Give commands to two keithley2400 at the same time

Hi All,
I would like to give commands to 2 keithley2400 at the same time and wish them to do current sweeping simultaneously at real time. That means I have run two loops simultaneously. It seems to be difficulat yet not so difficult since there is no dependency between these two loops... Is it possible? using what structure? The solution i use right now is a simple true/false button with two case structure. And of course it won't work. Sometimes two units will run simultaneously but most of the time they will run in order.

While multiadressing may get you "synchronous" enough it's by no means a guarantee that both instruments will really react equally fast when receiving the trigger command over the GPIB bus. For true hardware synchronized operation you will have to use the trigger bus on the back of the device to connect them together, select one of the 4 trigger lines to use and set them up correctly on both instruments, one as input and one as output and then send the trigger command to the device that drives the trigger line. That will give you synchronisation to microseconds accurate. GPIB multi addressing will be in the range of several milliseconds and sequential GPIB in the range of maybe 100 milliseconds.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

Write a progarm to test two parts at the same time

Hi:
I need to write a program in LabView that is capable of testing two parts at the same time.
Explanation:
I star the test on a unit, once all the electrical test is done move that unit to the pressure test without loosing the current test information and continue the test of the unit thewn generate a serial number only if it passes all the test. Then while the previous unit is going thru the pressure test star testing another unit for the elecrical test and so on.
I am using LabView 2012

From what you have described, I agree with what has been answered above. TestStand is specifically designed for. If you would like to provide more information about your application we could give you a more detailed response. For more information about TestStand follow this link
www.ni.com/teststand
Ryan
Ryan
Applications Engineer
National Instruments

Two profile two thunderbird at the same time with same user account

Dear,
I would use two Thunderbird at the same time for two different profiles with the same user accounts.
I using linux OS.
I was thinking of using:
# thunderbird -P profile1 &
# thunderbird -P profile2 &
But when launching the second command nothing happens.
Only brings in the foreground thundirbird already started.
If possible use this configuration now or in the nex future?

As a rule thunderbird only runs one instance of a profile.
However, there are a couple of options you could try.
You could use an addon to esily switch profiles:
* https://addons.mozilla.org/en-US/thunderbird/addon/profileswitcher/
there is more help here:
* http://kb.mozillazine.org/Run_multiple_copies_of_Thunderbird_at_the_same_time
It does say: 'Multiple instances is intended for debugging, so use it at your own risk'.
One method would be to use: Start > Run
"C:\Program Files\Mozilla Thunderbird\thunderbird.exe" -no-remote -P profilename
there is a space before '-no'
and also before '-P'
followed by a space and the profile name
You could create a shortcut/icon to run each separate profile.

Updating two tables at the same time

Please,
Does someone have an idea on how to update two tables at the same times?
Thanks a lot in advance

I was thinking about a single session and single update command.
That's why I thougth someone else could have a clue.
Thank you

Generat two signals at the same time and reading voltage

Hii
i have try to generate two signals at the same time and read voltage from another port on the board(not have to be at the same time), i have not alot of expriens in labview
and i based my code of example(http://zone.ni.com/devzone/cda/epd/p/id/5197) from yours site and try to suit to my needs
now my problem is when i generat the 2 signals(that work perfect) i canot read voltage from another port on my CB-68LP
i can not find the problem and make it over i hope there is away to figer out and fix it.
i have two cards 6229, and two CB-68LP board.
labview 8.5.
my code is look like this - http://img142.imageshack.us/my.php?image=scrennshot2no2.png
(this works perfect).
and this is my code after suit to my need - http://img183.imageshack.us/my.php?image=scrennshotfl5.png,there is error exception at the right side.
the exception-
Possible reason(s):
Specified route cannot be satisfied, because it requires resources that are currently in use by another route.
Property: RefClk.Src
Source Device: Dev1
Source Terminal: 10MHzRefClock
Required Resources in Use by
Task Name: _unnamedTask<0>
Source Device: Dev1
Source Terminal: None
Destination Device: Dev1
Destination Terminal: RefClock
Task Name: _unnamedTask<1>
eyal

sorry...
The AO tasks is very important they will be synchronize ,it is very importent the two tasks will start at the same time
and after it run at synchronize mode i will need to make reading of voltage
i gust try to make simulation of machin (i give that machin AO and reading from it voltage that all)
first of all i make the two signals(synchronize signals).
and after it i will need to reading voltage.
i can make two signals synchronize together.
i can make reading voltage
but i can't make two signals synchronize together with reading voltage
it throw to me this error message.
i am looking for away to figer this out.
thank's for any help
eyal
Attachments:
test11.vi ‏130 KB

