Gifs not getting served when defaultSetvlet is configured
Hi,
I have configured my WLAS 4.5.1 to have a defaultServlet with the
following lines:
weblogic.httpd.register.myservlet=com.domain.MyServlet
weblogic.httpd.defaultServlet=myservlet
I then find that .gifs in the generated HTML are not getting served to
my browser. It appears that the GET requests for the gifs go to my
default servlet which doesn't handle the request.
Is there a way to configure WLAS so that the default servlet gets all
requests except for .gifs?
Or is there another solution?
-mike-
gif is registered as a MIME type in weblogic.properties (out-of-box). Please
check weblogic.httpd.mimeType.image/gif=gif in your weblogic.properties
file.
Cheers - Wei
Michael Walsh <[email protected]> wrote in message
news:[email protected]..
> I just answered my own question. In addition to the lines below, I added
> the following to my weblogic.properties file and the .gifs are now being
> served:
>
> weblogic.httpd.register.*.gif=weblogic.servlet.FileServlet
>
>
> Michael Walsh wrote:
>
> > Hi,
> >
> > I have configured my WLAS 4.5.1 to have a defaultServlet with the
> > following lines:
> >
> > weblogic.httpd.register.myservlet=com.domain.MyServlet
> > weblogic.httpd.defaultServlet=myservlet
> >
> > I then find that .gifs in the generated HTML are not getting served to
> > my browser. It appears that the GET requests for the gifs go to my
> > default servlet which doesn't handle the request.
> >
> > Is there a way to configure WLAS so that the default servlet gets all
> > requests except for .gifs?
> >
> > Or is there another solution?
> >
> > -mike-
>
Similar Messages
-
Start-msg: could not get server configuration in ldap
Hello,
I am trying to get iPlanet Messaging Server 5.2 Patch 1 running, but when I run start-msg
I get the following error message:
General Warning: could not get server configuration in ldap, using cached configuration information
Note: I created this system using a ufsdump and ufsrestore combination on the instance directory.
Other file systems were not copied over.
My guess is that something else may be missing?
I ran ns-slapd first before starting the messaging server.
Thanks in advance.
TimThanks for the response. I have some followup
questions:
> I have done this with Messaging Server.
Several
things to do:
1. Go into Console, and change it there. Youneed
to change hostname and ip for admin server,Directory
server, and messaging server.
When I bring up the console, it asks for a user nameThe default user's name is "admin". The password was assigned during installation. You can also use, "cn=Mirectory Manager", but again, the password was assigned on install.
>
and password. Well, the admin quit and left no
documentation, so I don't have any idea on what to
use. Any ideas?
>
2. Edit your mappings file, to reflect the new ip
address.
Where is this mappings file?<install directory>/msg-<name of your server>/imta/config
>
> 3. Change the setting for "mailhost" for every
user
to reflect the new hostname. If you don't dothis,
nobody will get any mail.>
I interpret this to mean:
(1) use db2ldif and then use and editor to do a
global
search and replace on the mail hostname.yes
>
> It may turn out to be easier to "migrate" your
data,
rather than "fix" by changing hostname/ip.
to migrate:
install new application on new box, with correct
hostname/ip
Unfortunately, I tried this and did not have much
success. I gave up and went with
ufsdump/ufsrestore.That's very much the hard way. . .
>
> Use MoveUser to migrate users and mailboxes from
old
to new, or
Use imsbackup/imsrestore to move the mailboxes.
Export the data from ldap in ldif format, then usea
a text editor to change the mailhost value for all
the users, and then import that new data to thenew
directory server
I think I will have to do this anyways, right.
Assuming my new box is offline for a while and
users are still using the old box.You can certainly use imsbackup/imsrestore to move all new mails. . . -
General Warning: could not get server configuration in ldap, using cached c
Guys,
desperately need some help here. I have an installation consisting of 4 mtas that speak to an ldap. I'm currently in the process of adding 2 more. I've added the fifth and there has been no problem whatsoever. I'm now trying to add the sixth. I install the software. There are no error messages as the software installs. It's able to see both the configuration and the user directories. Once this is finished I immediately go and run start-msg and for each component I get the message :
"General Warning: could not get server configuration in ldap, using cached configuration information".
