GIS-Ai Trouble Filling Curves

I exported a map from ArcMap 10.2 to Ai CS6 on Mac OSX Mavericks. I am trying to change the fill color of the roads network from none to grey. I swear I have done this before, but when I try it this time the fill doesn't work how I want.
The method I am using is:
- select the objects by clicking on a part of the road with the Direct Selection tool and then use Selection>Same>Stroke Color to select the entire street network.
- use the fill button on the toolbar to fill.
When I do this, some of the areas outside the selection fill and some areas inside don't. I have attached a screenshot.
I tried making them into a compound path, because I read about Even-Odd vs. Non Zero Winding Fill Rules and thought that might help, but when I try it says "Can't make compound path from objects that are in different groups".
What should I do? Thanks so much!!

Thanks for your speedy reply!
I don't think this is the case, unless I just don't know what an unjoined path looks like. When I select the roads, there is a blue line between the anchor points, even where the fill goes wrong. I also tried Object>Path>Join and still the same result.
Any other thoughts?
Thanks again.

Similar Messages

Illustrator fills curves unwanted

Hi,
when using my own brushes in Illustrator (which aren't very complictated, just "pressure-sensitive" as you can see in the example)...
... Illustrator fills the curves automatically.
Not, when I'm drawing large format, but once in a while I have to draw small vignettes or want to reduce the size. Small means: about a centimeter.
First I thought it might be a problem with the wacom tablet I got, but the support convinced me, that it had to be a problem with the software... I had the same problem already with CS3 and 4, now again with CS6.
Maybe it's only a problem with the settings, but it drives me crazy.
Thanks a lot,
Staubfluse2000

Thanks for your quick answer!
And Adobe isn't able to fix it?
What I do since years (now that I know that it's not my fault I can betray it without feeling like a fool:) is cutting the lines.
But it's more than annoying...

Trouble with curves + trackpad, can't undo

When I try to adjust the curves of a layer with a vector mask using my trackpad (clicking with my thumb, and moving the cursor with my pointer finger) something other than the curves changes. I know it is not curves because 1) it is applied whether I click apply or cancel in the curves window and 2) whatever this thing is, I can't undo it with command-Z or the history pane. It's not the blneding mode, opacity or fill that has changed. I'm assuming it has to do with some sort of gesture I don't mean to be doing. I have been able to adjust other layers with regular raster mask just fine. It seems to happen when I move the curve point up and then back down on the same click. The layers I've had this happen on are also using a lower layer as a clipping mask. This is a real problem because the only way to fix it is to revert to a saved version before this happened.

Your IT Administrator must turn on ActiveSync on your corporate server before the account can be added. Talk to them about this.

Trouble filling out a form?

I've been trying to fill out forms for school on adobe reader x.
The form has last name then first name, etc.
Well, when I type my last name into the box, it also puts it into the first name box.
And when I erase my last name from the first name box, it also erases it from the last name box.
I've tried everything I can think of and it's really beginning to get aggravating.

Assuming the document doesn't have security restrictions that would prevent it, you can use the Select Object tool (left-pointing black arrow) in Acrobat, double-click either of the fields, and rename it so it is unique in the form.

Trouble filling out word form

Ok I am trying to get a form tht is in word filled out on my MAC. The form is in Word so it opens in text edit. The thing is it is supposed to be two sheets that are horizontal but it opens in text edit as one form that has both sheets on top of each-other compressed vertically. How can I fill out this form on my MAC?

I am going to assume that you do not have Office on your Mac, so here are instructions to edit and fil it out in Pages:
Make sure that the Pages application icon is in your Dock. Navigate to your Word document in Finder. Drag the Word document from Finder over the Pages icon in your Dock, and let go. Pages will now open the Word document in its native format, and you can fill out the form. Once you are done, you can save the changes you made to it by pressing Cmd + S. This will save it in the Word document you opened. If you navigate to the "Save" item in the "File Menu" it will save the document as a Pages document. Don't ask me why Pages does this, it's just a bug in the application.
Good luck,
Will

Is any one having trouble filling out a form on safari with lion?