Telnet two devices at the same time 1 C# program

Hi, currently I have one 100% working program used to telnet my Arduino circuit.
I use this C# class found somewhere around the web: Anyway, without this forum, I wouldn't be able to finish my program.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Net.Sockets;
namespace USSR
enum Verbs
WILL = 251,
WONT = 252,
DO = 253,
DONT = 254,
IAC = 255
enum Options
SGA = 3
class TelnetConnection
TcpClient tcpSocket;
int TimeOutMs = 100;
public TelnetConnection(string Hostname, int Port)
tcpSocket = new TcpClient(Hostname, Port);
public string Login(string Username, string Password, int LoginTimeOutMs)
int oldTimeOutMs = TimeOutMs;
TimeOutMs = LoginTimeOutMs;
string s = Read();
if (!s.TrimEnd().EndsWith(":"))
throw new Exception("Failed to connect : no login prompt");
WriteLine(Username);
s += Read();
if (!s.TrimEnd().EndsWith(":"))
throw new Exception("Failed to connect : no password prompt");
WriteLine(Password);
s += Read();
TimeOutMs = oldTimeOutMs;
return s;
public void WriteLine(string cmd)
Write(cmd + "\n");
public void Write(string cmd)
if (!tcpSocket.Connected) return;
byte[] buf = System.Text.ASCIIEncoding.ASCII.GetBytes(cmd.Replace("\0xFF", "\0xFF\0xFF"));
tcpSocket.GetStream().Write(buf, 0, buf.Length);
public string Read()
if (!tcpSocket.Connected) return null;
StringBuilder sb = new StringBuilder();
do
ParseTelnet(sb);
System.Threading.Thread.Sleep(TimeOutMs);
} while (tcpSocket.Available > 0);
return sb.ToString();
public bool IsConnected
get { return tcpSocket.Connected; }
void ParseTelnet(StringBuilder sb)
while (tcpSocket.Available > 0)
int input = tcpSocket.GetStream().ReadByte();
switch (input)
case -1:
break;
case (int)Verbs.IAC:
// interpret as command
int inputverb = tcpSocket.GetStream().ReadByte();
if (inputverb == -1) break;
switch (inputverb)
case (int)Verbs.IAC:
//literal IAC = 255 escaped, so append char 255 to string
sb.Append(inputverb);
break;
case (int)Verbs.DO:
case (int)Verbs.DONT:
case (int)Verbs.WILL:
case (int)Verbs.WONT:
// reply to all commands with "WONT", unless it is SGA (suppres go ahead)
int inputoption = tcpSocket.GetStream().ReadByte();
if (inputoption == -1) break;
tcpSocket.GetStream().WriteByte((byte)Verbs.IAC);
if (inputoption == (int)Options.SGA)
tcpSocket.GetStream().WriteByte(inputverb == (int)Verbs.DO ? (byte)Verbs.WILL : (byte)Verbs.DO);
else
tcpSocket.GetStream().WriteByte(inputverb == (int)Verbs.DO ? (byte)Verbs.WONT : (byte)Verbs.DONT);
tcpSocket.GetStream().WriteByte((byte)inputoption);
break;
default:
break;
break;
default:
sb.Append((char)input);
break;
My UI Code:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.IO;
using System.Linq;
using System.Net;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Net.Sockets;
namespace USSR
public partial class mainForm : Form
TelnetConnection tc;
public bool keyPressChecker = false;
public bool connectedChecker = false;
public mainForm()
InitializeComponent();
// webBrowser1.Navigate("http://admin:[email protected]");
this.tc = null;
this.connectedChecker = false;
private void radioButton2_CheckedChanged(object sender, EventArgs e)
try
if (submarineRadioBtn.Checked)
System.Diagnostics.Process.Start("dummySub.exe");
catch (Exception ex)
MessageBox.Show(ex.ToString());
private void centerBtnCamera_Click(object sender, EventArgs e)
private void forwardBtn_Click(object sender, EventArgs e)
if (connectedChecker)
this.tc.WriteLine("W");
private void connectToolStripMenuItem1_Click(object sender, EventArgs e)
try
//create a new telnet connection
tc = new TelnetConnection("192.168.0.102", 23);
if (tc.IsConnected)
connectedChecker = true;
catch (Exception ex)
MessageBox.Show(ex.ToString());
private void controlKeyDownCheckBox_CheckedChanged(object sender, EventArgs e)
if (controlKeyDownCheckBox.Checked == true)
keyPressChecker = true;
else
keyPressChecker = false;
private void controlKeyDownCheckBox_KeyDown(object sender, KeyEventArgs e)
if (keyPressChecker == true)
if (e.KeyCode == Keys.W)
if (connectedChecker)
tc.WriteLine("W");
if (e.KeyCode == Keys.S)
if (connectedChecker)
tc.WriteLine("S");
private void reverseBtn_Click(object sender, EventArgs e)
if (connectedChecker)
tc.WriteLine("S");
private void disconnectToolStripMenuItem_Click(object sender, EventArgs e)
try
tc = null;
connectedChecker = false;
catch (Exception ex)
MessageBox.Show(ex.ToString());
private void controlKeyDownCheckBox_KeyUp(object sender, KeyEventArgs e)
if (keyPressChecker == true)
if (e.KeyCode == Keys.W)
if (connectedChecker)
tc.WriteLine("O"); //decrease to MID PT.
if (e.KeyCode == Keys.S)
if (connectedChecker)
tc.WriteLine("P"); //decrease speed to MID PT.
private void exitToolStripMenuItem_Click(object sender, EventArgs e)
Application.Exit();
Now, what I want to know is this: IS IT POSSIBLE FOR MY C# PROGRAM TO TELNET TWO DEVICES AT THE SAME TIME?
Thanks
Glenn