I've tried pinging and tracerouting my ldap server with no problem, I can telnet/ssh to it. My server configuration is almost eaxctly the same as the fifth server. I make no other changes after the installation scripts finishes, yet it can't talk to the ldap.
I running IMS5.2p1 on a Solaris 8 SPARC server.
Thanks
AliThat error message only comes up when the server can't get to the config ldap server on startup. There's no other time when you see this.
There is either a mis-configuration of your server, or of your ldap, or you just can't get there from here.
Why are you installing 5.2p1, now? 5.2p2 has been out for over a year. ..
6.0 has been out for well over a year, and 6.2 has been out for many months, now. I hate to see you installing old software, when new is available. -
Could not get server configuration in ldap
for months my server is ok.
but, today it happened the following error
Could not get server configuration in ldap, using cached configuration information
Please help me. What to do?I have verified that ldap is running
The error log shows like this:
[26/Sep/2005:16:36:39 -0500] - slapd started.
[26/Sep/2005:16:38:46 -0500] - cos_cache_build_definition_list: Found n
initions, cos disabled while waiting for updates
[26/Sep/2005:16:38:46 -0500] - cos_cache_create: failed to build cache
[26/Sep/2005:16:38:46 -0500] - cos_cache_getref: no cos cache created
And the access log:
[26/Sep/2005:16:38:52 -0500] conn=8 op=0 BIND dn="uid=admi
=TopologyManagement,o=NetscapeRoot" method=128 version=3
[26/Sep/2005:16:38:52 -0500] conn=8 op=0 RESULT err=0 tag=
[26/Sep/2005:16:39:04 -0500] conn=0 op=1 UNBIND
[26/Sep/2005:16:39:04 -0500] conn=0 op=1 fd=24 closed - U1
[26/Sep/2005:16:39:04 -0500] conn=1 op=1 UNBIND
[26/Sep/2005:16:39:04 -0500] conn=1 op=1 fd=25 closed - U1
[26/Sep/2005:16:39:04 -0500] conn=7 op=1 UNBIND
[26/Sep/2005:16:39:04 -0500] conn=7 op=1 fd=32 closed - U1
[26/Sep/2005:16:39:04 -0500] conn=8 op=1 UNBIND
[26/Sep/2005:16:39:04 -0500] conn=8 op=1 fd=33 closed - U1 -
Print program is not getting triggered when saving the application
Hi all,
My requirement is when i save the invoice using VF01 the print program should get triggered.
The print program is not getting triggered when saving the application even when i have configured the outtype and have attached the print program.
The setting "send immediately (when saving application)" is also checked.
I need to configure it for VF01 transaction.
The error message displayed was " please maintain output device in master data".
Regards,
UmeshHi Umesh
Please check if you have missed any of the following:
1. Defining Access Sequence(can use existing).
2. Defining Output Condition Type(can use existing). - Assigning the Driver Program and Form in processing routine.
3. Output Determination Procedure
4. Assign Output Procedure to Billing Types
Kind Regards
Eswar -
Issue: Not getting response when the document is having special chars
Please help following issue: Not getting response when the document is having special chars(Use any doc with special char(ex: &, $, <, >,.....) TestErrorFour.doc
Error message:
System.FormatException: Invalid length for a Base-64 char array. at
System.Convert.FromBase64String(String s) at
Summarize.Summarizer.AccumulateBroadcast(String filedata, String givenWords) in
c:\DocumentSummarizer\App_Code\Summarizer.cs:line 66
Code:
File 1:
import java.io.BufferedReader;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.FileReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.URL;
import java.net.URLConnection;
import java.util.Properties;
import org.apache.poi.poifs.filesystem.POIFSFileSystem;
import org.apache.poi.hwpf.*;
import org.apache.poi.hwpf.extractor.*;
import com.lowagie.text.Document;
import com.lowagie.text.pdf.PRTokeniser;
import com.lowagie.text.pdf.PdfReader;
public class DocumentSummarizerClient {
static Properties loadProperties() {
Properties prop = new Properties();
try {
prop.load(DocumentSummarizerClient.class.getClassLoader().getResourceAsStream("vep.properties"));
} catch (Exception ioe) {
ioe.printStackTrace();
return prop;
public String getSummary(String fileName,String noOfWordsOrPercentage ){
String summaryInputData ="";
String summarizedData="";
String summarizerURL = loadProperties().getProperty("Summarizer.serviceURL");
try {
String fileExtension=fileName.substring(fileName.lastIndexOf(".")+1, fileName.length());
if (fileExtension.equalsIgnoreCase("doc")|| fileExtension.equalsIgnoreCase("txt")|| fileExtension.equalsIgnoreCase("pdf")) {
if (fileExtension.equalsIgnoreCase("txt")) {
