Give Us a Link to the Mods!

I've just read yet another post in which a mod has offered the helpful advice to "click on my name and there's a link for contacting us". Except that it's not actually a link. That's OK for those of us in the know, but there have been instances where newcomers have been a little confused.
Come on guys, surely it would be a simple matter to turn the address into a real link. http://bt.custhelp.com/app/contact_email/c/4951. There, even I can do it!
You can click the white star next to this message if you think it was helpful.

Hi Guys
Yep! We heard you... We have been working with Lithium to get the functionality enabled so we could add the links into our profiles (wasn't possible before) so all are getting updated now.
Thanks for the feedback.
Kerry
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

Link between the mode of transport and storage location in IS-OIL Dn Stream

Hi
I am working on IS-OIL Downstream, and while testing the scenario of Purchasing from the other plant (through Purchasing Contract) through Data Collation I am facing a typical problem, and I hope I will get the solution on this.
I am doing the SR Report first and executing the same. After this I run the HR Report and I am putting the difference qty in EUB Item type. When I am verifying this the system is adjusting the qty and proposing the storage location, as per the mode of transport. Means if I maintain the mode of transport in Purchase Contract, for ex if it is 02 -- Train, the storage location will be train. But, I would like to know where is the link between the Storage Location and Mode of Transport, so that I can tell the system to pick up the particular storage location (currently it is picking up wrong storage location).
I will be grateful if any one helps me...
Thanks and Regards,
PKM

Hi pkm,
if you are working with the OGSD component Data Collation then there is no direct relation to the transport mode. The Data collation is only supporting a vehicle.
Best regards,
Fouad

Can anyone tell me or give me a link to the latest response from Apple regarding very real weak wifi signal on what seems to be a batch of both the new ipad and the earlier Ipad2. I have just bought a 2nd hand ipad2 and it has a very weak wifi signal

Over the last week or so I have been trawling the internet looking for references to weak wifi signals on the Ipad2 and was staggered by the sheer quantity of people who seem to have identical issues, not just with the ipad2 but also with the new ipad. What annoyed me most from reading the reams upon reams of comments made on the Apple community forum is the fairly large number of people who seemed to believe that 'these' people were either just moaners and wingers or else they must have something wrong with their router set-up rather than a serious fault with their ipad and it seems all because there ipad in question works like a dream.
Obviously I can only speak from my experience, and that is, I have an ipad2 32GB with wifi, purchased about 6 months ago and it works like dream with a good 2-3 bar wifi signal through 2 thick stone walls over 30 feet away. My router is a standard one supplied by my broadband supplier compatible with all 'g','b' and 'n' equipment. However, over a week ago now I bought second hand genuine ipad2 16GB with wifi from a close friend who has just purchased a new ipad3 to replace his old ipad2 (had it for over a year so no longer under warranty). When I started it up downstairs from my router, where I always use my other ipad2 which has a very strong wifi signal, I discovered that the new secondhand ipad2 I had purchased couldnt find a network signal at all. So after doing network resets and all other 'fixes' on the device recommended, I took it upstairs to my office where the router is based and found that the device could now locate the network, but the signal was lost over only 12 feet from the router!
I quizzed my good friend about this issue and he informed me that it has always been like this since he first purchased it and he never thought that it was a fault, it was just the way it was. When he first aquired the device he did think at the time that this distance was poor, but thought nothing of it as he didnt have any other ipad to measur ethe signal strength against, and as his router was in his living room anyway he nothing of it. Fair enough.
So, there we have it. One ipad2 with a very good wifi signal and another ipad2 with a very poor wifi signal running off the same router, both with the same IOS 5.0. ?
As well as all of the other isues that customers have picked up on, such as 'death grip' (which I must say does appear to happen, but personally i dont think that this is a serious issue if you are aware of this issue and have a strong signal anyway), my experience seems to be a good example of a 'duff' wifi ipad versus a 'great' wifi ipad', an issue confirmed by complaints from a fairly large number of customers who have also reported the same or similar weak wifi signals with both the ipad2 and the ipad3. So, as this shows the weak wifi signal is a very real issue it seems on a batch of ipad2 and 3's, which to my logic is obviously a hardware issue on a batch of early ipad2's and not a software one, otherwise all ipad's would suffer this problem! So, is it a faulty antenna or a faukty network card in an early batch?
So, the bottom line now is, of course, firstly, how can I get Apple to fix my other ipad2 when the warranty has run out? Any suggestions anyone?
Personally I think good Apple customer service should offer a recall with a replacement on this apparent batch of ipads, dont you?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Can anyone give me some link about the axample about the tree

Dear All:
I am learning something about the tree, is there any one can provide a link about a an example for tree node deletion /add?
and I also need an example about drop and drag a node from the tree too.
Thank you very much !

