Gigaworks S750 front channels cutting out/clipping

I'm having a problem with my Gigaworks S750. It works perfectly at low volume (~30% or less). Above that, I get horrible clipping, cutouts, and digital chatter out of the front channels. Audio passed out the headphone jack is fine regardless of volume.
I cracked open the sub and looked for burnt electronics and popped capacitors... didn't find any. I did notice that the plastic wrap on 2 of the 3 transformers looked darker than normal.
Any suggestions?

I have exactly the same problem, but I still didn't open the sub, i think everything fine there too...
I li've in Moscow, Russia and I don't know where to get fixed it even for money, anybody help!
I really love this speaker system and i don't want to have anything instead of it....

Similar Messages

Left, right, or both sound channels cutting out

Hello folks,
This is a second thread I am creating to ask some questions about this other problem I have:
I have a fourth-gen ipod photo. I bought it just before they rolled out the ipod color. I have used this device pretty heavily, I take it with me everywhere I go. I've tried to take good care of my iPod... no major drops, minimal jars, only unplugging it when there's no I/O access, and trying not to charge it until the battery is low.
For several months I have been having issues with sound channels on my headphones cutting out. At first, it was just annoying: left or right sound channel cutting out, fixed simply by nudging the headphone plug in the jack.
Lately, however, this is becoming a bigger problem. This problem does not affect the ipod playing back music in any way, aside from the fact that sometimes the ipod will think I've unplugged the headphone.
Now, sound will completely cut out. Sometimes I hear nothing. Sometimes fidelity will drop pretty heavily and everything sounds like I was listening to my music underwater. Sometimes, just the left or right sound channels cut out. Again, all of this fixes itself by wiggling the headphone jack in its plug.
I use a pair of $20 walmart special Sony Street Style (very nice sound quality, actually) in most cases, but also use it with a pair of American Audio DJ headphones. The Sony headphones have an L-shaped plug, but the AA headphones have a more traditional sticks-straight-out plug.
I am looking to fix this problem myself. I plan on opening up my iPod to install a new battery and maybe fix the other problem I am having (see my other thread), and I am not afraid of the insides of the device.
What I am asking is if anyone else has had this problem, or a something similar? My guess is that the headphone jack's solderpoints on the PCB have become loose, so if I go in there and resolder the jack then I hope everything is hunky-dory. I've seen repair sites that sell the entire headphone assembly for like $50. Would it be better just to replace the whole thing?
Please note that I have no intentions (nor the money) to have a "genius" fix my iPod. (Where's the fun in that, anyway?) Further, I can not afford (and will not buy) another iPod, so that's out too. I am simply looking to fix my iPod and keep limping along until I can afford a newer mp3 player.
Any help is appreciated
tom

Hello,
It looks to me that it can be caused by the bad contact of the metal parts of earphone jack or the loose of its solder with the mother board. Both of them should not be too difficult to deal with if you are good in small elect. device.

Possible Solution to Speaker Sounds or Channels Cutting Out or Miss

I was playing Oblivion and noticed my 4. Xfi setup sounded odd ... checked in Creative's THX Setup control panel and it was set to 4., but when I checked the right front speaker I got nothing and it sounded like the right front was somehow being mixed with the two rear speakers ... very frustrating. This has happened to me before and there are a lot of posts from users who have experienced it as well. I think the last time I uninstalled and reinstalled all the drivers to fix it but I didn't want to hassle with that this time so I tried something simpler first. I clicked on "Restore Defaults" in the Audio Console and now I'm getting all four channels again, from the correct speakers ... Not sure what setting made the difference, but I'd recommend trying "Restore Defaults" to anyone who has a missing channel ...

Hi
I may have the solution to slow performance when using multi core processing. I was testing out realflow 2013 and noticed simulations were talking a long time to finish when using maximum threads 32. I set the threads to 8 and the simumlation was twice as fast which did not make any sense to me. The simulation was taking 1min 24 secs to finish using 32 threads and 45sec using 8 threads. I realized their has to be a problem here. So I went into my BIOS and disabled Hyper Threading. So now instead of having 32 threads I only have 16 threads. When i went back to try the same simulation again this time the 16 threads was only taking 24secs to finish. and the 8 threads was taking 35secs to finish. This made a lot more sence to me.
Anyway so once I realized that turning off Hyper Threading fixed my simulation problem maybe it might be the cause of my slow performance in AE using multi processing. I tried AE and now multi processing is working great very fast now and stable. MP renders start right away now instead of getting stuck on frame 2 or saying initializing background processes and never ever doing anything. Before I had to keep disabling MP and re-enabling it in AE to get it to start working again and still it wasen't very stable
If anybody is having issues with slow performance from their Multi processor systems try disabling Hyper Threading in the BIOS it might just fix your problem.
Hope this helps

