Give MacBook iSight priority over LED Cinema Display iSight?

Hi all,
I have a new MacBook purchased in January 2010, which I hook up to a new Apple LED Cinema Display purchased a couple of weeks ago. Both the MacBook and display have iSight cameras built in.
I seem to be able to have both cameras working independently of each other within iChat and Photo Booth, but when I try and use a webcam on a website chatroom, no matter what I try, the camera in the display takes priority over the MacBook. I want the display camera to be disabled, and for the MacBook camera to work instead.
I have tried setting up the displays both as mirrored and extended, and tried moving the menu bar from display to MacBook and vice versa, but as soon as I enter a chatroom, the display camera is used.
I have tried altering the Flash settings in the chatrooms, but because both cameras are integrated and so have the same input settings, that doesn't work.
I have a feeling I am trying to achieve the impossible, but any thoughts would be appreciated.
Thanks in advance,
Jonathan
Message was edited by: Jonathan_R

Hi,
An Interesting one.
I am not sure there are any setting on the Mac to change this.
System Profiler is not "Dragable" to re-order the USB list.
Although it may be possible to use Terminal to re-order any list or priority that would be beyond my knowledge.
I would tend to go for the work around of using Photo Booth or iChat to make the unwanted camera Busy.
8:18 PM Monday; April 12, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Similar Messages

Macbook Air, Firewire and LED Cinema display

Hello,
I want to connect my Saffire Pro 40 (firewire) to my Macbook Air (thunderbolt), but i am unsure
what to do.
I could connect the newly released firewire thunderbolt adapter to the macbook air, but then i
wouldn't be able to connect my LED Cinema Display as the only is one Mini-display port.
Anyone has any tips?
Best regards...Jan

No cheap solution here. The Thunderbolt Display is what you need.
The Matrox DS1 Thunderbolt docking station is missing the Firewire Port.

New MacBook Pro & 27" Apple LED Cinema Display Don't Go to Sleep

I recently purchased a new 13" MacBook Pro (MacBookPro8,1) and a 27" Apple LED Cinema Display. When they are connected the computer occasionally has a problem being put to sleep. When clicking sleep, the monitor will take a little while to shut off, but in about 10 seconds, it will turn back on. Immediately when turning on, the image on the screen is quite scrambled (it does correct itself). Usually, if I attempt to put it to sleep multiple times, it will end up working. When it does go to sleep (correctly), the screen will turn off much faster than the times where it doesn't sleep.
Anyone else have a similar issue they found a fix to? When speaking to Apple support, they thought it was part of an issue with 10.6.6, however, the update to 10.6.7 did not solve the issue.
PS - I keep my MacBook Pro lid closed when using the display.

Is your 2.6 the CTO upgrade from the high end 2.3 15"?
Yes, both will work under OSX and Windows. One note, when you boot Windows, you need to unplug the USB from the LED Cinema display or Windows will not boot. Once booted, then plug the USB back in to regain brightness, etc controls.

MacBook Pro, 27 inch LED Cinema Display and OSX 10.7

I do have a MacBook Pro and 27 inch Cinema Display. To improve the wireless connection I have to open the macbook. Doing so whilst running OSX 10.7 my Cinema Display changes autimaticaly to the settings of the MacBook display.
With OSX 10.6 this was OK.
Is this a bug or does anybody know how to overcome the change in display whilst opening the MacBook ?

Having the exact same issue, same set of circumstances.

LED cinema display + Mac Pro + Boot camp = build in iSight not working

Hallo,
I hope that anybody has the same situation. I bought a Mac Pro and the LED cinema display. Installed boot camp and windows vista. Now I recognized that the iSight camera build in the LED cinema display is not always working. Mostly not. Sometimes the iSight is recognised but as written mostly not . May be the USB is out of specification. I want to give the display back and buy a new one. Before i go this way I want to be sure that normally this configuration is working. Could anybody please confirm this?
Thank you, Frank

