Ghost32 image on my X61s = error message with winload.exe and 0xc000000f
hi
scuse my poor english.
i have a deployment to do with 200 notebooks : r61 & x61s.
i create a WDS server with a boot.wim and a Ghost Solution Suite Server 2.5 with images of R61 & X61s on the same server 2003.
i start my R61, boot on the F12, start WinPE, install the ghost image through the network, reboot the notebook and vista run normally, good.
i start my X61s, boot on the F12, start WinPE, install the ghost image through the network, reboot the notebooks and i have a BOSD, a reboot, and this message : Windows\System32\winload.exe is crupt or missing, Status error : 0xc000000f.
i try to repair with the vista dvd, bcdedit, /fixboot, /fixmbr, /rebuildbcd,... : same error
i try with a new ghost image, same BOSD and error
i try to install the ghost image since a USB hard disk, same BOSD and error
perhaps there is a problem with the hardware of X61s ?
thanks a lot for your responses !
Message Edited by freenod on 08-21-2008 01:26 PM
Message Edited by freenod on 08-21-2008 01:26 PM
Message Edited by freenod on 08-22-2008 07:15 AM
thanks for your response.
i have to do a deployment with 200 notebooks for a Business School.
the administrator of the Business School use a Vista Business OEM version for all the notebooks, R61 and X61s.
they give to me a R61 and a x61s with Vista and a lot of softs installed.
my job is to clone this two models and deploy the ghost image on the 198 others R61 and X61s :]
on the disk there is two partitions : in first one IBM partition hidden, in second one Vista partition.
i clone the entire disk of R61 with ghost solution suite 2.5 and my clone works perfectly with the R61.
i clone the entire disk of X61s with ghost solution suite 2.5 and my clone give me a BSOD and a reboot.
have you an idea ?
thanks
Message Edited by freenod on 08-22-2008 07:16 AM
Similar Messages
-
I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??
Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
(When you replaced the Hardisk, you should also replace the battery.)
Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
Have a nice day! -
Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0
Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser address bar and page reloaded.
Uninstalled Acrobat 9, reinstalled, still same problem.
Help please!Yes I can it only happens in the browser..
I reinstalled Windows on my machine and started over a couple of weeks ago.
When my desktop started up I didn’t have Acrobat installed and clicked on a pdf file and the open with xxx dialogue box came open.
I chose a different program as Acrobat wasn’t installed yet so it associated pdf files with another program.
Later Installed Acrobat and couldn’t associate the pdf file with acrobat so I went into Folder Options and manually associated PDF files with Acrobat.
Ever since then I get the error when something is downloaded and opened in the browser.
Works fine everywhere else and when I cancel the blank error, highlight the web address and press enter to reload it works 90% of the time.
Not sure what to do.. -
My error message with external iSight and iChat
So I am travelling for work and am at a very nice hotel in Houston. Good ethernet high speed internet.
My wife is in Germany at an Army base, other people are using Skype and chatting with people and we can't get our webcams OR audio working.
This is the error I get on my end:
Date/Time: 2007-09-16 01:18:29.935 -0500
OS Version: 10.4.10 (Build 8R218)
Report Version: 4
iChat Connection Log:
AVChat started with ID 917914215.
halcyonseven9: State change from AVChatNoState to AVChatStateWaiting.
0x9c12d40: State change from AVChatNoState to AVChatStateInvited.
0x9c12d40: State change from AVChatStateInvited to AVChatStateConnecting.
halcyonseven9: State change from AVChatStateWaiting to AVChatStateConnecting.