Start with this section from the Swing tutorial on "How to Use Trees":
http://java.sun.com/docs/books/tutorial/uiswing/components/tree.html
The Swing Connections has a couple of articles that might help:
http://java.sun.com/products/jfc/tsc/articles/

Give iView as link in portal content area

Dear All,
I have divided my portal content area into 4 section. In one section i got my GP process. I have created the process as iview. I have tried to give this iview link to the end-user to open the process. Is it possible to bring iview inside one section of content area. If any one did this or got knowledge on this, pls through some light on this.
with Regards,
Balachander

Balachander,
not sure what do you mean by "bring iview inside one section of content area". Are you willing to show only the single iView or you want to show it with some other iViews also? For first case URL to the single iView will work. For the second type of requirement you can add the iViews inside a page and give the Page URL to the users instead of iView URL.
Regards,
Shubhadip

How to upload an real media file and give it as link to users access

How can we upload an real media file into htmldb? How can we give it as link in the application to play from the client PC real player. Any help is appreciated

Hi,
The following is the program[Click Here| http://saptechnical .com/Tips/ABAP/email/EmailProgram.txt] which will send any format file. Actual Creator of the program is Amit Bisht.
Thanks & Regards,
Rock.

Have a nice day. I can't open the books linked to the Adobe ID. Always the overallocation says. But some of the books I downloaded two times. Still, it gives a warning in the form of more installations.

Have a nice day. I can't open the books linked to the Adobe ID. Always the overallocation says. But some of the books I downloaded two times. Still, it gives a warning in the form of more installations.

I think you should ask in the Digital Editions forum, Adobe Digital Editions

How can I start Windows XP Mode when there is no startup link in the Start Menu?

I have installed and had to uninstall and reinstall Windows XP Mode numerous times on my Dell desktop running Windows 7 Professional and now I cannot start it because there is no startup link in the Program Files folder. When i try to reinstal XP Mode
it tells me it's already installed, but I can't find the startup link.
Martin Willcocks

Hi,
Could you find XP mode in Start Menu?
How about using Windows Search feature to search Windows XP Mode?
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT5594 I have lost my I phone5 amd I have enabled lost mode. But still I can't find out where it could be and I cloud search gives offline signal. If the thief turns on my phone is it possible to find out my phone or given any signal for me?

I have lost my I phone5 amd I have enabled lost mode. But still I can't find out where it could be and I cloud search gives offline signal. If the thief turns on my phone is it possible to find out my phone or given any signal for me? is it possible for the thief to use or sell my I phone even it is on the locked mode by ICloud?

If it is turned on and your lock request is able to be fulfilled, a confirmation email will be sent to your Apple ID email address. There isn't any known way to bypass Activation Lock on your phone so no one will be able to use it. More information on Lost Mode: http://support.apple.com/kb/PH2700

Itunes not working on my laptop. It gives me an error meassage, "The procedure entry point dispatch_get_specific could not be located in the dynamic link library "

itunes not working on my laptop. It gives me an error meassage, "The procedure entry point dispatch_get_specific could not be located in the dynamic link library "

See Troubleshooting issues with iTunes for Windows updates.
The issue seems similar to that in the first box though it would be nice to have the complete error message. Tearing out all iTunes components and reinstalling as given in the second box should resolve.
tt2

Asigning Reports, specific tables and Url links to the Role

Hello Gurus,
could you please tell me the procedure of asigning Reports, specific tables and Url links in the role.actually i know the process of assigning T-Codes to the role but i dont know the procedure for reports and url links and tables...
i hope u people will respond positively.
Cheers.......
srinivas.korva

