GIGAWORKS AND ASUS REALTEK SOUND CARD will they work together or what sound cards are compatable?

S750 GIGAWORKS AND ASUS MOTHERERBOARD REALTEK SOUND CARD
My system currently used a built in sound card on the main board asus hd audio
I am wondering if these speakers will work fully with the built in sound card or will I need to purchase another sound blaster card?

Is your built in Realtek 7.1 analog? If so, does it have 3 output jacks for 7.1 or 4.1 If 4, you'll need a cable with 4 1/8th inch plugs on each end, if it's got 3 the included cable will work fine. Either way it shouldn't be a problem, although some onboard sound may not sound as good as a dedicated higher-quality soundcard as high quality speakers tend to bring out both the best and worst in your other sound equipment.
Dale

Similar Messages

  • S750 GIGAWORKS AND ASUS MOTHERERBOARD REALTEK SOUND CARD will they work together

    S750 GIGAWORKS AND ASUS MOTHERERBOARD REALTEK SOUND CARD
    My system currently used a built in sound card on the main board asus hd audio
    I am wondering if these speakers will work fully with the built in sound card or will I need to purchase another sound blaster card?
    the mobo is a but I have noticed the jack plugs on the s750 have

    should work fine mate, i have asus p5n-e sli board, and i have the realtek hd audio onboard, one thing i can tell you though, CREATIVE audigy 2 and x-fi cards have a serious problem with nforce 4 and 650i chipsets, not sure about 680i but i wouldnt risk my money, they just dont seem to draw enough power from the pci bus if you have a decent graphic card installed, you end up with very loud crackling and pops which sound scary as if its gonna blow your pc up, theres a lot of complaints on the net about this and i had to pull my audigy 2 zs out my machine and go back to onboard realtek because of this problem, blame driver support, creative just cant get their act together

  • IMovie and Canon FS100 Camcorder - will they work together?

    Hi! A MacUser since 1989, and using a digital camera for stills and videos since 2004 - +but really have done next to nothing with a true "camcorder".+
    I'm considering a Canon FS100 camcorder which records onto SD and SDHC cards (but has no internal memory / storage).
    *But my concerns are this:*
    1. How to transfer from the SD cards to my Mac? (currently 10.4.11 but likely 10.5 in a month or so)
    2. If I purchase the camcorder in the USA it is apparently set for NTSC - i.e. I can only play back from the camera to an NTSC television - but I travel in the US, live in Europe (PAL) -- is there no "switch" to choose either the recording or the playback mode (like there is with my iPod Touch- for playback that is).
    3. What about "still photos" that I take with the FS100? Are they .jpg files? Can iPhoto handle them?
    4. Indeed what about iPhoto: Can it import all the videos and photos from an FS100??
    Again, this is all real "new new" to me; and I don't want to buy/carry 2 camcorders (an NTSC and a PAL!!!) --
    Any help or reference guides etc really appreciated. The big trip is not tomorrow, so I've got some time here.
    Thanks! Steve Schulte
    Saturday 2 August 2008 at 17:37

    Hi there Stephen,
    I feel so lucky that I stumbled into a great file management scheme with my Canon HF100 and I can also report that before that I tried an FS100 and the same procedure for a week before I got this camera. I picked up this method on a thread on MacRumours, I believe.
    Without the inconvenience of needing the AC power adapter plugged in to download files direct from the camera, simply use a USB card reader to read directly from the card. The card will mount as a device labeled "Canon" and inside that is a single directory labeled "Private". Inside that is the one you want, labeled "AVCHD". Create a disc image just a little larger than this file and drag the "AVCHD" file over to the disk image. Name the disk image to suit, such as place/date. Both iMovie 08 and FCE recognize the mounted image as a camera and import the footage just fine. Not quite PNP, but this procedure is so smooth that I'm almost surprised that this video n00b could get it going so well If you are in a hurry you can just drag the file to a folder named similar to what you will name the disk image to keep them sorted and do the disk images later on.
    I use 8 gig SDHC cards so that I can archive each full card's AVCHD file's disk image on a dual layer DVD. I leave the images on a hard drive as well, but won't be shy about deleting less precious ones and using the DVD's only for storage. The images will mount directly from the DVD and import easily too.
    This weekend I upgraded from 10.4.10 to 10.5.4, installed FCE, and was able to mount a disc image and import the files as easily as before.
    But of course, you need an Intel Mac do work with the AVCHD files....
    Hope this helps!
    Cheers!
    Glen

  • (updated)UIScrollBar and my own class. Can they works together?

