Gifting a playlist does not follow play order or gift all songs

Trying to gift a playlist and had 2 major problems-
1.Each time I click arrow on my playlist to'give playlist' iTunes changes the play order when it transfers to the store for purchase. Each time it sorts in a completely different order. I can't drag the playlist songs when it's transferred to the store. Is there no control for the play order of a gifted playlist?
2.Drops one song from my list even though I added it straight from iTunes as a purchasable single.

Hi leezack,
Have you tried resetting your iPod? To reset an iPod:
First, toggle your iPod's "Hold" switch back and forth a couple of times.
Then, press and hold the Menu and Select (center) buttons together for 5-10 seconds.
If several attempts at resetting your iPod don't help with the issue, then I would agree with what you're considering doing - a restore oftentimes fixes playback issues with iPods, so that's probably the next step to try.
Does this happen with any songs you put on your iPod (like ones that you've imported from CDs), or does your iPod only tend to have issues with playing your iTunes Store purchases?
-Kylene

Similar Messages

  • Cursor selection does not follow chapter order on sub-menu

    I used iMovieHD6 to add chapter markers to my large DVD project. They "shared" very nicely into iDVD8 and the Chapter Selection sub-menus were created nicely.
    The problem is that when I use the cursor arrows on the DVD remote (real or virtual, in or out of iDVD), the highlight jumps around the sub-menu items rather than moving in a logical order. For example, I have 4 sub-menus with 6 chapters in each. Let's use numbers for them starting with the upper left they are 1,2,3 and then at the lower left they begin 4,5,6. I am using the Reflection White theme. When I press the right remote cursor button it will move from 1 to 2 to 5 to 6 to 3 to 4 and back to 1. Note that this order is not the same for each sub-menu, but none of them go 1,2,3,4,5,6.
    I don't know what might be wrong or how to correct it, but I have a really big project that is otherwise perfect and I'd really like to get it out, please help!
    Thanks.

    I just wanted to add this before closing this topic.
    After poking around with the Reflection theme I better understood what Len was talking about. It appears that there are no modifiable parameters in the theme itself that control the order of cursor's motion through the buttons. That I assume is hard-coded into iDVD and follows a pre-programmed logic.
    The point of failure is the position and orientation of the buttons in the Reflection theme's sub-menus when added automatically. They are made to look to the viewer as though they are set on an angled surface and viewed at an angle from above. While our brains can process this effect nicely, iDVD's cursor logic doesn't fare as well.
    The work-around is fairly simple: Realizing that iDVD treats all chapter buttons as though they are two-dimensional objects on a flat surface, you must re-arrange them so that from top-left to bottom-right they follow a logical order, with the first buttons higher and farther left than the later-selected buttons. You don't have to move them very far to get the desired result and it doesn't have to affect the overall appearance of the menu in a noticeable way.
    A slight rearrangement in my case left the overall look of the chapter menu the same but yielded a zig-zag flow through the buttons as follows:
    [1] [3] [5]
    [2] [4] [6]
    Pressing the right cursor key jumps from top left to bottom left to top center then bottom center then top right and finally bottom right before going back to the start. Granted this is not quite "right" in that if iDVD could "see" the menu the way my brain does it would go left to right across the upper row of buttons rather than zig-zagging, but I figure that as long as the user can understand how to get to the button they want it'll be fine.
    If you really need your menu selection to move linearly left to right with those arrows and with the up/down arrow used to move it vertically, then you have to arrange the buttons on the menu in a rectangular pattern with the top of each row of buttons all in a nice horizontal line. Note that's not the same as the alignment line that Reflection provides for you, it's a true horizontal line in relation to the monitor screen.
    I'd much prefer that iDVD revisit the logic of the cursor control code, perhaps adding the choice of allowing the numerical sequence of the chapters to dictate the order of the cursor's motion rather than their relative position on the screen, but since they don't call me for advice, the above will likely have to do.

  • TS1436 Burn does not go in order of playlist

    I have created a playlist to burn to a CD....it does not burn in order.  What is wrong:

    Which player? My Nomad Jukebox plays alphabetically if I just select an artist, but if I open an artist and select an album, it's by album order.

  • Report Does Not Follow Select Column Order

    Hi all,
    Apex 2.2 on 10gXE
    I always encounter this problem, the display column on report does not follow the select column sequence order in the "region source".
    It is very tedious clicking the up/down arrow one-by-one in the "report attributes" especially if the display columns are plenty like 40 columns.
    Is there a fix/patch or alternative tips for this bug?
    Thanks a lot,
    Edited by: 843228 on May 24, 2011 10:32 PM

    Apex 2.2 on 10gXEStart by upgrading from this old unsupported version.
    >
    I always encounter this problem, the display column on report does not follow the select column sequence order in the "region source".
    It is very tedious clicking the up/down arrow one-by-one in the "report attributes" especially if the display columns are plenty like 40 columns.
    Is there a fix/patch or alternative tips for this bug?
    >
    This is not a bug. APEX maintains the original column order of the report. This avoids problems downstream in areas like the processing of <tt>g_fnn</tt> arrays in declarative tabular forms, where the assigned arrays are column-order dependent.
    APEX 4.x fixes column ordering bugs that could lead to report corruption, and includes drag-and-drop column ordering in the new tree view in addition to the up/down arrow re-ordering.
    If you really want column order to follow that in the source query, the workaround is to create a new report using the modified query.