frankiko wrote:
Thank you for your quick response.
You're welcome, frankiko
Is it true that in your opinion it should work?
No.
I will try your suggestions ... send back the LED cinema display... it seems to be working with MacOS.
Your new information is helpful. Because your system, including iSight, consistently work properly when running Mac OS X, your LED cinema display, iSight, Mac, and Mac OS X, are obviously working properly.
Although I do not use Windows®, the problem you describe must be with your Windows® installation and/or configuration. Therefore, returning the display will not resolve your problem unless you plan to use some different camera that you know works with your Windows® installation.
Before you return your LED display, you may wish to consider any of the following that may be relevant to the system you are using:
(1) If you use Mac OS X 10.5 Boot Camp with Vista: http://support.apple.com/kb/TS1606
(2) If you use Mac OS X 10.6 Boot Camp with Vista: http://support.apple.com/kb/HT3777
(3) If it is an option in your version of Boot Camp, have you tried repairing the Boot Camp drivers? See your Boot Camp Installation Guide for help on how to repair the drivers and reinstall a specific driver if necessary.
(4) If you have not already seen this, you may find other help in Apple's Boot Camp Support page.
(5) After you have any possible Boot Camp issues resolved, and especially if you are having any other problems with Vista, check to be certain that Vista was installed and configured properly.
(6) If you get no better suggestions here, the last answers in both the Boot Camp 2.0, Mac OS X 10.5: Frequently asked questions and the Boot Camp 3.0, Mac OS X 10.6: Frequently asked questions tell you that you can get phone-based assistance or online support for Boot Camp from Apple.
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.8) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Apple LED Cinema Display -- USB Port + iSight Camera not working

I see an unusual problem with my brand new LED Cinema display. When i put my Macbook pro in sleep mode it deactivate all the USB ports and isight camera in LED Cinema Display. When I turn the computer back on I cannot use USB or iSight camera. I tried below solutions -
- Restarting the Macbook pro and LED cinema
- Completely draining the power in both LED Cinema and Mackbook pro.
- Resetting Macbook pro.
- Upgrading LED Cinema to latest and greatest firmware ( firmware update 1.0)
Did anyone encounter this problem ? If yes please post your thoughts or any solutions.

After numerous attempts of powering down/resetting the macbook pro and led cinema i was able to make the USB ports work. However I was able to successfully reproduce the problem once again by putting the mackbook on sleep mode.
I finally ended up shipping my led cinema back to apple for a replacement. I will try the test case with the new one when it arrives.

27 LED Cinema Display Audio and Brightness when powering MacBook Pro

When my 27 LED Cinema Display is powering my (or another) 2009 13" MacBook Pro, I have experienced three issues:
1. The dropped audio problem other users have mentioned. Shutdown, then disconnect power/usb/displayport, then wait ~15s, then reconnect and reboot temporarily fixes the problem.
2. I also have the sluggish keyboard behavior when adjusting the volume that others have mentioned.
3. I have experienced shifts in display brightness which are obvious when the display is dimmed. I have disabled the ambient light sensor as well as any interfering power management or energy saver settings. Opening apps, scrolling and other normal activities seem to aggravate this behavior.
This last strange behavior inspired me to try using a power adapter for the MacBook Pro instead of display's laptop power connector. *Doing so seems to have resolved all three issues.*
It seems that this may indicate an underlying problem with the display's power supply. Can anyone confirm?

mmayo wrote:
I am having the same issues & with a 1 day old display. I am using a 15" MBP. The screen is killing me when it dims down when no lights are on. I didn't notice the issue when the screen is brighter with the lights on. Anyone know if this is a hardware or software issue? I'd like to utilize the ambient light sensor but not if its going to make my screen flicker when it is dim....
(1) I have never had any deaths associated with my screen, but on rare occasions my display's brightness will flicker when I manually adjust the brightness. The fix I have found for this is to increase the brightness one more setting or decrease it one more setting. Changing the screen from full dim to full bright and then setting the brightness I want sometimes helps, too.
(2) You can check whether this software update has been applied to your 27-inch:
http://support.apple.com/kb/HT4293
(3) Your Apple Service Provider could tell you whether your problem is related to hardware or software.
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

How can i connect my MacBook pro to my 24" cinema display and my led tv?

I sãs wondering if there is a way of connect my MacBook pro to my 24" cinema display trough mini displayport and my led tv trough the hdmi input. I know that is a lot of addapters but i never saw something that allows me to do it.
Thanks for any help

You can get a Matrox DualHead2Go:
http://www.matrox.com/graphics/en/products/gxm/dh2go/
There is also one for 3 monitors if you fancy that too...
and http://www.monoprice.com sells all kinds of cable adapters for your displays

Can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?, can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?