    Hi Eone,
    i'm implementing a uiscrollbar in a class of mine that extends textfield. Unluckly it gives to me  a lot of 1120 error, undefined property, in each row i use a property of this component (except the constructor).
    I read somewhere that As2 not allow to use uisbar in other type of class that extends movieclip or textfiled or you know what...
    It's the same in As3?
    EDIT:
    I found a solution. Some method an properties of UISB can be used in the cvlass (like, contructor, update, target). Some otherelse not. So the other can be used only when i do an instance of my own class, like properties of the instance. Ex:
    textfield.UISB.x = 100;
    textfield: instance of my class
    UISB: scrollbar declared within my class
    x= properties defined only instancing my class

    You need to read the basics about Swing events.
    For starters, you do not implement listeners in your Applet class. Instead, you add new listeners to specific components that you want to listen on. For example, if you need to perform certain actions when a JComboBox's selection changes, you would do something like:
    my_combo.addActionListener(  new ActionListener() {
        public void actionPerformed(ActionEvent e) {
            System.out.println("selection changed to: " + my_combo.getSelectedItem());
    });And for buttons:
    my_button.addActionListener( new ActionListener() {
        public void actionPerformed(ActionEvent e) {
            System.out.println("You clicked " + ((JButton) e.getSource()).getText() " button);
    }MoustListener and other listeners can be similarily added. See JDK Documentation or Tutorials

  • IMac to Macbook Pro as extended desktop. Will they work together?

    Can I use my iMac as an extended desktop with my MacBook Pro? Or vise versa? iMac is late 2009 and MacBook is late 2013. The iMac has a mini display port and the MacBook has a thunderbolt port. Can I make the connection with a thunderbolt cable?

    Here is the criteria:
    https://support.apple.com/en-us/HT3924
    I think it looks good for you.
    Ciao.

  • HT1533 my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in

    my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?

    OS X Mountain Lion: If you can’t hear sound from your speakers
    Read the "If you’re trying to listen through external speakers" section.

  • HT201302 I am trying to clear space on our iPad. If I delete photos and videos on the iPad, will they remain saved on our iCloud account?  Need the space, don't want to lose the photos!

    I am trying to clear space on our iPad. If I delete photos and videos on the iPad, will they remain saved on our iCloud account?  Need the space, don't want to lose the photos!

    They will be backed up only until you backup again. iCloud is not a storage drive in the sky, it is a backup service only. If you delete the photos and videos from the camera roll, and then you backup the iPad with iCloud, you will overwrite that backup and the photos will be gone.
    Import the photos to your computer if they are that important to you. iCloud is for backup only, not a storage place that you can download your photos from again once you overwrite that backup.
    iOS: Importing personal photos and videos from iOS devices to your ...

  • I recently got a mac book pro and uploaded my pictures and videos from my iphone 4 to the mac book. If I delete these pictures and videos from my phone will they automatically delete from the mac book?

    I recently got a mac book pro and uploaded my pictures and videos from my iphone 4 to the mac book. If I delete these pictures and videos from my phone will they automatically delete from the mac book?

    No.  The data that you downloaded from your iPhone will remain on your MBP.
    Ciao.

  • Hi, i want to buy iphone 5s silver and iphone 5s gold both with T-mobile nano card. Is Iphone 5s unlocked? if i will bel for example in Ukraine and will use the ukrainian nano card will it work there?

    hi, i want to buy iphone 5s silver and iphone 5s gold both with T-mobile nano card. Is Iphone 5s unlocked? if i will bel for example in Ukraine and will use the ukrainian nano card will it work there?

    Apple does not unlock iPhones. however, T-Mobile, where you live does offer official unlocking. So, contact them as to the cost/requirements.

  • I upgraded to mountain lion. Now my virgin mobile broadband internet card will not work

    I uninstalled the broadband software and then tried to reistall it but it will not work. I pluged in my usb card but it doesn't show that it is pluged in. I tried the card on my girlfriends computer and it works. I pluged a camera in my usb port and that works. Can anyone help me out.
    Thanks

    My internet card will only work on 32bit,and it sounds like mountain lion only works on 64bit so that must be my problem. I think I will have to upgrade my internet or go back to lion.

  • I updated to java 7 and now my yahoo games will not work, how do i fix this?

    i updated to java 7 and now my yahoo games will not work, how do I fix this?

    kathieaross,
    click on the Java pane in System Preferences. When the Java Control Panel window opens, click on the Security tab, and set your Security Level to Medium — that will allow “untrusted” applications (i.e. those without certificates from a trusted authority) to run. Press the Apply button in the lower-right corner to confirm the change, then press the OK button to close the window.
    Apparently your Yahoo! card games don’t have certificates associated with them, which is why the default security setting of Java SE 7 Update 51 didn’t allow them to run.

