Gibberish before windows loads - Tecra M4

i have a Toshiba Tecra m4 laptop.
when i turn it on, i get a Toshiba welcome screen followed by total gibberish.
then Windows starts to boot with blue stripes going across the screen. after that i get a blue screen of death.
Windows does, however, boot into safe mode with lines going across the screen.
i have tried entering BIOS but it is all gibberish!
i have updated video driver but still have the same problem.

Hi
If the safe mode doesnt help I recommend you to save all your data and reinstall the unit using recovery media. If the problem persists there is probably some serious hardware problem.
After using recovery media the OS will be clean preinstalled and there should not be any problem.

Similar Messages

Setting/Getting Parameter Values BEFORE and AFTER the param window loads

Hi there. My name is William Sanchez. I posted this question on Brian Wheadon's blog because I'm not sure that what we're trying to accomplish can be currently done with 2008 Crystal Report Viewer and was wondering if a future version will support this, or if we're just missing something. I've searched through the SDK and API and can't seem to find a solution. Here's what we're trying to accomplish
In a nutsheel: we think we need to hook into Crystal Report Viewer's parameter window from our WPF app.
What we need to do is to be able to pass a set of default values to our parameters AND, after that's done programmatically, still display the parameter window for the report. Currently, however, after you do:
parameterFieldDefinition.ApplyCurrentValues(currentParameterValues);
it's as if Crystal says: Ok, we got the value, there's no need to show the parameter window anymore. This makes sense, but we need to still be able to show the parameter window to the user because all we did (from our point of view) is to pass in a default "choice". If we were to call ApplyDefaultValues() instead, the actual choices for the parameter are overriden. We basically want to make a default choice for the user from the allowed values for that parameter. But we want to still present the parameter window with the default choice already selected, plus all the other choices available for that parameter. If the crystal report has parameter1 set to false as default, we might want to programmatically set it to true, but still show false as an option on the parameter window.
Part 2 of what we'd like to accomplish is that after the user changes any of the parameter values, and clicks OK to view the report, we'd like to catch the new parameter values in code to do something with them.
This is why we're thinking of hooking into the parameter window so that we can tell it what we want both BEFORE it loads and AFTER the user is done...just like we can hook into the CrystalReportViewer refresh button like this:
CrystalReportsViewer.ReportRefresh += new CrystalDecisions.Windows.Forms.RefreshEventHandler(CrystalReportsViewer_ReportRefresh);
Our app is a WPF C# .NET 3.5 desktop application. Any assistance or direction will surely be appreciated.
Kinds Regards,
William Sanchez
Edited by: wsanchez78 on Mar 31, 2010 1:20 AM

Good day Ted, thanks for your reply.
I did try Parameter.Default value, but what it does is as I mentioned above. If I have Parameter1 as a boolean, with possible values of true and false, if I set Paramter1.Default = true, the parameter window does come up, but it removed the false option from the drop down. So this is not a way to pick one of the various values for Parameter1, but to default it to only one of the values. It's close to what we need, but not fully.
Also, what are your thoughts about getting the parameter values after the user has made their changes to the CrystalReportViewer parameter window and click OK to pass them to the report. How can we programmatically get those new values?

I've downloaded Lightroom 5.6 today but it won't completely load before windows pops up and says that it has encountered a problem and is shutting the application down. What is my next step....thanks?

I've downloaded Lightroom 5.6 today but it won't completely load before windows pops up and says that it has encountered a problem and is shutting the application down. What is my next step....thanks?

