Ghost taskbar in Vista Ultimate x64 after undocking T61p with external displays

I use my T61p with the advanced docking station and two external monitors (DVI + VGA).
Frequently when I undock, my taskbar becomes a ghost, in that I only can see a small line that comes up (I have it in autohide) yet totally transparent. No content. I can get it to come back by "killing" the explorer task, and restarting that manually. Yet this erases the power manager part of the lenovo tools in the taskbar.
Anyone any idea why this would be happening?
I do press the undock button, and wait for the "undock complete" message before I physically take it out of the dock.
I have tried to find a reproducable sequence, but have not found any. It does not do it all the time. Just occasionally.
I guess it must be some driver issue, but was wondering if anyone has seen the same.
Message Edited by oskarbosch on 02-16-2009 11:30 AM

could this problem be related to the graphics BSOD and Computer Shutoffs we are see-ing in T61p's?
have you tried running any games like Bioshock, Crisis or Call of Duty 4 ? The demo versions would be enough to tell if its the same thing.
also are both RAM slots used for your memory ?
you might want to see this thread:
http://forums.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=55
what would be interesting is this is the first time I'm hearing it crash when using video in Skype. I suppose not many persons make video calls.
T61P - 6459-CTO - T7500 2.2Ghz - 4G DDR2 RAM - NV Quadro FX 570M 256mb - 160G 7200 rpm - WSXGA+ 15.4" - Vista Ultimate 32bit

Similar Messages

Boot Camp, Vista Ultimate x64 SP1, 2009 Mac Pro Quad 2.93, ATI 4870 HD

Hello All,
I’ve run into a problem installing Boot Camp with Vista Ultimate x64 SP1 on my early 2009 Mac Pro Quad 2.93 with Apple’s ATI Radeon 4870 HD (the one with one DVI and one mini-display). I followed the instructions from the Boot Camp Installation and Setup Guide, and everything was going great until I hit page 12 of the Guide (Step 3). The Boot Camp drivers installed without error, and prompted me to reboot. Upon rebooting onto the newly installed Vista x64 partition, the screen went black after the chkdsk screen appeared. I can boot into Vista safe mode, but booting into Vista normally results in the black screen. On a hunch, while in safe mode, I uninstalled the ATI video drivers installed by Boot Camp. I was then able to boot Vista normally, but only with the standard VGA adapter. Then I tried installing the latest 9.4 ATI drivers from the chipset vendor, AMD, http://game.amd.com/us-en/drivers_catalyst.aspx. Booting normally after the ATI chipset drivers were installed left me with a mostly black screen, and a few swizzles of horizontal color, but not enough to make out any sort of image. Once again, I was able to boot normally by first booting into safe mode and then uninstalling the ATI driver, leaving me with the standard VGA driver.
The displays I have tried so far are 1) Apple Cinema HD 23”, and 2) Apple Cinema 20”. Also, I have tried all 6 permutations with the ports on the Apple version of the ATI Radeon 4870 HD with both displays (using the mini-display to DVI adapter), 2 permutations with both displays, and 4 permutations with single displays. All permutations result in the same black screen after installing Boot Camp drivers.
Am I missing something? It seems to me that there is a display driver that needs to come from Apple that will work with the Apple version of the ATI Radeon 4870 HD in Vista Ultimate x64 SP1 attached to an Apple display. I’ve installed Vista Ultimate x64 SP1 and many other operating systems in the past 27 years of working with computers, and typically with video cards I’ve had to get the drivers from the vendor that shipped the card, not the chipset vendor. Sure, occasionally the opposite is true, and I don’t mind spending a few days to figure out what works best for me as long as I believe I am making progress.
Has anyone else run into this problem with his or her early 2009 Mac Pro Quad 2.93 with Apple’s ATI Radeon 4870 HD? I’m posting this in the Boot Camp forum as I think this problem is rooted in the Boot Camp drivers, specifically for the Apple ATI Radeon 4870 HD. Please let me know if I should post elsewhere.