Can't click on a text field and type. I have safari and lion!
Help Please!

Hello turboprob! I am sorry to hear of the trouble you are having with your phone! I certainly want you to have a phone you are happy with. I actually have the Turbo myself and with the most recent software update the voice & data has been running smoothly ever since. This link has all the benefits of the most recent update http://vz.to/1DZb6YH. Additionallly this link tells how to do the update, just in case you need it http://vz.to/1DZboyU . Let me know how this works out for you!
bryans_vzw
Follow us at Twitter @vzwsupport

Trouble filling out a PDF form

When I fill out a PDF form on my Macbook Air, all of the highlighted fields stay populated and the highlight disappears. When I look at the saved file on another Mac, like my iMac, the highlights are still there. If I click on them, the information becomes visible. But, if I then click on the next highlighted field, that information appears but the previous information disappears. If I try printing this form, the only information that prints is any box that needed a checkmark. Any suggestions?

Preview is a faulty application that corrupts PDF forms the moment it opens
them. You should avoid using it at all costs.
On Mon, Oct 6, 2014 at 6:13 PM, frustratedinDE <[email protected]>

Trouble filling in Adobe Form

1. The form was create in using LiveCycle Static Adobe 7. I
have had complaints that some people can open only drop down boxes,
but not text boxes. Some users have had no problems. All have Adobe
7 Reader. How do I fix this problem?
2. The form table was created using LiveCycle Stateic Adobe
7. The tab order is not consistant with the formating of page. In
setting tabs it reads correctly, but does not performs irr order.
The default is not working.
3. I have had trouble with users being able to use forms with
consistant results. All have been using Adobe 7 reader.

Bernd,
Thanks for checking this out, H'mmmmm don't you just love Local Authority Council's, seems they've changed the goal posts on their own forms..???
So much for technology & progress.
All the best,
Clayton.

Trouble with curve 9360

Hi everyone. I'm having a serious problem with my phone. It is a new phone and i started using it since 2 days only. First of all when i turned it on, it didnt ask me to set up a blackberry ID. I tried to put manually my old blackberry ID using blackbery protect but it stucks on "initializing ". I tried to set up my email account and it is not going through. As i'm using a wi fi, im trying to get BBM but it doesn't work also. What can I do?

Contrary to that advice, you don't need to wipe your device. You can, but you don't need to.
1. Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider? You must, in order to get the RIM push email functions you are looking for, as well as additional BlackBerry data services such as the internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more. So, call your carrier and inquire about having the BlackBerry Data Plan added to your account.
2. If you do already have this plan on your device, On your Manage Connections screen, click on the Services Status.
What is the status of the BlackBerry Internet Service?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Trouble on curve 9220

End call button doesn't work. is therepssible key to end a call or maybe it's on the settings?.. please help!!

Hi sherryl
Welcome To the Community
No there is no other setting to end a call,If you end call key is not working please try a battery pull restart like this Device POWERED ON remove the battery wait and then reinsert it back ,after device reboot see if that key works.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Filling subnodes in webdynpro for abap

I have a table with cardinaity of 0.n and a subnode with cardinality of 0.n. I am having trouble filling the subnode. When binding the data to the sub node I am getting an error u2018Access via 'NULL' object reference not possible.u2019 After method path_get_node lo_nd_funds is still initial.   What do I need to do?
My code:
DATA lo_nd_funds TYPE REF TO if_wd_context_node.
data ls_funds type table of z_fundtable.
navigate from <CONTEXT> to <FUNDS2> via lead selection
lo_nd_funds = wd_context->PATH_GET_NODE( path = 'TABLE.FUNDS' ).
data: node_path type string.
data: node_index type STRING.
loop at lt_repeat_table into ls_repeat_table.
    NODE_INDEX = SY-TABIX.
    concatenate ' DETAIL_TABLE.' NODE_INDEX '.FUNDS' INTO NODE_PATH.
    lo_nd_funds = wd_context->path_get_node( path = node_path ).
    append ls_repeat_table-FUNDS to lS_funds.
    LO_ND_FUNDS->BIND_TABLE( LS_FUNDS ).
endloop.
Thanks
Cindy