Hi Srinivas,
"i want to add only one particular table not all tables", you can do this using a Custom Transaction Code, the following are the steps to do it:
1) goto se93, give a unique name, say zxxx
2)Enter SE16 into the transaction field and select the flag the skip initial screen field:
3)On the lower portion of the screen, enter the following information:
Name of screen field: DATABROWSE-TABLENAME
Value: Enter the name of the table you want to browse with
4)save it.
5) Now add the transaction zxxx in th role, and assign it to the user.
With this, when user executes the transaction, he/she will be able to see only the perticular table you added.
"in PFCG what is the use of Exper mode for profile generation. what is the difference between general profile generation and expert mode profile generation".
Expert mode has 3 options:
1) Delete and recreate profile and authorizations---This will completely delete the old profile and add only the new once.
2) Edit old status----It will edit the old values
3) Read old status and merge with new data----This will add the new values aithout actually disturbing the old ones.
Hope it helps.
Please award points if it is useful.
Thanks & Regards,
Santosh

Meet the Mods

We have updated the Mods profiles to give some more information of who we are and what we are about
DaveM - Moderator
Head Quarters: Enniskillen. Northern Ireland
Tunes:: Anything related to Thin Lizzy or rock / metal in general.
Books: Mostly biographies but I'm a big fan of WW2 books.
Quality Movies:   I'd have to say Interview with the Vampire is my fav movie but anything horror or war related and I'm happy enough.
On the Box: Crime documentaries or again anything war related at all.
Awesome Sports: Boxing
Where I spend my time on the tinterweb (when not here ):
Mostly Thin Lizzy or gig sites.
Pets: None
The World of DavidM: If you haven't already guessed I worship Thin Lizzy but rock / metal in general plays a huge part in my every day life. I enjoy the odd night out but live gigs or concerts is my big thing. I love going to gigs. I'm a lifelong Liverpool fan which causes quite a few tears!!!
Working in BT: I really love working here. It's easily the best job around.
PaddyB - Moderator
Head Quarters: Enniskillen
Tunes:: Everything from Johnny Cash to The Beastie Boys to One Direction. I'm a big fan of the old school rap but enjoy good music.
Books: I'm in the middle of reading the first book of The Game of Thrones
Quality Movies:   Full Metal Jacket, The Thin Red line, PS I Love you, The Godfather 1, 2 (the 3rd was okay and I see it as a necessary ending). An old classic would be Gone with the Wind.
On the Box: Homeland, the Sopranos and The Wire. My favourite show on the box at the moment is Ex on the Beach and The Walking Dead, who doesn't love Zombies?! I also Enjoy Holly Oaks and Coranation Street
Awesome Sports: Squash, Football (I'm a Liverpool supporter YNWA)
Where I spend my time on the tinterweb (when not here ): Wikipedia, BBC News, YouTube.
Pets: Miya, my Doberman and booboo my Chiwawa.
The World of PaddyB: Outside of BT when they take the chains off, I enjoy playing my Xbox, I'm a big Halo nut and love the game probably a bit to much. I'm originally from south Africa and live for my BBQ's roll on the summer :-)
Working in BT: I have been working for BT for the last 7 years and have been a moderator for the last 3 years or so. During my time in BT I have worked everything from the BT Shop to Broadband orders Billing, PSTN and Broadband Faults. I really enjoy my roll as a moderator and working in social media in general, I am always learning something new from the community in a forever changing landscape. I'm here to help if you need anything don't be afraid to give me a shout.
StuartH - Moderator
Head Quarters: Enniskillen
Tunes:: Anathema, Katatonia, Porcupine Tree, Clutch, Alabama Thunderpussy, Orange Goblin, Misfits and Down
Books: not much of a reader but in the past Hitch hikers guide, Terry Pratchetts Discworld Novels, Stephen Kings Pet Cemetary (the film adaptation was shameful
Quality Movies:   Star Wars (original Trilogy) Anchorman, Alien, Kill Bill, Ghostbusters
On the Box: League of Gentlemen, Psychoville, The Thick of it, The Big Bang Theory
Awesome Sports: MMA, Rugby
Where I spend my time on the tinterweb (when not here ): A lot of social media sites and PC Sites, I tend to bounce around some forums as well but mostly discussing online gaming and PC Hardware upgrades.
Pets: Cat
The World of StuartH:
Bit of geek when it comes to computers and gadgets and enjoy trying to fix problems and have been known to open a pc for fun lol. Enjoy Music and play Bass in a band with a group of friends. Enjoy Travel but don't get the opportunity as much now that I am trying to be a grown up .
Working in BT:
Have worked for BT For best part of 8 years have done many jobs within the organisation all within Customer Service apart from a year where I was involved with Training and Development. I enjoy my role as a Forum Moderator and hope to continue within the area for the foreseeable future.
NeilO - Moderator
Head Quarters: Enniskillen
Tunes:: I like my dance tunes and I’m really getting into dutch house at the moment my favourite DJ’s are laidback luke and chuckie but I also listen to a lot of hip hop and dubstep and trance.
Books: I don’t read many books the last one I read was broken angel (not very good) so I think it put me off.
Quality Movies:  Shawshank redemption, Jango unchained, lord of the rings, Avengers, Avatar
On the Box: Game of Thrones, Walking dead, Sopranos, Big bang theory, Masterchef.
Awesome Sports: I love watching F1 and Football. Man U are my team, occasionally also I try to play golf and I stress try.
Where I spend my time on the tinterweb (when not here): Youtube, ebay, Wikipedia, IGN gaming.
Pets: None
The World of NeilO: Outside of BT I like playing PS3 and I’ve recently built my first gaming PC. I also like clubbing and make an annual pilgrimage to Ibiza every year for a week of madness and dance music with my best friends. Modifying and tinkering with cars has always been something that I’ve done and I can’t seem to leave any car I’ve owned standard for too long. I’m also a keen cook and enjoy trying new recipes.
Working in BT: I’ve worked in BT since 2004 and have done almost every type of customer service role from line faults to director level complaints and moved over to the social media team a few years ago and up until recently I worked on the BTCare twitter and facebook pages.
RobbieMac - Moderator
Head Quarters: Enniskillen, Northern Ireland
Tunes: Enjoy listening to trance/house music mostly but I’m easy going and would be happy listening to most genre of music..
Books: Not a big book reader to be honest. I find watching movies keeps my attention longer
Quality Movies:  The Green Mile, Shawshank Redemption, All the Die Hards, Bad Boys 1 & 2, The fourth Kind, Taken 1 & 2, Black Hawk Down, The Bond movies (even the older ones) and everything involving Eddie Murphy!!
On the Box: Criminal Minds, The Inbetweeners, Celebrity Juice, Bear Grylls, The Cube, NCIS, Mythbusters, CSI and I enjoy anything presented by David Attenborough..
Awesome Sports: My Favourite sport would have to be the footy and I’m a big Man Utd fan! I enjoy “watching” snooker (as playing is much harder than the pros make it look) and I’m also well entertained watching the darts!
Where I spend my time on the tinterweb (when not here ): I do the odd bit of surfing when I’m at home but most of my time is spent competing online on my PS4. My “better half” recently asked me would I ever get sick of it but I could safely say the answer to that would be “no!!”
Pets: Harley (My Yorkie)
The World of Robbie: I’m an avid online gamer and most of the time I’m flat out on my PS4.
Working in BT: I’ve been working at BT now for the last 7 years and have worked in most areas of the business. Over the last 3 years I’ve been working in social media and have enjoyed every minute of it. I’m excited about the journey ahead on the forum, getting to know all of you to share my knowledge and to learn from you guys too no doubt
OlgaC - Moderator
Head Quarters: Enniskillen, Northern Ireland
Tunes: I will listen to most types of music, from dance to rock. I can adapt to all styles of music and you could find me at any type of gig.
Books: Game of Thrones, The Hunger Games, PS I Love You.
Quality Movies: Taken, The goonies, The Shawshank Redemption, The Green Mile, The notebook, Step Brothers.
On the Box: 24, Breaking bad, Luther, CSI, Game of Thrones (the books are better )
Awesome Sports: I am into most sports and will happily spend an evening or weekends watching the football. I spend time watching boxing, darts it’s all spectator sports unfortunately.
Where I spend my time on the tinterweb (when not here ): Shopping, Social Networks and more shopping! I keep my postman busy!
Pets: None
The World of Olga: In my spare time I enjoy going out socialising with my friends although it’s not as often as I would like nowadays Going to the cinema and generally chilling out.