You are the second person I think I've seen with trouble using Mac Pro and ATI drivers (other was on Mac Pro forum).
When updating graphics, there are extra steps that insure you get the best working drivers.
I've always found Apple to be behind the curve on Windows support. Drivers that come with a card from the vendor ususally means ATI or Nvidia, and even then, you go to the web and download and install the latest tested / beta / qualified drivers. Some people try a variety of driver versions to find the one that works best.
Apple has not been updating Boot Camp drivers for Late 2008 and on Macs. Boot Camp 2.1 is now over a year old. What is on your OEM Leopard DVD is the only drivers I would use - if at all! try without is what some do, and then see if you can selectively install. Under Windows 7, I don't need or install, and now with the RC/7077 version of 7, Microsoft 'blocks' installing Apple Boot Camp drivers as known to cause problems.
If it ain't broke, don't fix it. Unistall the various Apple services, drivers, startup items that you can live without or until you narrow it down. iTunes 8.1+ in Windows can break and prevent ability to even use optical drives and devices for instance.
Some tips for upgrading drivers, one from eVGA forum but should translate.
http://www.evga.com/forums/tm.asp?m=396474
http://game.amd.com/us-en/drivers_catalyst.aspx
http://downloads.guru3d.com/download.php?det=1655

TEMPRO is not working for Vista Ultimate x64

Hi
I have a Qosmio F50-10K and I installed Vista ultimate x64 and the Tempro appliaction is not working. After I install it, I left the Start Tempro button checked and when I press finish it gives me this error:
"internal error 2753
Toshiba.ui.controlpanelapplication.exe"
Same thing happens when I uncheck the box with start tempro.
For both situations nothing is left in the system, no files, no regstry, nothing.
Please HELP
Thank you

Hi!
I searched on the Toshiba download driver page and I found out, that Tempro is only available for Vista 32bit, not for 64bit.
So I think Tempro will not work on a 64bit OS.
Bye!

Digital Cable Advisor Missing From W7 Ultimate x64 After Full Install

I recently installed a new hard drive, and I did a fresh install of Windows 7 Ultimate x64, and when I go to Windows Media Center, the digital cable advisor is not located in Extras. I previously did the "upgrade in place" from Vista Ultimate x64 to W7, ran the advisor, plugged in my ATI Digital Cable Card Tuner, and was good to go. I cannot use the tuner without running the advisor. I am using Windows 7 that I downloaded from the the Technet web site, of which I am a member. Any ideas?
Edit - I figured it out. When you do a fresh install, running the advisor is not necessary, therefore it is not offered.. WMC will install Play Ready, and then update Play Ready to make your PC digital ready.
New development - When I attempt to access my premium channels (HBO, SHO, Starz, Encore), it gives me a message that my "PC is not digital ready", and to go to settings and "activate digital TV". I try to do that, and it tells me that my PC is not digital ready, therfore, I cannot use a cable card tuner, which is BS because I have every other channel on the cable card (in the 200's and 300's, which regular cable will not give you), to include all HD channels coming in just fine. I still don't have the digital cable advisor in my WMC Extras so that I can run it, which will supposedly make my PC "digital ready". My copy is activated, and my index score is 7.4. I have Comcast cable tv. I am at a loss... Anyone have any ideas/suggestions
My hardware: EVGA 790i Ultra SLI, Xeon X3370 3.4GHz O/C, UBER 655 Fully Modded (D-5) pump w/Koolance motor controller, Bitspower Water Tank Z PLUS, Patriot Viper 4GB (2X2GB) PVS34G2000LLKN, Powercolor LCS ATI Radeon HD 5870 w/EK WB, OCZ Z-Drive P84 PCIE 256GB SSD w/internal 4-way RAID 0, ATI TV Wonder Digital Cable Card Tuner, Thermaltake Toughpower 850W 80 Plus ESA PSU, Windows 7 Ultimate x64 RTM, (2) 150GB WD Raptor Windows 7 back-up