If you use extensions like Adblock Plus or NoScript or Flashblock that can block content then make sure that such extensions aren't blocking content. 
You can see the installed Firefox extensions in "Tools > Add-ons > Extensions".
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Bluetooth before Windows 7 loads

Dear All,
I sent off my IQ507 to be upgraded from the original Vista to Windows 7 Professional. My tech did a great job, but was surprised by the 2.4Gh radio dongle (not Bluetooth) embedded in the case. He broke it, and that was the end of my original wireless keyboard and mouse... HP does not sell the dongle separately, and a new complete set would have cost us about $70.
I had noticed that my WiFi signal was spotty anyway, and since the computer also has Bluetooth built in, I figured I would use the opportunity to upgrade to a Bluetooth keyboard and mouse. I figured that having one less radio transmitter in the room could help with the WiFi, and it DID! My signal now makes it through the walls better.
Anyway, I do have a small issue remaining. The old non-Bluetooth dongle was connected by USB, and it made my keyboard available during boot in case I wanted to enter BIOS setup. The built-in Bluetooth transmitter only turns on when Windows 7 is running. I can't enter BIOS setup, and I cannot wake the computer from sleep using the keyboard or mouse.
I don't have a USB keyboard to experiment with, but I'd buy one if someone out there can assure me that there is a way to enable the built-in Bluetooth in BIOS, so that the new keyboard will work during boot and to wake the machine from sleep. Has anyone found documentation on this, or would you be willing to explore your BIOS for me to see if there is a setting? Logitech (maker of my keyboard) informed me that for USB devices there is a "Legacy USB Support" setting, but it appears that our built-in bluetooth does not go through USB.
Thanks!
David
David

I think a program is trying to execute before windows is booting up,what apps are present in your startup item list? Press msconfig in the search box of the start menu and check the programs list which run on system startup
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Why does pogo hearts game window load very slowly

I ave Vista and the latest versions of Firefox and Java.
I had no problems with the previous Firefox version.
It was 9.0 or something like that.
In fact I would like to go back to that version .
When I play Pogo hearts the game room loads but,
the game window loads very, very slowly.
I get booted out before the game starts.

I have firefox 3.6.12 as well, but windows xp pro, sp3. plus : comodo internet security free. I took NoScript off and all my add-ins.
Firefox used to load in less than 5 seconds on startup and/or reboot. Now it takes up to 30 seconds to load. Once Firefox has been run once since it's first run in a Windows session, it loads fast (3-5 seconds) like it used to.
I completely removed Firefox, deleted the mozilla folder, did a fresh download of firefox 3.6.12 and installed it. NO add-ins except Adobe Acrobat and the ones that come with a fresh download of Firefox.
Still WAY slower than it was with previous versions.
I really liked the old Firefox. And I was running Comodo Internet Security Free then too. And I removed that and re-installed a fresh version. Nothing makes it start up the first time in a reasonable amount of time like before.
What gives??????

Windows loads and restarts loads and restarts!!!

recently I had a problem where I could not increase the partition size on my boot camp disc. I had to re format my entire hard drive and reinstall osx and then boot camp.
When I installed bootcamp everything worked fine well I thought. under boot camp... windows loads up. and within a few seconds of it finished loading, it automatically restarts and does it over and over again. I can't stop this from happening.
FYI... it did this one time and I reloaded windows and the same thing happened again!
Please help!
Message was edited by: sseligson

Hi! I had read about your problem before I installed so I was waiting for it! I have just installed a licensed full OEM version of Windows XP with SP3 included on the single disc. Sure enough it started reloading everything as you noted. Rather than stop it I waited until it asked me where I wanted to install it and I chose my previously formatted 60 GB NTFS partition. It then told me there was something already installed on that. I had the open of reinstalling or quitting. I chose Quit and restarted the computer. Seems all OK. I have since connected to the internet and mail and have "Activated" Windows. I guess you have sorted this out by now but if not hope it helps! (Please note I have not downloaded Bootcamp 2.1!!

