Gird Control problem:Host:clicking on performance tab

Clicking on host performance tab generates an error.
Error getting data for target Hostname. Exception: oracle.sysman.emSDK.emd.comm.MetricGetException: Row(14): NUMBER type column pmem='-' has invalid number format Switching to the last 24 hrs view.
Thanks In Advance.

Have you looked up your version number in the Knowledge Base at metalink?
Without a lot more information there isn't much anyone can do to help you beyond the referral.

Similar Messages

Problem when clicking links add tabs occur

Hello
i have been having some problems lately ( 3 days now ) what is weird since i haven't installed in a while.
that when i click a link a different tab opens and redirects to a add website.
i also see when i get a pop up its first a different website link that the it redirects to but then in less than 2 millisec it changes to a different add.
here is a report of my computer if this can help finding the cause
http://pastebin.com/fXPWnE02
i've been reading the forums for the problem and it seems im infected with one of a malware but i believe its a new generation cause i'm unable to find it and delete it
if someone could help that would be great !
thank you for your time

You don't have any known kind of adware. You do have something called "soluto" that I've never seen before. I'm not sure what it is.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

How can I visit the performance tab when the target DB is down?

Hi, All:
I wonder if it is possible to visit the performance tab when the target DB is down. I thought it should be possible. But whenever I first click the performance tab, I will be asked to enter the user/passwd for the target db(I have set the preferred credentials).
Furthermore, is it possible to analyze the history sql/performance if the target db is not startup? and how can I do it?
Thanks in advance

I have seen other postings by the same ID and my suggestion is that you have a look at the Enterprise Manager Documentation Library. After that, you can ask questions relating to subjects you cannot solve with the documentations.
http://www.oracle.com/pls/db102/portal.portal_db?selected=21

Grid Control performance tab not available when on the target home of ASM

I noticed recently that the "Performance" tab/link is not available when you are using 10g Grid Control and you are on the home page of an ASM instance. Can this be explained?

Hi MarGur
I try to help you. The OEM Grid Control in some times not discover the Oracle 9i databases and you must to add manually.
First, check in your target machine that the user owner of agent software have rights of read and write in the ORACLE_HOME directories of Oracle 9i databases.
Go to Grid Control Console
Select Targets ---> Databases
Press Add --> Select the host ebisdb2.oneshield.com and press continue
The automatic discover process begin. When finished is very normal that nor discover the Oracle 9i databases. You press the Add manually button
in the page that appear you must entry all the configuration information of database:
ORACLE_HOME directory
DBSNMP USER
DBSNMP PASSWORD
HOSTNAME
PORT
SID
Check that the dbsnmp user in your database is unlock and press the TEST button to verify the connection work fine.
After this many windows appear of configuration process, and you will put the sys password and host credentials.
If you have problems, tell me
Regards

Performance tab in Cloud Control 12c

Hi guyz,
How can I activate Performance tab in EM Cloud Control 12c? Do I need any license or is there light version?
In Grid Control 11g it was easy to activate.
Thank you beforehand.

Could you please confirm the Database Diagnostic Pack and Oracle Tuning Pack is enabled for the database.
From the Setup -> Management Pack -> Management Pack Access
To enable the Management Pack for Oracle Database:
From the Setup menu, select Management Packs, then select Management Pack Access.Enterprise Manager Cloud Control displays the Management Pack Access page.
In the Management Pack Access page, from the Search list, select Database ===> It will lists all the Oracle Database targets being monitored.
From the table, for the select your Oracle Database target and enable the Oracle Diagnostics Pack, Oracle Database Tuning Pack and click Apply.
For licensing information on the Oracle Diagnostics Pack and Oracle Tuning Pack
Ref to:
http://docs.oracle.com/cd/E24628_01/doc.121/e24474/toc.htm
Understanding the Management Packs in Enterprise Manager (dbconsole, grid control and cloud control) (Doc ID 1566956.1)

RoboHelp 8 crashes when clicking See Also tab of Design-Time Control Properties

My project was previously in RoboHelp 7 and is a merged project. I copied a topic with see also buttons and want to edit the links. I right click the button and select Design-Time Control [name] Properties and click the See Also tab. RoboHelp crashes every single time. Error message:
EventType : BEX
P1 : RoboHTML.exe
P2 : 8.0.0.203
P3 : 4944f3bb
P4 : CLIENTMONTEREYDB.dll
P5 : 8.0.0.203
P6 : 4944e14d
P7 : 000016aa
P8 : c0000409
P9 : 00000000
One thing that is a little strange is that some of the buttons have Design-Time Control [object1] Properites and some have Design-Time Control [RelatedTopic] Properties, but all have the See Also tab.
If I insert a new See Also button using Insert > See Also, the menu choice is Design-Time Control [See Also] Properties and the tab is See Also. Click the tab and RoboHelp crashes.
If I insert a new Related Topics button using Insert > Related Topics, the menu choice is Design-Time Control [Related Topic] Properties and the tab is called Related Topics. Click the tab and RoboHelp does not crash.
I have a whole lot of these buttons I need to modify, so I'd appreciate if anyone knows of a solution to this problem.
Sample HTML for an offending button:

<object
classid="clsid:ADB880A6-D8FF-11CF-9377-00AA003B7A11"
    type="application/x-oleobject">
<param name="Command" value="ALink,MENU" />
<param name="Button" value="Text:See Also" />
<param name="Font" value="Verdana,8,0,,BOLD" />
<param name="Frame" value="" />
<param name="Item1" value="" />
<param name="Item2" value="ChgSubErrSeverity - see also" />
</object>


Hello again
Bummer that!
First, I'll answer something I failed to earlier. You said that sometimes it says SeeAlso and sometimes it's object1. Here's the deal on that.
When you click Insert > See Also the first time in a topic, the control is named SeeAlso. If you copied and pasted or clicked Insert > See Also again, the first time you did that it would be object1 or OBJECT1 depending on whether you used the menu or you copied and pasted. This is because each of these must use a unique name. So is it possible that you disliked seeing object1 on some and you renamed so the second (or third) also was named SeeAlso? I could see that causing RoboHelp to gag.
Assuming that's not it, what about topic filenames or titles? Do any of them have unusual characters in the names? Any character other than 0-9, a-z, A-Z or an underscore ( _ ) is suspect. Perhaps an odd character is tossing a monkey wrench into the works.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Im having problems with Safari 5.1.10. I often have several tabs open on screen. And after a while the links/websites become not active. So if click on a tab and want open a previous website it than has to re-load again in the window. Can I change this ?

Im having problems with Safari 5.1.10. I often have several tabs open and after a while the links/websites become not active. So if click on a tab and want open a previous website it than has to re-load again in the window. Can I change this ?
Kind regards,
Faroek Abdoelrahman
The Netehrlands

Empty the Safari cache more often.
From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Quit and relaunch Safari to test.

Java.lang.OutOfMemoryError when click on the "performance" tab in dbconsol

THis is 10.2.0.3 DB on Oracle-Linux Rel5. I got the error "java.lang.OutOfMemoryError" in "emoms.log" whenever I click on the "performance" Tab in DBCONSOLE. The rest of the dbconsole features is working fine.
Please help...
Thanks!

It was and Oracle bug#6469196/5880921. I installed patch#5880921 and It foxed the proble.

Is anyone having problems syncing iPhoto to iPad 2 after iOS 7.0.3 update? when I click on photos tab, I get a circular dashed loading icon that is perpetually there. It never loads the library

When I click on photos tab, I get a circular dashed loading icon that is perpetually there. It never loads the library. i dont even see the iphoto content! thx for your help!

I am certain too that it is possibly the 7.0.3 update. Have you tried restoring from backup? I am uncertain that might work but its worth a try.
If that doesn't work I suggest that you give feedback to Apple directly. The more about this problem, the quicker it will get resolved.
Here's the link: http://www.apple.com/feedback/ipodtouch.html
Best,
OrlaG

HT5648 After uninstalling and installing several times, Java plug-in is still undetected. Support suggested I open up the control panel and click update but there isn't such an option. The advance tab, there aren't any options to enable or disable plug-in

After uninstalling and installing several times, Java plug-in is still undetected. Support suggested I open up the control panel and click update but there isn't such an option. The advance tab, there aren't any options to enable or disable plug-ins.

If you're running Java 7, then in System Preferences > Java > Java Control Panel in the Security tab there is a check box to enable Java in your browser. To check for update go to the Update tab.

Performance tab disabled in Grid Control

Enterprise manager tab performance is disabled in Grid Control. How to enable it?
Regards,
dba

Hi,
This is because your management packs were disabled, You can enable these management pack - "DIAGNOSTIC" pack to get this performance tab.
The following document, helps you to navigate to the location where you can enable /disable the packs.
http://www.oracledistilled.com/grid-control/disabling-access-to-management-packs-in-oracle-enterprise-manager-11gr1-grid-control/
Best Regards,
Venkat

10g grid control. minimum DB privileges for database performance tab?

database -> performance tab -> log into database.
what are the minimum privileges needed for this? I normally use DBA privs. However, I need to give access to non-dbas. When I try to log in with their account, it says see the help. I have been hunting through the help, but can't find anything about this.

