Gigaworks S750 (7.1) problems

ok so i got this speaker system just a few days ago, and my side right speaker is acting as my side left speaker, now this wouldnt be a problem is my side left was acting as side right, but thats not the case, so both side speakers are both acting as my side left speakers, i have tried switches cables around with other speakers only to result in the same thing, so any idea on how to fix this?
thank you

Hi all,
I bought a Megaworks 550. It worked for yr n 3mnths. Then I bought a Gigaworks750. At the 22nd day I heard a Ttasshh sound from inside the Sub. And the system wont power up! The green LED behind just keeps blinking. I am in Bangladesh, the reseller won't take responsibilty of the warranty. They asked me to contact creative asia (singapore). Now, If I need to send it to singapore for a replacement, that'll cost me more than the price of the system. What an irony!!!
Does the Ttasshh sound mean only a part(condenser/register) of the power supply board is gone. Anybody! Any Advice!
BR

Similar Messages

Gigawork S750 power on problem

Hello,
I have been experiencing problem when I power on the speakers. When I press the power button (on both controller or the box), the speakers may switch on then off and back on in a second of time. It seems like it was resetting itself and I need to set the volume again. It happens absolutely randomly...
What is wrong with my speakers?
Thanks,
Harry

I had the same problem out of the box and there are other posts with this problem. If the power light on the subwoofer stays on then your audio pod is faulty. Contract Creative customer support (make sure you fill in your adress, contact details etc. as this speeds up the process) and tell them what the problem is. They should respond telling you to send the pod back and they'll send a replacement. Mine came within about 4 days. Now it works fine.

Gigaworks S750 Rear Speaker Problem

I am having problems with the rear left speak channel. I have swapped the speaker with another one and so I know its not the actual speaker, more likely the chanel or the setup. I have cheked all wire and they are fine. Any ideas?

I've found that all the connections are very fiddly - both into the sub and into the actual speakers. It might sound silly but disconnect and then reconnect everything. It seems to bring out a different sound quality everytime i do this. I've had problems with the side rears before now, but this method cured it.

Problema cassa posteriore sinistra gigaworks s750

Salve, Possiedo delle creative gigaworks 7.1 s750 nuove da 4 mesi e una scheda creative x-fi extreme music nuova. Ieri l'altoparlante sinistro posteriore a smesso di funzionare. Ho fatto delle prove: ho collegato la cassa sinistra posteriore sul canale destro anteriore e la cassa funziona. Ho provato ha reinstallare la scheda sonora e riccolegato?l'altoparlante e il problema non lo risolto. Ho fatto l'ultima prova collegando le gigaworks s750 al decoder DDTS-100 con cavo ottico?alla console e il canale posteriore sinistro non funziona.Ora ho pensato che il guasto e dal subwoffer. Volevo sapere come mai questo problema?

ti consiglio di portarlo alla creative per un controllo, avevo anch'io dei problemi con il sub dei T7900 e alla fine ho perso piu tempo a fare prove che portarlo a loro. Lo porto oggi e mi levo il pensiero. buona fortuna

Problem with gigawork s750 speakers

I was wondering if someone could help me? I have the gigawork s750 and x-fi elite pro. When I play music only the center,side,rear left and right speakers play all the songs. When I do the check they all work, but I still have no idea how to make them all work at once? anyone help me would be greatly apreciated
thanks,
tuggy

Can you confirm that the individual speakers are all working correctly by swapping them around to see if the fault follows the speakers or remains on the channel where they were. If the speakers are ok, then there maybe a fault with the sub woofer or sound card. You could check this by using different speaker system to verify the sound card or connect the speaker system to another sound card, but both are time consuming tests.

How to use GigaWorks S750 to my laptop??? HELP!!

Hi
I'm having trouble with finding the right and best solution to connect my GigaWorks S750 to my laptop.
I havent got enough outputs on my laptop (my system needs 7.1).
I need a solution so i can use all 8 speakers. Maybe a external soundcard or something like that?
Please be kind and help me if you know a good solution. Thanks!
Danni

Belindasue01, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Connecting DVD-Player with GigaWorks S750

I'm going to buy a GigaWorks S750 system. Will I need an extra decoder like the DDTS-100 when I want to connect the soundsystem with the Computer (with Audigy 2 ZS Platinum Pro) and one of these things: DVD-Player, Radio, Walkman?
Thank's for your answers!

No, I wouldn't bother. You can connect both radio and walkman to two of the line-in sockets on the Audigy's external hub. A DVD player can be connected using the coax or optical inputs. One thing you can't do with the Audigy 2 is use Dolby Pro Logic II for PS2 games. If you don't have a PS2 to connect then, that's not really a problem.

