Give navigation to find ACKNOWLEDGEMENT ERROR in XI

give navigation to find ACKNOWLEDGEMENT ERROR in XI after resheduling the messages
send as early as possible.

Hi ,
are you able to send Idoc to XI sucessfully.
if you don't want ACK back from XI. go to transaction NOALE and mark the message type as ACK not req.
if you want the ACK back need to configure the ALE AUDIT IDoc back to R3 from XI.

Similar Messages

I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about t

Sorry didn't know that the first step was just supposed to be "subject".
So here it is again.
"I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about this stuff so please don't answer with "maybe this willl work, or maybe that." I need a real answer please and I cannot find a way to actually contact Adobe. I also don't have a disk drive on this Mac. Thanks"
Also please feel free to e-mail the answer because I hate looking for these answers online. It takes me forever to find this section. Not that I have even even gotten a real answer.
[email protected]

Hi Sonia,
While transferring Adobe from laptop to PC the licensing files got corrupt and the right way to use Adobe Applications is to install first as transferring from a different machine can give you problems.
You can try steps from this article if that helps otherwise you have to reinstall and manually delete some files , everything is mentioned.
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
You can download CS4 from here:
Download CS4 products

How can I open my file after 'cannot find -filename-' error message?

OK, the bottom line is, InDesign crashes and I cannot recover my file. I get a 'Cannot find file' error message when I try to open the file.
I am using CS6 on a MacBookAir, OS X Yosemite.
I have tried finding the 'InDesignFileRecovery' folder, I cannot find it anywhere, it's not in my Library or Caches folder.
However, I do work in dropbox, so I just headed over to dropbox to recover from their 'previous versions'. It starts to get weird. There are lots of previous versions (I save very regularly) but when I download a previous version (that I know was fine) it downloads with a indd.txt extension. So I remove the txt extension and keep the indd and everything looks fine, but then that recovered file gives the same message. I tried renaming the recovered file and opening that, same 'cannot find file' error message.
I can open InDesign and open the file from the day before, but none of the dropbox earlier versions of that day's work. I am SO sick of this happening. It happened to me last week to, so far I have lost 20 hours work :-(
I have tried quitting InDesign and restarting the Mac, doesn't help. The only thing I can think of is to 'save as' every couple of hours, at least then hopefully I only lose 2 hours work.

Thanks, when you say 'hidden by default' then how does one find it? I have already tried the path you mention and there is no sign of a cache folder with Adobe files. Spotlight doesn't reveal anything either.

Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help-

Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…

Many thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Jdbc scenario .. where to find the error msg

Hi,
I am working on a scenario,
abap proxy->jdbc adapter->MsSql server.
Whle testing,
i sent the payload xml from the sproxy test sceen.
After that, i checked the "Monitor for processed xml messages" screen (SXI_MONITOR).
There it shows the status "Processed successfully" for the message that i sent.
But when i checked the sqlserver database, the record is not inserted.
Where can i find, if anything gone wrong at Jdbc adapter, or there after.
Thanks in advance,
Ganesh

Hi
apart from this communication channel you can see the message in adapter engine
to do this take the id of the message fromSXI_MONITOR
then go to transaction sxmb_ifr
inside this go to message Monitoring
under drop down select adapter engine and inside the window give the iD of your message which you have taken from MONI
if you are not getting the filter for message ID then click on additional filter and give the iD
after this you can see your message
select the radio butten inside your message and click on details
here you will get the log of each and every step which have been followed in processing the message and you can find the error exactly
regards
sandeep
If helpful reward points

Need help with class info and cannot find symbol error.

