Gift Card just stopped working?!?!?!

Ok, i was just buying songs on iTunes when in the middle of purchasing the second selected song, it said that there was a payment issue and I had to use my credit card. what is up???

your credit is still most likely there. there has been quite a lot of issues with iTunes since Xmas. try signing out and back into your account, it should refresh it.

Similar Messages

  • Airport Extreme Card just stopped working -help!!

    I've had my MacBook Pro since mid August with a built Airport Extreme Card. It has for most of the time been working fine with my Netgear router. Yesterday it just stopped working. The black bars aren't showing on the aiport, it keeps refusing to accept the WEP password.
    I have tried switching the airport on and off, and have also switched off the router and re started it, all to no avail. The WEP password is correct.
    I have a WIFI printer connection and the airport will not connect to that either.
    This has happened once before about 6 weeks ago but I can't remember what I did, if anything, to remedy the situation.
    I have 3 other laptops all working perfectly well on the system, and all printing from the printer without any problems.
    Any suggestions before I and the laptop go hurtling through the first floor window?

    Hello MiBy. Welcome to the Apple Discussions!
    I've had my MacBook Pro since mid August with a built Airport Extreme Card. It has for most of the time been working fine with my Netgear router. Yesterday it just stopped working. The black bars aren't showing on the aiport, it keeps refusing to accept the WEP password.
    Try resetting your MBP's PRAM ...
    Reset the PRAM
    o Shut down the computer.
    o Turn on the computer.
    o Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    o Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    o Release the keys.
    (ref: Resetting your Mac's PRAM and NVRAM)

  • Why has my iTunes gift card suddenly stopped working?

    I received a £25 iTunes gift card for my birthday in November and I reddemed it on my iPod touch. I had purchased a film for £6 shortly after Christmas using it and then I decided to wait for the new Disney film Frozen to come out so that I could use the remaining money on it to buy it. However, when it came out at the end of March, I tried buying it but then I saw that the gift card had been taken off my account. Usually it showed that I still had it in the iTunes store at the 'Redeem' section but it didn't have any signs of ever being there. I tried re-redeeming it but it just said that that gift card had already been redeemed.
    The only purchase since I reddemed at first was that film I mentioned earlier. I understand that gift cards only expire 2 years after they have been activated so I have no idea what has happened. It's a great pity to lose all the money that was still on it and I really wanted to get that film!
    Could someone please help me understand what is going on and if I can still get it to work again???!!!!!

    Hi Ncsimac,
    Thanks for the question. Based on what you stated, it seems like the iMac is not recognizing an ethernet connection. What is it connecting to? I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    Using Apple Hardware Test - Apple Support
    Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • HT2188 i have iphone 3 and when i updated the software my sim card as stopped working, pls what can i do

    i just updated my iphone_3, and my sim card has stopped working, i tried to restore and it kept coming back with erorr mrssage, what can i do

    An iPhone 3G cannot be updated to 5.1.1; the last version supported is 4.2.1. So if you managed to get 5.1.1 on it through some means that bypasses Apple's protections you have wiped out your phone.

  • I was using my HDMI port to connect to my TV .port just stopped working

    I was using my HDMI port to connect to my TV .port just stopped working
    HP Pavilion g6 Notebook PC
    Version 6.3.9600 Build 9600

    Hey @kirilsubacs ,
    Welcome to the HP Forum!
    I understand the HDMI port has stopped working on your Pavilion G6 notebook.
    It would help to know exactly which notebook you are using and the installed operating system. For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number? To see which version of Windows you are using click here: Which Windows operating system am I running?
    If this is a new issue I would start by doing a system restore. This will undo any changes to the operating system and uninstall any Windows updates, programs, or program updates installed after the restore date. This will not delete your personal files.
    If that doesn't work try updating the drivers for your graphics card (GPU). You can find the drivers for your notebook here: HP - Drivers & Downloads.
    Let me know if that helps or please provide the model and operating system of the notebook.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • My media player just stopped working.