Thank you for the response. Below are my responses.
1. Did the TV work in Windows Media Center in Windows Vista? I used a Hauppauge 1800 PVR in Vista and Windows 7 after I did the upgrade in place, which did not require running the Digital Cable Advisor. I then switched to the ATI Digital Cable Card Tuner while using Windows 7, I ran the Digital Cable Advisor, and the card worked fine. I installed a new hard drive and did a full install of Windows 7, and the Digital Cable Advisor is not there.
2. If you cannot locate the Digital Cable Advisor in the Extras Library, then check that automatic downloads are enabled in your Media Center Settings (Settings | General | Automatic Download Options).   Automatic downloads are enables in WMC. In fact, when I installed the cable card tuner, WMC downloaded and installed PlayReady, and then updated Playready during the setup in WMC.
3. It also can be the TV Tuner and Graphics card driver issue, please update BIOS, Graphics, TV Tuner and chipset drivers to the latest version. Everything is up to date. I built this computer (I am not a novice), and the ATI card updated the firmware version when I installed it while it was running in Windows 7 after the original upgrade in place. I also checked the firmware version after the full installation of W7, and it has the latest firmware version. Windows 7 Automatic Updates downloaded the latest ATI cable card driver from Microsoft. I am using a brand new graphics card (listed in my 1st post), and the drivers are the latest signed drivers from the AMD/ATI website.
4. You can also try the following steps:
(1.)     Click the start button, try CMD, right click on CMD and choose Run as Administrator.
(2.)     In Command prompt window, type the following commands and press Enter at the end of each line:
cd \
cd c:\Windows\ehome
start /wait mcupdate -u –nogc
After that, restart Windows Media Center to check if it works now.
I will try the above steps when I get home.
4. If not, you may want to reset Windows Media Section:
(1.) Open Control Panel/Programs and Features.
(2.) Click "Turn Windows features on or off" in the left pane.
(3.) Expand "Media Features", uncheck "Windows Media Center". Click "Yes" to continue, and click OK to quit. Then Restart.
Note: You may need to re-configure settings for Windows Media Center after re-enabling it.
(4.) Open "Turn Windows features on or off" again. Turn on the features "Windows Media Player" and "Windows Media Center". Restart.
I have tried the following three times, the Digital Cable Advisor still does not show up in WMC Extras
What I do not understand is that the cable card is running in W7 and shows all channels except the premium channels (SHO, HBO, Encore, and Starz), when I attempt those, I get the "your PC is not Digital Ready, therefore, you cannot use a cable card" screen. Additionally it is now happening when I attempt to watch A&E (HD). It is not the card, which ran fine in Windows 7 after the upgrade in place from Vista. This did not happen until I performed a full installation.

Distribution of Java JRE on Windows Vista Ultimate x64

The automatic update of the Java JRE on my Windows Vista Ultimate x64 system often comes up saying a new update is available but then as soon as I go ahead to install it, the update tells me that the particular version of the JRE is already installed.
How can this automatic update bug for new JRE installations be fixed.

Uninstall the software cleanly via the "Add or Remove programs" panel, then run another install. The breakdown is in the licensing system, not the application itself. Do not run the clean scripts until you have attempted this. If it still fails, then indeed a call to Adobe tech might do wonders...
Beste Grüße
Mylenium

ThinkVantage GPS instantly crashes in Vista Ultimate x64

My W500 laptop came with XP preloaded and the GPS application started up fine. Now I installed Vista Ultimate x64, as well as all drivers I could find on the official website, and GPS does not work anymore. As soon as I start it, there is an immediate crash. Device manager does not show a single unknown device plugged in. I have the Ericcson F3507g module and the laptop came with a SIM card for it, which is installed. Can anyone shed some light on this situation?

The GPS app is just past the middle on the drivers page, http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70443
I am a little weary of using Windows 7 because it's RC still. Though with all those positive reviews floating around, I may jump on board soon.

Vista ultimate x64 any chance to get decoding of dts and dolby digital for audigy 2 zs platinum

hello,
i need the support of deconding dts or dolby digital for my audigy 2 zs platinum pro.
is there any chance to get this feature back in vista ultimate x64?
i hope anybody can help me.
thanks for all
steffen

According to Creative, Vista no longer supports the decoding of Dolby and DTS at the driver level, so no, that feature proabably won't added back in the future. It is gone for all the Creative cards.

Distribution of JRE on Windows Vista Ultimate x64

The automatic update of the JRE on my Windows Vista Ultimate x64 system often comes up saying a new update is available but then as soon as I go ahead to install it, the update tells me that the particular version of the JRE is already installed.
How can this automatic update bug for new JRE installations be fixed.

iTunes cannot work if Quicktime doesn't, so that has to be fixed first.
Have you ever installed any of the following:
ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter
If so the must be uninstalled.
Then or if you don't have them then continue with this;
Download the version of QUicktime that does not include iTunes:
http://www.apple.com/quicktime/download/win.html
Remove Quicktime using the method for QUicktime in this article:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
When you get to the system32 folder, you can delete any file or folder with Quicktime in the name.
Restart your PC and then install the Quicktime you just downloaded.
Check to see if it works and if it does try iTunes.

Vista Ultimate x64

I have an HP laptop with Windows Vista Ultimate x64. iTunes installs on my PC, but everytime I open it up, this message pops up:
"iTunes has not been properly installed. If you want to burn music to CDs or DVDs, you must reinstall iTunes."
Any thoughts as to why?
Thanks.

The 64 bit Gear drivers you need for burning are not supplied with iTunes. Downloading the 64 bit driver from the Gear site usually fixes this:
http://www.gearsoftware.com/support/drivers.cfm

Serious problems after Mavericks installation with External Drive Lacie P9220.

