Gigaware 1.5 inch Digital Photo Keychain claims it works on a Mac.

Good morning, I hope I have the right forum. My new Gigaware 1.5 inch Digital Photo Keychain claims it works on a Mac. Last night a CD appeared on desktop but it didn't execute after I clicked on it. I looked on Google but can only find a Windows Driver. Is there OSX Leopard one somewhere? Thanks

I hope all this helps. Keychain is connected via USB. Last night there was a CD icon on the desktop but nothing ran. Now the info displays:
USB Bus:
  Host Controller Location:          Built In USB
  Host Controller Driver:          AppleUSBUHCI
  PCI Device ID:          0x2831
  PCI Revision ID:          0x0003
  PCI Vendor ID:          0x8086
  Bus Number:          0x3d
USB Bus:
  Host Controller Location:          Built In USB
  Host Controller Driver:          AppleUSBUHCI
  PCI Device ID:          0x2835
  PCI Revision ID:          0x0003
  PCI Vendor ID:          0x8086
  Bus Number:          0x3a
USB Bus:
  Host Controller Location:          Built In USB
  Host Controller Driver:          AppleUSBUHCI
  PCI Device ID:          0x2834
  PCI Revision ID:          0x0003
  PCI Vendor ID:          0x8086
  Bus Number:          0x1a
Bluetooth USB Host Controller:
  Product ID:          0x8206
  Vendor ID:          0x05ac  (Apple Inc.)
  Version:          19.65
  Speed:          Up to 12 Mb/sec
  Manufacturer:          Apple Inc.
  Location ID:          0x1a100000
  Current Available (mA):          500
  Current Required (mA):          0
USB Bus:
  Host Controller Location:          Built In USB
  Host Controller Driver:          AppleUSBUHCI
  PCI Device ID:          0x2830
  PCI Revision ID:          0x0003
  PCI Vendor ID:          0x8086
  Bus Number:          0x1d
USB Bus:
  Host Controller Location:          Built In USB
  Host Controller Driver:          AppleUSBUHCI
  PCI Device ID:          0x2832
  PCI Revision ID:          0x0003
  PCI Vendor ID:          0x8086
  Bus Number:          0x5d
IR Receiver:
  Product ID:          0x8242
  Vendor ID:          0x05ac  (Apple Inc.)
  Version:          0.16
  Speed:          Up to 1.5 Mb/sec
  Manufacturer:          Apple Computer, Inc.
  Location ID:          0x5d100000
  Current Available (mA):          500
  Current Required (mA):          100
USB High-Speed Bus:
  Host Controller Location:          Built In USB
  Host Controller Driver:          AppleUSBEHCI
  PCI Device ID:          0x283a
  PCI Revision ID:          0x0003
  PCI Vendor ID:          0x8086
  Bus Number:          0xfa
USB2.0 Hub:
  Product ID:          0x0608
  Vendor ID:          0x05e3  (Genesys Logic, Inc.)
  Version:          7.02
  Speed:          Up to 480 Mb/sec
  Location ID:          0xfa400000
  Current Available (mA):          500
  Current Required (mA):          100
HP LaserJet P1006:
  Product ID:          0x3e17
  Vendor ID:          0x03f0  (Hewlett Packard)
  Version:          1.00
  Serial Number:          AB022W7
  Speed:          Up to 480 Mb/sec
  Manufacturer:          Hewlett-Packard
  Location ID:          0xfa440000
  Current Available (mA):          500
  Current Required (mA):          98
DeskJet 930C:
  Product ID:          0x1204
  Vendor ID:          0x03f0  (Hewlett Packard)
  Version:          1.00
  Serial Number:          MX13A1D023JJ
  Speed:          Up to 12 Mb/sec
  Manufacturer:          Hewlett-Packard
  Location ID:          0xfa430000
  Current Available (mA):          500
  Current Required (mA):          2
EPSON Scanner:
  Product ID:          0x0119
  Vendor ID:          0x04b8  (Seiko Epson Corp.)
  Version:          1.00
  Speed:          Up to 480 Mb/sec
  Manufacturer:          EPSON
  Location ID:          0xfa410000
  Current Available (mA):          500
  Current Required (mA):          2
USB to ATA/ATAPI bridge:
  Capacity:          1.36 TB
  Removable Media:          Yes
  Detachable Drive:          Yes
  BSD Name:          disk1
  Product ID:          0x2329
  Vendor ID:          0x152d  (JMicron Technology Corp.)
  Version:          1.00
  Serial Number:          9204FFFFFFFF
  Speed:          Up to 480 Mb/sec
  Manufacturer:          JMicron
  Location ID:          0xfa200000
  Current Available (mA):          500
  Current Required (mA):          2
  Mac OS 9 Drivers:          No
  Partition Map Type:          GPT (GUID Partition Table)
  S.M.A.R.T. status:          Not Supported
  Volumes:
Time Machine Backups 2010:
  Capacity:          1.36 TB
  Available:          803.14 GB
  Writable:          Yes
  File System:          Case-sensitive Journaled HFS+
  BSD Name:          disk1s2
  Mount Point:          /Volumes/Time Machine Backups 2010
USB High-Speed Bus:
  Host Controller Location:          Built In USB
  Host Controller Driver:          AppleUSBEHCI
  PCI Device ID:          0x2836
  PCI Revision ID:          0x0003
  PCI Vendor ID:          0x8086
  Bus Number:          0xfd
Built-in iSight:
  Product ID:          0x8502
  Vendor ID:          0x05ac  (Apple Inc.)
  Version:          1.55
  Serial Number:          9077786E76D060CA (03.01)
  Speed:          Up to 480 Mb/sec
  Manufacturer:          Apple Inc.
  Location ID:          0xfd400000
  Current Available (mA):          500
  Current Required (mA):          500
Keyboard Hub:
  Product ID:          0x1006
  Vendor ID:          0x05ac  (Apple Inc.)
  Version:          94.15
  Serial Number:          000000000000
  Speed:          Up to 480 Mb/sec
  Manufacturer:          Apple, Inc.
  Location ID:          0xfd100000
  Current Available (mA):          500
  Current Required (mA):          300
Apple Optical USB Mouse:
  Product ID:          0x0304
  Vendor ID:          0x05ac  (Apple Inc.)
  Version:          1.10
  Speed:          Up to 1.5 Mb/sec
  Manufacturer:          Primax Electronics
  Location ID:          0xfd130000
  Current Available (mA):          100
  Current Required (mA):          100
Apple Keyboard:
  Product ID:          0x0220
  Vendor ID:          0x05ac  (Apple Inc.)
  Version:          0.69
  Speed:          Up to 1.5 Mb/sec
  Manufacturer:          Apple, Inc
  Location ID:          0xfd120000
  Current Available (mA):          100
  Current Required (mA):          20
Thanks