Is this a genuine gigaworks s750 system?

A little over a month ago I purchased a GigaWorks S750 system from Dell, which arrived in a regular brown box with Creative's logo, pictures of the S750 and black writing on it. It looks fine. Recently however, I observed that all the pictures I ever saw of the S750 always showed the shipping package as a multi-colored box. Plus, some of the wording on the box I received are a bit different from what are on the multi-colored box.
Just out of curiosity, I e-mailed Creative about this and they replied stating that all S750 systems are indeed shipped in Creative's multi-colored box (orange/white with blue writing on it). They advised that I should contact Dell about this since Dell might have shipped me a refurbished S750 system.
I contacted Dell by telephone about what Creative had said and they told me that first of all, they do not refurbish third party products and second, although I ordered the product from Dell, the S750 was actually shipped from Creative's warehouse. (Product was actually shipped from a company named Tech Data Corp., Technology Drive, Swedesboro, NJ 08085. Country of origin: China. Manufactured date: 0/28/05).
Please note that I have not even hooked up the system yet. In view of the innumerable amount of problems people are having with the S750, I think I should first get some explanation about this discrepancy.
Am I the only one this has happened to I need to know whether this is a genuine GigaWorks S750 system or is it a fake, a refurbished set or whatever. I really need to know just to put my mind at ease.
JC

JC,
I have seen S700 and S750's shipped in brown boxes so I would not worry. It may be that since these were for a third party a brown box was decided on as the packaging. I am not aware of any "fake" S750's so I think you are safe.
Jeremy

Loss of sound with the Gigaworks S750 system

Hi,
I just recently purchased a Gigaworks S750 speaker system and I ran into a problem. Every-so-often, randomly, my entire system will just stop playing any sound. This last for a random amount of time (5 second to 30 mins). I've triple checked the wires and even taken the system down and re-set it up. I know it'ss not the sound card (recently purchased Audigy 2 ZS) and it'ss not the drivers (updated them many times). I know it'ss a problem with the speaker system itself as I split the signal from my soundcard out to both my headphones and my speakers and my headphones continue to work during the outages. When I plug my headphones into the jack on the control unit of the S750 during an outage, the sound plays through them. Any help you can give me will be greatly appreciated!
Thanks,
Riley
Message Edited by RileyKash on 02-02-2005 02:28 AM
Message Edited by RileyKash on 02-02-2005 02:28 AM

It turns out that I was wrong about one thing, once the USB port on the right side of my computer stops working for the US-122, it seems to shut down until I restart the computer. I thought that it worked after the US-122 went down and was unplugged because another device will receive power from the port when plugged in. It turns out that although the new device will power up, it won't be recognized by the computer. I appreciate any help or ideas. Thanks.
---Will.

How to connect Gigaworks S750 with AUDIGY 2 ZS

Hello,
I'm a french user so please apologize for my bad english ;-)
Well, let's talk about the problem.
I've bought a GIGAWORKS S750 (occasion) and AUDIGY 2ZS. I tried to connect them but i'm having problem. Let me explain :
The cable used to connect the GIGAWORKS to the Audigy 2zs have 4 plugs on each side. On the subwoofer i connect the pink/green/black/grey and then on my audigy 2 zs i have to connect 3 plugs (black, grey & pink). But there one more (the grey) which is "alone" and i'm not able to connect it on my audigy 2zs. Moreover, I don't have sound "side" when i used the THX Setup Console, and when i make a test the Rear speakers correspond to the Side speakers...
So my question is : is there something wrong with the cable i used to connect the gigaworks to my audigy 2zs ? (as i'm able to connect 3 plug on my audigy, why is there 4 plug ?!).
The guy who sold me gigaworks have maybe forget the good cable ?!
I can post a pict of this cable if needed !
Any help would be great...;-)
Thanks,
Florian

well, if you buy a new set of gigaworks speakers, there is a special cable in the box to connect the audigy 2zs (3 to 4 pin connector), which I also use, because I have the same setup.
you should contact the person you bought the set from, and ask for that cable.
regards
K

Help connect X-fi Elite Pro with DDTS-100 and Gigaworks s750

Hi,
I purchased a brand new Gigaworks s750 speakers system, DDTS-100 decoder and X-fi Elite Pro. I connected the DDTS-100 and Elite Pro using Optical Fibre output from the audio console of X-fi Elite Pro to the optical digital input of DDTS-100. With the cables supplied with s750, I connected it to the Decoder DDTS-100. The problem is I am not getting any sound from the rear speakers and the front speakers. Only the centre speakers and the side speakers are producing sound. I could hear loud hissing sound and very very low volume of the music from the front speakers and no sound from the rear speakers. I can hear good quality sound from the centre speakers and average quality sound from the side speakers. What could possibly have gone wrong with my setup ? Somebody please help me. Thanx in advance.

