Ghostly figure when trying to clone with green screen

So i was messing with the green screen feature on imovie by putting two videos of myself together to get the cloning effect. The only problem is that when i do this my other self looks ghostly. he seems to be transparent into the other video. So i looked up online how to fix this and people said to swap the videos but this also didnt help. now the other video looks ghostly and transparent into the other video. i also rerecorded it multiple times with the same effect. to record this i am using my isight on my macbook pro. is there a way to make the videos more solid and not bleed or be transparent into each other? and yes i did crop it and one of the videos were still ghostly looking.

When cloning and putting two figures side by side you do not need a green screen. there are many videos of people doing it on youtube without a green screen

Similar Messages

  • When trying to work with Agilent 34401A multimeter (serial RS-232 connection), HP34401A Getting Started.vi gives always the message: "Error 1073807369 occurred at Old VISA Open ".

    Baud rate and parity are set correctly, RS-232 cable is also connected correctly. My QuickBasic program has no problems to read and write to the Multimeter. It is obviously a software problem: the same error is persistent if I disconnect RS-232 cable.
    I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm digital.ni.com and installed it. But it did not help.
    Thank you in advance
    Best regards
    Alexei Soloviev

    Hi Steve
    I have problems with the 34401A and serial communication. Do you remember
    where the error was in the code ?
    Thanks
    Klaus
    wrote in message
    news:[email protected]..
    > Alexei,
    > This may or may not help, I was tasked to do something similar
    > recently and found an error in their driver. The GPIB VISA worked
    > fine, but when I tried it on serial it played up. There was an errant
    > carriage return (or CR/LF I can't remember). GPIB liked one and Serial
    > liked the other. It always amuses me that we never have problems with
    > Quickbasic!.
    > If you want me to dig deeper give me a shout.
    >
    > Steve Watts
    >
    > On Thu, 24 Jan 2002 06:16:55 -0800 (PST), "Alexei V. Soloviev"
    > wrote:
    >
    > >When trying
    to work with Agilent 34401A multimeter (serial RS-232
    > >connection), HP34401A Getting Started.vi gives always the message:
    > >"Error 1073807369 occurred at Old VISA Open ".
    > >
    > >Baud rate and parity are set correctly, RS-232 cable is also connected
    > >correctly. My QuickBasic program has no problems to read and write to
    > >the Multimeter. It is obviously a software problem: the same error is
    > >persistent if I disconnect RS-232 cable.
    > > I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm
    > > digital.ni.com and installed it. But it did not help.
    > >Thank you in advance
    > >Best regards
    > >Alexei Soloviev
    >

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • Getting error 789 when trying to connect with a PC remotely via VPN

    When we set up the VPN we are getting a Error 789 when trying to connect with a PC. Any suggestions would be appreciated.

    The utilities, provided on the CD, are not required for the PC to access the Internet through the 802.11n AirPort Extreme Base Station (AEBSn). They are only necessary for administering the base station.
    If your PC is currently configured as a DHCP client, it shouldn't have any issues connecting by Ethernet. The AEBSn will assign the appropriate IP addresses required for connectivity to the Internet ... just like it does for wireless clients.

  • I am getting an error msg when trying to sync with I Tunes???

    I am now getting an error msg (0xE8000065) when trying to sync with I-Tunes.  This just started today
    Also would like to know how to find my passcode for Restrictions without restore the whole phone.

    I am now getting an error msg (0xE8000065) when trying to sync with I-Tunes.
    http://support.apple.com/kb/TS3221
    Also would like to know how to find my passcode for Restrictions without restore the whole phone.
    Not possible, and since the Restrictions Passcode is included with your iPhone's backup, you must restore the iPhone as a new iPhone or not from the backup.

  • IPhone 5 error 4005 when trying to update with itunes

    iPhone 5 error 4005 when trying to update with itunes

    Hello mjy75, 
    Thank yoj for using Apple Support Communities. 
    The following article covers error 4005 when updating your iPhone.
    iOS: Restore errors 4005, 4013, and 4014 - Apple Support
    Regards,
    Jeff D. 

  • Itunes 10.5 freezes when trying to sync with iPhone 4

    My itunes 10.5 freezes when trying to sync with iPhone 4.
    When i disconnect the iphone itunes unfreezes instantly.
    Where is the problem?
    Ipad syncs with no problems.

    I am having the same issue
    Itunes 10.5 freeze when I connect my Iphone 3GS
    I found a solution is to remove the podcast from my iphone and then it work immediately
    But this is anoying to allways remove my podcast from my iphone
    I will try your solution to way a long time and see if the problem resolve by itself I keep you posted of my results

  • What is error 4002 when trying to sync with Itunes match and how do I fix it?

    What is error 4002 when trying to sync with Itunes match and how do I fix it?

    HI
    Read this How to troubleshoot iTunes Match - Apple Support
    Note specifically holding option ket whilst turning off match.
    Jim

  • HT4539 My 3g iphone has lost all data when trying to sync with itunes, put icloud for ipad and iphone but didnt allow to sync with computor as not very techy!Thought if messed up it wouldnt effect computor! Now Phone not responding to icloud to collect da

    My iphone has lost all data when trying to sync with my computor.
    I have an pad with most info on, but not keen to sync with that incase that data gets lost!
    I joined icloud but cannot retreive from there as its not accepting my icloud account! Help!
    If I sync phone with ipad is it likely to work safely to retrieve info as both are apple devices?.

    ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

  • IPhone 4s reboots many times when trying to sync with iTunes

    iPhone 4s reboots many times when trying to sync with iTunes.
    Since IOS 8, my iPhone 4s reboots many times when trying to sync with iTunes on my Mac. It will start running the backup and reboot, it will reboot many times when updating packages. It can take 12 hours to finish a sync with the mac. The phone gets hot during this. I keep deleting more and more pictures and apps, hoping that maybe it doesn't have enough space, but iTunes shows I have 4.9 Gbytes free, which I think should be enough.  I am on IOS 8.0.2, I thought maybe I would try to upgrade to the latest IOS today, but I am worried that I will end up with a non working phone.
    Is anyone else having these problems?
    Ed

    Well thats Od... I have never experienced that problem.. Maybe you should try to backup your phone and then wipe it by going to Settings<General<Reset

  • TS3697 when trying to sync with my itunes, i get error message -69

    when trying to sync with my itunes, i geterror message -69

    Hey casper808,
    Thanks for the question. The following resource outlines this exact error message along with applicable troubleshooting steps:
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    Thanks,
    Matt M.

  • For some reason, even though I have advanced features checked, the menu with green screen and all those isn't popping up when I drag the video on top of another one.

    For some reason, even though I have advanced features checked, the menu with green screen and all those isn't popping up when I drag the video on top of another one. Help?

    Hi
    I would trash - iMovie pref file - and re-try - sounds like this got faulty.
    • Delete iMovie pref. file. iMovie pref. file resides.
    Mac Hard Disk (start-up HD) / Users / "Your account" / Library / Preferences
    and is named. (one or more of these)
    com.apple.iMovie.plist
    com.apple.iMovie3.plist
    com.apple.iMovie7.plist
    com.apple.iMovie8.plist
    com.apple.iMovie9.plist
    com.apple.iMovieApp.plist
    and find
    com.apple.iApps.plist
    While iMovie is NOT RUNNING - move this/these file/s out on to desk-top.
    Now restart iMovie.
    If You run Mac OS X.7 or more - then the Library in the User-account folder is invisibly and need to be set to be viewable. IT IS NOT in the Library on Root level (when opening MacintoshHD - first window = root level)
    ( It can be done like this: Open Terminal, then enter:
    chflags nohidden ~/Library (exactly like this - space included)
    Press return, then restart, and it will always be visible until the next major update, when you do the same thing again. )
    Yours Bengt W

  • I can connect to iTunes on apple TV, but get "invalid I.d. Or password" message when trying to connect with iPad or iPhone.  What the...?

    I can connect to iTunes on apple TV, but get "invalid I.d. Or password" message when trying to connect with iPad or iPhone.  What the...?

    Hi Boscoboi,
    Welcome to the Support Communities!
    You may need to check the settings for your iTunes Store on the iPad and iPhone.
    Sign out of the iTunes account, restart the device and sign back in.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311?viewlocale=en_US
    If these basic steps don't resolve your issue, then follow the advice in this article for connectivity issues with iTunes:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    - Judy

  • Error when trying to chat with more than one perso...

    I am getting an error when trying to chat with more than one person at a time.
    The message is like below:
    There has been an error while proccesing.
    Do you want to start debugging.
    Row: 0
    Error: No authorization
    Thank you in advance for assistance.
    Kind Regards
    Marcin
    Attachments:
    error.jpg ‏12 KB

    What is the version of Internet Explorer installed on your computer?
    In Internet Explorer go to Help -> About Internet Explorer.
    P.S. Please, don’t say that you are not using Internet Explorer. This is irrelevant. Skype depends on Internet Explorer.

  • Safari for Windows crashes when trying to interact with bookmarks

    Hello, I've installed Safari for Windows but when trying to interact with bookmarks, it crashes everytime.
    Trying to view, create or import bookmarks all wield the same result: instant crash.
    Can someone help ?
    Thanks!

    Just to try, I copied the en.lproj to es.lproj in every subfolder on Program Files/Safari, this because I have a Spanish (Mexico) regional setting, and after a Safari restart, bookmarks now works and even imported my info from IE and Firefox. This also worked me for other issues. More details in:
    http://discussions.apple.com/thread.jspa?threadID=993697&tstart=0

Maybe you are looking for

  • How to Add a new fields in the selection screen of LDB.

    Hi All, I want to add a new fields in the selection screen of LDB & then i need to select the data for that fields. So could you please tell me for that where i need to add the code for selecting the data. Thanks Roli

  • PDF viewer into new browser window

    Hello, I use following code to open new browser window with PDF file. The URL passed to the method is link to SICF service which returns the PDF in the request with content-type = 'application/pdf'. New window is open with correct URL, but the conten

  • Please fix the Robohelp bug related to supporting underscores (_) in the help files (*.chm)

    There are 10 module specific projects. Further map IDs are assigned in all the 10 module projects to have context sensitivity. These are merged into a single project to generate the entire help file. The output for the project is html help (.chm). In

  • I want to add timing in my program

    my program wants to run between specified time 5 mins or  10 mins.. it should be chosen manually please help me to add this  kindly help me frndz Solved! Go to Solution. Attachments: GetIPStatus- latest (1).vi ‏30 KB

  • User not displayed under a Group

    HI All, We are using BOXIR2 SP2 with .NET and have configured Windows AD authentication. A user belongs to multiple groups. Some times a user may belong to 14- 20 groups. All these groups are added in CMC. The issue is when I do a manual update of th