  • Process does not follow the routing ends up in complete status

    Installed Adobe LiveCycle server ES 2.5 with SQL Server 2008 as database
    And followed the tutorial ‘Create Your First LiveCycle Application’
    Deployed it on the server when I test the same
    i.e. when the workspace user fills in form details and hits complete button it ends up as status complete
    And not assigned to next user in the route
    The process does not follow the routing it ends up in complete status
    And nothing shows up when trying to record and play back the process
    Tried invoking Via workbench too
    no errors in the server log
    Could this be an installation issue any pointers appreciated
    Please advise

    Issue with Jboss as it was taking longtime time to start due to low CPU ideally it should not take more than 3 to 5 minutes
    Process works now

  • In-list: does oracle follow the order of the items in the in-list?

    We have a partition table, each partition has one day's data. And we are using 4 partitions, every day the oldest partition will be truncated so that it could be reused next day. Some data will be sit in more than 1 partitions, and we need to get the newest data. The current partition has a partition_key=MOD(TRUNC(SYSDATE) - TO_DATE('01-JAN-2005', 'DD-MON-YYYY') + 1, 4).
    If oracle obeys the order of the items in the in-list, then the following sql should work and has the least cost. But I am not sure whether oracle run time engine will obey the order. I recalled Lewis had said run time engine might not follow the plan in the execution plan (explain plan).
    select *
      from tab
    where id=:id and partition_key in
           (MOD(TRUNC(SYSDATE) - TO_DATE('01-JAN-2005', 'DD-MON-YYYY') + 1, 4),
            MOD(TRUNC(SYSDATE) - TO_DATE('01-JAN-2005', 'DD-MON-YYYY') , 4),
            MOD(TRUNC(SYSDATE) - TO_DATE('01-JAN-2005', 'DD-MON-YYYY') -1, 4),
            MOD(TRUNC(SYSDATE) - TO_DATE('01-JAN-2005', 'DD-MON-YYYY')-2, 4)) and rownum=1;If oracle doesn't follow the order in the in-list, does oracle follow the order of subquery in "union all", such as
    select * from
           select * from tab where where id=:id and partition_key =MOD(TRUNC(SYSDATE) - TO_DATE('01-JAN-2005', 'DD-MON-YYYY') + 1, 4)
              union all
           select * from tab where where id=:id and partition_key =MOD(TRUNC(SYSDATE) - TO_DATE('01-JAN-2005', 'DD-MON-YYYY') , 4)
              union all
           select * from tab where where id=:id and partition_key =MOD(TRUNC(SYSDATE) - TO_DATE('01-JAN-2005', 'DD-MON-YYYY') - 1, 4)
              union all
           select * from tab where where id=:id and partition_key =MOD(TRUNC(SYSDATE) - TO_DATE('01-JAN-2005', 'DD-MON-YYYY') - 2, 4)
    where rownum=1

    Is there an Oracle version number on your database?
    Is "Lewis" Jonathan Lewis? If so please post a link to his comment so we can read it and understand what you are referring to.
    If your table is indeed partitioned then please post the DDL that created it ... not every column but at least the partition key
    and the partioning template.
    Please also post your explain plan report generated from your DML statements by dbms_xplan.display.
    We can not help with what we can not see.

  • Youtube does not stop playing?

    Hi,
    I'm able to embed the youtube videos through iAd Producer in order to include as a widget that's in iBooks Author. They play on the iPad in iBooks fine. However, when I close the full screen widget without tapping the pause button, the video does not stop playing. The screen will go back to the text of the book but the sound of the video keeps playing until it ends. I have to swipe two pages away for it to end.
    Is there a way for it to automatically end when closing the widget?
    Thanks!

    That sounds like a bug in iBooks. I'd report it at bugreport.apple.com.

  • I have an iphone 5s and when I make a playlist on itunes for music videos and sync my iphone the playlist does not show up. What can I do to fix the problem?

    I have an iphone 5s and when I make a playlist on itunes for music videos and sync my iphone the playlist does not show up. What can I do to fix the problem?

    Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
    http://www.apple.com/itunes/download/

  • I have consolidate my folders related to the video I am in the progress of working on.  Premiere elements does not follow their new location.  How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

    I have consolidate my folders related to the video I am in the progress of working on.  Premiere elements does not follow their new location.  How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

    This is the Photoshop Elements forum, not the Premiere Elements forum, located here:
    https://forums.adobe.com/community/premiere_elements
    When you open the project, it should ask you where the first file is located. After you tell it where it is, it should be able to find the rest of them if they are located near the first one.  Then save the file.  If you move the files again, you will have to relink them again.

  • Settlement rule does not exists in order number.

    Hi All,
    I have been recieving a error while trying to save the Production order. The error reads as "Settlement rule does not exixts in order". But fact is that order has settlement rule. Also there is a default setting done in order type settlement profile because of which settlement rule is created automatically.
    Now there is a way around. We calculate cost manually and then we go to settlement rule and check for error. Once we do so the order is good to save.
    But we are not able to save it automaticaaly after release. This issue occurs when we try to release the order and then after releasing the order we try to save it.
    Please help us on this issue.

    Hi Prabhakar,
    Thanks for your input. But the said setting was already done while implementation. All the material except this material has the issue. We are able to realease the order properly for the material except this one. And since go live we are using this material for first time.
    We did a work around. We copied this material and recreated a new material with reviced part number. That one is working fine in lower client. We have now no idea how could one material all the same data like material master and routing and BOM and work centers can work properly whicle failing for other.
    We are trying to debug this will let you all know if we find the solution. Till then if you all have any idea any prior experience, please let me know.

  • HT2736 I can't use my Australian iTunes Card on my Australian laptop. I get a message saying "Your iTunes store (US) does not match  that of your gift certificate (Australian)".

    I can't use my Australian iTunes Card on my Australian laptop.
    I get a message saying:
    "Your iTunes store (US) does not match  that of your gift certificate (Australian)".

    You can't redeem that certificate in another country's store. You also can't change the iTunes Store country with an unspent balance.
    (72677)

  • VO does not follow anchor link

    I find it strange that VocieOver in Mac OS X (10.5.8) does not follow anchor links. The W3C specification documents and Wikipedia use them a lot; however the VoiceOver box does not follow the link while Safri jumps to that part of the page.
    Is this a miss configuration at my part or has it been designed that way?
    Thanks

    Hi there
    Your description seems to imply you are narrating at the same time as you are recording. This isn't best practice. Your best results will be obtained by adding the audio as a separate activity after you have recorded the screen action.
    Often in a web recording we notice what is perceived as a  mismatch. Often you end up with blank slides. This is because Captivate is running on your local PC (and running very quickly). But when you click a link to a web page, what really happens is that you send a command from your PC across the internet to a Web Server. The Web Server has to process that command, look up the desired page, send the page across the internet to your PC and it finally displays. While it may seem that it happens swiftly, compared to Captivate running on the PC it takes eons.
    Cheers... Rick
    Click here for Adobe Certified Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • Your iTunes store ([?]) does not match that of the gift certificate ([?])

    My iPad was purchased and registered in the USA. I am on a temporary assignment in Mexico. I purchased a iTunes gift card. When I tried to redeem it I get an error message. "Your iTuens store ([?]) does not match that of the gift certificate ([?])". I seen on another post that I need to change my region. I did that and still get the same error. Any help is much appreciated.
    Thank you,
    NFREEMA7

    If you have a US iTunes account, you cannot use a gift card
    from Mexico in that US account. Additionally, you are supposed
    to be in the US when using your US account.

  • Your iTunes store(Kuwaiti) does not match that of the gift certificate(us)

    when i entered gift card number i have got this error what should i do ?

    your iTunes store(Kuwaiti) does not match that of the gift certificate(us)
    The Complete Guide to Using the iTunes Store | iLounge Article < "Gift Cards and Gift Certificates may only be redeemed in the country in which they were purchased."

  • Edu Version does not appear in order history

    Hello,
    I'm Stephanie and I ordered the educational version of the creative cloud for students, but it does not appear in my order history or somewhere else.
    I don't have uploaded any proof of my educational status as a student, could this be the problem? I tried, but I don't have an order number.
    please help me
    Yours Sincerly
    Stephanie
    P.S.
    there also came no confirmation email for the purchase, just the verify email for the email adress

    Hello Ankit,
    I placed my order yesterday on www.adobe.com <http://www.adobe.com> , I assume that my credit card isn’t charged yet.
    Could it be possible that my order didn’t gone thru?
    Yours Sincerely
    Stephanie
    Von: Ankit Khurana [email protected]
    Gesendet: Dienstag, 4. Juni 2013 20:23
    An: Virusmood
    Betreff: Edu Version does not appear in order history
    Re: Edu Version does not appear in order history
    created by Ankit Khurana <http://forums.adobe.com/people/Ankkhura%40adobe.com>  in Adobe Creative Cloud - View the full discussion <http://forums.adobe.com/message/5378898#5378898

Maybe you are looking for