Working in BT: I have worked in BT for 6 years now starting with billing and then recently moving onto Social Media. I have been working on BT Sport for the past few months which I really enjoyed and I am looking forward to working on the Forum and learning new things
StephanieG - Community Manager
Head Quarters: Enniskillen, Northern Ireland
Tunes: A bit of everything (apart from anything headache-inducing!)
Books: Too many to list! Favourite authors include Terry Pratchett, Steven Erikson, Isabel Allende, Pablo Choelo.
Quality Movies: The Departed.
On the Box: Homeland, The Walking Dear, Breaking Bad.
Awesome Sports: Watching sports? None. Doing sports? Hm, does going for walks count? Occasional gym-goer.
Where I spend my time on the tinterweb (when not here ): Reading blogs, tweeting, YouTube.
Pets: None
The World of StephanieG:
I enjoy reading (mostly fantasy novels), and I have been known to dabble in astronomy.
I must say I am bit of a geek as well when it comes to fantasy and sci-fi books and movies, and I have been known to dabble into anything ranging from studying German to playing the guitar (so far quite badly, but I’m getting there!), though at the moment my main personal interest is astronomy. I am originally from Italy so at least I have the Italian language covered pretty well!
Working in BT:
I have been with BT since the 25/09/06 (I still remember the date!) and I initially worked taking billing calls. Since then, I have gained experience in pretty much every other aspect of customer service working via all sorts of mediums (calls, emails, Live Chat, blogs, Twitter, and – obviously – forums). I have been a moderator on this forum since its Beta inception and I now work with SeanD as Community Manager. My time in BT has been challenging at times but I've thoroughly enjoyed the experience and wouldn't change it!
SeanD - Community Manager
Head Quarters: Enniskillen, Northern Ireland
Tunes:: Trance, (Above and Beyond, Armin Van Burren, Ferry Corsten, Paul Oakenfold) Rock (3 doors down, partial to a bit of ACDC). Cant stand any sort of POP music
Books: Long Walk to Freedom by Nelson Mandela
Quality Movies:   Inception, Black Hawk Down, The Ghost and the Darkness, IP Man 1 & 2, Ong Bak
On the Box: Walking Dead, Sons of Anarchy, Dexter, Person of Interest and Game of Thrones
Awesome Sports: MMA, Football, Rugby Union, Rugby Sevens, Golf, Boxing, Snooker
Where I spend my time on the tinterweb (when not here ): YouTube, IMDB, Wikipedia
Pets: None
The World of Sean D:
I’m an avid Man United Fan and enjoy socialising, in the pub or otherwise. I love to travel, both around Ireland and abroad. I would one-day love to see the Aurora Borealis. I enjoy anything technical and love tinkering with computers, I’m by no way an expert but that’s part of the enjoyment. I am also a huge Halo fan and enjoy the online aspect of battling it out with people all over the world.
Working in BT:
I have been with BT since 2006 and thoroughly enjoy my time here. I started out in broadband sales, helping customers place orders when they were unable to do so online. I have also worked on the old BT Shop Sales, Customer Services, doing orders and billing and BT Business live chat. I started working on BT’s Social Media programme in 2008 and have been a moderator since the old Beta forum. I am now one of the community managers and absolutely love my work.
NigelE
Head Quarters: Enniskillen, Northern Ireland
Tunes: Pretty much anything that falls into the category of Rock
Books: Anything by Michael Crichton, Stephen King or John Grisham, and yes the books are always better than the movies!
Quality Movies: The Dark Knight, Goodfellas, Predator, Cobra, Commando, Rocky, Argo, Skyfall
On the Box: I’ve generally given up on television with the exception of whatever is on GOLD or Dave (mainly old Top Gear episodes)
Awesome Sports: The vaguely Football-like sport that Liverpool FC play
Where I spend my time on the tinterweb (when not here ): Browsing various videogame forums, amazon, googling random stuff, getting a rise out of Man U fans on footy message boards
Pets: None
The World of Nigel: Spending time with my other half and watching sports (possibly involving the odd pint) Quite big into my videogames at the moment on the mighty Wii U
Working in BT: Since 2004 – started out doing calls and working my way up to doing social media via a couple of career detours… like the rest of the guys I love it and can’t imagine doing anything else
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

