Gigabit connections for the WRT610N??

One more question (for tonight).
I must be missing something here but the 2 pcs that I have gigabit NICs in would not connect to the router/switch at 1Gbps. They would only connect 100Mbps.
Hopefully this is something simple I am missing.
Thanks,
Chris

Check the Device Manager if the Ethernet Adapter's are really gigabit enabled...
If they are gigabit adapter's then right click on the Adapter and click on Properties, here click on the Advanced tab and change the speed, you should have the option to change the speed to support gigabit connection...

Similar Messages

What is Microsoft Document Connection for the Mac? What does it do?

What is Microsoft Document Connection for the Mac? What does it do?

http://lmgtfy.com/?q=What+is+Microsoft+Document+Connection+for+mac

JCo connection for the application data

Dear All,
Now, we configure BP for MSS. When we set JCo connection for the application data, from this link http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm we selected the method "Ticket".
When we run the page in "Team" area, we found some errors as follow:
- You do not have the authorization to start service sap.com/pcui_gp~isr/IsrStatusoverview
- You do not have the authorization to start service sap.com/mssreccand/CandidateStatusOverview
- Pages about "Employee Information" display Blank iViews.
But if we set JCo connection for application data by using "User/Password" method (UserID have "SAP_ALL" profile in back-end system), the application work fine.
Kindy advise us which method should be used to set JCo connection (Ticket or User/Password).
If the method should be "User/Password", please advise authorization and user type for UserID that be used to map JCo connection.
Thank you very much,
Anek.

Hi,
Go through the contents in,
http://help.sap.com/saphelp_ep60sp2/helpdata/en/8f/67d27676ace84080964d4c4223bb3c/content.htm
Hope this helps !
Regards
Srinivasan T

Try to connect oracle in portal 4.0 and cannot create database connection for the realm

hello,
i have try to use the method in configuring Weblogic Portal for Oracle Database.
I have made all with no problems
but when i stop and i start the weblogic portal i have this error
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException
: An error occured creating a database connection for the realm.]
Any one have a solution? Thx!

Jean-Philippe,
This usually is due to a DB configuration issue. Check your RDBMS realm
username, password and driver properties. Check your database is running and
have enough Connection free.
Sincererly,
Daniel Selman
"jpmeert" <[email protected]> wrote in message
news:3c88e867$[email protected]..
>
hello,
i have try to use the method in configuring Weblogic Portal for OracleDatabase.
>
I have made all with no problems
but when i stop and i start the weblogic portal i have this error
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException
: An error occured creating a database connection for the realm.]
Any one have a solution? Thx!

How can I delete photos from my ipad that came in when I connected for the first time to my pc?

how can I delete photos from my ipad that came in when I connected for the first time to my pc? HELP

Photos that were synced from your computer using iTunes can only be deleted by de-selecting them from the folder from where they were synced - and then re-syncing.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Photos Tab on the right.
If you want to remove all of the Photos - uncheck the Sync Photos from Heading
Click on Apply in the lower right corner of iTunes
If you are using iTunes 11 - this will be helpful, Setting up syncing in Windows.
http://support.apple.com/kb/PH12313

Why is face time not connecting for the last two days

Why is Face Time not connecting for the last two days

Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue. You can leave feedback for Apple at the link below.
http://www.apple.com/feedback/

Oracle XE 10g connect for the first time

I have just installed Oracle10 g express edition on Windows XP service pack 3, when trying to connect for the first time
I get the ORA-12631 message error when trying to connect!!
SQL> connect system
Immettere la password:
ERROR:
ORA-12631: Recupero nome utente non riuscito
Can anyone help me?

