27 select * from qa_occ;
OCCDATE   PART            R INDEXPOINTS
15-SEP-05 B3661-RYPX-A000 C           4
25-SEP-05 B3661-RYP-A000 C           4
11-OCT-05                 C           7
20-OCT-05 B3661-RYP-A000 C           4
11-NOV-05                 C           4
18-NOV-05 B3661-RYPX-A000 R           0
11-JAN-06 B3661-RYP-A000 C           4
25-JAN-06 3511-RNA0-0111 C           4
27-JAN-06 3511-RNA0-0111 C           4
15-FEB-06 3511-RNA0-0111 C           4
07-MAR-06 B3661-RYP-A000 C           4
14-MAR-06 B3661-RYP-A000 C           4
15-MAR-06 3511-RNA0-0111 B          13
13 rows selected.
assuming that there are only three ranks available B, C,and R we considered this as a lookup values. now in the query below we incorporate an inline view for the lookup values:
SQL> with qa_occ as
2 (select to_date('09/15/2005','mm/dd/yyyy') occdate, 'B3661-RYPX-A000' part, 'C' rank, 4 indexpoints from dual
3   union all
4   select to_date('09/25/2005','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
5   union all
6   select to_date('10/11/2005','mm/dd/yyyy') occdate, null part, 'C' rank, 7 indexpoints from dual
7   union all
8   select to_date('10/20/2005','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
9   union all
10   select to_date('11/11/2005','mm/dd/yyyy') occdate, null part, 'C' rank, 4 indexpoints from dual
11   union all
12   select to_date('11/18/2005','mm/dd/yyyy') occdate, 'B3661-RYPX-A000' part, 'R' rank, 0 indexpoints from dual
13   union all
14   select to_date('01/11/2006','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
15   union all
16   select to_date('01/25/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'C' rank, 4 indexpoints from dual
17   union all
18   select to_date('01/27/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'C' rank, 4 indexpoints from dual
19   union all
20   select to_date('02/15/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'C' rank, 4 indexpoints from dual
21   union all
22   select to_date('03/07/2006','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
23   union all
24   select to_date('03/14/2006','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
25   union all
26   select to_date('03/15/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'B' rank, 13 indexpoints from dual)
27 select qa.yr, qa.mn,
28         decode(qa.rank,lk.rank,qa.rank,lk.rank) rank,
29         sum(decode(qa.rank,lk.rank,qa.cnt,0)) cnt
30    from (select to_char(qo.occdate,'YY') as yr,
31                 to_char(qo.occdate,'MM') as mn,
32                 qo.rank,
33                 count(qo.occdate) cnt
34            from qa_occ qo
35          group by to_char(qo.occdate,'YY'),
36                   to_char(qo.occdate,'MM'),
37                   qo.rank) qa,
38         (select 'B' rank from dual
39          union all
40          select 'C' rank from dual
41          union all
42          select 'R' rank from dual) lk
43 group by qa.yr, qa.mn, decode(qa.rank,lk.rank,qa.rank,lk.rank)
44 order by qa.yr, qa.mn, decode(qa.rank,lk.rank,qa.rank,lk.rank);
YR MN R        CNT
05 09 B          0
05 09 C          2
05 09 R          0
05 10 B          0
05 10 C          2
05 10 R          0
05 11 B          0
05 11 C          1
05 11 R          1
06 01 B          0
06 01 C          3
06 01 R          0
06 02 B          0
06 02 C          1
06 02 R          0
06 03 B          1
06 03 C          2
06 03 R          0
18 rows selected.
SQL>

Import photos that don't exist...

When I import pictures into iPhoto from an external hard drive, there are mystery pictures that are showing up. These are pictures that used to exist on the HD but that I deleted from there.
I deleted my entire iPhoto library and emptied the trash within iPhoto. I then went to the "show package contents" of my iPhoto library on my computer's HD and deleted everything.
I tried to re-import the pictures from the external HD to iPhoto, but AGAIN, the mystery pictures are there. I've checked the folder in the HD that they are showing up in. But, they are not there. I've even done a search on my computer, and the files don't exist.
Please help me figure out why this is happening. I just don't know how to get rid of these pictures. I want them gone...completely!!!
Thank you!!!