Satellite P100 - 429 A3 Turning off when windows loads

Heya. This is a serious problem that has rendered my Notebook unusable. I was just wondering if anyone knows what it is.
I was in a source game when it happened for the first time, I jumped in the game and the laptop just cut out. No shutting down, it just turned straight off as if someone had held the power button. I stared at it for a minute then powered it back on. It seemed to go fine, I thought it was just an odd hiccup, but then after it had finished the windows loading screen, it did exactly the same thing. Now every time I start up, it get's past the loading screen and sometimes it get's to the Welcome message, soemtimes before the cursor is even loaded it will turn off in the same mannor.
The only things I have recently changed is the BIOS (which is my obvious suspicion.) I was just browsing the Toshiba website drivers page and I found a BIOS update for my Notbook cliaming that it had been improved. So I downloaded and installed it, once the installation had done it's job the Notebook restarted, but on first run Windows bluescreened before it had even loaded. Then after that it was working fine until now.
I also tried to use a Windows disk to do a recovery of windows. However, the recovery console caused the same thing. Within a few seconds of initializing, the computer just cut out.
If anyone has a clue what's goind on, please let me know.
Sorry for any typos, I'm not on a familiar keyboard.
Thanks again.
Wolfy

> I jumped in the game and the laptop just cut out. No shutting down, it just turned straight off as if someone had held the power button.
Well, this sounds like an overheating issue. Fact is that all internal devices run with a full performance during the game playing. This leads to a high temperature inside the notebook. If your ventilators are not free due to the dust and debris then the notebook will shouts down to prevent the hardware from damage.
In such cases the fan cleaning is necessary and advisable.
I have had a similar issue on my notebook and solved it using an compressed air spray!
In my knowledge the Sat P100-429 belongs to the PSPA3 series.
You should really be 100% sure that you use the right BIOS.
However, its also possible that the notebooks hardware malfunctions.
In such case the hardware check is needed. Such test can be done by an authorized service provider in your country.
Good luck

I rented a movie for Apple TV via my Mac months ago. SInce than when I go to open itunes...it quits before anything loads. HOw do I fix this?

I rented a movie for Apple TV via my Mac months ago. SInce than when I go to open itunes...it quits before anything loads. HOw do I fix this? I haven't been able to use itunes on my computer since than!

Rented movies downloaded to an Apple TV can't be transferred to any other device.
(86941)

Black screen before windows xp

i just bought a nForce2 MS-6729 motherboard and a Powmax case and i put all my components together which are:
400W Power Supply
AMD Athlon XP 2400+ 2.0GHz
GeForce FX 5200 128MB AGP 8X
SoundBlaster Audigy Gamer
2 256MB DDR PC2100 Samsung
1 256MB DDR PC2100 Generic
Liteon DVDRW LDW-451S
Western Digital Caviar 100GB 7200 SE
Western Digital Caviar 120GB 7200 SE
The problem i am having is that when i cleared my primary drive off and reinstalled windows xp it had a halt, i sat there and waited for 5min while i was at the blue screen with "Setup is loading Windows". Then it finally installed, after the installed and the bios came up and then the IRQ screen came up i had to wait 5min till the Windows loading screen came up. Every time i have to restart i have to wait 5min on all this. I have tried disabling AGP 8x and fast write, also tryed increasing the DIMM Vcore to 4.7 and disabling APIC. Any ideas anyone?

Moan Guide
read bit in there re wd jumpers
jumperless if c is alone on ide
master /slave if there are 2 drives on the ide

Adding leading zeros before data loaded into DSO

Hi
In below PROD_ID... In some ID leading zeros are missing before data loaded into BI from SRM into PROD_ID. Data type is character. If leading zeros are missing then data activation of DSO is failed due to missing zeros and have to manually add them in PSA table. I want to add leading zeros if they're missing before data loaded into DSO.... total character length is 40.. so e.g. if character is 1502 then there should be 36 zeros before it and if character is 265721 then there should be 34 zeros. Only two type of character is coming either length is 4 or 6 so there will be always need to 34 or 36 zeros in front of them if zeros are missing.
Can we use CONVERSION_EXIT_ALPHPA_INPUT functional module ? As this is char so I'm not sure how to use in that case.. Do need to convert it first integer?
Can someone please give me sample code? We're using BW 3.5 data flow to load data into DSO.... please give sample code and where need to write code either in rule type or in start routine...

Hi,
Can you check at info object level, what kind of conversion routine it used by.
Use T code - RSD1, enter your info object and display it.
Even at data source level also you can see external/internal format what it maintained.
if your info object was using ALPHA conversion then it will have leading 0s automatically.
Can you check from source how its coming, check at RSA3.
if your receiving this issue for records only then you need to check those records.
Thanks

Auto Time change, Sound mute and trying to read something before windows 7.