Unwanted freeze frame after cutting out clip

I have a video clip I want to cut a bit out of. I split the playhead (Apple-T) before and after the bit I want to remove, remove the bit I don't want, and join the remaining clips together.
When I play the movie back, the last frame before the cut freezes on the screen for a few seconds, covering the first part of the clip after the cut.
When I scroll the playhead (using the arrow keys), the video looks normal. I only see the frozen frame when I play it.
I've tried adding a transistion, but the frozen frame pops up after the transition. I've added black space, but the frozen frame appears after the black space.
The audio either plays normally or stutters a bit.
This doesn't happen all the time, but I'd like to know how to fix or prevent it.
Thanks,
Rob
iMac 2Ghz Intel Core Duo Mac OS X (10.4.7)

If all else fails I'd select the offending clip and maybe also the neighbouring clips and export them as Full Quality DV and import it back. If that single concatenated clip plays OK you could delete the duplicates.
If also that fails, I'd re-import the offending clip from tape.
If also that fails, I'd start regular troubleshooting about some more widespread problem.

Headphone Jack, Right + Left Channels cutting out

Hey guys I did a search and found some older posts about this problem, I was just wondering if there were any more recent people experiencing this problem.
I bought my iPod last december and it just started. I thought it was the buds, but my Sennheiser HD 433's are susceptible too. If I wiggle it around sometimes I can find the sweet spot, otherwise its unlistenable.
Can I take it to the Apple store even if I bought it online? Too bad cuz I was just there yesterday buying my new Macbook 2.0mhz/1.0GB RAM/80GB HD, lovin' life with this thing!
thanks guys

Yes, you can take it there.
They sometimes will replace the iPod at the store.
I was just there yesterday buying my new Macbook 2.0mhz/1.0GB RAM/80GB HD
Dude, you got RIPPED OFF!
Take it back and get the 2 GHz model. It's about a zillion times faster!
(yes, I know it was a typo)

Re: Creative Gigaworks T3 Power Cutting Out AS WELL!!!!!

This is a response to the same fault on the gigaworks T3 as mentioned in this post here : http://forums.creative.com/t5/Speaker-Systems/Creative-Gigaworks-5--G550W-Power-Cutting-Out/td-p/430593?
hi! I am from New Zealand. I?just purchased?a set of Creative Gigaworks T3 for just DAY(the first day)! and I am encounter the same kind of problem mentioned in this post/topic . it Shuts off by itself or (power cutting out) . most probably would be the overheating cut off problem as well , all symptoms are the same as described this this post!
I cannot believe this is happening to the whole line of Gigaworks subwoofered speaker systems. I also have the Gigaworks T40 SII and are working mint. but seems like the subwoofered ones are the ones with this overheating cut off problem!!!!!
Man I trusted Creative for its quality of its products as I have always been Ultra impressed for the Creative Cambridge FPS2000 which I had own for the last 10 years until the remote switch became faulty 2 years ago (volume fluctuates), but thats acceptable for so many years of use!! they were the best ones and love them!?
BUT? I dunno about these current line of Gigaworks systems. they all seem to be faulty with this problem
do you think I should get a replacement or just get a refund IF I CAN.
a replacement might do the same thing?
cheers !!
ken