I then went to the "show package contents" of my iPhoto library on my computer's HD and deleted everything.
Never make changes to the structure or content of the iPhoto library using the finder
make sure you have the photos you want safe and drag the baad iPhoto library to the trash and empty it and then depress the option key and launch iPhoto and create anew library - now start using this correctly set up library
LN

Movies that don't exist

front row looks in the movies folder and lists the contents, right?
well it's showing titles in that are not in and have never been
in my movies folder.
nothing happens when selecting these (probably because they don't exist).
of course i can't delete since they do not appear in the finder or
spotlight search.
i tried deleting everything in the movies folder, of course all
that's left in front row are the movies that don't exist.
any suggestions?
Message was edited by: avinbc

Are your movies, even though they're gone from the hard drive, listed in iTunes somewhere? That would make them appear in Front Row even under the Videos section.
The Front Row preference file does not remember anything except which module was the last one you used.
-Doug

Get rowns that don't exist in any of the tables.

Hi,
I need to implement some views to compare systems.
This views will compare tables with the same structure and I want to extract the rows that don’t exist in any of the sides.
I need to implement some views to compare only two tables, others to compare 3 tables and one to compare 5 tables and another to compare 10 tables!
Each table can contains from a few rows up to 10 million rows (that was the biggest count I found for this tables).
My test scenario:
CREATE TABLE TEST_TABLE
(COL1 NUMBER ,
COL2 CHAR(25));
CREATE TABLE TEST_TABLE2
(COL1 NUMBER ,
COL2 CHAR(25));
CREATE TABLE TEST_TABLE3
(COL1 NUMBER ,
COL2 CHAR(25));
insert into TEST_TABLE (COL1,COL2) values (1,'2');
insert into TEST_TABLE (COL1,COL2) values (11,'t1');
insert into TEST_TABLE2 (COL1,COL2) values (1,'2');
insert into TEST_TABLE2 (COL1,COL2) values (22,'t2');
insert into TEST_TABLE3 (COL1,COL2) values (1,'2');
insert into TEST_TABLE3 (COL1,COL2) values (33,'t3');To find the differences between two tables I implemented the following:
select * from
(select * from TEST_TABLE
minus
select * from TEST_TABLE2
union all
(select * from TEST_TABLE2
minus
select * from TEST_TABLE
Result:
COL1 COL2
11     t1
22     t2                       For the 3 tables comparison The result should be:
Result:
COL1 COL2
11     t1
22     t2
33     t3                       For the other ones I can implement the same way, but for sure this is not the prettiest and most performing solution!
How can I achieve the result I intent with the most performance?
Thanks,
Ricardo Tomás

You didn't say if you allow duplicates in your tables, so i assumed you didn't.
If a single table could have multiple occurrences of a given col1, col2 combination you would need to distinct the col1,col2 list from each table before doing the union all.
ME_XE? select
2     col1, col2
3 from
4 (
5     select col1, col2       from test_table
6             union all
7     select col1, col2       from test_table2
8             union all
9     select col1, col2       from test_table3
10 )
11 group by
12     col1, col2
13 having count(*) = 1;
              COL1 COL2
                33 t3
                22 t2
                11 t1
3 rows selected.
Elapsed: 00:00:00.01
ME_XE?

How to stop iphoto from recovering photos that don't exist?

I just bought my iMac and transferred all my photos from my backup drive to the iphoto library. In organizing my photos I must have deleted photos or had some corrupted photos in the transfer. Now, every time I open iphoto is says it has recovered 75 or so photos, creates a folder for them, but it's empty. How do I stop it from trying to recovery photos that don't exist? I've searched and have found nothing. The folder generated by iphoto as a recovered folder is empty...