halcyonseven9: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
0x9c12d40: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
Video Conference Error Report:
4.011411 @:0 type=4 (00000000/22)
[VCSIP_INVITEERROR]
[19]
4.011291 @SIP/SIP.c:2447 type=4 (900A0015/22)
[SIPConnectIPPort failed]
2.009767 @SIP/SIP.c:2447 type=4 (900A0015/22)
[SIPConnectIPPort failed]
Video Conference Support Report:
3.511182 @SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.9.13;branch=z9hG4bK70de6eb8244f18f9
Max-Forwards: 70
To: "u0" <sip:[email protected]>
From: "halcyonseven9" <sip:[email protected]>;tag=741423744
Call-ID: 9c321996-641c-11dc-a53c-b8bc810913c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 546
v=0
o=stephenmiller 0 0 IN IP4 192.168.9.13
s=halcyonseven9
c=IN IP4 192.168.9.13
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:-705006232
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-428504944
2.510859 @SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.9.13;branch=z9hG4bK70de6eb8244f18f9
Max-Forwards: 70
To: "u0" <sip:[email protected]>
From: "halcyonseven9" <sip:[email protected]>;tag=741423744
Call-ID: 9c321996-641c-11dc-a53c-b8bc810913c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 546
v=0
o=stephenmiller 0 0 IN IP4 192.168.9.13
s=halcyonseven9
c=IN IP4 192.168.9.13
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:-705006232
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-428504944
2.010577 @SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.9.13;branch=z9hG4bK70de6eb8244f18f9
Max-Forwards: 70
To: "u0" <sip:[email protected]>
From: "halcyonseven9" <sip:[email protected]>;tag=741423744
Call-ID: 9c321996-641c-11dc-a53c-b8bc810913c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 546
v=0
o=stephenmiller 0 0 IN IP4 192.168.9.13
s=halcyonseven9
c=IN IP4 192.168.9.13
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:-705006232
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-428504944
1.503932 @SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected]:33929 SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK29327bdf55d370b3
Max-Forwards: 70
To: "u0" <sip:[email protected]:33929>
From: "halcyonseven9" <sip:[email protected]>;tag=1108672474
Call-ID: 9affc0c8-641c-11dc-a53c-8740a2f713c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 548
v=0
o=stephenmiller 0 0 IN IP4 m.0
s=halcyonseven9
c=IN IP4 m.0
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:-705006232
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-428504944
0.503597 @SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected]:33929 SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK29327bdf55d370b3
Max-Forwards: 70
To: "u0" <sip:[email protected]:33929>
From: "halcyonseven9" <sip:[email protected]>;tag=1108672474
Call-ID: 9affc0c8-641c-11dc-a53c-8740a2f713c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 548
v=0
o=stephenmiller 0 0 IN IP4 m.0
s=halcyonseven9
c=IN IP4 m.0
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:-705006232
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-428504944
0.003329 @SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected]:33929 SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK29327bdf55d370b3
Max-Forwards: 70
To: "u0" <sip:[email protected]:33929>
From: "halcyonseven9" <sip:[email protected]>;tag=1108672474
Call-ID: 9affc0c8-641c-11dc-a53c-8740a2f713c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 548
v=0
o=stephenmiller 0 0 IN IP4 m.0
s=halcyonseven9
c=IN IP4 m.0
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:-705006232
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-428504944
0.000000 @:0 type=2 (00000000/22)
[VCVIDEO_OUTGOINGATTEMPT]
[4]
Does anyone have any ideas that could help us? I am having her download skype to see if thats more successful but this is going to be our primary mode of contact for the next year and I am REALLY worried. We are both using external iSights and we tried audio with and without them plugged in.
Everytime either of us tries anything it gets the the stage where it says "connecting" then gives the error message.
Any help would be really appreciated!
Thanks,
Stephen MillerHi,
Hotels are notoriously difficult for iChat because of the way
1) the ports are not always open
2) the number of people sharing the connection.
For Mail you probably have POP and SMTP server set for one location and the hotel's ISP is not letting you go to those though their server. Web Mail may be the only way around this.
Ask the hotel if they have the ports open for iChat.
You may not be able to do much about the Bandwidth/user issue.
I take it you have done the Quicktime setting as you have posted before.
10:15 PM Sunday; September 16, 2007 -
That's the error message I'm getting. I keep troubleshooting my computer, and trying to troubleshoot iTunes and it's not working or coming up with anything.
I just used my iTunes yesterday and it was working fine, all I did was try to update it today and then this happened.
Now I can't even open iTunes...
Please help!Click here and follow the instructions.
(99033) -
Error message with forms 6i and OAS
Hello,
I 'm executing an applet (forms6i&OAS), while executing http://mycomputer:8001/web_html/mybase
i have the error:
keyconfailbundle oracle.forms.engine
runformbundle exception
java.lang.illegal argument exception: unknown format type...
can u please help
thnaks in advance
the applet code is the following
<HTML>
<HEAD><TITLET>titlz</TITLE></HEAD>
<BODY >
<APPLET CODEBASE="/web_frms/"
CODE="oracle.forms.engine.Main"
ARCHIVE="f60all.jar"
WIDTH="750"
HEIGHT="700">
<PARAM NAME="serverPort" VALUE="9000">
<PARAM NAME="serverHost" VALUE="mycomputer">
<PARAM NAME="serverArgs"
VALUE="module=d:\Direc\pic userid=scott/tiger@inter">
</APPLET>
</BODY>
</HTML>You will need to startup the database before you can run any sql command.
-
Sync error message with 5.1 and 10.6.1 itunes
I'm getting the "iphone could be synced because the sync session failed to start"
I have read the previous posts on this subject, which have been focussed on beta versions. This is a new problem I'm having.
I've updated to the latest iTunes offered to my MBP running 10.6.8. My itunes is 10.6.1 (7) and my iphone is 5.1 ith no updates avail.
I thought it may be due to not having enough free space on the iphone so I'm deleting many photos and voicemails, memos, etc, but deleting them is not working. I wanted to sync/back them up and then delete.