    My media player on my Q10 just stopped working. When I try to pla an audio or video file it will play for at most 7 seconds and stop and next the following error msg will be displayed "the file can't be played due to an unexpected error". I have wiped my phone but it is still the same

    I don't know. Quick searching did not turn up a sure fire fix. Maybe you have searched as well. There is a long thread on CrackBerry where several users report trying different things. Is wiping the device the only thing you have tried?
    If you have another card (or can borrow one) that is what I would want to try. In that one thread, that was the one reported fix: a new card.
    If playing files from device memory works, and reformatting the card doesn't fix the problem, seems to me next step is try another card that you know is good.
    - Ira

  • Airport just stopped working

    Hi Everyone,
    I hopw someone has some info that might help.
    I have a MacBook and PC (yuck). Both just stopped working with my Airport Extreme, and when I tried plugging the ethernet cable directly into both, nothing happened. No data was transferring.
    I called my cable company and they were able to get my PC working, directly connected, but not the MacBook.
    When the ethernet cable is plugged directly into the MacBook, nothing happens...no lights showing it's connected to the computer. When I connect the ethernet cable to the Airport, everything lights up, showing a connection, but I can't get the data to transfer from Airport to MacBook (or PC for that matter).
    Right now, I'm hijacking someone else's wireless signal in my condo...don't really know who. So, I know my Airport card is working properly.
    The tech at Brighthouse cable saod something about earthlink customers having trouble recently because of something that earthlink downloaded to them, where IP addresses wouldn't renew. I never downloaded anything, is this possible?
    I'm really stumped, and frustrated because I can't connect, and it's not feasible for me to hardwire in due to the location of my cable modem. Plus, that only works with the crappy PC, and I don't want to use that.
    Please, someone help...I'm desperate...and at a loss for what the problem could be!
    Thank you!!!!
    EDIT: I just powered up my old iBook G4, and it won't connect to my base station either
    EDIT X2: I should probably add what I have already tried...I have (several times) unplugged the cable modem and Airport base station. Used Airport set up to re-set it (again, several times).

    Ok MCOJerry,
    Here's the scoop.
    My friend called and gave me the story much like you described. Almost identical in fact.
    He had called TimeWarner, who didn't come to any resolution and then referred him to Earthlink, washing their hands in the process.
    A over seas tech support then spend a couple of hours, then made a call back with another tech. who also spent significant time on the phone. This time the tech reconfigured OSX a couple of times. Set up alternate location profiles, changed the DNS settings etc.
    They re-assigned the IP address and forced the cable modem to init. the MAC address list. They also disconnected the Airport Extreme (the square version) connected the mac directly to the modem and forced a manual set of IP settings.
    They got the mac to work with this last configuration, but of course the rest of the machines were out of luck as was the network printer.
    All in all he spent six hours on the phone.
    When I got 'the call' I had him give me some preliminary network stats and then had him reconnect the Airport Extreme. This yielded a dead internet connection.
    So as I wrote earlier, I went over there armed with a boat load of tools & cables.
    I reconfigured the mac to a normal & stable automatic type configuration. I also reset the the Airport buy pressing the reset button for 5sec. Then set up a new configuration. I made sure that the latest update was applied to the Airport extreme.
    Then I logged on to the cable modem. Don't mis-understand, I did not log on to the internet through the modem. I logged on to the modem's internal web server. checked some logs and ran a couple of tests.
    Then I found the problem. The real problem: The signal power level from the point of demarcation (at the pole) was so low as to be useless. Eliminating the Airport Extreme, simply removed a level of complication in the system. It also may have removed some spurious RF that may have been introduced into the network. It did not result in a resolution to the real problem.
    The cable line needs to be physically repaired. Either a wet connection or a frayed shield or the line needs a booster. But the problem, which looked like a Airport extreme issue is in fact a bad cable line.
    I do have him up and running on the Airport Extreme at this moment by eliminating all extraneous length from his cable line within the house. The cable modem is now located in the basement where the cable enters the house. I have an single ethernet cable running from there to the Airport Extreme. I pulled all the other electrical items from this particular power line branch (This specific circuit.) This is all temporary until the cable guy/gal arrives to fix the problem.
    I hope this may help you in your trouble resolution.
    -Alan
    Specs:
    Motorola SB 5100 Cable Modem.
    minus (-)5db signal power level
    Software Version: SB5100-2.3.2.5-SCM01-NOSH
    Hardware Version: 3
    MIB Version: II
    GUI Version: 1.0
    VxWorks Version: 5.4
    OSX 10.4.9
    Airport Utility 5.1 (510.18)
    Airport Extreme Base Station (square model) V7.1
    Open DNS
    208.67.222.222
    208.67.220.220
    AlBook, TiBook, iMac, iBook   Mac OS X (10.4.9)   Corporate / mixed environment / multiple networks.