sorry here is:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\>set
ALLUSERSPROFILE=C:\Documents and Settings\All Users
ambiente=AC
APPDATA=C:\Documents and Settings\UR00780.HD01\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=ACMI1252
ComSpec=C:\WINDOWS\system32\cmd.exe
cstella=VERONA
FP_NO_HOST_CHECK=NO
fserver=ACSWDWV01
HOMEDRIVE=H:
HOMEPATH=\
HOMESHARE=\\acnas200.intranet.unicredit.it\UR00780
KITID=AC
LOGONSERVER=\\USADSW340
LSERVER=ACSWDWV01.hd01.unicreditgroup.eu
NUMBER_OF_PROCESSORS=2
OS=Windows_NT
Path=C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program
Files\Microsoft SQL Server\80\Tools\BINN;C:\Program Files\IBM\Personal Communications\;C:\Program Files\IBM\Trace Facil
ity\;C:\Program Files\Symantec\pcAnywhere\;C:\PROGRA~1\IBM\CLIENT~1;C:\PROGRA~1\IBM\CLIENT~1\Shared;C:\Program Files\Int
el\DMIX;c:\Program Files\Microsoft SQL Server\90\Tools\binn\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PCOMM_Root=C:\Program Files\IBM\Personal Communications\
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 37 Stepping 2, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=2502
ProgramFiles=C:\Program Files
PROMPT=$P$G
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\UR0078~1.HD0\LOCALS~1\Temp
TMP=C:\DOCUME~1\UR0078~1.HD0\LOCALS~1\Temp
USERDNSDOMAIN=HD01.UNICREDITGROUP.EU
USERDOMAIN=HD01
USERNAME=UR00780
USERPROFILE=C:\Documents and Settings\UR00780.HD01
windir=C:\WINDOWS
C:\>

I m not able to connect for the wifi which i have used earlier ,i m getting an error as unable to join the network how to resolve this please help me

i m not able to connect for the wifi which i have used earlier ,i m getting an error as unable to join the network how to resolve this please help me

We were able to log in this morning and all is working. You should be able to log in at any point today. Please let us know if you are having any other difficulties.

Multiple connections for the same user.

I have EJB A and EJB B. A and B use a JCA connector that
I have written. I have matchManagedConnections set so that if user U has not used EJB A or EJB B, then a new ManagedConnection is created. If user U has used A or B then that user is given a new virtual connection created from an existing ManagedConnection. Now the problem is that if user U access' A for the first time and then access' B BEFORE A has closed the connection, then a new ManagedConnection is created for user U. Therefore in this case user U gets 2 ManagedConnections to the EIS that we are using. Eventually one of the ManagedConnections is distroyed but I would like to eliminate this in the first place. How do a get Weblogic to see that a user has a ManagedConnection before that user is done with the connection.

You can't have multiple roles on multiple connection, as you are connecting to the same website (different sub directories) ultimately.
Here is the workaround:-
You can create a new user account on your machine and can manage different roles.
Hope it helps.

Can I use my IMac OS 10.4 (old) to set up a wifi router, such as Airport Base, so I can have a wifi connection for the iPhone I plan to buy? My IMac is not wifi capable.

Can I use my several-years-old IMac OS 10.4 to set up a wireless router, such as Aiport Base, so I can have wifi for the iPhone I plan to buy. My IMac is not wife capable.

Yes, Airport Express Base Station connected to your Mac by ethernet will work as a bridge. Or you can connect the AE directly to your router/modem by ethernet if it's a non-wi-fi router and it will act as a relay for that.

Proble while creating new Data Connection for the Webservice

Hai All,
when creating a new Data Conneciotn for the Webservice in the interactive form i got the following errror
Cannot choose this operation:
- there is no associated SOAP Binding
edit -> new Data Connection -> WSDL -> i entered the wsdl url -> i got the methods in that webservice
but when i select one of the method in the methods list i got above error
i developed a webservice in NWDS and deployed the WAS ( created a webservice for the session bean)
please help me to solve the problem
Thanks in advance
Siva Sankar N

Problem was solved,
Downloading the WSDLs:
Download the 3 WSDL files from the WAS using the WS-navigator tool:
Go to http://<was-host>:50000/wsnavigator/enterwsdl.html
Select your WS
Click in the menu WSDLs
Download the default SAP WSDL
You will have 3 WSDL files in the downloaded zip files.
1) main.wsdl
2)config1_XXXXVi_document.wsdl
3_configl_document.wsdl
Perform the follwing task to the above wsdl files, and use this wsdl files to the datasource
1. Copy/paste the <wsdl:service> XML element from the main.wsdl to the Config1_SDN_adobeWSVi_document.wsdl.
2. Copy the <wsdl:binding> XML element from the Config1_document.wsdl to the Config1_SDN_adobeWSVi_document.wsdl.
3. Add the SOAP namespace (xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/") from the main.wsdl to the Config1_SDN_adobeWSVi_document.wsdl.
4. Adjust the namespace reference by replacing prt0 and bns0 with tns.