I having problems with a cannot find symbol error. I cant seem to figure it out.
I have about 12 of them in a program I am trying to do. I was wondering if anyone could help me out?
Here is some code I am working on:
// This will test the invoice class application.
// This program involves a hardware store's invoice.
//import java.util.*;
public class InvoiceTest
     public static void main( String args[] )
     Invoice invoice1 = new Invoice( "1234", "Hammer", 2, 14.95 );
// display invoice1
     System.out.println("Original invoice information" );
     System.out.println("Part number: ", invoice1.getPartNumber() );
     System.out.println("Description: ", invoice1.getPartDescription() );
     System.out.println("Quantity: ", invoice1.getQuantity() );
     System.out.println("Price: ", invoice1.getPricePerItem() );
     System.out.println("Invoice amount: ", invoice1.getInvoiceAmount() );
// change invoice1's data
     invoice1.setPartNumber( "001234" );
     invoice1.setPartDescription( "Yellow Hammer" );
     invoice1.setQuantity( 3 );
     invoice1.setPricePerItem( 19.49 );
// display invoice1 with new data
     System.out.println("Updated invoice information" );
     System.out.println("Part number: ", invoice1.getPartNumber() );
     System.out.println("Description: ", invoice1.getPartDescription() );
     System.out.println("Quantity: ", invoice1.getQuantity() );
     System.out.println("Price: ", invoice1.getPricePerItem() );
     System.out.println("Invoice amount: ", invoice1.getInvoiceAmount() );
and that uses this class file:
public class Invoice
private String partNumber;
private String partDescription;
private int quantityPurchased;
private double pricePerItem;
     public Invoice( String ID, String desc, int purchased, double price )
          partNumber = ID;
     partDescription = desc;
     if ( purchased >= 0 )
     quantityPurchased = purchased;
     if ( price > 0 )
     pricePerItem = price;
public double getInvoiceAmount()
     return quantityPurchased * pricePerItem;
public void setPartNumber( String newNumber )
     partNumber = newNumber;
     System.out.println(partDescription+" has changed to part "+newNumber);
public String getPartNumber()
     return partNumber;
public void setDescription( String newDescription )
     System.out.printf("%s now refers to %s, not %s.\n",
partNumber, newDescription, partDescription);
     partDescription = newDescription;
public String getDescription()
     return partDescription;
public void setPricePerItem( double newPrice )
     if ( newPrice > 0 )
pricePerItem = newPrice;
public double getPricePerItem()
return pricePerItem;
Any tips for helping me out?

System.out.println("Part number:
"+invoice1.getPartNumber;
The + sign will concatenate invoice1.getPartNumber()
after "Part number: " forming only one String.I added the plus sign and it gives me more errors:
C:\>javac InvoiceTest.java
InvoiceTest.java:16: operator + cannot be applied to java.lang.String
        System.out.println("Part number: ",   + invoice1.getPartNumber() );
                                              ^
InvoiceTest.java:17: cannot find symbol
symbol : method getPartDescription()
location: class Invoice
        System.out.println("Description: ", + invoice1.getPartDescription() );
                                                      ^
InvoiceTest.java:17: cannot find symbol
symbol : method println(java.lang.String,int)
location: class java.io.PrintStream
        System.out.println("Description: ", + invoice1.getPartDescription() );
                  ^
InvoiceTest.java:18: cannot find symbol
symbol : method getQuantity()
location: class Invoice
        System.out.println("Quantity: ", + invoice1.getQuantity() );
                                                   ^
InvoiceTest.java:18: cannot find symbol
symbol : method println(java.lang.String,int)
location: class java.io.PrintStream
        System.out.println("Quantity: ", + invoice1.getQuantity() );
                  ^
InvoiceTest.java:19: cannot find symbol
symbol : method println(java.lang.String,double)
location: class java.io.PrintStream
        System.out.println("Price: ", + invoice1.getPricePerItem() );
                  ^
InvoiceTest.java:20: cannot find symbol
symbol : method println(java.lang.String,double)
location: class java.io.PrintStream
        System.out.println("Invoice amount: ", + invoice1.getInvoiceAmount() );
                  ^
InvoiceTest.java:24: cannot find symbol
symbol : method setPartDescription(java.lang.String)
location: class Invoice
        invoice1.setPartDescription( "Yellow Hammer" );
                ^
InvoiceTest.java:25: cannot find symbol
symbol : method setQuantity(int)
location: class Invoice
        invoice1.setQuantity( 3 );
                ^
InvoiceTest.java:30: operator + cannot be applied to java.lang.String
        System.out.println("Part number: ", + invoice1.getPartNumber() );
                                            ^
InvoiceTest.java:31: cannot find symbol
symbol : method getPartDescription()
location: class Invoice
        System.out.println("Description: ", + invoice1.getPartDescription() );
                                                      ^
InvoiceTest.java:31: cannot find symbol
symbol : method println(java.lang.String,int)
location: class java.io.PrintStream
        System.out.println("Description: ", + invoice1.getPartDescription() );
                  ^
InvoiceTest.java:32: cannot find symbol
symbol : method getQuantity()
location: class Invoice
        System.out.println("Quantity: ", + invoice1.getQuantity() );
                                                   ^
InvoiceTest.java:32: cannot find symbol
symbol : method println(java.lang.String,int)
location: class java.io.PrintStream
        System.out.println("Quantity: ", + invoice1.getQuantity() );
                  ^
InvoiceTest.java:33: cannot find symbol
symbol : method println(java.lang.String,double)
location: class java.io.PrintStream
        System.out.println("Price: ", + invoice1.getPricePerItem() );
                  ^
InvoiceTest.java:34: cannot find symbol
symbol : method println(java.lang.String,double)
location: class java.io.PrintStream
        System.out.println("Invoice amount: ", + invoice1.getInvoiceAmount() );
                  ^
16 errors