Dear,
I recently bought a MacBook Pro i7. I installed Windows 7 Ultimate through Boot Camp. But after installing i am faceing few problems as listed below:
1: *Automatic Time change*
When i am in windows 7 and i switch to Mac OS X the time of my Mac OS X automaticly changes every time and i have to adjust the time every time i switch from Windows 7 to Mac OS X. This problem is when i change my operatinf system from Win to Mac.
2: *Sound Mute*
Whenever i log into Windows 7 i always fine the sound to be mute and i always have to unmute the sound from the button.
3: *MacBook trys to read something before Windows 7 starts booting*
Whenever i start windows 7, before the windows 7 booting screen, there is a black screen with a gray underscore (_) which blinks for a minute or two. And after that the booting of windows 7 starts. That (_) makes me wait a lot before booting into windows 7.
Please help me regarding these problems of mine. I even called the Apple care but they dint have any solution to it.
Waiting for your reply.

hi,
I tried all the methords as u said and it dint work atoll for me. If you have a video or some kinda software which can dignolise these problems than i feel that i can do it. Neways im rely getting so ****** off that after buying such an expensive product, it cant give me complete satisfaction, I feel that apple should first make their current products perfect and then go on launching some other products. Apple shoudent lie to sell it products that windows is compatible with MacBook. I went to a authorised service center Unicorn Infosolutions Pvt Ltd situated in Mumbai,Maharashtra,India. Even they said that all these three problems cant be resolved. This is rely bad, i never thought that apple is like this!!!! i always was a fan of apple n used to always pro-vogue people to buy its products. But now i dont think so. Neways if buy chance there is some other methord or way than please tell me.

Loaded updated no icons on desktop and windows load offscreen ***

Loaded updated no icons on desktop and windows load offscreen ***

Nobody has any thoughts or has had the same issue on this one? Any thoughts are greatly appreciated!
Thank you!

Middleware starts replicating before initial load

Hi folks,
currently i´m setting up the middleware to connect a live ERP with a fresh CRM. The initial load is not done yet, also a lot other configuration stuff. I noticed that at the time of registering the queues the middleware is connecting itself and listing first BDocs in SMW01. Mostly R3AD delta(!) material BDocs (which fail by mapping error currently) but also green ones like 'class message' or 'objcl_message' which seem to have dummy or real entries. This is a problem as i did not configure e.g. R3AC1 filters or number ranges yet.
I thought delta load is triggered first after initial load. How can i stop the middleware before i finish the configuration stuff. If there is a 'switch off' (like deactivate a business adapter object in R3AC1) i guess i would have to switch it on again just before the initial load and then risking uncontrolable connection againg before i can execute R3AS. I mean if i would e.g. deregister the queues i could end my configuration but i would have to register the queues just before initial load and would again having no control about the start of the replication. Is that a problem for you? - How do you handle that issue usually if you set up a new CRM?
Thanks

Hi,
Read these topics:
Re: Turning Bdoc On & Off, & its monitoring
Re: Deactivation of data exchange between ERP and CRM
Denis.