here is an update of what happened to my faulty Creative Gigaworks T3 system.
I returned it the next day the shop opened back from new years which is the Jan 4th, 2010 . I told them about the problem I was having and also printed out the dicussion from this forum on the Gigaworks G550W http://forums.creative.com/t5/Speaker-Systems/Creative-Gigaworks-5--G550W-Power-Cutting-Out/td-p/430593 . which I told them was the very same problems as discussed here and seems to be like a common fault or design problem of the gigaworks (subwoofered) series from creative!!
I was treated in a very bad and unhelpful manner from the store. and straight up. there is no refund!. and they seem to think I was lying about all this and making it up trying to get a refund ?!!
wtf I came all the way back (50km retrurn) waste my valueable time waste gas to muck about na I don't think so!? but to them I was a lier which had nothing better to do. " they say , you say its faulty, but We don't know" and they said , if the supplier say can refund then we will definitly refund... or even we test it out have problem, the supplier will have to test it again to confirm if there is a problem then to see if they will repair or replace. of course I wanted a refund as this a design problem and will happen again shortly!!! I had no choice but to leave it there , so I left it there on the 4th. anyway I was treated the worse I've ever been treated for any purchase at a store
week later. TODAY the 12th Jan. I received a txt message saying " this is xp computer warehouse, just 2 let u know ur creative speakers has been returned from the distributor as no fault to be found, n its ready 4 pick up "
of course there was no fault if it was tested for 5 minutes!!!!!!!!!!!! its the overheating problem after being used for over 2 hours or so. but I'm sure they know about this hard,. how can they not know if its happening all the time. they just can't be bothered, they would of just said "ah f--- it!!"
So i'm going back on sunday 24th Jan to get a refund as they have failed to meet the Repair/Replace or refund policy, if nothing works out then the last thing (which I really do not wish to do) it to Disputes Tribunal at the courts , a bloody hassle and a waste of f----- time! seriously. if creative would just sort it out or even open and fix it I'd be a really happy customer!
but for things that are going now , its definitly not right!
think about it before buying your Creative Gigaworks T3, just sharing my personal experience here , and it ain't good!
I'll keep you updated on sundays results.
what a pain

Gigaworks S750 + Audigy1 - Only hear left channel in left and right speakers

Since last week I'm the proud owner of a gigaworks S750. Since my new computer went RMA I decided to hook it up on my old computer with an Audigy (SB Audigy E400) audio card.
The original Audigy drivers come with this test program that tests all channels saying "front left", "front right" etc etc through the respecti've speakers.
However, when running this test program I hear the "front left" message through both the front speakers, and the "rear left" message through both the side speakers.
The "front right" and "rear right" messages I don't hear.
I've been looking through the settings of the audigy and reading the manual of the Gigaworks set, but nothing turned up.
My old Philips 4.1 speakerset did not have this problem, so my guess is it's something with the gigaworks.
Thanks

U sure the speakers are set to 7.1 ? BTW u need Audigy 2 ZS or Audigy 2 Platinum to make all your speakers make the correct sounds. BUY A NEW SOUNDCARD!!!
Message Edited by DexterLabs on 02-06-2005 01:30 AM

How can I smooth a clip with part cut out?

How can I smooth a clip with part cut out? Someone walked in front of the camera when I was shooting; I removed the frames with the person in them, but this left a slight visual hiccup. What's the best way to smooth this out in APE12?

If you do not have a "cut-away," as Steve mentions, then with those problem Frames removed, I would add a Cross-Dissolve between the two Clips (two Clips, after you have cut out the offending footage), BUT, one thing to consider with any Dissolve Transition, is Handles. You need enough to allow for the Transition - so you might need to Trim the first Clip a few Frames more, and the following Clip, a few Frames less. For a bit more on Handles, see this article: http://forums.adobe.com/message/3727485#3727485
Good luck, and hope that helps.
Hunt

S750 Front and Rear Channels failed

My new (3weeks) Gigaworks S750 System's front and rear channels have failed. Only the side/center/sub channels play back sound.
For the reference the sub still plays the LFE on those channels.
If there is a fix, I will do it. If this is a defect, I am going to Logitech. Buying a $500 speaker system implies it should work perfectly.

Hi,
I hav got the same problem with my system. Check if you have put the Speaker Setup in 7.1 mode or not. To do this,
Control Panel > Sounds and Audio Devices > Click Audio Tab > Click Advanced button under Sound Playback to open Advance Audio Properties window.
Click Speakers tab > In Speaker Setup, select the type of speakers. In your case, select "7.1 Surround Sound Speakers". Try this and let me know if your problem got solved.
Rahul

Sound Cutting Out on Standard Def Channels with or wthout DVR

Hi!
We are having occasional sound drop-out problems. They seem to only be happening on standard def channels although we have a hi-def box. (We often record sitcoms and kids shows in standard def to save room on the DVR.)
The problem is that the sound cuts out for a fraction of a second (just long enough to notice) at random spots. If we rewind and play it back, it still drops out in the same spot so it seems the issue is with the signal getting to the box from the outside line, not an hdmi cable issue as I've seen mentioned elsewhere.
The issue occurs whether we're watching a previously recorded show or a "live" one (understanding that even the live shows are delayed a few seconds to enable the DVR to record it).
I've seen other sound issues related to switching channels but this is not the case here.
I've also had it happen on a small TV with no box. We just have the coax going right into the display to watch standard def network shows on it. This leads me to think it's a signal issue, not a DVR one.
Anyone else have this and/or have any luck in getting it resolved?
Thanks!
Jeff