Welcome to the Apple Discussions.
Can you give me an idea of why this type of error occurred
Because of a minor glitch when iPhoto failed to clean up after an import.
why has this now corrected the error?
iPhoto should remove that Importing Folder at the end of the importing session. When you launched iPhoto again it saw the folder and (incorrectly) assumed there was an import in progress. Removing the folder means that iPhoto won't make that assumption.
There is no reason to assume that the problem wil recur.
Regards
TD

Deauthorizing computers that don't exist

How am I supposed to deauthorize computers that don't exist? Every time I've had to reinstall Windows, iTunes eats up another "authorization". Now all 5 authorizations are taken, and my iTunes purchases are useless. I only have 1 computer, Apple, so make this easier for Windows users, will you?

Every time I've had to reinstall Windows, iTunes eats up another "authorization".
Your supposed to deathorize BEFORE a re-install. Not after. iTunes makes it very easy to do that.
Now all 5 authorizations are taken, and my iTunes purchases are useless. I only have 1 computer, Apple, so make this easier for Windows users, will you?
Apple makes it easy enough to de-authorize your computer. You can even do a de-authorize all once a year. Log on your account and you should be able to not only view your authorizations, but have an option to de-authorize all of them.

How do you fix certain app notifications that don't appear or appear twice?

On my iPhone or iPad, sometimes there are notifications that don't appear or appear twice. For example, I have a Fox News app. When I get an alert on my phone while it is locked, the same exact news notification appears twice in a row when I go to look at my phone. Also, there are times when app notifications won't show. For example, I have Bloomberg on my iPhone and my iPad. When there is a headline, the notification shows on my iPad but not my iPhone. The settings on both devices are the exact same in terms of notification center and lock screen being activated. Neither device is jail broken and both are running iOS 6.

I have also started experiencing this problem. I have tried the following with no help.
Reseting the phone
signing out of my Apple account and signing in again
tapping the waiting icon to pause it and tapping it again
deleting the app and trying to reload it - still says waiting
The only thing that has allowed me to update my apps was to update them in itunes on my laptop and then sync my phone.
This has to be a unique IOS issue, so many people are having this problem. I wonder if it is a Cloud issue?

Issues exist in release build that don't exist in debug build

I've been working on a Flex 4.1 project and have recently noticed an issue that does not exist in the debug build. Then when you export a release build and run it the issue appears. This is the only change that's made that breaks it. To me this seems to be a bug in the player, SDK, or compiler that I might need to post, but I figured I'd submit it here in case I'm missing something.
Basically it seems to be an issue with objects in an ArrayCollection being instantiated as the correct class type before being added.
When in debug mode, if you set a breakpoint to view the objects in the ArrayCollection you will see them appropriately as their Strongly Typed class. However, when the release mode build is run it will throw an RTE on that same line indicating that the ArrayCollection members are ObjectProxy and they can't be cast into their Strongly Typed class.
Here's the RTE that happens and right now I just need to know if I'm missing something, or if this looks like a bug, and to which bugbase it should be posted (Flash Player, Flex SDK, Flex Compiler, etc.)
TypeError: Error #1034: Type Coercion failed: cannot convert mx.utils::ObjectProxy@28250141 to
<confidential package path>.PlayerPageSummary.
    at <confidential package path>.service::InitializeStorefrontServiceResponseCommand/execute()
    at org.robotlegs.base::CommandMap/execute()
    at org.robotlegs.base::CommandMap/routeEventToCommand()
    at MethodInfo-1674()
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at <confidential package path>::<confidential acronym>ModuleActor/dispatchLocal()
    at <confidential package path>.live::InitializeStorefrontService/result()
    at mx.rpc::AsyncToken/http://www.adobe.com/2006/flex/mx/internal::applyResult()
    at mx.rpc.events::ResultEvent/http://www.adobe.com/2006/flex/mx/internal::callTokenResponders()
    at mx.rpc::AbstractOperation/http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
    at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::resultHandler()
    at mx.rpc::Responder/result()
    at mx.rpc::AsyncRequest/acknowledge()
    at DirectHTTPMessageResponder/completeHandler()
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at flash.net::URLLoader/onComplete()