try this links :
http://www.codeproject.com/Articles/19071/Quick-tool-A-minimalistic-Telnet-library
http://stackoverflow.com/questions/25116077/send-and-receive-commands-via-telnet-in-c-sharp
http://stackoverflow.com/questions/12283241/ssh-to-server-then-telnet-to-device

Is there a way to show two angles at the same time in the final edit rather than switch between them with Multicam?

Can I show two angles at the same time in the final edit rather than alternate with Multicam?

Stack two clips on top of each other and reduce the sizes. I think that's what you want.

One again, "can I use CC on two computers at the same time?" - in practice.

I know this has been asked before and all those threads are locked. Many asked the question, but I haven't found a satisfying answer yet.
Can I multi task with CC?
I want to have my laptop next to my desktop. And while I render, export or whatever my newly shot documentary on the laptop I want to work with a music video project on my desktop. Then when the render is finished I render the music video and go back to the laptop and continue on the documentary. Or maybe I just work 5 minutes on the desktop music video, then come up with something brilliant for the project on the laptop and switch. Back and forth. Will that kind of activity result in any kind of limitation, usage-wise?
So, working on Premiere on my two computers at the same time.. is it possible? Technically? I know the EULA says "only one person". But will it let one person mutli task?
I need to know this before I buy. sorry for asking this again, please bless me with a clear answer

Hi Jimmy Crim,
Yes in case of Creative cloud subscription you are allowed to install and use the cc apps in any two machines.
Even if you want you care allowed to use these apps together in both the machines.
Thanks
Kapil

Can I access two websites at the same time?

Does Dreamweaver have the ability to open two websites at the same time?
I basically have a CMS hosted on one server, that connects to my clients sites on other servers. I want to be able to open files on one server and edit them and also edit files on another server at the same time.
If this isn't available in Dreamweaver, then I think it should be. I often need to copy code from one page in a site to another page in different site. To have the ability to have two windows open, each connected to a different website server would be invaluable to me. By having separate windows, each can have its own server connection. I don't know how easy that would be, but I'd love it!
Cheers
Glynn

You can only connect to one site at a time. And you need to edit files locally, save & then upload to the remote server. AFAIK, no single FTP app is capable of connecting to more than one server at a time. You might be able to do what you want with DW open and an additional 3rd party FTP client like Filezilla, each connecting to different servers.
Nancy O.

How can I open two libraries at the same time on itunes?

Hey i need help on opening two libraries at the same time on itunes. I don't know if that is possible but need some advice if its possible. I already have several libaries but I need to compare labaries at times due to various users on my computer. Please help .

Not that I'm aware of. What exactly is that you want to achieve? There are tools for scanning media folders and adding any files not listed in the library, or deleting those that no longer exist. There are also ways to use one library for multiple users so that any tag update gets applied for everyone.
tt2

How can I start two Vi at the same time?

I have two Vi's, each of these Vi has a stop button. I want to start these two Vis at the same time. I also want to be able to stop the two Vis at the same time. What should I do? Thanks.

One way to start them is with an Invoke Node and the Run method. You can then stop them with the Set Control Value [Variant] method. When you use the Set Control Value [Variant], you just have to specify the name of the front panel control that stops the while loop. Older versions of LabVIEW only had the Set Control Value method in which you had to use the flatten to string function to pass the Type Descriptor and Flattened Data.
Message Edited by Dennis Knutson on 03-20-200609:35 AM
Attachments:
Run Method.JPG ‏44 KB

How to make this two things at the same time ?

