GIFs start part way through the animation after loading.

The title pretty much says it. After GIFs fully load, the animations start part, about half, way through before looping.

Hi Kaldari-
Sometimes, the video or audio content in a web page cannot be properly downloaded and displayed in Firefox. A required plugin may be missing, outdated, blocked, in conflict with another plugin or extension, or the content may be blocked for some reason. This article will help you solve these problems.
[[Video or audio does not play]]
Hope that helps!

Similar Messages

  • After synchronising, the iPod song starts part way through the song. Same song starts fine on iTunes. Wassup?

    Why is it that after I synchronise my iPod with iTunes the track on my iPod starts part way through the song? Only happens with the occasional song and is not widespread. The iTunes song on my laptop is fine - when I play it from iTunes it starts from the start.
    Any help would be very welcome

    You're in the exact same situation as me, and I can't seem to find help with this problem.

  • I've just downloaded Sophos (yesterday) and commenced the scan. It keeps stopping part way through, the 2nd time when it was about 98% completed after 4 hours!!!! I've had to start again. What could be causing this? I have Mountain Lion.

    I've just downloaded Sophos (yesterday) and commenced the scan. It keeps stopping part way through, the 2nd time when it was about 98% completed after 4 hours!!!! I've had to start again. What could be causing this? I have Mountain Lion.

    Thomas A Reed wrote:
    You will be advised by people here that Sophos is "junk" and should be removed {...} Sophos actually works pretty well, in my testing, and so I would suspect that there may be an underlying problem with your file system that needs to be repaired.
    FWIW, I have used Sophos regularly for several years now (including on my new iMac running Mountain Lion versions 10.8.2 & now 10.8.3) & never had any problems with it on any of the half dozen or so Macs I have installed it on.
    Quite a few people automatically assume all Mac A-V software is troublesome junk, & many will leap to the conclusion it is the cause of some problem without considering other potential (& often much more likely) causes, regardless of which A-V product is installed.
    Obviously I hope, not all A-V products are alike, so it doesn't make a lot of sense to me to condemn them all because of problems with one of them. Regarding Sophos in particular, finding first hand reports of it causing problems is quite difficult -- typically, if you ask for the details it turns out to be a second or third hand report & there isn't enough info available to know for certain if it is the real cause or not.
    This is not to say it is impossible for it to cause problems, just that it is prudent to consider all the possibilities before concluding that any one of them is the cause.

  • I am trying to watch tv shows that i have purchased but part way through the show it pauses and will not allow me to play the show.  What do i do?

    I am trying to watch a tv show that was purchased but part way through the show it pauses and it will not allow me to continue playing the show.

    That is correct.
    That is the price of a replacement iphone once your iphone is outside of the warranty period

  • TS2951 I have a laptop (2010) with Lion OS and tried to install Mavericks and part way through the installation it quit and reverted back to Lion and the app store doesn't let me download Mavericks again

    I have a laptop (2010) with Lion OS and tried to install Mavericks and part way through the installation it quit and reverted back to Lion and the app store doesn't let me download Mavericks again. How can I resolve this?

    Is your data backed up?
    Are you running any non-Apple system optimization tools?

  • Hi, We start to list items on ebay, part way through the system throws us out

    Hi, we have problems with Apple & Ebay, we start to list an item to sell , get part way through & Ebay asks us to sign in repeatedly!, Ebay say it's an Apple problem, Apple say it's down to Ebay, ARGHH!, please help?

    Try a different web browser*:
    http://www.macmaps.com/browser.html
    If a different web browser works, it sounds like something is affecting either browser cache or cookies, or the keychains that are you are running on your system.

  • Upgrading part way through the term of a plan

    I'm looking to sign up for the 'Photoshop Photography Program' plan as well as a Single App plan for Illustrator. If my needs require that I need another app partway through the first year can I upgrade to the full plan without any penalty. Or do I have to either wait until 12 months are up or cancel (and loose) what I've already paid for and start again part way through?
    I'm torn between getting Creative Suite CS6 Design Standard as well as Lightroom separately on a one off, or signing up for CC, which I accept is more flexible but in the long term will cost considerably more. These are not every day tools for me but they are essential all the same, a major investment which ever way you cut it.
    Thanks in advance for your response, Chas RFNM.

    Hi RFNM,
    Yes, you can upgrade to CC full plan anytime and to waive off the penalty please contact customer support:
    http://www.adobe.com/support/download-install/supportinfo/
    You can refer the below mentioned link also to manage subscription:
    http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html
    Let us know if you require any further information,
    Thanks!
    Gurleen

  • Picture washes out part way through the picture

    I am using an Hp c310.  The picture that I printed started fine about 1/4 of the way through the print the color began to wash out.