  • That America unenhanced and sim unlocked iPhone 5 will it work in Turkey?

    That America unenhanced and sim unlocked iPhone 5 will it work in Turkey?

    If you purchased an officially and fully unlocked iPhone 5 from an Apple store in the US, then yes, it will work in Turkey.
    If you did not buy your phone from an Apple store, then it will be sim free rather than unlocked, which is different, so it probably will not work.
    Also, you need to remember, that yes your phone will work with local sim cards if it is unlocked, but you won't be able to get any 4G or LTE cover because the frequencies differ from the US to what is available in Turkey, so you will have an iPhone 5 with 4G capability that you can't use - only on 3G.
    You also need to consider the warranty issue.  The warranty for the iPhone 5 is only valid for the US if you buy it in the US, so if anything goes wrong with your phone, then you'll have to go back to the US.  No shop in Turkey will help you with it because of the US warranty.
    If you want an iPhone 5 then buy an unlocked phone from an Apple store in Europe and then you will get an EU wide warranty and you will be covered and chances are that you will get 4G and LTE compatibility too as it is Europe.
    Apple stores in Paris and the UK sell unlocked iPhones.  Not sure about others.

  • FCP 7 and Motion 5, do you know if they work together?

    If one wants to keep editing in FCP 7 but also wants to use Motion 5, do you know if they work together and can send things easily back and forth between the two like FCP 7 and Motion 4?
    Also, does Motion 5 over write Motion 4? Thanks

    On my system, all the old apps were indeed transferred to the new 'applications/Final Cut Studio' folder (including Color, Sountrack Pro, DVD Studio Pro and so on). It didn't say that so I missed it at first.
    You may want to make backup copies on your mac before installing the new apps just to be on the safe side, though.
    After installing the new versions, you can still use Motion 4, Compressor 3.5 and FCP 7 out of the backup folder.
    Compressor 4 will work with mov files (both self contained and referenced) created from FCP 7. I haven't tried to send a timeline from FCP 7 to Compressor 4 yet but since so little has been changed in Compressor 4 I guess that will also work.
    Anyway, you could always go back to Compressor 3.5 if needed.

  • Cableone innstalled a new server and now my thunderbird email will not work. What do I do now?

    Cableone, our internet provider, has changed from a Google server to their own server and now my Thunderbird email will not work. They have directions listed to make it work, but this does not work. I have also contacted Cableone's technical support and they say because thunderbird is not their system they have no responsibility to make it work. I prefer to use Thunderbird for my email - how can I make it work? Also, I have tried the Thunderbird 'Automatic Account Configuration' help and it does not work.

    Ask your less than helpful provider for the server settings and setup the new account up manually.
    You want to know IMAP or POP and the name of the server. The port number and if it uses SSL/TLS security.
    You need the same info for the SMTP server for outbound mail.

  • If i buy an unlocked iphone4s in america and get it shipped over will it work in ireland? Im meteor btw.

    If i buy an unlocked iphone4s in america and get it shipped over will it work in ireland? Im meteor btw.

    Keep in mind that you're going to have to have somone order it for you and have it shipped to themselves, then ship it to you. The unlocked 4S can't currently be purchased at retail in the US and apple.com will only accept a US credit card with a US billing/shipping address.
    Meteor is listed as a supported carrier, so you shouldn't have any problems on that point.

Maybe you are looking for

  • Query via linked server to DB2/NT gives different results

    I have a DB2 9.7 database I need to query. I'm testing from four separate SQL Servers. ServerA - SQL 2012 SP2 ServerB - SQL 2012 SP1 ServerC - SQL 2012 SP1 CU1 ServerD - SQL 2012 SP1 I set up a linked server from ServerA. I run QueryA, and am happy w

  • Intrastat vendor return within EU

    Folks, I have a vendor return from NL to DE. The item is marked as return item. When running ENGR and do periodic declarations, I don;t see the specific PO anywhere coming back to be reported. Material is shipped back with a delivery type RL. Any sug

  • How to stop pse from autoscanning every device I plug in

    I have to admit up front I really hate software that decides what it is going to do without asking. I recently bought a scanner with an older pse version 3. After I installed it I find that everytime I insert any usb device or sd card pse pops up and

  • What to do next?  about application

    hi, I have a question about what to do next. This should be an easy question for most of you out there but I am just a beginner. I made a java application recently and it contains many classes. My problem is, what should i do to put all classes i mad

  • How can I use fonts in my universal type client?

    Fonts in my universal type client do not show up in any adobe CC applications. I have recently purchased a new MAC with OSX. First the type client ( Universal Type Client version 4.1)  was installed and then I activated adobe CC. Any advice would be