GI to scrap from quality stock can't be cleared from SType 999 in WM

Hi All,
My process goes like this. Creation of return sales order followed by a returns delivery.
I have to use QM along with WM for this process.
The returned stocks are going for Quality Inspection. If it is good it goes to unrestricted stock. If it doesn't pass the quality it is scrapped.
Unrestricted posting works fine but I'm getting problem in Scrapping part.
I have posted 'GI for scrap' from the quality stock through Usage decision in QM.
I can see the movement type 553 in IM and 551 in WM being used but the posting seems to hung in 'LS26' Tcode
It shows something like this
Plant     Sloc           stock category   Storage type            Available stock
3000     0089               Q                       904 (Returns)             1
3000      0089              Q                        999(Differences)        1-
Now the stocks in 904 and 999 should become zero.
I tried LI21 Tcode but it ends with error saying " Change the inspection stock of material XXXX in QM only"
Please help.
Thanks,
Murali

Hi
It would appear that then scrapping has already been done and that is why you have the negative in 999
You now need to get then positive from 904 into the negative in 999 to balance the stock
Have you got a Posting Change Notice that needs to be actioned
You will find this in LU04. Also selet partially procesed so that you see all of the PCN's that have not been done
Create a TO for this PCN and the TO will clear the issue
I hope that this helps
Frenchy

Similar Messages

Mass Transfer Posting From Quality Stock to Return Stock with FI Effect

Dear Gurus,
1 Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
2 Effect of Financial Entries eg Cost ?..
Thanks & Regards
Darvesh

Hi Shoib,
Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
2 Effect of Financial Entries eg Cost ?..
Sol: 1 ans is No. You Can not transfer a 1500 material from quality to unrestricted stock, Cause the Transfer of material is based on Either PO or material doument
If you still want to do it Chek with your ABAper to develop a BDC wich can transfer the material and or each PO it should crreate a Accounting Document

Weird Problem in QM stock posting from Quality Stock to Unrestricted

Hi all,
Today I hit a weird problem in SAP and struck there for the past 5 hours. The problem is,
I have a batch managed material, for which QM view is available. 01 inspection type is activated along with the "Post to Inspection Stock indicator" for that material in material master.
Now I am creating a Purchase order and doing a goods receipt in MIGO. Then it creates a inspection lot of type 01
for this material and puts the stock in to Quality stock (I checked in MMBE).
Now as per standard SAP behaviour, if I want to move the stock from Quality to Unrestricted, I can only do it in QA11 trasaction through Inspection stock tab. If I try to do 321 (Quality to Unrestricted) movement in MIGO, the system will send an error message "Change the inspection stock of material XXXXXXX in QM only"
But in my case, I am not getting this error message, the system is still allowing me to move the stock from Quality to Unrestricted thorugh MIGO using 321 movement. This is not standard and I don't want this.
This behavior is seen in 04 and 08 inspection lots also (with post to insp stock indicator).
The aftermath of this problem, if I do a MIGO transfer posting of say 100 PC through 321. The system is correspondingly updating the MMBE transaction by moving this 100 PC from Quality stock to Unrestricted. But if I go to QA11 and check, the QM still shows that 100 PC to be in Quality stock itself, thus creating a mis-match between actual stock situation and the stock situation in QM.
I already checked and most of the SPRO nodes and I am left clueless. One more thing, Usage Decision is not yet done for the inspection lot and it is just REL status. Also thee are no developments or enhancements in QM module in my project. Only 1 enhancement relating to custom sample label and rest of all the functionality is standard.
Sorry for the long post. How to correct this? Please help me!
Thanks in advance,
Vinodh

I don't know why this happenned. Look at the QM view of the material master and see if the "inspection setup" flag on the QM view is clicked on. That is usually greyed out and is set by having an inspection type activated. You can't manually set that once an inspection type is added. But that is the indicator I believe is used to determine if regular stock movements are allowed for QM stocks.
I would try to first clear all your inspection lots first.
Then delete all the inspection types from the material. And I mean actually go in and delete them.
Then use QA08 to reactivate the ones you need.
Then see if this solves the problem.
FF

I receive numerous messages in "Bulk Mail". Where do they come from and how can I prevent them from being received? Thanks

I receive numerous messages in "Bulk Mail". Where do they come from and how can I prevent them from being received? Thanks

Once you're on a spammer's list, there's nothing you can do to stop the flood of e-mail messages. You can either control it, using spam filtering (which is what files those messages in the Junk Mail folder), or you can throw out your e-mail address and get a new one.
It's sad, but spam is simply a fact of life at this point, and there's nothing to be done about it. Legislation has been tried, with zero success, since most spam either comes from countries with no legislation or from personal computers that have been infected with malware and are part of a "botnet."