BufferedReader bufferedReader = new BufferedReader(
new FileReader(fileName));
String line = null;
while ((line = bufferedReader.readLine()) != null) {
summaryInputData += line;
if(fileExtension.equalsIgnoreCase("doc")){
POIFSFileSystem fs = null;
fs = new POIFSFileSystem(new FileInputStream(fileName));
HWPFDocument doc = new HWPFDocument(fs);
WordExtractor we = new WordExtractor(doc);
String[] paragraphs = we.getParagraphText();
for( int i=0; i<paragraphs .length; i++ ) {
paragraphs[i] = paragraphs.replaceAll("\\cM?\r?\n","");
summaryInputData+= paragraphs[i];
if(fileExtension.equalsIgnoreCase("pdf")){
Document document = new Document();
document.open();
PdfReader reader = new PdfReader(fileName);
int pageCount =reader.getNumberOfPages();
for(int i=1;i<=pageCount;i++){
byte[] bytes = reader.getPageContent(i);
PRTokeniser tokenizer = new PRTokeniser(bytes);
StringBuffer buffer = new StringBuffer();
while (tokenizer.nextToken()) {
if (tokenizer.getTokenType() == PRTokeniser.TK_STRING) {
buffer.append(tokenizer.getStringValue());
summaryInputData += buffer.toString();
else{
System.out.println("This is Invalid document. Presntly we support only text,word and PDF documents ");
// String encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String encoded=Base64Utils.base64Encode(summaryInputData.getBytes());
// encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String parameters= "base64String="+encoded+"&noOfWordsOrPercentage="+noOfWordsOrPercentage;
summarizedData= postRequest(parameters,summarizerURL);
String slength= "<string xmlns=\"http://tempuri.org/\">";
if(summarizedData.contains("</string>")){
summarizedData= summarizedData.substring(summarizedData.indexOf(slength)+slength.length(),summarizedData.indexOf("</string>"));
summarizedData = replaceVal(summarizedData);
//System.out.println("<?xml version=\"1.0\" encoding=\"utf-8\"?><![CDATA["+summarizedData+"]]>");
// System.out.println("Summarized data "+summarizedData);
if(summarizedData.contains("Please enter the percentage")){
summarizedData="Data given cannot be summarized further";
else{
System.out.println("Data given cannot be summarized further");
summarizedData="";
} catch (FileNotFoundException e) {
return("The File is not found \n\n"+e.toString());
} catch (IOException e) {
return("The File is already in use \n\n"+e.toString());
} catch (Exception e) {
return(e.toString());
return summarizedData;
public static String postRequest(String parameters,String webServiceURL) throws Exception{
Properties systemSettings = System.getProperties();
systemSettings.put("http.proxyHost", loadProperties().getProperty("proxyHost"));
systemSettings.put("http.proxyPort", loadProperties().getProperty("proxyPort"));
System.setProperties(systemSettings);
String responseXML = "";
try {
URL url = new URL(webServiceURL);
URLConnection connection = url.openConnection();
HttpURLConnection httpConn = (HttpURLConnection) connection;
byte[] requestXML = parameters.getBytes();
httpConn.setRequestProperty("Content-Length", String
.valueOf(requestXML.length));
httpConn.setRequestProperty("Content-Type",
"application/x-www-form-urlencoded");
httpConn.setRequestMethod("POST");
httpConn.setDoOutput(true);
httpConn.setDoInput(true);
OutputStream out = httpConn.getOutputStream();
out.write(requestXML, 0, requestXML.length);
out.close();
InputStreamReader isr = new InputStreamReader(httpConn
.getInputStream());
BufferedReader br = new BufferedReader(isr);
String temp;
String tempResponse = "";
while ((temp = br.readLine()) != null)
tempResponse = tempResponse + temp;
responseXML = tempResponse;
br.close();
isr.close();
} catch (java.net.MalformedURLException e) {
System.out
.println("Error in postRequest(): Secure Service Required");
} catch (Exception e) {
System.out.println("Error in postRequest(): " + e.getMessage());
return responseXML;
public String replaceVal(String value) {
if (value == null) {
value = "";
value = value.replace("<", "<");
value = value.replace(">", ">");
value = value.replace("&", "&");
return value;
public static void main(String[] args) {
DocumentSummarizerClient testdoc=new DocumentSummarizerClient();
System.out.println("hello");
testdoc.getSummary("C:\\working_folder\\vep\\UnitTestCases\\VEP1.0\\DocumentSummarizerTestData\\TestErrorFour.doc","100%");
Note: Use any doc with special char(ex: &, $, <, >,.....) TestErrorFour.doc
File 2:
---------public class Base64Utils {
private static byte[] mBase64EncMap, mBase64DecMap;
* Class initializer. Initializes the Base64 alphabet (specified in RFC-2045).