This article may be of use: http://dbastreet.com/blog/?tag=grid-control
If you "grant select any table" (Query tables, views, or mviews in any schema) to the role oem_monitor you get what you want. Maybe an overkill but thats what I can think of now.
Eric

Problem Hosting an ActiveX which starts VB6 Forms in WPF

We need to “host” an older application written in VB6 into a WPF Shell. We need to make sure that this app is part of the new WPF shell.
The older app consists of:
1) ActiveX component that shows a grid with data and some buttons;
2) By selecting a record and double clicking a record a Modeless VB6 form is opened. This form is implemented in an in process vb6 app;
From these modeless form, other modeless forms and modal forms can be started by the user.
Showing these modeless forms that are implemented in the “in process” windowless ActiveX components gives us problems. We have tried out two options to get around the problems. But so far no success.
We have explored two options:
1) Host ActiveX component directly in WPF, which gives us problems with modeless forms and ‘tabbing’ though the controls of the form;
2) Start vb6 exe, host the ActiveX component there and then host the output of that VB6 exe in WPF: we now face some challenges with the communication between form and WPF shell;
In both cases we face some challenges with regards to the keyboard navigation. We want an have expert opinion on this matter. Does anyone have some tips on this topic?

Thanks.
Let me try to describe the problem in some more detail. I have build a solution, that is a very simple representation of the actual problem we are facing. But without our own system layer and controls
(etc).
The example solution consists of:
VB6 ActiveX dll, representing one of our maintance apps: containing a class and a form. The class creates instances of the form and shows the form;
VB6 control (ocx), representing our custom control, which instantiates the class;
VB6 exe, representing our 'old Shell', which hosts the VB 6 control;
WPF exe, representing our 'new Shell', which hosts the VB 6 control.
In the 'new shell' we have hosted an vb6 control (ocx), by using the WindowsFormsHost object. This is done in a way described in the "Walk through" (http://msdn.microsoft.com/en-us/library/ms742735.aspx
The VB6 control consist of two buttons: 'show modeless form' and 'show modal form'. The buttons create an instance of the class and instructs the class to either start the form modal or modeless,
by calling public methods of the class.
When starting the VB 6 app, the user can start new modeless forms and modal forms without any problems. This is how our current (VB6) Shell works.
Now we want to move our solution to a newer platform, but gradual, no big bang conversion: the real system is large and complex. In the first phase we don’t want the touch the legacy apps.
We created a WPF exe that hosts the VB6 control. The user can start the modal form without any problems. However clicking the 'show modeless button' raises an error:
Run-time error: '406' Non-Modal Forms cannot be displayed in this host application from an ActiveX DLL, ActiveX control or property page
We figured out that we
have a fundamental problem here.
(some related docs we have consulted
http://www.kbalertz.com/247791/Modeless-Forms-ActiveX-Display-Clients.aspx ,
http://support.microsoft.com/default.aspx?scid=kb;EN-US;171978 ,
http://www.desaware.com/support/faq/spyworks/swfaqthreading.aspx )
Instead of doing the frm.Show vbModeless, we now call the ShowWindow() api. This shows the user the modeless form, with some side effects like a 'tab key' that doesn't work as expected (and probably
some other effects we didn't find out yet).
From the user perspective, only showing modal forms is not an option (as is suggested in
http://support.microsoft.com/default.aspx?scid=kb;EN-US;171978)
We are now looking
into hosting the VB 6 control in a VB6 exe and then host the VB6 exe in WPF.
We then face some challenges in the communication (and navigation) between the two applications.
I have looked also into this document
http://blogs.msdn.com/b/changov/archive/2009/10/26/hosting-wpf-ui-cross-thread-and-cross-process.aspx (and related docs) as well, but
the same issues persist here as described.
I hope this narrows down the problem a bit more. Do you have any other leads or paths we can follow?
I can send you the simple example I have created that reproduces our problem.
Sincerely,
Bart

Oracle Enterprise Manager "Performance" tab (Oracle 10g)

Hi,
How to I make a report based on Performance TAB.
View Data -> Historical
Sessions
Runnable Process
Active Sessions
Instance Disk i/o
Instance throughput
Explain : What is (example :*what is session for?* ) , What is X and Y (example :*what is X = Y= Time and date*)
Please reply.. I need it by today.. :(