Experiencing serious problems after Mavericks installation with External Drive Lacie P9220 1TB. Mac Finder totally locked!
I had to format the External hard drive with a Windows PC (fat32), then format again with my IMac (mac Journal.) and hopefully restored data from time machine backup.
So far so good but system looks unstable. Some software were not able to write on the hard drive.Some strange things happens. With Mountain Lion never had an even minor issue.
I read many discussion regarding problems with WD, just wondering if anyone had the same problems with Lacie and if there is any tip to solve the
problem.
Many thanks.
Marco

Thanks very much for your reply.
Unfortunately I couldn't find a solution because the article refers to whom have configured the drive with included software and drivers that came with the drive.
This is not my case, I never used any third party soft ...only OS X disk utility ...
best
marco

BSOD running Skype Video Calls on a T61p under Vista Ultimate x64

Is anyone else experiencing BSOD crashes while running a Video Call on Skype on a T61p running under 64bit Vista?
I have a 15.4" T61p, with the 570M Nvidia card, Intel Turbo Memory, and 4GB ram... the only time my machine experiences a BSOD crash is when in a video call in Skype. I have tried this with two different video camera (a MS lifecam and a Logitech Quickcam) with all the latest drivers. I have a suspicion it is some interaction between the audio drivers and Skype that may be causing the crashes... but can't be certain. Sometimes it crashes after a couple of minutes, sometimes an hour into the call.

could this problem be related to the graphics BSOD and Computer Shutoffs we are see-ing in T61p's?
have you tried running any games like Bioshock, Crisis or Call of Duty 4 ? The demo versions would be enough to tell if its the same thing.
also are both RAM slots used for your memory ?
you might want to see this thread:
http://forums.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=55
what would be interesting is this is the first time I'm hearing it crash when using video in Skype. I suppose not many persons make video calls.
T61P - 6459-CTO - T7500 2.2Ghz - 4G DDR2 RAM - NV Quadro FX 570M 256mb - 160G 7200 rpm - WSXGA+ 15.4" - Vista Ultimate 32bit

Vista Ultimate x64 Loading up slowly

On my new Unibody 2.4Ghz MBP, I had 32bit Windows Vista installed for awhile. Everything was flawless and it loaded pretty quickly.
Recently I upgraded to Vista Ultimate 64bit. Bootcamp installed all the drivers and OS is working without any issues.
When it loads, right after the initial white screen, it goes to blank screen with cursor blinking at left top. It flashes for about 2 seconds then I can see it clears, but the same screen comes back but this time it stays on for about 2 mins. This seems very odd, because soon as I get the Vista progress bar, it loads OS fast in about 10 seconds.
I defragged the drive, checked for errors. I did go thrugh regular "Make Vista Boot Faster" tricks, but they seemed to make it load faster right after I get the progress bar, but did not cure the cursor issue.
Any ideas? Thanks in advance!

1) You could get Mark R.'s Sysinternals Autoruns:
http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
and see more of what is going on at startup.
2) in Run->msconfig, I disable all but bootcamp.
3) delete all *.PF files from \Windows\Prefetch. They will come back but I've found this speeded start-up.
4) You may have "Services" running that are not needed: right click My Computer icon, selecting Manage; but need to be careful disabling those critical to startup. I disable things unused: Bluetooth & Media Center etc.
5) Let Merlin check out your PC. Copy/paste following script into new text document
and rename to Merlin.vbs. Click on it to run. Works on XP, vista etc. Won't help but may make you laugh.
strAgentName = "Merlin.acs"
strAgentPath = "c:\windows\msagent\chars\" & strAgentName
Set objAgent = CreateObject("Agent.Control.1")
objAgent.Connected = TRUE
objAgent.Characters.Load strAgentName, strAgentPath
Set objCharacter = objAgent.Characters.Character(strAgentName)
objCharacter.Balloon.Style = 1
objCharacter.Show
objCharacter.Play "GetAttention"
objCharacter.Play "GetAttentionContinued"
objCharacter.Play "GetAttentionContinued"
objCharacter.Speak "Let Me Check Out Your PC For Free."
objCharacter.Play "LookDown"
objCharacter.MoveTo 600,400, 4000
objCharacter.MoveTo 300,300
objCharacter.Play "Idle3_1"
objCharacter.MoveTo 600,25, 1000
objCharacter.Play "Announce"
objCharacter.MoveTo 300,400, 0
objCharacter.Play "Search"
objCharacter.Play "Pleased"
objCharacter.Speak "Looks Great from in Here. Cheerio, And Shazaam."
objCharacter.Play "DoMagic1"
objCharacter.Play "Idle2_1"
objCharacter.Play "DoMagic2"
objCharacter.Play "Wave"
objCharacter.Hide
Do While objCharacter.Visible = TRUE
Wscript.Sleep 40
Loop

Adding Vista Ultimate Computer to BEFW11S4 network with Windows ME and XP??