static {
byte[] base64Map = {
(byte)'A', (byte)'B', (byte)'C', (byte)'D', (byte)'E', (byte)'F',
(byte)'G', (byte)'H', (byte)'I', (byte)'J', (byte)'K', (byte)'L',
(byte)'M', (byte)'N', (byte)'O', (byte)'P', (byte)'Q', (byte)'R',
(byte)'S', (byte)'T', (byte)'U', (byte)'V', (byte)'W', (byte)'X',
(byte)'Y', (byte)'Z',
(byte)'a', (byte)'b', (byte)'c', (byte)'d', (byte)'e', (byte)'f',
(byte)'g', (byte)'h', (byte)'i', (byte)'j', (byte)'k', (byte)'l',
(byte)'m', (byte)'n', (byte)'o', (byte)'p', (byte)'q', (byte)'r',
(byte)'s', (byte)'t', (byte)'u', (byte)'v', (byte)'w', (byte)'x',
(byte)'y', (byte)'z',
(byte)'0', (byte)'1', (byte)'2', (byte)'3', (byte)'4', (byte)'5',
(byte)'6', (byte)'7', (byte)'8', (byte)'9', (byte)'+', (byte)'/'};
mBase64EncMap = base64Map;
mBase64DecMap = new byte[128];
for (int i=0; i<mBase64EncMap.length; i++)
mBase64DecMap[mBase64EncMap[i]] = (byte) i;
* This class isn't meant to be instantiated.
private Base64Utils() {
* Encodes the given byte[] using the Base64-encoding,
* as specified in RFC-2045 (Section 6.8).
* @param aData the data to be encoded
* @return the Base64-encoded <var>aData</var>
* @exception IllegalArgumentException if NULL or empty array is passed
public static String base64Encode(byte[] aData) {
if ((aData == null) || (aData.length == 0))
throw new IllegalArgumentException("Can not encode NULL or empty byte array.");
byte encodedBuf[] = new byte[((aData.length+2)/3)*4];
// 3-byte to 4-byte conversion
int srcIndex, destIndex;
for (srcIndex=0, destIndex=0; srcIndex < aData.length-2; srcIndex += 3) {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex] >>> 2) & 077];
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+1] >>> 4) & 017 |
(aData[srcIndex] << 4) & 077];
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+2] >>> 6) & 003 |
(aData[srcIndex+1] << 2) & 077];
encodedBuf[destIndex++] = mBase64EncMap[aData[srcIndex+2] & 077];
// Convert the last 1 or 2 bytes
if (srcIndex < aData.length) {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex] >>> 2) & 077];
if (srcIndex < aData.length-1) {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+1] >>> 4) & 017 |
(aData[srcIndex] << 4) & 077];
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+1] << 2) & 077];
else {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex] << 4) & 077];
// Add padding to the end of encoded data
while (destIndex < encodedBuf.length) {
encodedBuf[destIndex] = (byte) '=';
destIndex++;
String result = new String(encodedBuf);
return result;
* Decodes the given Base64-encoded data,
* as specified in RFC-2045 (Section 6.8).
* @param aData the Base64-encoded aData.
* @return the decoded <var>aData</var>.