Getting Connected for the First Time with JDBC

Hello everyone. I am trying to make my first database connection to a mysql database with Java. I am using jdk 1.5.0, MySQL 4.1.11 nt, and I think I have the freshly downloaded driver C:\jdk1.5.0\jre\lib\ext\mysql-connector-java-3.0.16-ga-bin.jar" installed in the right spot. When I try to run the following code...
package dbfinder;
import java.sql.*;
import javax.sql.*;
import com.sun.rowset.JdbcRowSetImpl;
import javax.sql.rowset.JdbcRowSet;
import java.sql.ResultSetMetaData;
* Title: 
* Description: 
* Copyright: Copyright (c) 2005
* Company: 
* @author not attributable
* @version 1.0
public class DatabaseConnector {
public DatabaseConnector() {
public static void main(String args[]){
Connection connection;
Statement statement;
// ResultSet resultSet;
// ResultSetMetaData metaData;
String DATABASE_DRIVER = "com.mysql.jdbc.Driver";
String DATABASE_URL = "jdbc:mysql://localhost/state_crime";
String USER = "cis695d";
String PASSWORD = "cis695d";
JdbcRowSet rowSet = new JdbcRowSetImpl();
try {
Class.forName(DATABASE_DRIVER); // load database driver
System.out.println("class loaded");
rowSet.setUrl("DATABASE_URL");
rowSet.setUsername(USER);
rowSet.setPassword(PASSWORD);
rowSet.setCommand("Select * FROM state_crime_rates");
rowSet.execute();
ResultSetMetaData metaData = rowSet.getMetaData();
int numberOfColumns;
numberOfColumns = metaData.getColumnCount();
System.out.println(numberOfColumns);
} catch(SQLException sqlException){
sqlException.printStackTrace();
System.exit(1);
catch(ClassNotFoundException classNotFound){
classNotFound.printStackTrace();
System.exit(1);
I get the following exception...
java.sql.SQLException: No suitable driver
 at java.sql.DriverManager.getConnection(DriverManager.java:545)
 at java.sql.DriverManager.getConnection(DriverManager.java:171)
 at com.sun.rowset.JdbcRowSetImpl.connect(JdbcRowSetImpl.java:618)
 at com.sun.rowset.JdbcRowSetImpl.prepare(JdbcRowSetImpl.java:630)
 at com.sun.rowset.JdbcRowSetImpl.execute(JdbcRowSetImpl.java:526)
 at dbfinder.DatabaseConnector.main(DatabaseConnector.java:44)
Does anyone have any ideas? Is it my code? Is there a different driver I should use? Any help would be greatly appreciated.