GTX670 - Signal lost/black screen after windows loading icon

Hello,
I hope I am posting this in the correct forum area. If not I do apologize.
Here are my specs:
Board: MSI Z97-G45 Gaming
Bios: ?? whatever pre-installed on mobo
VGA: MSI GTX670 OC
PSU: Corsair HX750 750W
Intel Core i7-4790K
MEM: 12 GB Kingston HyperX DDR3 1600 2x 4GB, 2x 2GB sticks
HDD: SSD Kingston 120 GB (Win7), HDD 1 TB WD 7200 RPM (Win7), HDD 1.5 TB WD 7200 RPM (storage)
COOLER: Corsair Hydro Series H60 Water Cooler
OC: no overclocking done by me..default settings
OS: Windows 7 64bit Professional
So to keep this as direct and as short as humanly possible here is my situation.
Had a gtx670 card that I had to send back to MSI under RMA. They sent me what looks like a new gtx670 card (no dust) that I received yesterday (4 Aug). Last night I removed temporary old card (9800gt) and plugged in new 670gtx. Things seemed to be ok, reinstalled driver after card was recognized. Played one round of Battlefield 4 for testing purposes and all seemed good.
Upon exiting the game things went south in a hurry. Moving the mouse cursor around was extremely slow and choppy. Mouse clicks were not recognized. I could not bring up ctrl-alt-del to get to task manager. At this point the cursor turned to spinning circle as if things were happening. However, after 5+ minutes of nothing changing I did a hard boot.
Restarted and after the windows loading screen the signal appeared to be lost to the monitor and I was left with black screen. This was with the SSD. I then attempted to load into the HDD windows OS that I hadn't logged into yet with this card and was greeted with the same issue.
I can load into Safe Mode with no issues. In safe mode I removed all nvidia drivers and was then able to load into windows normally using basic windows vga drivers. The moment I load the Nvidia drivers and restart the computer I then have the issue again. This happens with both drives.
I have reset the video card in the PCI-Ex16 slot and still received the problem. I have tried a different PCI-Ex16 slot and still had the issue. I put the old 9800gt card back in and windows loaded perfectly and without issues on both drives. I put the 670gt in and try to load into normal windows and I lose signal and get black screen after the windows loading screen.
I'm at a loss at the moment. I think it's the drivers, but could it be the card?
Doing some research I've come across some people saying there may be issues with the nvidia HD audio drivers that are installed with the video drivers. Could it be as simple as uninstalling or unchecking that particular driver?

Flashed the BIOS last night to the latest version and attempted to launch windows with the GTX670 card. I still experienced the same issue where as soon as windows finishes it's loading animation (with Nvidia drivers) and it goes to the login screen, the monitors cut out.
At this point I feel like it has to be the card. The moment I install the video drivers and restart, I have the problem of losing the signal/black screen.
What I have done:
1) Completely wiped any/all video related drivers from the computer and started from scratch. No success.
2) Ran Memtestx86 to see if it's a problem with my memory sticks. No problems found.
3) Put the card in a different PCI-Ex16 slot to see if there was a problem with the slot. No success.
4) Flash updated the BIOS on the motherboard to the latest version. No success.
I have a dual boot computer with Windows 7 64-bit installed on an SSD and a HDD. The problem happens on both drives. Yet, the moment I install my old 9800GT the problem disappears and I can login to Windows just fine.
I will be sending the card back today on another RMA.

Windows Load Balancing 2008 R2 Server, in Multicast Mode

Hi,
We are experiencing a problem setting up windows load balancing with (NLB) IIS . The selected mode is multicast , however after we setup the NLB cluster IP , we cannot ping it outside the OracleVM infrastructure. This applies as well if we try to access it from another VM inside OracleVM.
We can access the private IP's however the cluster IP does not respond when the cluster is in multicast mode.
We have programmed the switches which are layer 2 for static ARP mappings on all connected ports.
Still the problem remains
Does oracle VM 3.2.1 support NLB clustering for IIS servers in multicast mode?
is there any setting that we need to adjust so that the mac of the cluster responds to requests from physical hosts connected to the OracleVM network ?

Hi,
We are experiencing a problem setting up windows load balancing with (NLB) IIS . The selected mode is multicast , however after we setup the NLB cluster IP , we cannot ping it outside the OracleVM infrastructure. This applies as well if we try to access it from another VM inside OracleVM.
We can access the private IP's however the cluster IP does not respond when the cluster is in multicast mode.
We have programmed the switches which are layer 2 for static ARP mappings on all connected ports.
Still the problem remains
Does oracle VM 3.2.1 support NLB clustering for IIS servers in multicast mode?
is there any setting that we need to adjust so that the mac of the cluster responds to requests from physical hosts connected to the OracleVM network ?

Gibberish before windows loads - Tecra M4

Similar Messages

Maybe you are looking for