Hi Richie,
Thanq for your response. But unlike what you have mentioned, ("what may be happining is the soundcard is decoding the signal and then the ddts is trying to decode it with disatrous results"), In my setup the signal is not getting decoded two times, once by Soundcard and once by the DDTS-100. As I have mentioned that I am taking out an Optical Signal from the sound card to the DDTS-100, the signal comming out from the sound card to the DDTS is Encoded signal only. So there doesnt arise a chance that the signal is getting decoded twice. Can you think of any other reason why my setup is not working? Please let me know.
regards,
Rahul M

GigaWorks S750 7.1 - Interference and Volume issue

Please provide assistance,
I recently purchased a the Gigaworks s750 along with Creative's Sound Blaster Audigy 2 ZS.
Here is the problem I am encountering:
When using it for any type of audio, DVD playback being the worst, I get a great deal of interference when turned up past 50% volume on the Gigaworks controller. And to get any sound, I have to have the volume of the controller connected to the sub at a minimum of 50%. If there is no audio, when turned up the interference is totally unbearable.
I have the audio on my PC turned up to 100%, and this goes for every form of audio controller on my PC. If any one of these audio controllers on my PC are turned down, I get very little audio out of the speakers at all?
Is there anyway to get rid of this noise? I would like to have my DVD movies or games with the ability to play at a reasonable volume and be able to hear the fine noises that make a surround sound system worth purchasing. At this point when turned up, 80-100% of volume on sub volume controller, I get so much interference that the only time I can hear decent quality sound is when the sub and music are loud enough to cancel out the annoying interference?
Please help?
Sincerely,
Poor creative customer

I would recommend the G550W if you don't want to risk the S750, I have an S750 set, had to have the sub replaced a single time, but was no trouble at all and only took like 4 or 5 days for the new one to arri've, sets been running perfect for more than a year now

Gigaworks S750 + Audigy1 - Only hear left channel in left and right speakers

Since last week I'm the proud owner of a gigaworks S750. Since my new computer went RMA I decided to hook it up on my old computer with an Audigy (SB Audigy E400) audio card.
The original Audigy drivers come with this test program that tests all channels saying "front left", "front right" etc etc through the respecti've speakers.
However, when running this test program I hear the "front left" message through both the front speakers, and the "rear left" message through both the side speakers.
The "front right" and "rear right" messages I don't hear.
I've been looking through the settings of the audigy and reading the manual of the Gigaworks set, but nothing turned up.
My old Philips 4.1 speakerset did not have this problem, so my guess is it's something with the gigaworks.
Thanks

U sure the speakers are set to 7.1 ? BTW u need Audigy 2 ZS or Audigy 2 Platinum to make all your speakers make the correct sounds. BUY A NEW SOUNDCARD!!!
Message Edited by DexterLabs on 02-06-2005 01:30 AM

GIGAWORKS S750 7.1 malfunction solved?

Hellow everybody!
I have read a lot about GIGAWORKS S750 7.1 sub malfunction. I would like to buy a sound system, and I think this is a great one but as I said there are a lot of post with the same malfunction.
Is this malfunction solved, or it have the same problem yet?
In spite of buying 7.1, would be better to buy the GIGAWORKS G500 5.1 Does G500 5.1 have the same problem?
THANKS!

I would recommend the G550W if you don't want to risk the S750, I have an S750 set, had to have the sub replaced a single time, but was no trouble at all and only took like 4 or 5 days for the new one to arri've, sets been running perfect for more than a year now

Gigaworks S750 front channels cutting out/clipping

I'm having a problem with my Gigaworks S750. It works perfectly at low volume (~30% or less). Above that, I get horrible clipping, cutouts, and digital chatter out of the front channels. Audio passed out the headphone jack is fine regardless of volume.
I cracked open the sub and looked for burnt electronics and popped capacitors... didn't find any. I did notice that the plastic wrap on 2 of the 3 transformers looked darker than normal.
Any suggestions?

I have exactly the same problem, but I still didn't open the sub, i think everything fine there too...
I li've in Moscow, Russia and I don't know where to get fixed it even for money, anybody help!
I really love this speaker system and i don't want to have anything instead of it....

Gigaworks S750 (7.1) problems

Similar Messages

Maybe you are looking for