hi,Cindy
You know, when you want insert data into subnode, you should first insert data into its parent node if the parent node is initial.
So, according to your code, i think the parent Node " DETAIL_TABLE" should be inserted with data first.Otherwise you will get "Null Object " expcetion.
data: node_path type string.
data: node_index type STRING.
loop at lt_repeat_table into ls_repeat_table.
NODE_INDEX = SY-TABIX.
concatenate ' DETAIL_TABLE.' NODE_INDEX '.FUNDS' INTO NODE_PATH.
lo_nd_funds = wd_context->path_get_node( path = node_path ).
append ls_repeat_table-FUNDS to lS_funds.
LO_ND_FUNDS->BIND_TABLE( LS_FUNDS ).
endloop.
In addition, here, the cardinality is not very "Important". Why? though the subnode's cardinality is '0...n', however, in the static context node, you can see that "Subnode" must have one "Parent Node".
I don't know whether it can help or not.
Best wishes.

I have developed a fillable form using Adobe Acrobat Pro. The form has several fields and some of the information is captured in a bar code. What programs must be used to open the form to properly fill the form out? Adobe Reader, Adobe Xi, Ibook, etc.. I

I have created a fillable form using Adobe Acrobat Pro that contains several data fields with some feeding data to a barcode in the document. I have a "button" set up to save and send the completed form one it is completed. Some of the user are having troubles filling out the form as they are using various programs to do such as iBook, Adobe Reader, etc.... Sometimes the information is not transferred to the barcode and sometimes the "submittal button" doesn't function properly.
Please provide a solution or give me a list of the programs that must be used to properly open and fill out the form.
Greatly appreciated.

Best option is to use Adobe Reader (or Acrobat, of course) on a desktop computer (ie, not on a mobile device). Any other configuration is likely to be problematic.

Help required for Hilbert Space Filing Curve problem

Can someone suggest the algorithm for the following problem:
Given an N � N array A, generate the index of each location A[i][j] according to Hilbert Space Filling curve. The Hilbert curve generates the indices recursively as follows - for a 2 � 2 square the numbering is
2 3
1 4
For a 2^i � 2^i array, the array is first partitioned into 4 subsquares of 2^(i-1) � 2^(i-1). Then the indices of each sub-square is generated recursively such that the lower-left array has the lowest indices followed by upper-left array and then the upper-right and the lower-right array. Moreover, consecutive indices should be in neighbouring squares. For a 4 � 4 array, the indices are
6 7 10 11
5 8 9 12
4 3 14 13
1 2 15 16
Thanks

HeadSwipe wrote:
Can someone suggest the algorithm for the following problem:
Given an N � N array A, generate the index of each location A[i][j] according to Hilbert Space Filling curve. The Hilbert curve generates the indices recursively as follows - for a 2 � 2 square the numbering is
2 3
1 4
I'd recommend one that features recursion.
For a 2^i � 2^i array, the array is first partitioned into 4 subsquares of 2^(i-1) � 2^(i-1). Then the indices of each sub-square is generated recursively such that the lower-left array has the lowest indices followed by upper-left array and then the upper-right and the lower-right array. Moreover, consecutive indices should be in neighbouring squares. This IS the algorithm. You've been given it. You either don't understand it or can't code it.
I'd start wih a Matrix class that would make it easy to do the partitioning into submatricies. Then I'd write a method that would take a Matrix as an argument and call it recursively until I reached my 2x2 Matrix stopping condition.
For a 4 � 4 array, the indices are
6 7 10 11
5 8 9 12
4 3 14 13
1 2 15 16
ThanksSounds like you've been given the algorithm, now all you have to do is implement. That's where you come in.
%