    This could be caused by your ink running out or by a clogged vent in the ink supplies.  Try the troubleshooting steps in this page.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I keep getting an error on my pc part way through the setup than it reverts it's self so I can't even get to the apps to sync any thing an help.

    I get an error when I run iCloud setup so I can't get into it on my windows 8 pc. the error comes up : the error during the installation of assembly "microsoft.VC80.CRT,type="win32",version="8.050727.6195",publickeytoken="1fc8b3 b9a1e8e3b",process or architecture="amb64". please refer to help nad support for more information. HRESULT:0x80070570.  Any clue to what that means and how to fix it?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Captivate 8 - Animated text stops part way through play

    I have created a presentation with CAP8 and am finding the animated text does not play out in full, but stops part way through.
    eg. animation to type [email protected] and then on a new line same text box [email protected]
    slide preview it runs perfectly. In the preview next five slides and in publication it runs  all of [email protected] and then freezes after typing johnbe
    It actually stops the video it seems, as i can hit play to resume, which will then type out the rr, and will complete the email on a third time hitting play.
    I get the same thing on the next slide with two of the three text animations that are running simultaneously, and again on the next slide. I want to point out that this is not just on one slide.
    I have changed settings on the properties from " rest of slide" to "Duration of animation", and there is no change. I have lengthened the slide timing just in case that makes a difference, even though I am using Shape buttons to progress to the next slide. No change.
    Any suggestions please?
    Thank you
    Claire

    Yes here are a couple of screen shots. I am sorry it doesnt show an exact time but with simulation it is at about the 2.5 second mark for the first stop
    first error screen
    second scrren with the error

  • My iMac starts up and then shuts itself down during the boot up process. it shuys down half way through the Apple logo appearing. any ideas how to fix?

    My iMac starts up and then shuts itself down during the boot up process. it shuys down half way through the Apple logo appearing. any ideas how to fix?

    Hi daveormond,
    I'm sorry to hear you are having these issues with your iMac. If you continue to have issues with your Mac shutting down part way through the boot up process, you may find the troubleshooting steps outlined in the following articles helpful (given your description, it sounds like it could be either issue, or a combination of both):
    Mac OS X: Gray screen appears during startup - Apple Support
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
    Regards,
    - Brenden

  • Audio disappears part way through avi file

    I have imported an avi file into a new CC project.
    Video stream:
    Codec: DV Video (dvsd)
    Resolution: 720x576
    Frame Rate: 25
    Decoded format: Planar 4:2:0 YUV
    Audio Stream
    Codec: PCM S16 LE (araw)
    Channels: Stereo
    Sample rate: 48000 Hz
    Bits per sample: 16
    PC is running Windows 8.1 and is running CC 7.2.2 (33)
    The file itself runs for 43 minutes and is 5.4 Gb in size
    When editing the file 25 minutes in the audio disappears completely and is gone for the rest of the clip.
    I have checked the file in VLC and the audio is present throughout the file.
    I used Avidemux 2.6 to split off from the main file about 10 minutes of data where there was no audio within Premiere.
    I imported that new file into Premiere and the audio is present in the new file.
    I can therefore use that but don't know what is wrong with the original file.
    The list of codecs installed on my PC are:
    Video:
    ICM
    Microsoft YUV
    UYVY
    msyuv.dll
    6.3.9600.16384
    ICM
    Intel IYUV codec
    IYUV
    iyuv_32.dll
    6.3.9600.16384
    ICM
    Cinepak Codec by Radius
    cvid
    iccvid.dll
    1.10.0.12
    ICM
    Microsoft YUV
    UYVY
    msyuv.dll
    6.3.9600.16384
    ICM
    Toshiba YUV Codec
    Y411
    tsbyuv.dll
    6.3.9600.16384
    ICM
    Microsoft YUV
    UYVY
    msyuv.dll
    6.3.9600.16384
    ICM
    Intel IYUV codec
    IYUV
    iyuv_32.dll
    6.3.9600.16384
    ICM
    Microsoft RLE
    MRLE
    msrle32.dll
    6.3.9600.16384
    ICM
    Microsoft Video 1
    MSVC
    msvidc32.dll
    6.3.9600.16384
    DMO
    Mpeg4s Decoder DMO
    mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
    mp4sdecd.dll
    6.3.9600.16384
    DMO
    WMV Screen decoder DMO
    MSS1, MSS2
    wmvsdecd.dll
    6.3.9600.16384
    DMO
    WMVideo Decoder DMO
    WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2, VC1S
    wmvdecod.dll
    6.3.9600.17031
    Type
    Name
    Format
    Binary
    Version
    ACM
    Microsoft GSM 6.10 Audio CODEC
    0031
    msgsm32.acm
    6.3.9600.16384
    ACM
    Microsoft CCITT G.711 A-Law and u-Law CODEC
    0007
    msg711.acm
    6.3.9600.16384
    ACM
    Fraunhofer IIS MPEG Layer-3 Codec (decode only)
    0055
    l3codeca.acm
    1.9.0.401
    ACM
    Microsoft IMA ADPCM CODEC
    0011
    imaadp32.acm
    6.3.9600.16384
    ACM
    Microsoft ADPCM CODEC
    0002
    msadp32.acm
    6.3.9600.16384
    ACM
    Microsoft PCM Converter
    0001
    DMO
    WMAudio Decoder DMO
    0160, 0161, 0162, 0163
    WMADMOD.DLL
    6.3.9600.16384
    DMO
    WMAPro over S/PDIF DMO
    0162
    WMADMOD.DLL
    6.3.9600.16384
    DMO
    WMSpeech Decoder DMO
    000A, 000B
    WMSPDMOD.DLL
    6.3.9600.16384
    DMO
    MP3 Decoder DMO
    0055
    mp3dmod.dll
    6.3.9600.16384
    Any suggestions of where to start?
    Thanks