Any tips / solutions?This procedure worked well for me. For this you have to remove the device backups from iTunes. Before you remove it, make sure you backup your "Backup's" folder: ~/Library/Application Support/MobileSync/Backup/ . [for windows -c:\users\\appdata\roaming\apple computer\mobilesync\backup]
Connect your device and open iTunes
Go to Preferences/Devices
Delete all backups
Click "OK"
Restart iTunes and attempt another sync
I hope surely this works for U -
I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any suggestions on how I could kill this error message? Thanks.
iMac, Mac OS X (10.7.2)
Basically i tried to enter too much information into my calendar and it has crashed now i can not get rid of the error message or use the calendar can anyone help pleasedid you find ou how to get rid of it i can't
-
Hi Champs,
I have requirement in which I need to display an error message in SRM Portal.The error message is maintained in the SAP SRM system and can be viewed through SE91.
We are using SRM 4.0 Version.
I need to display the below error message with a hyperlink to a particular site:
Profit Center of plant and CO do not match, CO belogs to plant XXXX (item link)"
Is it possible to have hyperlink with an error message.
Thanks
Regards,
NishantHello
It is no possible.
But you may add hyperlink into documentation for message (SE91 -> Goto -> Documentation -> Long text).
In this case hyperlink will be available after double click on error icon in left bottom corner.
PS: and not duplicate posts. -
Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa
Moved thread to Android development.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
That's why i am interested on anyone's help.Welcome to the Apple Support Communities
I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html -
Displaying an error message with a link to the error field
By default, ADF validation usually displays an alert with an error message and a link to the error field.
I have some custom validations where I finally display the error message with this:
public static void MessageError(String messageText){
//String messageText="No se han encontrado estos datos";
FacesMessage fm = new FacesMessage(messageText);
* set the type of the message.
* Valid types: error, fatal,info,warning
fm.setSeverity(FacesMessage.SEVERITY_ERROR);
FacesContext context = FacesContext.getCurrentInstance();
context.addMessage(null, fm);
My customer is asking for displaying a link to the error field in this kind of error alerts as standard errors do.
Is there any way to get this ?Can't you include this in your message?
You may want to check Duncan's blog https://blogs.oracle.com/groundside/entry/get_more_from_your_messages whichgives more inside on what you can do
Timo -
My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?
Did another window open with the pasted information? If so, try hitting "enter/return" key and "delete" key at the same time. That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.
-
Error Message with multiple line
Hi
How to display a error message with multiple line?
Example
Goods movement not possible for material 101
Goods movement not possible for material 102
Goods movement not possible for material 103
is it possible is ABAP? If so please advice me.
Best Regards
AsheekHi Anoop,
You can use same thing like this
I suggest write ur message through this.
First set the obecj.
CALL FUNCTION 'APPL_LOG_SET_OBJECT'
for local memory
FUNCTION 'APPL_LOG_WRITE_MESSAGES'
EXPORTING
OBJECT = OBJECT
SUBOBJECT = SUBOBJECT
UPDATE_OR_INSERT = UPDATE_INSERT_FLAG
TABLES
MESSAGES = MESSAGE_TABLE
EXCEPTIONS
OBJECT_NOT_FOUND = 1
SUBOBJECT_NOT_FOUND = 2
OTHERS = 3.
the call for physical memory
CALL FUNCTION 'APPL_LOG_WRITE_DB'
In this process you only need to provide the Itab with error messages.
Reg,
Arpit -
I try connecting to I tunes i get an error message with the error message IxE000068 any ideas
my ipod touch will continually be in the spinning wheel like it is shutting down mode and occasionally go to the start up screen nothing else. i tried connecting to the itunes and got an error message with the code IxE8000068 and saying itunes could not be connected to this ipod
Did the error number really start with
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
Maybe you are looking for
-
Multiple Apple IDs = Songs Not Playing on my iPhone?
Due to multiple Apple IDs, some of my purchased songs won't play on my iPhone. Is there a way to sync them so they all play? I bought them, afterall...
-
How to handle binary file at the time of import in javacvs
hi , I am using netbean api for cvs command.I am having the same problem that i am not able to open binary file after importing in cvs repository. I want to import a directory which contain both text and binary file. can you please hel me out to how
-
I need a vi for LabView 5.1.2 that when run will retrieve all the channel information from Max
I know there is a vi example for 6.1 to do this exact thing and create a text file as well. But I do not have 6.1 on the machine I want to extract the data from. Is there a similar program for 5.1.2 that has been created that someone can share with m
-
Can't create PDF file from Browser Window
Hi, I used to use Acrobat extensively (but not recently) to create PDF files from various websites. Today when I tried to do it from IE and from Chrome I found out that the ability to do that is no longer there. I cannot figure out why it disappeared
-
How to use AT new instead of ON CHANGE OF as it is obselete.
How can I use two at new stmt in the below code ? LOOP AT gt_869_input_rec_final INTO wa_869_input_rec. IF wa_869_input_rec-rec_type = '10' AND wa_869_input_rec-selection = 'PP'. CLEAR : lv_canc_date, count. REFRESH : r2_shipto, r3_vbeln. *------As