Any option is there to find the error record in loop for huge amount of rec

Hi Guru's,
In our production system we got a error. While debugging we found one of our loop getting 1 lakh records. One of the record from the internal table having some wrong values because of that its giving a error message. But we are not getting any proper message.
Now our problem is its very difficult to debug all the records one by one. Even its not possible to give Watchpoint. bze in what situations its giving this error that also not predictable. So how to find the error record?
Kindly suggest.
Ananadhan

Need a lot more info.
To start with is this CR Designer or some other product?
I suspect it's classic SAP products like Business One etc., if so please mark as answered and post your question int the correct forum.
Thank you
Don

Get Plugin Finding Service Error for weeks & weeks now - can't update plug-ins, need download .pdf doc, but says adobe unstable, plug-in needs update. now what

Want to download .pdf doc, but pop-up says it's unstable, need update plug-in. Tried to update, got error message, with "try later". Same for weeks now. Tried check for updates, Firefox is up to date, clicked update plug-ins... it tries, then again... same error message: "Plugin Finding Service Error. Please try again later".
Been so long now -- when becomes a mighty big question. Looked in forum, no joy.
Please, can someone tell me -- what's the go. I'm absolutely no good with computers, but this needs to get fixed. Should I stop using Firefox or what?
Thanks for your help.
Happy 2013 to all.
PS. (added a couple days later)
I'm told I should have added my next question in reply to TylerDowner here, instead of as I did. Sorry if that's so (really?) but I didn't even realize I could edit this.
So... TylerDowner, thanks very much for your reply, and please would you -- or anyone else who might be able to help -- see my first reply to you below. (seems a waste to slot in here again)
Feelin even dumber, (ha-ha)
raaraa

Tylerdowner -- >> thank you << for your reply, and my sincere apologies for this delayed response (probs, hospital, blah-blah, you don't want to know).
Have tried to download via that link but not sure if successful. Very slow dial-up connection is the pits. Waited hours 'n hours, fell asleep in chair even, finally had to give in and go to bed, left it going. Server does time out every 8-12 hours, so not sure how long it went. The download appeared complete -- ie, did not show any note of failure. Not sure if it would -- some things in the past haven't.
Anyway, had success downloading one much older .pdf file, but the link for one I wanted had expired, and I don't know anything else to try. Tried a couple of other links I have, not sure of age of file -- on clicking link, the browser opened, but nothing more happened.
Wondering -- is the download available in separate pieces instead of one big one? Perhaps worth trying again that way?
Please, if you would be forgiving, and persist with me a little further/longer -- would you make your recommendation/s for next step/s please?
Hope you're in a safe, comfortable place. So many places in the world suffering with extremes of all kinds.
R...

Firefox x86 32 on win8 rp 64 beta 16 gives persistent "eval in sandbox error" as "javascript error" even after uninstal/reinstal -

firefox x86 32 on win8 rp 64 beta 16 gives persistent "eval in sandbox error" as "javascript error" even after uninstal/reinstal -
have not yet uninstalled with deletion of all user files.
greasemonkey runs some javascripts - I don't give a hoot if they are "secure" or not, or indeed anything about "security". oh well I am odd that way.

Firefox beta 17.0b2 - Windows 7 pro x64 - problem started 10.13.12 after whatever Firefox auto update(s) installed that day. Not all sites, but MANY. e.g., Facebook. Whether Javascript enabled or not, with Firefox extensions/plugins on or off. Experienced as few as 4, as many as 20 (!!!!) error boxes to close before able to continue - depending on the site. Open in another tab or window still error boxes on CURRENT window, even if current site has no problem. Page refresh causes error boxes again. Any navigation on offending site (clicking on site links, opening photos, etc.) causes, again, error boxes.
Troubleshooting: Uninstalled Java. Reboot, then tested Firefox, no relief. Uninstalled Firefox. Reboot. Reinstalled Firefox (17.0b2). Reboot, then tested again, no change. Upgraded Java to most recent (1.7.90.5). No change. Subsequently added Firebug and ConsoleExport so can provide more info.