Similar Messages

  • .WMV 15 inch Digital Photo Frame

    please recommend a 15 inch digital photo frame that plays .WMV files good.

    please recommend a 15 inch digital photo frame that plays .WMV files good.

  • Font for photo info does not work on this MAC

    We are running a new MAC (OS 10.6.2, 2.66 GHz Quad) with Lightroom 2.6.  When I try to add photo data to a contact print, I see a series of boxes with AAAs.  I got the same result with the Identy Plate when I changed the font.  I changed to another font and it was fine.  This leads me to believe the default font for photo info is not supported on this machine.  We really need to use the photo info feature.  Is there a way to either
    1.  Change the font to one that is supported on this machine
    2.  Add the default font to this machine

    Considering the hundreds of thousands of Windows apps available, I doubt you're going to find such a list.
    Is there a comprehensive list posted somewhere that show which PC software has compatibity issues?
    Well since Windows software does not run on Mac OS, every application is going to have compatibility issues.
    You'll either have to buy the Mac version (if available) of the software you want to use, or install Windows on the Mac.

  • Compatible Digital Photo Frame?

    I'm trying to find a digital photo frame which is reliably compatible with Mac files (i.e. iPhoto), for both photos and video. I didn't think it would be such a big deal but now that I've started researching it, I'm finding all sorts of complaints about incompatibility, especially with, for example, .mov files.
    The product I'm seeking is intended to be a gift for my elderly grandmother (90 years old) so it has to be simple to use (in other words, I'm not going to get her an iPod touch-- just a simple frame, on which I can pre-load photos and videos, would be ideal.)
    Any ideas?
    Thank you so much in advance, and forgive me if this question should be posted elsewhere.