My bb curve 8520

I updated my app world yesterday and since it has rebooted my phone won't work it is stuck on the screen i can't use my trackpad or go to the menu but I have tried taking the battery out and it's still the same and it's been on charge all day but I only have a iPad 2 so can't plug my phone to the computer help me plzzz!!!!

go to bb application world trouble shoot curve 8520 up date frozen look for one that says about splash screen and follow directions it works safe mode use short cut and then go back once safe mode achieved

Problem filling EVS from BAPI

Hi all... Im having troubles filling an EVS from a BAPI.
I have a BAPI that returns me a list with 3 fields but one of them always comes in blank.
This is my code:
Bapi_Costcenter_Getlist_Input entrada = new Bapi_Costcenter_Getlist_Input();
wdContext.nodeBapi_Costcenter_Getlist1_Input().bind(entrada);
entrada.setControllingarea("BUS");
wdThis.wdGetSolicitudViajeComContController().executeBapi_Costcenter_Getlist1_Input();
IWDAttributeInfo attributeInfo = wdContext.getNodeInfo().getAttribute(IPrivateCentroCosto.IContextElement.OBJECT);
ISimpleTypeModifiable costType = attributeInfo.getModifiableSimpleType();
costType.setFieldLabel("CostCenter:");
IModifiableSimpleValueSet valueSet = costType.getSVServices().getModifiableSimpleValueSet();
IPrivateCentroCosto.ICostcenter_ListElement elemCentroCosto;
for (int i = 0; i < wdContext.nodeCostcenter_List().size(); i++) {
     elemCentroCosto = wdContext.nodeCostcenter_List().getCostcenter_ListElementAt(i);
     valueSet.put(elemCentroCosto.getCostcenter(), elemCentroCosto.getDesc());
nodeCostcenter_List is the node that is filled when i execute my bapi. it has 3 attributes, desc,costcenter, co_area.
Costcenter and co_area are filled but desc is always blank, and if i run the bapi from sap backend it works okey
Any ideas?
Thanks in advance!

Hi IdhayaR , first of all thank you for your time.
1)
wdContext.nodeCostcenter_List().bind(wdContext.CurrentBapi_Costcenter_Getlist1_Input().getOutput().get<Costcenter Output node>());
I don't have that method, i did this instead:
wdContext.nodeCostcenter_List().bind(wdContext.currentBapi_Costcenter_Getlist1_InputElement().modelObject().getOutput().getCostcenter_List());
This didn't work :(.
One question: When i import the bapi, the model has a Bapi_CostCenter_Getlist_input class and one that is called Bapi_CostCenter_Getlist_Output. As i know, the input class has an Output node, that is filled when i execute the bapi trough the .invalidate() method. So, I dont need to create a model node for this class right?
This is my execute method code:
public void executeBapi_Costcenter_Getlist1_Input( )
    //@@begin executeBapi_Costcenter_Getlist1_Input()
     IWDMessageManager manager = wdComponentAPI.getMessageManager();
     try
       wdContext.currentBapi_Costcenter_Getlist1_InputElement().modelObject().execute();
       wdContext.nodeCostcenter_List().invalidate();
       wdContext.currentBapi_Costcenter_Getlist1_InputElement().modelObject().modelInstance().disconnectIfAlive();
     catch(WDDynamicRFCExecuteException e)
       manager.reportException(e.getMessage(), false);
    //@@end
2) I did that and it works perfect.
3) No errors
4) The client is setting the server for debug mode right now. Hope this helps me to solve the problem.
Another thing.... to see if i did thing the right way...
I imported the Model.
In the Controller Context i created a Model node and i BINDED the entire Bapi_Costcenter_Getlist_INPUT.
Then in my view, i MAPPED the model node from the Controller with a MODEL node of the View....
is this right?
Dont know why it returns me only 2 of the 3 values that are returned
Edited by: elale666 on Jun 30, 2010 3:22 PM

GIS-Ai Trouble Filling Curves

Similar Messages

Maybe you are looking for