Alex,
Thanks for your help and here's an update on this from me. We did try out your suggestion to see if "PlayerPageSummary can be retrieved via getClassAlias". I'm not the one that did the testing, but my teammate who did, said that the class being registered was not the issue.
While he was working on that I further investigated our ANT builder and configuration to see what might have been different between ANT building non-debug SWF and Flash Builder building non-debug SWF. Turns out that my teammate had added some [ArrayElementType] metadata that I was not aware of. Once I realized that, I added it as metadata to be kept in my flex-config.xml which ended up solving the debug vs. release mode issues.
Afterwards, I double-checked the livedocs and also did some Googling. From the above it appears that debug SWF keep all metadata without you needing to explicitly tell it to. On the other hand, outside of a handful of metadata tag such as [Bindable] release builds neeed to be told what to keep.
Does this sound right?
Also, do you know off the top of your head if this is documented by Adobe anywhere and what the link is? I had a real tough time finding anything mentioning how debug SWF retain all metadata.
Thanks again for your help!

HELP! "There are 309 files that don't belong in the project"

I needed to reformat my OS, so I backed up all my data onto DVD+RW's. (Verbatim brand.) including my imovies. I copied the entire "blahblah.iMovieProject" folder onto the DVD, then copied it back onto the drive after the reinstall. But now when I click on the project, it prompts me about this:
"There are 309 files that don't belong in the project"
and then this:
"There are 160 stray clip files in the project folder. Would you like to put them on the clips pane?"
After I click on "Leave Files Alone" for both of them, (versus move to trash, and Move files to clips pane, respectively), The project opens completely BLANK.
Oh great. Please inform. Am I out of luck?
Oh, btw, it also created like 10 versions of each photo in the "Media" folder. ick. what happened?...
g5 Mac OS X (10.3.9)

Also, one more thing! Now that this has happened, even after I quit and restart the computer, upon opening the application, instead of starting out with a brand new project, the same prompts appear, and then leaves me with that seemingly corrupt project which is blank.

Packages in the queue don't exist in the tp buffer

Hello
Please could you help us???. We have import packages SAPKINBC9A, but we have a problem, because we obtein error Packages in the queue don't exist in the tp buffer, what do we make for this packages exists in the buffer??
Thanks

Hello
Please could you help us???. We have import packages SAPKINBC9A, but we have a problem, because we obtein error Packages in the queue don't exist in the tp buffer, what do we make for this packages exists in the buffer??
Thanks

The application could not be installed because an application with that name already exists at the s

The application could not be installed because an application with that name already exists at the selected installation location. Try installing to a different location.

1. I am trying to install: Adobe - Download free trial version
AdobeAcrobat
XI Pro <http://www.adobe.com/go/tryacrobatpro/>
Operating system: Windows 7
Current software: see attachment
<Removed by Moderator>

Hello buy a movie on apple tv, and now can not find the device tells me I should go to settings / downloads / check downloads, but that does not exist in the menu of the apple tv, please help

Hello buy a movie on apple tv, and now can not find the device tells me I should go to settings / downloads / check downloads, but that does not exist in the menu of the apple tv, please help

Welcome to the Apple community.
A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

Old Reminders in Notification Centre That Don't Exist in Reminders

In the Notification Centre on my Mac I have 2 Reminders from 61 days ago listed, but I don't think they actually exist - if I click on them in the Notification Centre the Reminder application opens but on today, it doesn't go the the reminder I clicked on, and if I search in Reminders I can't find the entries either, neither can I if I go back 61 days in the application, they just don't exist.
I've turned notifications for Reminder off and on, it doesn't make a difference; obviously this is a corruption in a cache or file somewhere, does anyone know where the Notification information is held and how I can get rid of these two incorrent entries?
David
Mac OS X 10.8.4

I found it....
Kill the /System/Library/CoreServices/NotificationCenter.app/Contents/MacOS/Notification Center process and deleted the .db file in ~/Library/Application Support/NotificationCenter - the NotificationCenter process automatically restarts (so be quick on the delete of the .db file!), rebuild the database and it's clean now, the two old Reminder entries have gone.

Ghost Jive notifications that don't exist on the forums

Similar Messages

Maybe you are looking for