    Old Toad (love the name!)-- Thank you for the response, and the tip on converting the video files. I think I will try that out, and maybe take a card or thumb drive into Best Buy or Fry's and see if I can test it.
    Can anyone confirm success with putting short videos (created on an Apple device, such as an iPhone) on a digital photo frame? I spent hours Googling yesterday and could find no actual testimonials of such...
    Seems like a pretty basic thing that people would like to be able to do these days, with all the file/video sharing. I know most people just physically hand over a phone or other device and say, "here, look," but I'm sure I'm not the only one with elderly grandparents who never got much beyond using an electric typewriter, and when you can't be physically there to show them something on your own device or computer, there needs to be a simpler solution. I'm looking at frames because those seem to be the least intimidating for an elderly person, as they don't "feel" as much like space-age electronics.
    If anyone has any other options other than a digital frame (I was even considering a small, portable DVD player that would play photos & vids burned to a disc, but that's getting sort of ridiculous), I'm open to suggestions.
    Thanks so much.

  • Transfer digital photos from Olympus Stylus Tough to mac mini desktop - viewing

    How to view digital photos transferred from Olympus Stylus Tough to Mac Mini after duplicated to desktop?  Unable to locate.

    Olympus website FAQ:  I am aMac user. What software can I use to view my images and movies on my computer?
    The [ib] software bundled with this camera is not compatible with Macintosh operating systems. Mac users who wish to transfer their images and movies to a Mac for viewing, editing and sharing have two options:
    Connect the camera to the computer using the camera's bundled USB cable, and then manually transfer your files to the computer using standard copy/paste or drag and drop techniques. Once the files are on your computer, you can use any third-party application of your choice to view, edit and share them.After transferring data there is no efficient way to copy to a file.  The folder provides a "duplicate" option and then it "copies" items to "desktop" by default.
    ===============
    After I transfer the data the unnamed folder gives me the option to "duplicate".  When I do this the data, by default, "copies" to the desktop.
    I am unable to retrieve and locate the actual digital photos and videos, however.  I have tried transferring data before and was able to locate it in the folder,
    but this time I am not locating it.
    My O.S. would not allow me to install the Olympus software needed.

  • Digital Photo Frame with iPhoto

    What are the best digital photo frames that are compatible with Mac and iPhoto?  

    Here's one I had been looking at:
    NIX X08D 8 inch Hi-Res Digital Photo Frame with Motion Sensor
    by NIX
    Sold by NIX Digital and Fulfilled by Amazon. Gift-wrap available.
    High Quality IPS LED Backlit 800 x 600 pixels Hi Resolution Panel with LED Backlighting (4:3 ratio).
    Photo, Video (plays MP4 and AVI only), MP3 Music, Auto Rotate Sensor and Split Screen Image Option
    Full 1yr Warranty, Remote Control, Accepts SD/SDHC Cards, USB Stick / Thumb Drive. Windows PC Compatible only
    If it uses a thumb drive, why would compatibility matter?

  • Is there a work-around to enable Digital Photo Pro on the Microsoft Surface Pro ????

    Is there a way to use Digital Photo Pro on the Microsoft Surface Pro?
    As I understand the problem  DPP is unable detect the screen resolution of the tablet ( the defauilt res of the tablet
    is 1920 x1080) with a minimum of 1024 x768.
    It would be usful if one could type in your working screen res into at startup if that's the only problem
    ___I've looked at other screen drivers from Intell but I realize if I could install thrm I'de lose the touch functionallity
    Are there any other ideas out there???
    Thanks  artB

    Canon DPP is Canon provided application for desktop/laptop computers and they don't have a version for any tablets as far as I'm aware (not even iOS or Android versions).
    But there are other photo editing programs that would work.  I have an iPad.  While Apple has their own photo software (which isn't going to work on a Windows tablet) Adobe has an app called PS Touch.  
    PS Touch isn't nearly as full featured as Photoshop.  It limits the image resolution (it resizes any images that you import to it so they don't exceed the max resolution) but it does have most of the commonly used adjustments.  So if a person were just trying to get something out, it works in a pinch.
    One other catch is that PS Touch can't deal with RAW images... so it's JPEG only.  But I can import JPEGs off the card into the iPad and then edit them -- not as well as I can if they're on a regular computer, but this is what I'ved when I'm away for a weekend with my camera.
    Tim Campbell
    5D II, 5D III, 60Da

  • When accessing Sams Club web site using Firefox and go to Photos, then Pricing, it brings up Digital Photo Center, but when I click items nothing comes up. I turned on my IE and the information was there. What's wrong with Firefox.