rawhog,
Please don't spam other moderators that have nothing to do with the iPhone 4 pre-order process.
The truth is ALL stores should receive inventory and that list is no longer needed nor do I have enough time to support it. Also, we will never release counts.
Give your store time to receive any additional shipments and check with them this evening.
Jacob|Web Planner | Best Buy® Corporate

Can anyone give me exact answer of the following questions???

what is NACE and for what it is used?
what is output types?
what is message type?
what is need of configuring the output type and message type and why???
How can u add the field in standard table and how can u make data flow into table field in that standard table field???
Regards,
Nirav Parekh

Hi
Output type and Message Type Both are same
NACE is the Tcode used to link the Application type, Output Types and its processing Routines like ( Driver programs and attached Script forms or Smartforms).
You should know the Application of a document first Like:
for PO it is EF, for sales Doc's it is V1, for Delivery docs it is V2, for billing Doc's it is V3 etc.
so first select the Application type (ex: EF) for PO and press OUtput types
then a list will come in that you should know the related output type for PO.
in this case it is NEU,
select that and click on the processing Routines button on the left side
it will display the Medium, Driver Program and the Script form or smartform related to that document..
Output is a link between the Driver Program and the Sapscript,
An output type summarizes messages of the same meaning. It contains parameters that are valid for all its assigned messages, for example appropriate partner functions.
Transmission medium is a medium which the layout will be come out, this may be printout, Fax or Mail
Check this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/19884743b111d1896f0000e8322d00/content.htm
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Output Determiantion :
You can use output control to automate either messages or subsequent processing of partner-specific messages"
This means, it provides a method for you to perform subsequent processing once a document is saved in the system. This subsequent processing is normally to print the document, but can also include activities such as:
- Faxing the document
- Emailing the document
- Sending an idoc of the document
- Sending an EDI message for the document (via an Idoc)
- and so on.
In general, it uses the condition technique to determine what, if any, output is to be produced. The condition technique works by selecting key fields from the document (document type, plant, etc.) and matching them to master data records you have previously set up. If there is a match, then output is produced.
You can use transaction NACE for the output determination settings for all applications.
1. When you start transaction NACE, a list of all represented applications appears.
2. From this initial screen, you can access all the individual processing screens for output determination from the EDIT menu.
3. Select the relevant application. This transaction does not have a menu path in customizing.
Refer the following links.
http://help.sap.com/saphelp_crm40/helpdata/en/b3/58bf39f7568648e10000000a11402f/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/c8/19878343b111d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/c0/4e4746497d11d385ee0000e81ddea0/content.htm
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
Using the APPend structure in the menu of SE11 Table we can add new fields into table
and these two new fields are to be placed on a screena nd are to be populated along with the transaction data from the related transaction of that table.
<b>Reward points for useful Answers</b>
Regards
Anji

How to find the mode of an array of strings

Hey guys,
So I came across this little problem that I thought I could solve relatively easily, but it turned out quite messy.
I have this array of strings and I want to find the most frequent entry of that array. Let's say I have the following array.
apple
apple
kiwi
orange
apple
the mode would give me apple. I thought about converting the strings into a number and then find the mode as usual.
But if the string was too long, it seems a single number cant be used to represent it.
Any ideas on a clean way to do this?
Solved!
Go to Solution.

chembo wrote:
This may work also
You should probably link to the thread where this solution was first presented instead.
Since the question was: "I have this array of strings and I want to find the most frequent entry of that array", here's is a more tailored solution to the actual question.
Still, my more traditional approach outlined in the first answer would probably be more efficient, because it does not generate any large data structures. Try it!
LabVIEW Champion . Do more with less code and in less time .
Attachments:
MostFrequentStringEntry.vi ‏8 KB
MostFrequentString.png ‏6 KB

Can someone please tell me why when I order an Itunes app. , do I always get charged twice for the same thing. It has happened on two different occasions. Does it have anything to do with having 2 different ipods linked to the same account?

Can someone please tell me why when i order an app on my sons ipod, do I get charged twice for it? When I tried do report a problem with the charge, it said that I can not get a refund on that item. This is the second time this has happened to me. Does it have anything to do with having more then one ipod linked to the same account? Thanks for any help you can give me!!!

It has nothing to do with have more than one device using that account.
After you purchase it once, you redownload it on other devices by the following, not like purchasing a new app.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you really got charged twice for purchases the same app twice with the same account contact iTunes again by:
Apple - Support - iTunes - Contact Us
Make sure that they are really the same app first.

Give Us a Link to the Mods!

Similar Messages

Maybe you are looking for