Hi we have apple credentials for downloading OS and creating Provisioning profiles. Now we are trying to upgrade the Mac OS 10.7.3 version. do we need should buy this version from appStore. or can it be download from the apple site for free? Many thanks

Hi we have apple credentials for downloading OS and creating Provisioning profiles. Now we are trying to upgrade the Mac OS 10.7.3 version. do we need should buy this version from appStore. or can it be download from the apple site for free? Many thanks in advance!

Whether you need to buy Mac OS X 10.7.3 depends on what version of OS X you have now.
If you have OS X 10.6.x or lower it is a paid upgrade from the Mac AppStore.
If you have OS X 10.7.x it is a free upgrade you get using Software Update on your Mac.

Looking for bright ideas for moving address book from MacBookPro that can't be upgraded from OS 10.5.8 (big bummer!) to iCloud and iPad2

Looking for bright ideas for moving address book from MacBookPro that can't be upgraded from OS 10.5.8 (big bummer!) to iCloud and iPad2

Have you tried exporting the contacts from address book on your mac to your desktop and importing them into the iCloud contact file using the import command from the menu when you select the gear icon.

I know this is supposedly not possible, but I need to retrieve a specific voicemail from my iPhone which was also "cleared" from the Deleted Messages box. Any suggestions?

I know this is supposedly not possible, but I need to retrieve a specific voicemail from my iPhone which was also "cleared" from the Deleted Messages box. Any suggestions?
This is highly important. I know the number from which the voicemail arrived, but have not been able to figure out how to retrieve it. I accidentally had the voicemail in the Deleted Messages folder, and then Cleared this folder. If there is any possible way I might be able to retrieve this message, even if there is a cost associated with it, please help me.
Thank you.

I think you maybe able to restore from backup if that voicemail was included in the backup. http://support.apple.com/kb/HT1766

From Quality Stock to free stock

Where i can change the kind of stock for a material. I mean, i have 10 units of Material A in quality stock and i want to use this stock in a 201. How can i change it?
Regards

Dear Jorge,
There are following 2 ways to resolve your problem:
1.If 10 units of material were procured and Stock were posted to Quality stock.One Inspection Lot would have generated.Now,You need to first find out inspection Lot and record the results and finally record Usage decision.Steps are as follows-->
a) Search Inspection Lot using T code -QA33 by selecting relevant parameters e.g plant,material,date etc.
b) Record result using T code -QE51N by selecting tab Inspection Lot number and enter the desired Inspecction lot number(searched in first step)
c) Record usage decision using T code-QA11.Allocate Usage decision code from drop down list e.g "Approved" in case of free stock.You may not find "approved" UD as it might be given different name but idea is that you have select the UD code which make the stock free for use.
2.You can post transfer posting using Tcode -MB1B and 321 movement type.
This is how stock could be transferred from Quality Inspection stock to un-restricted stock(free use).
hope it helps..
Regards,
Vineet

QM: How to Move material from quality stock to unrestricted stock

Hi,
How to post material stock from quality to unrestricted without using 321.
Regards,

Hi,
if you have quality management active then you have to mainttain quality view in material master along with the inspection lot settings. now this will result in quality lot creation at the time of GRN. then you have to execute QA32 and get the lot. make usage decision and there you will find tab with lot quantity. there you have to give qty in unrestricted and save it.
if you dont have it then just do the transfer postingeither through MIGO or MB1B with movement type 321. give the mat. plant str loc. qty and save it.
regards,
Adwait Bachuwar

I purchased an album from amazon, how can i download it from Amazon cloud to my itunes on my iphone

I purchased an album from Amazon on my iPhone last night. The album is in Amazon Cloud and I have downloaded it to my device. The album, however, does not show up in my iTunes on my phone, I can only see it if I go into Amazon Cloud Player app. Is there a way I can transfer those songs from Amazon Cloud Player to my iTunes music app on my phone?