    When you go to the link above go to Pricing Under Information - last item). That takes you to Sam's Digital Photo Center page. On the left side click on any of the items listed and I get nothing. This information shows on IE

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • Is there a phone number to call Adobe.  I go around an endless loop pressing their contact info tabs?  Maybe someone at this sight can help. I am new to digital photo - I have been a B&W film photographer for many years. I have a problem with a Macbook Ai

    Is there a phone number to call Adobe.  I go around an endless loop pressing their contact info tabs?  Maybe someone at this sight can help. I am new to digital photo - I have been a B&W film photographer for many years. I have a problem with a Macbook Air.  It was working fine - I was using LR and a message came on the screen that said something like the memory was dangerously low.  I stopped and tried to delete LR files.  I couldn't do it.  I closed the program and tried reopening and got the message that there is not enough memory available to open LR.  I contacted Apple.  They spent a half hour on the phone with me and eventually told me they didn't know how to help. The tech said that LR had gobbled up all the memory and said I should contact Adobe and ask where and how my photo files are stored and to delete them.  I have several back-ups.  Thanks - Arthur

    This sort of error message only comes up for Lightroom when your hard disk is full. Indeed this has nothing to do with internal memory as that will be intelligently be dealt with. If you have a mac Book Air that is not so surprising as the cheapest versions come with very small hard disks and if you shoot raw with any recent camera, you'll fill up your hard disk very quickly and you can probably only store a few months of pictures if you are a typical photographer. So the bottom line is that you need to create some room on your hard disk. You should move some of your originals to an external hard disk. You can also delete some of your backup copies of your catalog file that Lightroom automatically generates every few days and that quickly gobble up hard disk space. So first figure out how full your hard disk is. To see that, go to the apple menu, hit -> About this Mac -> More info->Storage. You should see your internal hard disk on top and you'll find that it is almost entirely full with photos. Now find your Lightroom catalog file using Finder. It is usually in a folder in the Pictures folder in your home directory. You should see a Lightroom 5 Catalog.lrcat file, a previews file and a folder called backups. Inside the backups folder, you'll find a lot of subfolders. They have names that show the dates the backups were created. If you have backups of your entire hard disk, you can delete these backups when they are older than a few months. I usually only keep the last 4 around. Just drag the folders into the trash can on the dock on the bottom of your screen and empty the trash. This will probably free up enough space that Lightroom will already run again. Now start thinking about where you will want to store older images. If you have a good USB3 or Thunderbolt hard disk that is probably the best option. There is a video here by Adobe that has some instructions on how to do this: Is Your Hard Drive Full? Here’s How to Move Images to Another Drive in Lightroom. « Julieanne Kost's Blog If that doesn't work because you don't have enough hard drive space to run Lightroom yet, here is another set of instructions to move your files using the finder to the other hard disk: How do I move only my photos to another hard drive, leaving the catalog where it is? - The Lightroom Queen. If you follow that, as soon as you confirm all your images are on the new hard disk, you can delete them from your internal one. She is not so clear about that part but if you don't delete the originals that you moved off you don't free up space. You should move the folder structure over to the new hard disk and then reconnect the folders in Lightroom. That should make it refind all your images.
    That said, if you are uncomfortable with the computer in itself, your best bet is to find a local photography club. There is invariably a Lightroom savvy person in there that could help you move your files. That might be your best bet if you are uncomfortable moving these yourself. A general mac savvy person like you would find at an Apple store or so generally will not be able to help you with this except when they are photographers themselves and know Lightroom. You might get lucky with that.

  • Digital Photo Frame df1010v2 - how to download photos in the order they appear on USB?