Is it possible to add a Vista Ultimate computer to a wireless network using a BEFW11S4 Version 4 running firmware version 1.50.14?
My existing network consists of a Dell desktop on Win/ME which connects wired to the router and 2 laptops on Windows XP. I previously had problems with the newer firmware version, so I downgraded. Otherwise, everything works fine.
I just got a new HP computer with Vista Ultimate. The BEFW11S4 does not show as being supported for Vista. I am confused reading other posts, will I be able to connect the new computer or not?
If not, what Router can I get that will work with all 3 operating systems?
Also, what do I need to add a wireless connection to the Dell (on Win/ME) that will work with the old (or new) router?

any of the wireless- g routers would work with the OS you have ..

Windows Vista Ultimate x64 Random B

This is for Cat, Jason or Dale or anyone that has run into this,
Quick question I booted up my computer and everything loaded fine Sound was great everything again fine! I went to play world of warcraft and the second I clicked on it BAM! Blue Screen of Death, Dump file created, computer restarted haven't gotten if it to repeat though WEIRD! I did decode the dump file so we know where to start looking.
I have a Xi-Fi Xtermegamer card running latest beta drivers.
Here is the dump:
Microsoft (R) Windows Debugger Version 6.6.0007.5
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Randy\Desktop\Mini030707-0.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
Executable search path is:
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows Vista Kernel Version 6000 UP Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Kernel base = 0xfffff800`02000000 PsLoadedModuleList = 0xfffff800`0299e90
Debug session time: Wed Mar 7 2:50:03.36 2007 (GMT-5)
System Uptime: 0 days 0:04:47.395
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck D, {20, 2, 0, fffff980098d998}
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
Unable to load image \SystemRoot\system32\drivers\ha20x2k.sys, Win32 error 2
*** WARNING: Unable to verify timestamp for ha20x2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ha20x2k.sys
*** Your debugger is not using the correct symbols ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
Probably caused by : ha20x2k.sys ( ha20x2k+c9998 )
Followup: MachineOwner
I know the ha20x2k.sys is a creative sound component I right clicked on the file and it said creative labs on it
Any ideas?

Same thing with Vista 32 bit. No need for a long note from me just to confirm that we have seen this with various set ups and can turn it off and on by just removing or installing the X-Fi with the present drivers.Yes Vista changes things and I can see why Creative is upset but we all knew that Vista was comming for months. Vista is a fact of life and actually we like it enough that we are changing over well ahead of our original schedule.As for the Creative drivers, just give us basic functions and stability, no BSOD's and communicate and we will be far more patient.

How to get bass redirection/Vista Ultimate x64/Audigy 2

This is how I got 2. sound working again (no CMSS "double"-stereo so far, which would be 4., but at least it sounds right now) on Vista x64 and an Audigy 2 ZS.
First of all, get rid of anything creative driver related (in my case, the January Beta), reboot. It should not know both the Gameport and the Soundcard. Then, run the installer with the "No driver for the Gameport found" window open. Install the Audio Console, don't reboot yet, open the Gameport window, say "look for a driver online etc." which should result in some "This inf is for Win98 and up" error. Ok, reboot. The Gameport will not work, no matter what you do ...
Go to the Audioconsole, select 5., insert your original Audigy 2ZS driver CD. Open "Audio\SpkSet", right-click the "setup.exe" and select run in compatibility mode for Windows XP SP2. Then, right-click and "Run as administrator". Should take looong (a few minutes), but it installs the Speaker Settings. You can run them from Start Menu->Creative->Speaker Settings, enable bass redirection, done. Didn't work with the beta drivers here because the speaker setting installer complained about no matching hardware found.
Note, the drivers are still WDM based (i.e., actually XP x64 drivers) and not UAA based, so the XP software finds the same hooks. Curious when a /real/ Vista driver will appear (i.e., not WDM based). See http://en.wikipedia.org/wiki/Windows_Driver_Model & http://en.wikipedia.org/wiki/Uni'versal_Audio_Architecture
Sound quality is a bit lower than on XP (it sounds as if the amplifier has some problems, when I have some bass the rest becomes quieter, which didn't happen on XP, and I have the feeling there is some high-frequency noise floating around ... couldn't equalize it yet), but I have no hickups or scratches.Message Edited by Audigy2ZSUser on 03-0-20070:5 AM

And exactly why don't you simplay use the audio console 2.40.09 which works perfectly with bass redir on vista32 and 64?

Ghost taskbar in Vista Ultimate x64 after undocking T61p with external displays

Similar Messages

Maybe you are looking for