You can get the Amazon app for your iPhone: https://itunes.apple.com/us/app/amazon-cloud-player/id510855668?mt=8
However, this will not add the music to your iTunes library. You will need to use it for your Amazon music and the iPhone built in Music app for your iTunes music.

Not able to clear material from quality stock

Hi,
There is a stock inconsistency between inspection stock in materials management and inspection stocks managed in inspection lots.Due to this, unable to clear inspection stock. I tried with QA08 ,MB1B also assiging inspection type 08 but still posting not happening fron inspection stock to unrestricted stock.
Regards,
Ravi

Hi Ravi,
Please note / clarify following :
1) If in material master of QM you have activated post to inspection (no lot generation with 01 or 04 type insp) then stock will appear in quality, and you should or can only clear it using MB1B 321 movement type.
2) If already you have activated 01 or 04 or 08 then you will be allowed to post stock through inspection only (QA11).
3) Check one more important point :
From old lots somebody might have done result recording and given UD but forgot to do stock posting. you can find such lots with status 'SPRQ'. go to QA32 put particular material, remove range dates and select all insp lots. from the list apply filter to column 'system status' check for ' SPRQ ' in the filter. you will lots where UD given (green radio button) but stock posting pending.
Please elaborate if problem if not resolved.
Best Regards,
Shekhar

Is there a way from where I can restore my profile from a back-up that I took from a folder (e.g \Local Settings\Application Data\Mozilla\Firefox\Profiles\)

Before re-installing Firefox 19, I mistakenly took backup of my profile from a folder - C:\Documents and Settings\garan14\Local Settings\Application Data\Mozilla\Firefox\Profiles and not from C:\Documents and Settings\garan14\Application Data\Mozilla\Firefox\Profiles.
While installing, I selected "Delete the old profiles" option and I don't see any old profile folder under C:\Documents and Settings\garan14\Application Data\Mozilla\Firefox\Profiles.
However, I have a lot of important data saved under that profile which now has got deleted.
Is there any way I can still restore the data from old profile? (P.S.: As mentioned above, I have a back-up of profile folder which resides under Local Settings folder)
I am in a desperate need for the help. Pls reply as soon as possible.

i have some problem. i delete firefox profile and i cannot use mozilla right now. can you help me ? thank you

IOS7 Notification center - Missed Tab can not be cleared from missed calls

Not sure if it si a bug, when you recieve a missed call, in notification center you cannot clear your missed calls at all.
Please advise

Hi,
Is there any event message on Front end and workstations?
Please update .NET 4.5 and test the issue again.
You may refer to the similar case:
http://stoknes.wordpress.com/2013/01/24/lync-server-2013-and-enterprise-voice-issues/
http://msunified.net/2013/01/09/cannot-complete-the-transfer-in-lync-server-2013/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Please also contact Cisco support to check SBC configuration.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Bought Macbook Air from India. Can I purchase AppleCare from US?

I have bought MBA 13 from India.
I like to buy AppleCare from B&H - http://www.bhphotovideo.com/c/product/582542-REG/Apple_MC246LL_A_3_Year_AppleCar e_for_MacBook.html
Can i buy and use it to extend my warranty?
Apple support said yes..
but many forum claims .. we can't.. do that

AppleCare can only be purchased within one year after the original sale. It must be purchased before the one year standard warranty expires. Anyone can purchase it unless the seller has already purchased it. Then it is available to you since the warranty travels with the computer, not the owner.
A big risk buying on eBay is that you may get a stolen computer or possibly nothing. Take care.

TS3999 my calendar was deleted from my phone, can I restore it from icloud?

My calendar was deleted from my phone, I went to icloud.com and it was also blank. My phone is not backed up to my computer Is there any way to recover my calendar? :{

Hello Amanda,
Your iTunes application or your iTunes library content?
If just the application was removed, you can redownload it from here.
http://www.apple.com/itunes/download/
B-rock

GI to scrap from quality stock can't be cleared from SType 999 in WM

Similar Messages

Maybe you are looking for