    Photos installed nicely into my df1010v2 digital photo frame, but not in the order I wanted them. I had painstakingly named all of them by date, and they appeared chronologically on the USB drive I copied them from, but they downloaded in random bunches.<br><br>Does anyone know why this happened and whether there is a fix? Pictures are for my 90-year-old mother, and the weird order will confuse her. I do not have frame set to view in random sequence, but that's how they will appear to her<br><br>P.S. Many of the photos are scans of old photos, so setting them to appear by date taken will not work here.<br><br>Thank you for any help!

    Hi,
    If you are happy with PSE 6, why not continue to use it?
    PSE 13 can display the images in date/time order like PSE 6 does. The time doesn't appear when you hover over a thumbnail but can be displayed below the thumbnail. The best thing is for you to download the trial version (select version 13 from the following link) and try it for 30 days to see if you like it.
    Download Photoshop Elements products | 13, 12, 11, 10
    If you use the trial, to see the date and time under each thumbnail you need to go to the View menu in the organizer and ensure that Details is checked.
    Brian

  • How do I install a plug-in module into photoshop CS5 for a Sony Digital Photo PrinterUP-CR10L?

    I am trying to install a borders module for the Sony Digital Photo Printer UP-CR10L into photoshop CS5. I have copied the plug-in into the program file for Adobe plug-ins but it is not coming up in photoshop. What am I doing wrong?
    Thanks for your help.
    Sherri

    Hello imagesbysherri,
    Our Sony Professional Product team would be better equipped to assist you with this. You can find them on Facebook at www.facebook.com/SonyProUSA. I hope this helps.
    Best regards,
    Farley

  • Is there a way to make digital photos look less like video in FCP?

    I know this is probably a question better suited to the Adobe Photoshop forums, but does anyone know a way to make digital photos look more like film than video in FCP? I know about watching for hotspots and such, but is there anything else I can do?
    Thanks in advance,
    Lloyd Lathrop

    All links in the chain peddle the bicycle: in this case, I would guess your photography may suffer a bit if your colors are blown out. In assuming you have a chance to rephotograph, establish in your menu that your color temperature matches your lighting. Try K6300 for strobe, K6100 for strobe umbrella, K3100 up or down a few for tungsten: make sure your lights are at 45 degree from your photos, reflection of the camera. Your best bet is to WBalance them, and at all the same exposure, as Automatic tends to give you the neutral color and neutral value. Don't trust automatic unless you're in a pinch. You can also set in your menu a "less vivid" level, but I wouldn't trust this either.
    Good luck.

  • How to measure the number of pixels involved in a selected area of a digital photo?

    Hi everyone. I want to determine the number of pixels in an object that is part of a digital photo. I use cameras to film chunks of ice breaking away from ice cliffs or tidewater glaciers. I want to know the size of the ice chunk that my digital photographs capture. I know the width and height of the ice cliff in metres already, so I was thinking that I could convert the equivalent of 1 pixel : ? metres - this is really what I want to do. That way every time I see a chunk of ice breaking off, I can pull up the photo, outline the chunk, calculate how many pixels fill the area of ice removed by the chunk breaking off and convert to metres area 2 - thus giving me my size order. If anyone has ideas on how to do this I would really appreciate it, thanks so much community. I was thinking that Photoshop or Fireworks could help me with this, Ricky

    Hi SIlkrooster,
    Thanks for responding and giving a suggestion,
    I followed your approach (see attached screen shot) , Image, Image Size, and found that approximately 37 pixels = 1 centimetre. So just to be clear - if I measure a straight line with the ruler tool that is say 10cm long, I can simply do: 10 cm * 37 pixels (1cm equivalent) = 370 pixels for the straight line. Do you agree?
    Do you agree?

  • Canon digital photo professional 3.7 does not launch in Lion

    Can the community confirm there is a compatability issue with Canons Digital Photo Professional version 3.7. Canon only show support for OS X 10.6
    Thanks.