Hello everyone. I am trying to make my first
database connection to a mysql database with Java. I
am using jdk 1.5.0, MySQL 4.1.11 nt, and I think I
have the freshly downloaded driver
C:\jdk1.5.0\jre\lib\ext\mysql-connector-java-3.0.16-ga
-bin.jar" installed in the right spot. You shouldn't be putting that JAR in jre/lib/ext, even if you've found some docs to tell you to do it. Only language extensions (e.g., packages that begin w/javax) belong there.
I get the following exception...
java.sql.SQLException: No suitable driver
Does anyone have any ideas? Is it my code? Is there
a different driver I should use? Any help would be
greatly appreciated.The driver is correct. The class loader found it, even though I think you should use the -classpath option to find the JAR.
It's your code.
What are you doing with all that RowSet stuff?
This works. Study it:
import java.sql.*;
import java.util.*;
* Command line app that allows a user to connect with a database and
* execute any valid SQL against it
public class DataConnection
 public static final String DEFAULT_DRIVER = "sun.jdbc.odbc.JdbcOdbcDriver";
 public static final String DEFAULT_URL = "jdbc:odbc:DRIVER={Microsoft Access Driver (*.mdb)};DBQ=c:\\Edu\\Java\\Forum\\DataConnection.mdb";
 public static final String DEFAULT_USERNAME = "admin";
 public static final String DEFAULT_PASSWORD = "";
 public static final String DEFAULT_DRIVER = "com.mysql.jdbc.Driver";
 public static final String DEFAULT_URL = "jdbc:mysql://localhost:3306/hibernate";
 public static final String DEFAULT_USERNAME = "admin";
 public static final String DEFAULT_PASSWORD = "";
 /** Database connection */
 private Connection connection;
 * Driver for the DataConnection
 * @param command line arguments
 * <ol start='0'>
 * <li>SQL query string</li>
 * <li>JDBC driver class</li>
 * <li>database URL</li>
 * <li>username</li>
 * <li>password</li>
 * </ol>
 public static void main(String [] args)
 DataConnection db = null;
 try
 if (args.length > 0)
 String sql = args[0];
 String driver = ((args.length > 1) ? args[1] : DEFAULT_DRIVER);
 String url = ((args.length > 2) ? args[2] : DEFAULT_URL);
 String username = ((args.length > 3) ? args[3] : DEFAULT_USERNAME);
 String password = ((args.length > 4) ? args[4] : DEFAULT_PASSWORD);
 System.out.println("sql : " + sql);
 System.out.println("driver : " + driver);
 System.out.println("url : " + url);
 System.out.println("username: " + username);
 System.out.println("password: " + password);
 db = new DataConnection(driver, url, username, password);
 System.out.println("Connection established");
 Object result = db.executeSQL(sql);
 System.out.println(result);
 else
 System.out.println("Usage: db.DataConnection <sql> <driver> <url> <username> <password>");
 catch (SQLException e)
 System.err.println("SQL error: " + e.getErrorCode());
 System.err.println("SQL state: " + e.getSQLState());
 e.printStackTrace(System.err);
 catch (Exception e)
 e.printStackTrace(System.err);
 finally
 if (db != null)
 db.close();
 db = null;
 * Create a DataConnection
 * @throws SQLException if the database connection fails
 * @throws ClassNotFoundException if the driver class can't be loaded
 public DataConnection() throws SQLException,ClassNotFoundException
 this(DEFAULT_DRIVER, DEFAULT_URL, DEFAULT_USERNAME, DEFAULT_PASSWORD);
 * Create a DataConnection
 * @throws SQLException if the database connection fails
 * @throws ClassNotFoundException if the driver class can't be loaded
 public DataConnection(final String driver,
 final String url,
 final String username,
 final String password)
 throws SQLException,ClassNotFoundException
 Class.forName(driver);
 this.connection = DriverManager.getConnection(url, username, password);
 * Get Driver properties
 * @param database URL
 * @return list of driver properties
 * @throws SQLException if the query fails
 public List getDriverProperties(final String url)
 throws SQLException
 List driverProperties = new ArrayList();
 Driver driver = DriverManager.getDriver(url);
 if (driver != null)
 DriverPropertyInfo[] info = driver.getPropertyInfo(url, null);
 if (info != null)
 driverProperties = Arrays.asList(info);
 return driverProperties;
 * Clean up the connection
 public void close()
 close(this.connection);
 * Execute ANY SQL statement
 * @param SQL statement to execute
 * @returns list of row values if a ResultSet is returned,
 * OR an altered row count object if not
 * @throws SQLException if the query fails
 public Object executeSQL(final String sql) throws SQLException
 Object returnValue;
 Statement statement = null;
 ResultSet rs = null;
 try
 statement = this.connection.createStatement();
 boolean hasResultSet = statement.execute(sql);
 if (hasResultSet)
 rs = statement.getResultSet();
 ResultSetMetaData meta = rs.getMetaData();
 int numColumns = meta.getColumnCount();
 List rows = new ArrayList();
 while (rs.next())
 Map thisRow = new LinkedHashMap();
 for (int i = 1; i <= numColumns; ++i)
 String columnName = meta.getColumnName(i);
 Object value = rs.getObject(columnName);
 thisRow.put(columnName, value);
 rows.add(thisRow);
 returnValue = rows;
 else
 int updateCount = statement.getUpdateCount();
 returnValue = new Integer(updateCount);
 finally
 close(rs);
 close(statement);
 return returnValue;
 * Close a database connection
 * @param connection to close
 public static final void close(Connection connection)
 try
 if (connection != null)
 connection.close();
 connection = null;
 catch (SQLException e)
 e.printStackTrace();
 * Close a statement
 * @param statement to close
 public static final void close(Statement statement)
 try
 if (statement != null)
 statement.close();
 statement = null;
 catch (SQLException e)
 e.printStackTrace();
 * Close a result set
 * @param rs to close
 public static final void close(ResultSet rs)
 try
 if (rs != null)
 rs.close();
 rs = null;
 catch (SQLException e)
 e.printStackTrace();
 * Close a database connection and statement
 * @param connection to close
 * @param statement to close
 public static final void close(Connection connection, Statement statement)
 close(statement);
 close(connection);
 * Close a database connection, statement, and result set
 * @param connection to close
 * @param statement to close
 * @param rs to close
 public static final void close(Connection connection,
 Statement statement,
 ResultSet rs)
 close(rs);
 close(statement);
 close(connection);
}%