* @exception IllegalArgumentException if NULL or empty data is passed
public static byte[] base64Decode(String aData) {
if ((aData == null) || (aData.length() == 0))
throw new IllegalArgumentException("Can not decode NULL or empty string.");
byte[] data = aData.getBytes();
// Skip padding from the end of encoded data
int tail = data.length;
while (data[tail-1] == '=')
tail--;
byte decodedBuf[] = new byte[tail - data.length/4];
// ASCII-printable to 0-63 conversion
for (int i = 0; i < data.length; i++)
data[i] = mBase64DecMap[data[i]];
// 4-byte to 3-byte conversion
int srcIndex, destIndex;
for (srcIndex = 0, destIndex=0; destIndex < decodedBuf.length-2;
srcIndex += 4, destIndex += 3) {
decodedBuf[destIndex] = (byte) ( ((data[srcIndex] << 2) & 255) |
((data[srcIndex+1] >>> 4) & 003) );
decodedBuf[destIndex+1] = (byte) ( ((data[srcIndex+1] << 4) & 255) |
((data[srcIndex+2] >>> 2) & 017) );
decodedBuf[destIndex+2] = (byte) ( ((data[srcIndex+2] << 6) & 255) |
(data[srcIndex+3] & 077) );
// Handle last 1 or 2 bytes
if (destIndex < decodedBuf.length)
decodedBuf[destIndex] = (byte) ( ((data[srcIndex] << 2) & 255) |
((data[srcIndex+1] >>> 4) & 003) );
if (++destIndex < decodedBuf.length)
decodedBuf[destIndex] = (byte) ( ((data[srcIndex+1] << 4) & 255) |
((data[srcIndex+2] >>> 2) & 017) );
return decodedBuf;
issue 2: Exception when passing 2MB .txt file
Steps to reproduce:
Call getSummary() with 2MB .txt file
Actual:
The following exception has occured:
1. Error in postRequest(): Unexpected end of file from server
java.lang.NullPointerException
Please provide your precious feedback/suggestions.
Thanks in advance…..
Edited by: EJP on 15/03/2011 16:52: added code tags. Please use them. Code is unreadable otherwise.Thanks for your response….
This is enhancement project and some one develops long back.
Regarding point (b) You should be using the java.net.URLEncoder to encode URL parameters, not a base64 encoder.
DocumentSummarizerClient.java I am using base64
Ex:
// String encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String encoded=Base64Utils.base64Encode(summaryInputData.getBytes());
// encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String parameters= "base64String="+encoded+"&noOfWordsOrPercentage="+noOfWordsOrPercentage;
summarizedData= postRequest(parameters,summarizerURL);
String slength= "<string xmlns=\"http://tempuri.org/\">";
if(summarizedData.contains("</string>")){
summarizedData= summarizedData.substring(summarizedData.indexOf(slength)+slength.length(),summarizedData.indexOf("</string>"));
summarizedData = replaceVal(summarizedData);
//System.out.println("<?xml version=\"1.0\" encoding=\"utf-8\"?><![CDATA["+summarizedData+"]]>");
System.out.println("Summarized data "+summarizedData);
if(summarizedData.contains("Please enter the percentage")){
summarizedData="Data given cannot be summarized further";
Above specific please I need to modify to resolve above issue.
Could you please suggest me what changes I need to do.
Waiting for positive response. -
Profit Center Document not getting generated when direct FI doc is posted
Dear Experts,
Profit Center Document not getting generated when direct FI doc is posted. However CO Document is generated for Line Item 1 mentioned below.
Accounting Entry
Line 1 -Debit Expense ( Cost Center) 1000
Line 2 - Credit Bank 1000
Advance Thanks
SanjaiHi,
Pls check profit center configuration.... Some config might have missed.....
Use the t.code 1KE1 For analysing the profit center configuration.
Regards,
RAM
Edited by: Ram000 on Oct 7, 2011 10:45 AM -
i have connected my iphone5 to update the ios8 sofware, now it is stuck in the plug-n screen indicating itunes. the phone is not getting recognized when logged in to itunes on the computer
Try this:
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
copied from Resolve iOS update and restore errors -
How do I save photos that have been synced to my Ipad2, so that they do not get deleted when I sync with a different photo foder on my computer (Pc win7).