I whanted to use my macbook pro in a larger deskop ,so if can somebody answer can i use my Macboook pro 13 inch, its a Minidisplay cable its not thunder bolt ,can i use it to a new apple led cinema display? Thank you!

Never mind, I solved it. Didn't know the converter needed a power source to operate (duh!) Now I have that, it works just fine.......

Macbook pro screen blinks after connecting it to LED Cinema Display

Hello, just bought a 27 LED Cinema Display to connect my macbook pro 17 (early 2009).
Everything fine until today. After disconnecting my laptop to the display the screen of laptop blinks.
Never had this problem.
I would appreciate any help.
Thanks
Ignacio

...but I need to be sure that my macbook will not stop working if I leave the problem with the screen blinks.
Of course you do — we all need to be sure our machines will keep working properly. Unfortunately, there's never any certainty about that, even if one's machine is working perfectly right now. But if it's any consolation, I've seen nothing posted in these forums to indicate that the blinks commonly foreshadow anything worse, so I think you can be reasonably confident that your machine isn't at the start of a predictable course of deterioration.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Macbook Pro to LED Cinema Display

I just received a LED Cinema Display for Christmas, however my macbook pro doesn't have a mini display port which cable would i need to by as an adapter to attach my macbook prop to the mini display port cable.

Unfortunately, it's an expensive converter box that you need. There's at least two on the market that I am aware of.
http://www.atlona.com/Atlona-DVI-to-Mini-DisplayPort-Converter-p-17859.html
http://www.gefen.com/kvm/dproduct.jsp?prod_id=8913

24" LED Cinema Display with my MacBook (2008)

I would be so grateful for some assistance and advice ....
Today I received my new 24" LED Cinema Display ... unfortunately, it did not come with any written instructions or directions. I tried to hook it up to my MacBook using the USB connection, but this did nothing to power up the monitor.
I called Apple Support, who advised me that I needed an adapter for a "mini display port" and a "mini dvi". But when I went to the Apple store, I was told that no such adapter existed. The guy at the Apple store said that the new monitors are not compatible with my Macbook ....... but how can this be, when the Cinema Display system requirements list "MacBook" ......?
Is this really true, that I have no recourse? Please someone help me if you can. It would break my heart to pack up this beautiful monitor and send it away.

Click here for a converter. The USB and FireWire ports on the display are there so the display can act as a hub; neither video nor sufficient power is transferred through them.
(47706)

Select Default iSight Cam with Dual LED Cinema Displays

Hello
I have two 27in LED Cinema Displays, both of which have iSight Cameras. When I try to facetime, by default, the right monitor camera turns on, but I want to use the left camera.
How do I select which camera on which monitor I want to use? Both monitors are connected via thunderbolt. I'm using OS X Mavericks.
Thanks!

You can try the old trick of first launching a camera app that you do NOT want to use - QuickTimeX > New Movie Recording perhaps - to have it engage the ONE display iSight camera. After you can see that your camera is engaged with the unwanted app, you can hide that app if desired. Then launch FaceTime and see if the other connected camera is accessible to FaceTime.
If FaceTime cannot then recognize the second Display iSight, check your System Information utility to see if your Hardware > USB > USB Device Tree recognizes both Display iSights. If the device tree recognizes only one Display iSight, your lowest cost workaround may be to connect a Mac-compatible webcam to one of your available USB ports so it is recognizable . The external camera may then be selectable in your FaceTime menu without the two-application trick.
Message was edited by: EZ Jim
Mac OSX 10.10.2

I have a macbook connected to LED cinema display. The display started to flicker. The display turns black for a second or two. Sometimes I restart macbook and display. Sometimes it helps.

I have a macbook connected to LED cinema display. The display started to flicker. The display turns black for a second or two. Sometimes I restart macbook and display. Sometimes it helps.

same issue, either your wiring or display itself is going bad. for me, it was the display but luckily still under warranty

Give MacBook iSight priority over LED Cinema Display iSight?

Similar Messages

Maybe you are looking for