Hello
When my mouse is on a area, I need :
- to show a object (a rectangle inserted with the toolbar)
- to show a caption
I think it's not possible to do this two things at the same time when I use the rollover functions (Rollover caption or Rollover Image).
I would like to use a button, but the button works only if I click it, and not when I just pass my mouse on it.
Someone have an Idea?
I can't use Javascript.
Thanks

Rick is correct. You can use the Rollover Slidelet's rollover area to trigger an Advanced Action. You'll need to create this Advanced Action with two clauses. One to SHOW the caption, and the other to SHOW the rectangle.
Your alternative to the rollover slidelet is to use an Event Handler widget attached to the object that the mouse should roll over.
The Event Handler will detect when the mouse is over the object and trigger its own Success criteria. You can then use the widget's ON Success event to trigger the Advanced Action as mentioned above.
More information about using the Event Handler here: http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
An example of using it to do two different things on the same object can be found at this web page: http://www.infosemantics.com.au/adobe-captivate-advanced-elearning-tutorials/beat-adobe-ca ptivate-interactive-catch22
Trial versions of the widget can be downloaded from here: http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets

Any way to play two clips at the same time one over the other? (transprent)

Any way to play two clips at the same time one over the other? (transprent)

Yes.
See the information here for a variety of ways to do this:
http://discussions.apple.com/thread.jspa?threadID=933500&tstart=50
http://discussions.apple.com/thread.jspa?threadID=903151&tstart=0
http://karsten.schluter.googlepages.com/jackiechancredit
http://www.geethree.com/slick/V_04.html

If I have two appointments at the same time, they overlap in the iOS 7 calendar rather then appearing side-by-side so that I can't read one of them due to the identical colors of the two appointments. Is there any way to fix this with a setting?

If I have two appointments at the same time, they overlap in the iOS 7 calendar rather than appearing side-by-side in the daily view, so that I can' read both of them due to the same background color. Is there a way to change this via a settings change?

I fyou have "all day" event that are taking up the entire day, check the event. All day event only appear at the top of the time line (and just below the week view). I suspect they are not actually set up as all day, but have specific time frames assigned.
In teh screen shot below, "Sample" is an all day event; NFL: CAR@SF is not.

Re: if weblogic can serve two ports at the same time?

That's not true. WebLogic supports a non-secure and secure listener port at the
same time. That was one of the selling points for my organization.
Michael Girdley wrote:
If, you mean the same port on two different IP addresses, then the answer is
yes.
If, you mean two different ports on the same IP address, then the answer is
no.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
fxy <[email protected]> wrote in message
news:8fdk99$t9$[email protected]..
<URGENT QUESTION>
I'd like to know if weblogic can support two ports at the same time.
thank you in advance.
<URGENT QUESTION>

Well, the question was really meant to see if any change was made to WL to support
this, not because I didn't believe Michael Girdley.
P.S., this is something Websphere 4.0 let's you do...In case this encourages someone
to add this support.
"Mike Reiche" <[email protected]> wrote:
>
If you don't believe Michael Girdley, then I don't know why you would
believe anyone
else. I believe the answer is still 'no'.
Why do they 'have to be on different ports'? We block requests by URI
- so just
block all requests to /youradminapp/* at the firewall. Or you can block
them at
your Web Server. Or restrict them by user in WL.
Mike
you"Anil Arora" <[email protected]> wrote:
Is it still true that WL 6.0 cannot host multiple (non-secure) HTTPports
on one
server? We need this capability within one JVM to allow one web application
to
be accessed from one port while another through a second port. Forexample,
we
have a application to be exposed through the firewall at port 7001.
Then we have
another admin application to only be accessed within the firewall. But
they need
to be deployed within the same JVM since they may have shared statebetween
them.
Thanks,
Anil
"Michael Girdley" <[email protected]> wrote:
I'm sorry, to clarify my statement: I was speaking about nonsecure
communications. Weblogic can only support one listener port at a time.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Allen Akers <[email protected]> wrote in message
news:[email protected]...
That's not true. WebLogic supports a non-secure and secure listenerport
at the
same time. That was one of the selling points for my organization.
Michael Girdley wrote:
If, you mean the same port on two different IP addresses, then
the
answer is
yes.
If, you mean two different ports on the same IP address, then theanswer
is
no.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
fxy <[email protected]> wrote in message
news:[email protected]...
<URGENT QUESTION>
I'd like to know if weblogic can support two ports at the same
time.
thank you in advance.
<URGENT QUESTION>

Give commands to two keithley2400 at the same time

Similar Messages

Maybe you are looking for