  • I have two graphics cards in my PC . after I had to reinstall windows again has been slower pc and stuff not play 4k footage . Can you help me find out about it " Raks " graphics card has stopped working ?

    I have two graphics cards in my PC . after I had to reinstall windows again has been slower pc and stuff not play 4k footage . Can you help me find out about it " Raks " graphics card has stopped working ?

    I'm not aware of any, not to say that there aren't any issues.
    it may have nothing to do with ntpd, there are a lot of things running.
    ntpd just happen to make the log entry at the same time as the panic.
    I would check to see if there are any updates available for you system.
    if this is the first time that this has happened. it may be (pick one):
    cosmic rays
    sun spots
    the trilateral commission
    if this happens more frequently and that traces look the same, then
    there may be a real problem that needs to be looked into further.

  • My gift card didn't work

    I bought a $15 iTunes gift card and after I scanned it with my phone I only had a $6.44 balance. I downloaded a second $15 iTunes gift card and that worked out fine. What can I do to get the rest of my credit from my gift card???

    Ilvegesj128@gmail wrote:
    I bought a $15 iTunes gift card and after I scanned it with my phone I only had a $6.44 balance. I downloaded a second $15 iTunes gift card and that worked out fine. What can I do to get the rest of my credit from my gift card???
    Go to your Purchase History:
    http://support.apple.com/kb/HT2727
    and review your purchases to make sure that you should indeed have the balance left you think you should. iTunes doesn't always refresh the balance it shows, so it's possible you spent the money and it just wasn't being reflected in the display. This display error can usually be corrected by logging out of the iTunes Store and then back in. It's also possible that you owed money which would have been paid from that first iTunes card.
    If you confirm that you should have a higher balance left but the iTunes Store isn't showing it correctly, go here:
    iTunes Support
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • 2nd Nuron just stops working?

    Our second Nuron just stopped working.  First one did the same thing.  I had been using it earlier tonight and checking the GPS features.  It has been sitting on the table since then and now it is dead.  Like there is no power.  Nothing will make it turn on or show any life at all.
    VERY Frustrating!!  Aside from some alarm querks it has been a decent phone until it dies for no reason that we can see.
    Has anyone else experienced this?  Is there a fix for this?
    Solved!
    Go to Solution.

    try removing SIM card and memory card. Then plug in the charger.
    Does the Neuron wake up with the charger connected and start charging? It might take a few minutes if your battery was completely dead.
    If yes the if you press and hold the power key can you get it to then power up?
    If no then your Neuron is most likely totally dead
    If it charges, but doesn't power up then it may be some corruption in the SW.

  • Hi, I've tried charging continuously for 72 hours. But to no avail. It just stopped working out of the blue! I had only used it for about 1 month!

    Hi, I've tried charging continuously for 72 hours. But to no avail. It just stopped working out of the blue. Actually I believe I let the battery die off completely. When I tried charging it again, it never worked.
    I had only used it for about 1 month.
    I bought this in January at Best Buy, and still have the receipt. I was on long business trip and just got back. I can't get the 90 day customer service. How can I get this returned to Black Berry, they won't allow me to contact them without providing my credit card for incidence based service.
    Please help! Thanks.

    do any LED color happen when you plug it in?
    if only RED, then pug in until red goes out, wait 6 seconds and plug in again.
    repeat 3 times and wait to see if 5 green flashes while plugged in
    after 5 flahes, leave it plugged in for 90 minutes and it should boot up. if not hold power button down for 20 seconds and try again.
    You have 1 year warranty, choose option other when calling in and not phone support. This is confusing I  know.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory  settings and restored, still no wifi.

    Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory  settings and restored, still no wifi. Will next release of iOS address this problem?