The help file explains it a lot better than I can... therefore:
Interpreting the Host: Average Runnable Processes Chart
If you have opted to show both the CPU cores and CPU threads,
consistent values somewhere between the two line values may
indicate that too many users are waiting in line for CPU time.
Compare the values with those of CPU Used in the Average Active
Sessions chart. If the sessions value is low and the run queue
length value is high, this indicates that something else on the host
other than your database is consuming the CPU.
If you have selected Memory Access mode, the Host chart does
not initially display historical data, except when the screen was
loaded recently and cached historical data is still available. Host data
is cached starting from the time the screen was first accessed,
and gradually fills the history on the Host chart.
Interpreting the Average Active Sessions Chart
The Session Count is computed by categorizing the time
that all active sessions consumed in the last sampling interval
into different wait classes, summing the amount in each wait class,
and dividing it by the sampling interval. For example, If there
are 3 active sessions in the last 15-second sampling interval, and
each session spent half of the time (7.5 seconds each) on CPU
and half of the time idling, then 3 x 7.5 / 15 = 1.5 active sessions
on CPU appear for that sampling interval.
Compare the peaks on the Average Active Sessions chart with those
on the Instance Throughput charts. If the Average Active Sessions
chart displays a large number of sessions waiting, indicating internal
contention, but throughput is high, then the situation may be
acceptable. The database is probably also performing efficiently if
internal contention is low but throughput is high. However, if internal
contention is high but throughput is low, then consider tuning the database. Selecting Memory Access Mode for Slow or Hung Systems
You can click the Monitor In Memory Access Mode link in the Related Links section to enable Memory Access Mode. The Database Performance page reappears with a Disable Memory Access Mode button and a Switch to SQL Access Mode button in the upper right corner.
You can temporarily disable Memory Access Mode by clicking this button, upon which the Database Performance page reappears in SQL Access Mode. To reactivate Memory Access Mode, click the Monitor In Memory Access Mode link again, then click Enable Memory Access Mode when the Database Performance page reappears.
In Memory Access Mode, performance statistics are retrieved directly from the Shared Global Area (SGA) using optimized/lightweight system-level calls as an alternative to SQL. Memory Access mode avoids the computation associated with parsing and executing SQL statements, thereby making it ideal for severe cases of library cache contention that can prevent the instance from being monitored in SQL Mode. You should switch to Memory Access Mode for slow or hung systems.
Pages in Memory Access Mode contain data sampled at a higher frequency than pages in SQL Mode. (Charts may appear to be slightly different from SQL mode for this reason.) Consequently, Enterprise Manager provides better information about where events begin and end, and can also handle short-duration events that might otherwise be missed.
>
It basically tells you how much of a given resource was used at a point in time.
John

"Check Statistics" in the Performance tab. How to see SELECT statement?

Hi,
In a previous mail on SDN, it was explained (see below) that the "Check Statistics" in the Performance tab, under Manage in the context of a cube, executes the SELECT stament below.
Would you happen to know how to see the SELECT statements that the "Check Statistics" command executes as mentioned in the posting below?
Thanks
====================================
When you hit the Check Statistics tab, it isn't just the fact tables that are checked, but also all master data tables for all the InfoObjects (characteristics) that are in the cubes dimensions.
Checking nbr of rows inserted, last analyzed dates, etc.
SELECT
T.TABLE_NAME, M.PARTITION_NAME, TO_CHAR (T.LAST_ANALYZED, 'YYYYMMDDHH24MISS'), T.NUM_ROWS,
M.INSERTS, M.UPDATES, M.DELETES, M.TRUNCATED
FROM
USER_TABLES T LEFT OUTER JOIN USER_TAB_MODIFICATIONS M ON T.TABLE_NAME = M.TABLE_NAME
WHERE
T.TABLE_NAME = '/BI0/PWBS_ELEMT' AND M.PARTITION_NAME IS NULL
When you Refresh the stats, all the tables that need stats refreshed, are refreshed again. SInce InfoCube queries access the various master data tables in quereis, it makes sense that SAP would check their status.
In looking at some of the results in 7.0, I'm not sure that the 30 day check is being doen as it was in 3.5. This is one area SAP retooled quite a bit.
Yellow only indicates that there could be a problem. You could have stale DB stats on a table, but if they don't cause the DB optimizer to choose a poor execution plan, then it has no impact.
Good DB stats are vital to query performance and old stats could be responsible for poor performance. I'm just syaing that the Statistics check yellow light status is not a definitive indicator.
If your DBA has BRCONNECT running daily, you really should not have to worry about stats collection on the BW side except in cases immediately after large loads /deletes, and the nightly BRCONNECT hasn't run.
BRCONNECT should produce a lof every time it runs showing you all the tables that it determeined should have stats refreshed. That might be worth a review. It should be running daily. If it is not being run, then you need to look at running stats collection from the BW side, either in Process Chains or via InfoCube automatisms.
Best bet is to use ST04 to get Explain Plans of a poor running InfoCube query and then it can be reviewed to see where the time is being spent and whether stats ate a culprit.

Hi,
Thanks, this is what I came up with:
st05,
check SQL Trace, Activate Trace
Now, in Rsa1
on Cube, Cube1,
Manage, Performance tab, Check Statistics
Again, back to st05
Deactivate Trace
then click on Displace Trace
Now, in the trace display, after scanning through the output,
how do I see the SELECT statements that the "Check Statistics" command executes
I will appreciate your help.

Gird Control problem:Host:clicking on performance tab

Similar Messages

Maybe you are looking for