Cant find symbol error

why am i getting this "can't find symbol error" in relation to class Function?
import javax.swing.JOptionPane;
public class MYPA5
     public static void main ( String [] args )
          Function myF = new Function( );
          double Func1 = myF.getSum( );
class Functinon
     double x;
     String coeffa = JOptionPane.showInputDialog( null, "Give the first Coefficient");
   double a = Double.parseDouble(coeffa);
     String coeffb = JOptionPane.showInputDialog( null, "Give the second Coefficient");
     double b = Double.parseDouble(coeffb);
     String coeffc = JOptionPane.showInputDialog( null, "Give the third Coefficient");
     double c = Double.parseDouble(coeffc);
     String coeffd = JOptionPane.showInputDialog( null, "Give the fourth Coefficient");
     double d = Double.parseDouble(coeffd);
     double sum = a*Math.pow(x,0) + b*Math.pow(x,1) + c*Math.pow(x,2) + d*Math.pow(x,3);
     public double getSum( )
          return sum;
}

Just guessing here...
Because you named it Functinon instead of Function? (but that may just be a typo in your question of course)
or because it is not public and not in the same package as MYPA5?

CS2 Unable to find file errors

Hi
We are having trouble with photoshop cs2. We can not open most files. Tiff, PSD, some PDF files will give an "unable to find file error". Jpg files, and certain PDF files and TIFF files that use jpg compression work. I have tried resetting all the settings, changing scratch disks / memory usage, uninstalling all fonts, and reinstalling the application and the problem persists.
Also i do not know if this is related but the same time we started having errors in photoshop we also have problems in Microsoft Word. The font list shows a lot of fonts as just a white box. Other apps can use the fonts fine. Just not in word.
I have attatched a JPG file with screen caps of the errors.

I reset the options by doing the hold shift alt ctrl while starting up photoshop. Also i deleted all the preference files out of the application data\adobe\photoshop folder. Same problem persists.
Also another issue i have noticed. Say you perform an action like erasing somthing, or changing the brightness/contrast. You can not see the changes until you click on a different tool. Then it updates the display.
I will try and locate the faq and see what it says.

AnyConnect installation issues - Network Adapter is not created - cannot find any error?

I am a contractor with a Federal Agency that just swithed to using Cisco AnyConnect for VPN access. I am about the only person with this installation issue, that I know of. When installing the AnyConnect client on a Windows 7 machine running a 3.X msi install - the expected Cisco NewWork Adapter is not created in Network connections as I would expect. I have turned off Firewall services, I've turned off SQL services, Citrix, etc. But nothing I have tried allows this to install correctly.
When I attempt to use the AnyConnect VPN client and login the the remote service - I receive the
The VPN client driver has encountered an problem. Please restart your computer or device, then try again.
I have attempted the driver database fix suggested online - BUT it didn't correct the problem because I think my problem is in the initial setup, although I cannot find and error in the Windows/inf/setupapi.app.log and setupapi.dev.log that would suggest there is an driver problem.
The DART logs are a bit cryptic, but nothing stands out that would give me any idea as to what might be blocking the creating of the Network adapter the VPN Client would use to connect to the remote network.
Can anyone here point me in the right direction - I am not receiving help from configuration management - their solution is to format my entire computer and rebuild it which will cost me weeks of time and I have a deadline looming in Feburary.
Thank you!
Michael

Hi Jacob,
Let's try this & report the outcome...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
The interface that connects to the Internet should be dragged to the top of the list.
Then highlight the interface you connect with, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
208.67.222.222
208.67.220.220

AnyConnect installation issue - Network Adapter is not created - cannot find any error?

I am a contractor with a Federal Agency that just swithed to using Cisco AnyConnect for VPN access. I am about the only person with this installation issue, that I know of. When installing the AnyConnect client on a Windows 7 machine running a 3.X msi install - the expected Cisco NewWork Adapter is not created in Network connections as I would expect. I have turned off Firewall services, I've turned off SQL services, Citrix, etc. But nothing I have tried allows this to install correctly.
When I attempt to use the AnyConnect VPN client and login the the remote service - I receive the
The VPN client driver has encountered an problem. Please restart your computer or device, then try again.
I have attempted the driver database fix suggested online - BUT it didn't correct the problem because I think my problem is in the initial setup, although I cannot find and error in the Windows/inf/setupapi.app.log and setupapi.dev.log that would suggest there is an driver problem.
The DART logs are a bit cryptic, but nothing stands out that would give me any idea as to what might be blocking the creating of the Network adapter the VPN Client would use to connect to the remote network.
Can anyone here point me in the right direction - I am not receiving help from configuration management - their solution is to format my entire computer and rebuild it which will cost me weeks of time and I have a deadline looming in Feburary.
Thank you!
Michael

Hi Jacob,
Let's try this & report the outcome...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
The interface that connects to the Internet should be dragged to the top of the list.
Then highlight the interface you connect with, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
208.67.222.222
208.67.220.220

Cannot find symbol error.. really stuck.

