Give me the steps to get output given below PModule

report is related to PM module
3.3     Selection Criteria
Field Name     Table Field / Check Box / Radio Button     Select-Option(S)   or
Parameters(P)     Comments
(Range, Single /Multiple Selections, Patterns, Mandatory, Match Code, etc.)     Default Value
IWERK     Plant     Mandatory     Single     
STORT     Location           Single/Multiple     
EQUNR     Equipment     Mandatory     Single/Multiple     
QMGRP     PM Coding          Single/Multiple     
QMCOD     Code          Single/Multiple     
OTKAT     Object Part code          Single/Multiple     
OTGRP     Code          Single/Multiple     
FEGRP     Damage          Single/Multiple     
FECOD     Code          Single/Multiple     
AUSVN - AUSBS     From – To date     Mandatory     Single/Multiple     
Output Layout
7.     Detailed report should comprise of the following,
Date wise, Shift wise, Machine number wise, MTBF/MTTR & its details as listed in point no: 5, and the other details such as, stoppage sessions with date and time, duration of stoppage, reason for stoppage, with the codes such as, equipment part, failure, cause, and action taken etc.

Does not look like a performance problem to me.
Seems that your looking for somebody to do your work.

Similar Messages

  • Can someone tell me the steps to get rid of the Yahoo toolbar. I have gmail and the right homepage , and when I updatede Firefox I said I didn't want the Yahoo toolbar, but it is there anyway and I don't know how to get rid of it.

    I just want to get rid of the **** Yahoo toolbar! If not, I want to go back to the previous version of Firefox. Can someone help me with the steps to do either one of these, Please!!!

    I just figured out how to remove it. Go to the Tools menu and select add-ons. Click on extensions, locate Yahoo Toolbar in the list, and off to the right, you can click on "Disable" or "Remove." I disabled, restarted Firefox 4.0, and bingo, no annoying Yahoo toolbar. Hope this helps!

  • Can anyone give me the steps for moving the repository databases in 9.3.0?

    We are in the 9.3.0 environment and I need to move the four repository databases for essbase, biplus and webanalysis/workspace to a new machine. I tested moving the databases and rerunning the config util, but I lost my sample reports I created earlier. Does anyone have a step by step procedure for moving the repositories?
    Thanks,
    -C.

    If you are moving reports why don't you bulk export them from workspace and then import them into your target.
    Are you talking about migrating the repository across different shared services environments, if so then I doubt you will have much luck with trying to migrate the workspace repository as it pretty tied in with shared services.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • On an iPhone 4s version 5.1.1 it is full with music and I cannot take an update.  what are the steps to get rid of the music which is backed up to the cloud.

    My phone is full of music and I do not have enough space to take the update.  I have the photos and music on the cloud. What steps do i need to take to free up space on my phone so I can take the update?

    You can use iTunes to sync all the music off your phone by unchecking "Sync Music" on the Music tab of your iTunes sync settings, then clicking Apply at the bottom to sync your phone.  After updating, sync your music back to your phone.

  • How it is possible to bar graph. please give me the steps

    Hi ,
    Simple Bar Graph - Show the Actual as a bar on a monthly frequency,Target can be shown as a line.If the bar height exceeds that of the line, please show the bar in red; if it is lower than the line, please color it in green

    Use a stacked bar line combo. Create one column which only give a result if value < line value, create one column which only gives result if value >= line value.Put them in stacked bar.
    regards
    John
    http://www.obiee101.blogspot.com/

  • HT201406 I've done the steps to get on my ipod again because the screen is not working so I held the power and home button until the apple logo appeared but it still wont work I have tried twice now and I still cant get on

    I have no idea what to do will someone help me please?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I have all my videos being blocked and when I go through all the steps and get to my name and password.  when I put in my name its ok but when I try every password that I know it bounces it.  I then changed my password and it still bounces it.  How can I

    I can not open my popups videos It won't let me open them says my password doesn't work so I changed my password and it still bounces it.  How do I open them or get out all together?  Tim [email protected]

    I have no idea what you are asking.  What are "popups videos"?  How does Adobe Reader come into this?
    Please tell us exactly what you are trying to do, as well as your operating system & other relevant details.

  • I am unable to connect to IPP host. Would someone tell me the steps to get this to happen for me?

    I am unable to connect to IPP host, and therefore cannot print

    fyi:
    IPP (Internet printing protocol)
    IPP is a relatively new (1999) protocol  based on the HTTP protocol. With IPP, more job-related data is transmitted than in the other protocols.       CUPS uses IPP for internal data transmission. This is the preferred protocol for a forwarding queue between two CUPS servers.  The name of the print queue is necessary to configure IPP correctly.
    The port number for IPP is 631.     
    http://www-uxsup.csx.cam.ac.uk/pub/doc/suse/suse9.2/suselinux-adminguide_en/ch12 s04.html
    This thread, suggest by the new forum software! has some interesting info:
    https://discussions.apple.com/message/13100324#13100324

  • TS1702 I did all of the steps to get apps to work and they shut down right away still

    I tried a reset, uninstalling and reinstalling app, installing a new app and my app still kick back to the start page right away.  So frustrating, any ideas?