Place that first folder of photos that you synced to the iPad within the main folder of photos that you sync from and select them to sync again. You can place any number of subfolders within the main folder that you sync from and select those folders to sync. Just "tick"(select) the folders in the photos tab in iTunes.
iOS and iPod: Syncing photos using iTunes -
0PS_C02 update rules are not getting activated when i install 4rm BI conten
Hi All,
In BI Dev. sys for PS module- Project System - Dates 0PS_C02 cube- update rules are not getting activated when i install from the business content and its giving the error " IC=0PS_C02 IS=0PS_DAT_PRJ error when checking the update rules Message no. RSAU461" .
I deleted the inactive update rules(6 nos) and installed again from BI Content, then the same issue raising.
Can anyone help me out as i stuck up with this to move to go-live.
Thanks,
SakaliHi Vassu,
here are some of the reasons for getting error in update rules activation.
1. Check the formula or routines that are used in Update rules and check is there any syntax errors.
2. check whether the mappings are correct or not.
3. check the info objects which ur used for mapping are in active or not..
(or) if the info object may be deleted which ur using for mappings.
Thanks
Sai Chand. -
I tried syncing entire music library to ipod. some albums were skipped. tried clicking and dragging but device does not get highlighted when i drag the album to the device. How can I sync album to ipod? the album is imported and not purchased thru itunes store.
Does it play in iTunes on the computer? What is the format of the album?
Right click and select Get Info. Look under File in iTunes 12 -
My wife and I upgraded to iOS seven approximately two weeks ago. But now we do not get alerts when we have voicemails waiting. Also we do not have visual voicemail.... My daughter upgraded to iOS 7 around the same time. And has no problems with either settings. We both upgraded to 7.0.2 approximately one week ago. Did that cause everything to go awry? What should do?
Hi there volpone1a,
You may want to double check the notification settings on your device. Take a look at the article below for more information.
iOS: Understanding notifications
http://support.apple.com/kb/HT3576
-Griff W. -
Workflow initiator does not get workitems when PR Approve rejects.
Hi,
Workflow initiators does not get workitems when PR Approve rejects.Is there any thing missing in that .
Please let me know .
Regards,
Gurprit Bhatia
Edited by: GURPRIT BHATIA on Jan 28, 2009 8:38 AMHi GB,
In order that the WF initiator gets workitems on PR rejection, you need to assign method 'InfoReleaseRejected' (BO BUS2009) to a task in the PR rejection flow of your WF. If this is done, then check if you have assigned WF Initiator as the Agent in that task.
Hope this helps.
Thanks,
Ajay -
Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012 -
When I try to download the ebook I bough, the Adobe Digital Reader shows the following message: "can not reach server". Can someone please help me with this?
TO be precise, it says "licensee server communication problem"
Thank youThe thread running through your explanation has to do with connectivity to your server. (iCloud out of the blue asking for password, unable to message your boyfriend, unable to access e-mail). You said that you boyfriend restart his device and then the two of you were able to then imessage. My best advice for you would be to go to settings to reset to reset network settings. Once this has been done you then will need to enter the name and password of your wifi. ONce this is done you then can attempt to check to see that all passwords are enter correctly.
Good luck.
Maybe you are looking for
-
I have used Firefox for a number of years but some time ago I got a virus on my computer. I loaded eset nod32, removed the virus and cleaned the old files etc. using ccleaner.com. Now I keep getting the "The connection to the server was reset while t
-
How can I quit this service and not continually be charged?
I just got charged again yesterday@. I have contacted my credit card company and they have stopped paying this recurring nightmare. Anyone have a suggestion? I will never get another account again. Help! Your Adobe ID:[email protected] Your Case Numb
-
HDV vs. DV: Exporting to DVD process???
Couple of questions here. I dont have too much experience exporting to a DVD. 1) Current equipment is a Canon GL2 with Final Cut HD. I created a 10 min video project with captures using the DV ntsc presets- 720 x 480. Compiled the clips and exported
-
Calling VA03 item screen and return to calling program
Hi Exports, Good Day.... I am having one issue in my development. My requirement is, I am calling VA03 item screen form my report output based on the user selected order and when user clicks on back butten it should come to my report output list
-
I have an HP Computer., approximately one year old. Since I bought the program,( about 8 months ago) it had worked correctly, but last month, I could not save projects to DVD because program said, " No burner detected" . Welcome any help as I am tryi