"Get connected" for the dummies please!

Hello,
I bought this Palm TX more than a year ago and although my numerous efforts, still can't get connected to the internet. Would anybody tell me how to get connected in simple steps please?
Please note the following:
- My laptop uses Windows Vista and WiFi enabled
- I am connected to broadband internet through a normal (not wireless) router
- I don't have any home networks
Thank you
Post relates to: Palm TX

The TX is designed to connect to a wireless network. Wifi is built into it for this purpose, and is very easy to use! Wireless routers can be found for around $30 these days.
Since you have no wireless network, you are limited to connecting via BlueTooth through a cell phone, or via the Hotsync cable to your computer. The latter can be accomplished by purchasing a program called Softick PPP from softick.com. (You can also use BlueTooth to connect if your computer has BlueTooth built into it.)
I have connected mine through a cellphone and with my wireless network at home, but never via the cable. It just didn't make sense to me to use my TX when a real computer is 3' away...
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Can any1 help me fix my internet connection on the facebook app it says there is no connection for the news feed but i can do everything else on the internet

can any1 help me with the internet on my iphone 3gs it says no connection on the facebook news feed but all the other internet stuff works

Contact the develpers of that app, which is not an Apple product for support. You can find the developer contact info in the description of that app in the App Store or Google it.

Wifi "unable to connect" for the past month

I have not been able to connect to my home wifi for the past month. It keeps popping up saying that it is unable to connect. sometimes it will work, but only for 2 minutes tops. My roommate uses the same internet connection and she said that she has not had a problem with it. I have tried rebooting it, turning it on airplane mode then resetting network settings and rebooting it, forgetting the network, and even resetting my entire phone. nothing will work. but my phone connects to the wifi at work and works perfectly fine. SOMEONE PLEASE HELP

The router in 99.99% of the time may be fine and see and connect to the devices it detects. However after certain updates to phones it has been said that the phone will not connect to the router.
There was a list of known routers on this forum that just did not work. The so!ution was to either reset the broadband modem, wireless router and turn off the phone.
Then if it connects your problem is solved. If it doesn't your next step is to see if there are firmware updates for the modem and the router. (Mainly routers) if it still does not connect a new router not on the non working list should be purchased. Yes its another expense but if you want the device to connect that is your option.
Another trick you can use is to change the security from WEP to WPA, PSK or WPA 2 and change the password to the router.
Some people stated a password of at least 9 figures / digits worked great.
If you placed the phone on its own IP address that also has been known to work.
However its best to talk to tech support at the router maker to assist.
Good Luck

Gigabit connections for the WRT610N??

Similar Messages

Maybe you are looking for