    EOS Utility Updater for Mac OS X
    Version 2.9.0
    Released on 07-10-2010
    Description:
    EOS Utility is an application that brings together all of the functions required to communicate with the camera. Functions for downloading and displaying images, remote shooting, and camera control of each setting when an EOS DIGITAL camera is connected to a computer have been integrated.
    It is linked with DIGITAL Photo Professional, ImageBrowser, Picture Style Editor, but the software has to be the latest version.
    Please download the latest version of the software from here.
    Digital Photo Professional (3.9.1 or later)
    ZoomBrowser EX (6.6 or later)
    ImageBrowser (6.6 or later)
    Picture Style Editor (1.8 or later)
    Changes with EOS Utility 2.9.0
    Added Camera support
    Supports EOS 60D
    Added rating display function.
    New Automatically display Quick Preview window check box added to the [Basic Settings] in [Preferences].
    Controlling the appearance of the quick preview window after downloading images or shooting remotely.
    RAW images can now be used with the overlaid display function.
    Peripheral illumination correction data for the EF 70-300mm f/4-5.6L IS USM has been added.
    Lens peripheral illumination correction data available for Extender EF 1.4× III or the Extender EF 2× III.
    An issue with certain timer values not being able to be set for interval timer shooting has been fixed.
    Technical support is no longer available for the following models when used with this version of EOS Utility:
    EOS D30, EOS D60, EOS 10D, EOS 20D, EOS 20Da, EOS 5D, EOS 300D DIGITAL, EOS 350D DIGITAL, EOS-1D, EOS-1D Mark II, EOS-1D Mark II N, EOS-1Ds, EOS-1Ds Mark II (it is recommended to use EOS Utility 2.7 with these models)
    Compatibility:
    Operating system(s): Mac OS X 10.4.x, Mac OS X 10.5.x, Mac OS X 10.6.x
    Language(s): English, French, German, Italian, Russian, Spanish

  • Lightroom 5.5 and Digital Photo Professional 4

    My workflow includes processing my Canon 6D RAW files in LR exporting them in reduced size JPG format to a folder on my external drive and then opening up the images in Digital Photo Professional (versions 3 and 4) to review and tweak before submission.
    I updated to LR5.5 and DPP4 simultaneously (stupid). Now when I follow the above work flow, the JPG files created in LR5.5 can not be read in DPP4 (or DPP3). I have called Canon, they are not aware of the issue and had no really good feedback. DPP4 can read all other previous LR JPGs created prior to the update to LR5.5.
    I have uninstalled DPP3 and 4 and reinstalled DPP 4 with same results.
    Anybody on the Lightroom end know of any possible explanation?
    Thanks,
    Don

    The short answer is that Adobe changes something in LR and PS-ACR that puts the JPG header sections in a different order, and while this may be within the JPG standard, some programs including DPP don’t know how to handle this change, and won’t open the LR 5.5 JPGs.
    The release notes for ACR 8.6 RC say Adobe has changed things to make JPGs readable by more applications.  Presumably this will reverse whatever was changed, but there is no LR 5.6 RC so you’ll have to wait for LR 5.6 final, or put LR 5.4 back if you don’t have a camera that needs LR 5.5+.
    Older versions of LR are available at the Adobe Updates page:
    http://www.adobe.com/downloads/updates

Maybe you are looking for

  • How should I debug a PVM that is crashing & rebooting too fast ?

    I have a newly created oel4u6 PVM that appears to be starting but then crashing & rebooting too fast and I don't know how to best debug it. The vm is a P2V'ed oel4u6 HP Blade that successfully boots as a HVM but I can't seem to get it to fully start

  • What is saved in an iCloud contacts backup?

    I was extremely misled, by an Apple Store Genius last night, into doing a full reset to factory settings on my iPhone4s, just due to it starting to get hot.. They didn't even know why it would not reactivate, after reloading the iOS and I had to find

  • Lenovo Ideapad B590 Ethernet unknown device

    Hello! I could use a little help with my new laptop - I installed Windows 7 (64) and all the drivers I could find on the drivers page, and still, it can't use my wired network. In device manager, its an unknown device (ethernet controller). Any tips

  • How to check System Center Service manager 2012 R2 license version

    Hi, I have installed Microsoft System Center 2012 R2 Service manager 3months before but do not have remember whether I put permanent license key or evaluation, can anyone please let me know how can I check whether this is evaluation or permanent lice

  • Streaming instead of downloading

    i love Safari on windows, but I am trying to get Safari to streaming video links i click on instead of downloading, Is there a setting that will let me do that?