    You must have gone to the old microsoft post.
    Here is the link:
    http://support.microsoft.com/kb/2438651

  • I can't save multple pictures, but I can save them one at a time with "save as" the error I get is listed below.

    Could not save a copy as “IMG_2477.jpg” because the file is locked or you do not have the necessary access privileges. Use the ‘Get Info’ command in the Finder to unlock the file or change permissions on the file or enclosing folders.
    I have checked the get info for the files in question and they are not blocked. I can save them one at a time under the save as menu option but can not batch save them under the save multple files menu option. Can someone please help me with this?

    I did get rid of a few after I set the iphone to not show music which was in the cloud but I still have 2 albums that won't go away.  Any more suggestions?  Thanks for your help.

  • How to covert from the following string to dateformat given below

    String stodate = "Tue Mar 22 09:13:36 CET 2005";
    Date d = new Date();          
    java.text.SimpleDateFormat sdf = new java.text.SimpleDateFormat("yyyy-mm-dd hh:mm:ss");
      try
         d = sdf.parse(stodate);          
        System.out.println(d.toString());
       catch(ParseException e)
         System.out.println("Unable to parse: " + stodate);
      }I've got ParseException. How to solve the problem

    Didn't you ask this question only a couple of minutes ago?
    http://forum.java.sun.com/thread.jspa?threadID=609178

  • Why does adding a PostUserMessage cause the call to the TestReport Callback step "Call Get Report Body" to be skipped ?

    I am trying to add steps to my process model to send progress messages to my user interface. When I add these steps (Automation Call -PostUIMessage) I receive the message and can update the UI accordingly. However, then the step "Call Get Report Body" (in the TestReport callback) will not execute (it is reported as "skipped" in the Execution Flow column) and the report generated doesn't contain the test step result information. My guess is that the step isn’t executing because the precondition is evaluating to False. Any thoughts as to why the step doesn’t execute ?

    When you add steps to your process model, make sure that results collection is turned off for the steps. Edit the step properties, select the "run options" tab, and make sure that "Record Results" is not checked.

  • What are the steps to send sales order custom field from CRM to ECC

    Hi Xperts,
      We have created a custom field in sales order [ VBAK] and successfully replicate its value from ECC to CRM. But while doing the enhancement to replicate the field value from CRM to ECC [ When the SO is created in CRM ] we are not able to do so.
    We used a FM in CRM0_300, but while replicating the SO from CRM to R/3 it is not getting called.
    Please help us by providing the steps to do the full enhancement to replicate the custom field of SO from CRM to ECC.
    Thanks in Advance.

    Hi Anjaneyulu,
    We are faced with a similar situation as you.
    Here is our scenario with the steps that we performed so far:
    1.  We have added a few custom fields in CRM 7.0 (Ehp1) using AET.
         The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
    2.  On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
    3. Extended BAPI structures BAPISDITM and BAPISDITMX in both CRM and R/3 Side.
    4. As mentioned in the note 1053817, we have implemented BADI CRM_DATAEXCHG_BADI -> Method CRM_DATAEXCH_AFTER_BAPI_FILL in CRM (mapped fields from BDOC to BAPI structures)
    5. In the above note, for R/3 BAPI to R/3 API they have given to implement user exit USEREXIT_MOVE_FIELD_TO_VBAP which we found in MV45AFZZ. But in this we are unable to find BAPI Structure to map.
    Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
    In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
    Could you let us know if your issue is solved completely. Are you able to see the value of custom field, in ECC? Did you use AET to add fields in CRM.
    Could you please give us the steps that you have done.

  • Currently running OSX 10.6.8 and Safari 5.1.10. What are the steps to update my IMAC?

    I'm currently running OSX 10.6.8 and Safari 5.1.10. What are the steps to get my IMAC totally up-to-date?

    Back up your data, check your applications for compatibility, and download Yosemite from the Mac App Store.
    (116042)

  • What r the steps involved in validation ?

    Hi All,
    Can u give me the steps to be performed in maintaining validations in FI
    which r the tcodes used and what r maintained in it.
    what r the steps to be performed by the abaper.
    its urgent
    helpful answers are rewarded
    thanks everyone

    yes ,i've registered in rggbr000 by cpoying this to zrggbr000
      exits-name  = 'U900'.                  "single validation: only one
      exits-param = c_exit_param_none.        "data record used
      exits-title = text-102.                 "Example EIS
      APPEND exits.
    also i've coded
    form U900
    endform.
    in the same  zrggbr000
    after that how this form is called during the runtime.
    thats what the problem is

Maybe you are looking for