    Hey there kevin8!
    I have an article for you that can help you continue to troubleshoot this issue with the Wi-Fi on your iPhone. The article can be found right here:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Hopefully that will help resolve your issue. Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Satellite A110-195 PSAB0E - sound card has stopped working

    Hello,
    My sound card has stopped working it was working fine but suddenly the sound quality started to faint and finally it stopped working i have tried the following methods:
    Realtek is default audio
    Control Panel/ Sound & Audio Devices/ Audio tab/ Sound Playback click on down arrow and check that the correct audio is selected. Typically the problem will be they something like "modem line 0 playback" might have been substituted for the proper audio device.( Didn't Worked)
    Chipset Utility - install ( Did'n't Worked Aswell)
    Start / Control Panel / Administrative Tools / Component Services / a separate window will open in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot. (Worked) But First The Quality Was Not As It Was Before And Then Sound Card Stopped Working Again.
    Try a System File Check
    go to Run - type "sfc /scannow" No Success.
    I have installed windows again but no success. :(
    Here Is The Detailed Model No. Satellite A110-195
    PSAB0E-00F00KAR
    Windows XP Home Edition SP2

    No It Appears In Device Manager And In Control Panel.
    This Method Worked But The Sound Level Was Not As Good As it Used To Be:
    tart / Control Panel / Administrative Tools / Component Services / a separate window will open in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot.

  • Hi, i have an IPod Touch 4g. One of the earphones just stops working after while,no matter how many times i replace them. What do i do?

    Hi, i bought my IPod 4G about 7 months ago. After about a mont of buying them, one the earphones just stopped working which became extremely annoying..so i bought a new set of earphones and they worked well for about 5/6 months and then one of them stopped working as well. About 2 weeks ago, i bought a new set of earphones and now the right earphone of that has stopped working as well. The thing is, the earphone doesnt just stop working on my IPod, it also stops working on my laptop...and now i am very confused as to where the problem lies. I can't keep buying headphones every other week cos that is just too expensive and i dont know if the problem lies with my IPod or what! The same thing is happening to my sister's IPod as they were purchased at the same time. What do we do??

    This previous discussion discusses the same if not similar problem.
    https://discussions.apple.com/message/6750990#6750990

  • Can't open a dng or raw file in cs5, just stops working. So many problems in cs5!

    I totally feel for you. Just upgraded from cs4 to cs5 and it was the  biggest mistake i ever made. It will probably end my livelihood as a  photographer since EVERY time i open a raw file it crashes photoshop,  makes it freeze up after i have adjuted the file in camera raw then I  hit open; i get a few bars then it just stops working.
    Even got  tech help, which helped when i was on the phone with them. The next day  the problem came back even when I danced the same jig that I did when I  had the guy on the phone - he had me move a raw file on to the desktop  rather than take open from my hard drive, then I was able to open it, so  we came to the conclusion that my drive was corrupt. I had the same  information backed up on a brand new hard drive so we compared files  from the each drive against the other. The files from the new drive  opened successfully. Yesterday. Now Photoshop cs5 doesn't open any raw  or dng files at all from anywhere so it can only be a problem with  photoshop. We thought we had the problem solved but we did not. This  never happened on CS4 unless i was trying to open 30 or more raw files,  and even then it gave me a warning that it had no more ram, it didn't  just lock up and do nothing. I'm at my wit's end. Even though there are a  lot of great new things in cs5, they aren't very useful if you can't  use the product to do the simplest thing.

    1) Install the Photoshop 12.0.1 update
    2) Install the latest ACR update.
    If problems continue after that, then there probably is something wrong with your system.

Maybe you are looking for

  • Creating Editable PDF

    I have created a document in Adobe Acrobat 9 Pro that has several Text fields and Combo Boxes.  My goal is to be able to have this document open in Preview on a mac and or Adobe Reader on PC computers so that clients can fill out a form I started for

  • Why can't my 5S find my bluetooth devices when I had no problem with 4S? any fix?

    Brand new 5S not finding any of my Bluetooth devices. Never had an issue with my 4S. Any sugestions on how to fix without buying new devices?

  • Error while attempting to add Target to JDBCConnectionPool

    WL 6.1 SP5 - When I try to add my local machine as a "target" for my connection pool, I get the following exception: java.lang.reflect.InvocationTargetException: javax.management.RuntimeOperationsException: RuntimeException thrown by the invoke metho

  • Installing 10.6 issues

    My mid-2007 MacBook was running mavericks but it started having some issues so we attempted to re-install. It didn't work and finally the only thing we could get it to install was the original 10.4 it shipped with. Now I am trying to get back to mave

  • Heads up: Adding FlexBuilder help docs for AFCS to Eclipse

    Just a quick note to those of you who run FlexBuilder as the Eclipse plugin rather than the standalone version. If you want the AFCs docs to show up in FlexBuilder/Eclipse help then add them as described in the PDF, but do *not* add them to the plugi