    Thank you for the information.
    I have read the source patching article and watched the video too.  Very interesting and an impressive function.
    I did also look at the Audio Conforming link a lot of which I didn't understand; I think though I did try what was suggested regarding XMP stuff although it did not make any difference with the file I had the issue with.
    My problem is that the audio just stops part way through the clip.
    I have reduxed into a new file all the audio/video from the original file from just before the audio disappeared and that seems to work OK.  Perhaps there is an issue with my original file.
    It doesn't help that I have a brand new PC and this is the very first video I have edited in Premiere CC as I had previously been using CS4 and even then I haven't used that for a while.
    Anyway, thank you for your help and I will see how I get on.

  • Photoshop CC 2014: HDR pro trying to merge 3 pictures part way through process stops.

    HDR pro gets part way through the process then stops as if nothing is open and I can carry on working in PS as if nothing processing. Have closed and opened again and shut down and restarted computer, also waited for a long time but still nothing happens.

    I copied that .jsx file to a new name "Xbytor Image Processor Pro.jsx" edit that file changed the string Dr Browns services to "Xbytor Image Processor Pro" then commented out all the code that added tools menu items but "Image Processor Pro" and I put that file into
    "C:\Program Files (x86)\Common Files\Adobe\Startup Scripts CC\Adobe Bridge" even though Bridge CC is 64Bit seems to use theat location.
    Bridge CC was updated by the creative clouds update and opens Photoshop CC 2014 now

  • When i watch something on you tube or any video, it stops part way through

    when i watch something on you tube or any video, it stops part way through the screening and i cannot get it to continue. it is so frustrating!

    Go to this link to download the installer and this link to determine which version you have installed. Always get extensions like this from the publisher (in this case Adobe) and not from some website that says you need an extension and offers to install it for you since you may end up with malware instead.
    BTW, once the current version of Flash is installed, you can set its preferences to update automatically in the background.

  • HT204370 I rented a movie from the Itunes store and started watching it, but my computer jammed part way through, and now i can't find the movie to continue playing it, where can i find it?

    I rented a movie from the Itunes store and started watching it, but my computer jammed part way through, and now i can't find the movie to continue playing it, where can i find it?

    Hi brett242424,
    Welcome to the Support Communities!
    The movie would be in your iTunes library, in the Movies application.  However, if the rental period has expired, you may need to contact the iTunes Store Support about your situation:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    Cheers,
    - Judy

Maybe you are looking for

  • How to show all the rows in PRint html option in obiee 11g

    Hi , I am facing a issue in obiee 11g(windows 2003 server). I have 2 environments (SIT & dev) In dev I am not facing any issue but in SIT when i print the report in html only 1-25 rows are displayed. What should i do to see all the rows Thanks in adv

  • Report Builder 3.0 filter expression not working

    I have a dataset in ReportBuilder 3.0 that is filtering rows from a table on a DistrictNumber field of type integer. The value to be filtered is coming from a prompted parameter. The filter is [DistrictNumber] = [@OutcomeDistrictNumber] and this is w

  • Reg:protocol used in XI

    Hi, After the message is sent from integration engine to advanced adapter engine,through which protocol the AAE receives the message.whether it is XI protocol or HTTP protocol. pls let me know when XI protocol is used and when HTTP protocol is used i

  • Code changes in Production system.

    Hi all, Due to the unavailability of the development and quality i want make code changes in production system. Please tell me is this possible and also i want know that does it effect or not? Regards, Ramprasd

  • Cancel process order

    how to cancel process order confirmed in z program i mean details for cqancellation of process order phase wise and operation wise like tables, bapi