I have a class named Rectangle.java. It is in a package "Geometry" together with Point.java and Line.java. But when I try to use Rectangle.java in my main program, MyRect.java, it gives me a "cannot find symbol" error, particularly the methods and sometimes the variables. I tried compiling just my Rectangle class and it compiled fine.. And I tried the Line and Point classes on another program and it works fine... well probably because the Line and Point classes are from a book(Ivor Horton's Beginning Java 2).. I am just starting out in Java. :)
Rectangle.java
package Geometry;
public class Rectangle{
    public Point[] corner = new Point[4];
    public String name;
    public Rectangle(){
        corner[0].setPoints(0,0);
        corner[1].setPoints(1,0);
        corner[2].setPoints(0,1);
        corner[3].setPoints(1,1);
        name = new String("Unknown");
    public Rectangle(double point1_x,double point1_y,double point2_x, double point2_y, String Name){
        corner[0].setPoints(point1_x, point1_y);
        corner[3].setPoints(point2_x, point2_y);
        corner[1].setPoints(point2_x, point1_y);
        corner[2].setPoints(point1_x, point2_y);
        name = new String(Name);
    public Rectangle(final Rectangle oldRect, String Name){
        corner[0] = oldRect.corner[0];
        corner[3] = oldRect.corner[3];
        corner[1] = oldRect.corner[1];
        corner[2] = oldRect.corner[2];
        name = new String(Name);
    public double getWidth(){
        return corner[0].distance(corner[1]);
    public static void printRectangle(final Rectangle rect){
        for(int i= 0;i<4;i++){
            System.out.println("Corner"+(i+1)+" X: "+rect.corner.getX()+" Corner"+(i+1)+" Y: "+rect.corner[i].getY());
System.out.println();
public String toString(){
return ("Name: "+name);
}MyRect.java
import Geometry.*;
public class MyRect{
    public static void main(String[] args){
        Rectangle myRect = new Rectangle(0,0,2,1);
        Rectangle copyRect = new Rectangle(myRect);
        printRectangle(myRect);
        double width = myRect.getWidth();
}and the errors:
MyRect.java:4: cannot find symbol
symbol : constructor Rectangle(double,double,double,double,java.lang.String)
location: class Rectangle
                Rectangle myRect = new Rectangle(0.0,0.0,2.0,1.0,"My Rectangle")
                                   ^
MyRect.java:9: cannot find symbol
symbol : variable name
location: class Rectangle
                System.out.println(myRect.name);
                                         ^
2 errors

Are you sure you have posted the whole content of MyRect.java
import Geometry.*;
public class MyRect{
    public static void main(String[] args){
        Rectangle myRect = new Rectangle(0,0,2,1);
        Rectangle copyRect = new Rectangle(myRect);
        printRectangle(myRect);
        double width = myRect.getWidth();
}I don't see the following error line in the code you have given.
MyRect.java:4: cannot find symbol
symbol : constructor Rectangle(double,double,double,double,java.lang.String)
location: class Rectangle
                Rectangle myRect = new Rectangle(0.0,0.0,2.0,1.0,"My Rectangle")
                                   ^
MyRect.java:9: cannot find symbol
symbol : variable name
location: class Rectangle
                System.out.println(myRect.name);
                                         ^
2 errors

Finder 10810 Error?

So I've been having this problem for a few weeks, where after I turn on my Macbook Pro, after about 5 or so minutes, everything just stops working. Say if I have iTunes open, I can see it, but I can't click on it. I can't play anything.. it's like it doesn't know it's there. Same goes for everything but Safari. It's the only program I can always use. And when I try to open programs that I hadn't opened before the big collapse, they just won't budge.
Also, when these errors start occurring, if I try to open Finder, it gives me the infamous 10810 error code. I've looked many places on how to fix this, but never could find a direct, spot on answer/solution.
Any help would be greatly appreciated.

Login to another User account and see if it does it there. Also, boot from your install DVD and run from there for a half hour testing mouse movement. If you have the same problems there, you might have a thermal hardware issue.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

Give navigation to find ACKNOWLEDGEMENT ERROR in XI

Similar Messages

Maybe you are looking for