Hello Jeff,
I am sorry to hear that you are having trouble with the sound on the Set Top Boxes. I sent you a private message to further assist you.
Thanks,
Shamika_Vz
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Cutting out images in indesign, clipping path problems

Hi,
I have been putting images of my drawings from photoshop onto indesign for my portfolio, after looking around the only way I can seem to find to cut them out is using clipping path/detect edges.
The problem I have is because they are scanned sketches this method produces really inacurate and shoddy results and no matter how much I play around with the threshold and tollerance this means I still have to mess around with the pen and arrow tool for ages on each image.
Is there a quicker solution to cutting them out like the magic wand or lasoo tool on indesign?
It has taken days now in in design , I have all the images already cut out from their original pages on photoshop but the white box always comes around again when I drag or place the images in indesign.
I have been shorcutting some pages and doing layout on photoshop and placing the image behind which works fine sometimes but is really inconviiant when I want to move the layout around text ot anything...... i have attatched some pictures to show you what I mean.
Thanks for your help in advance
Leo

Well Thats 2 days of my life Ill never get back!
Thankyou very much! cant belive I was that stupid

Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

No.
OT

Front earphone plug does not cut out speakers or plays any sound

I have an HP Pavilion Media Center TV m7480n Desktop Pc. I upgraded to Windows 7 32. After install the front earphone plug no longer cuts out the speakers or plays any sound. I updated all the Realtek drivers. In Realtek HD Audio manager the green and pink front plugs are light color. I tried both the advanced settings to play back devices. Neither work. I had the front plug and the headphones checked out and both are functioning. I have been using the rear plug for my headphones and switch plugs with my speakers when I need them. I miss my front plug. Any Ideas?

Hi CanadaDry,
You probably just need to update either your audio driver or your chipset directly from the component manufacturer. I'd start with the audio driver first if everything else on your PC is working after the upgrade. But if there are other things not quite right like USB ports not working, then I would install the chipset driver update too.
Your PC has a Realtek Audio Device, so here is a link to the Realtek downloads:
http://www.realtek.com.tw/downloads/
Select "High Definition Audio Codecs", accept the agreement, and then download and install the Win 7 32bit driver.
If that doesn't work, here is a link to the Intel 945P Chipset driver for Win 7:
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19607&lang=eng&OSVersion=Windows%207%...
I hope this helps. Let us know how it goes.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Video Clips Cutting out

Can somebody please help?
I have copied some video clips into itunes and onto my Ipod classic. When they are in Itues they play correctly. When I play them on the Ipod they cut out about 2/3rds of the way through so I keep missing the ending.
Any advice greatfully received.
Thanks

hi patrickmathews,
Welcome to the Lenovo Forums.
Can you try to:
1. Try to change HDMI port and set HDMI source on the TV accordingly
2. Adjust the resolution of the PC and on the TV to 1024x768 and check if you the video still goes black on the TV. If everything works ok, gradually adjust the resolution.
3. If the Vizio has a default refresh rate of 120Hz, try to lower it down to 60hz
4. As per this reference, try to use a different HDMI 1.4/1.4a cable or a component cable to see if it's a cable problem or the HDMI port on the TV.
Let me know your findings
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Sound Cuts Out Half Way Through Clip

I'm importing an AVI file into iMovie HD to edit it. There is nothing wrong with the file itself, there's sound the whole way through, but when I import it into iMovie the sound cuts out at a certain part. I've tried uploading it multiple times and every time the sound cuts out at the same part of the clip. I can't figure out what's wrong.

Welcome to the discussions.
AVI isn't a format. AVI is a container, just like MOV. These containers can contain video in any format (=codec) of the hundreds available. Which codec is YOUR video encoded with?
http://en.wikipedia.org/wiki/Video_codec
http://en.wikipedia.org/wiki/AudioVideoInterleave

Gigaworks S750 front channels cutting out/clipping

Similar Messages

Maybe you are looking for