Give user access to usb/iphone??

Hello all. I'm trying to get usbmuxd+ifuse working with my iphone (installed them from AUR along with various dependencies). All in all they seem to be working, but trying to mount the phone I get this:
libusb couldn't open USB device /dev/bus/usb/001/006: Permission denied.
libusb requires write access to USB device nodes.
The doumentation says I have to create a user called usbmux (which I have). The problem, I'm pretty sure, is that usbmux does not have access to my usb-devices. How would I go about giving a user control over usb-devices?
Thanks in advance.

chmod 777 /dev/bus/usb/001/006 Should work, however that is certainly not a solution. There was a way to make USB accessible to user, but I don't remember it right now, I think it was somewhere on the wiki, If I find it, I'll edit my post.
EDIT:
Try setting this in /etc/fstab, see if it helps (be careful with the group id, though....)
EDIT2:
Whoohooo post #700
Last edited by Dheart (2009-11-06 21:45:54)

Similar Messages

DS 5.2 - how to give users access to suffixes via the admin console?

I'm in the process of migrating my LDAP install from 5.1 -> 5.2, and have encountered an issue with console access. The "admin" user previously had access to all the suffixes in the directory. After loading the data into a 5.2 directory, this access was lost. The "admin" user can login to the console, but in the directory tab, only sees "cn=schema" and "cn=monitor". The data suffixes are not present. I have verified that the ACI for this user should be allowing access to the data suffixes.
Any ideas?
Additionally, I've tried creating new users with console access, and none of them can even login. Thoughts?

never mind, found it there.

PC User/Accessing Photos on Iphone

Hi. Let me first say I do not have mobileme.
Is it possible to access my photos that i have in my cameraroll on my iphone when its connected to my pc? I thought I would be able to see my phone as a drive letter etc.
Any help is appreciated

Thank you. I click "import from camera or scanner" and no devices show up. I made sure it was connected and made sure the camera was on.
At one point windows would display a message (each time i connected my iphone to my computer) asking me if i wanted to open the folder to view the photos or import the photos to my computer. That displayed message no longer appears.
Thanks.

ASA5510 - Is it possible to give users access 2 hours per day?

Hi!
As the topic say; is it possible to set up so specific users only have, say, 2 hours of internet access per day?
They should be able to log on any time of the day, and so many times they want, as long as the total usage does not exeed 2 hours per day.
Is this possible on a ASA5510, or any other device Cisco is selling?
Thanks.

You would have to do that with a proxy or web security appliance. Take a look at Cisco's Ironport products.
http://www.cisco.com/en/US/products/ps10164/index.html

User access more than one application

how can i give user access on more than on apex application

>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your forum profile with a real handle instead of "984229".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
how can i give user access on more than on apex applicationSee +{thread:id=515240}+ for the basic technique, and these Oracle Magazine articles for extended examples:
<li>Creating Custom Authentication
<li>Build a Menu Framework
Note that APEX has a built-in publish-and-subscribe model. You create a "master" application to contain publishable components like authentication schemes, LOVs and templates. Theme templates are created, maintained and published through this application, and other applications reference the standard templates by subscription from the master application. Changes can be pushed out from the master application to all subscribing applications.

Can I give our AD users access to Visual Studio Online?

Our AD is connected to our Azure Active Directory and synced via DirSync.
Is it possible for me to give our AD users access to VSO and they use their organizational login credentials OR do they need to create Microsoft accounts?
Our goal is single sign-on with our AD credentials. Please let me know if this is possible?
Thanks, Sam

Hi Sam,
You can link your Visual Studio Online account with your Azure Activy directoy. Directory administrators control who joins the directory and has possible access to your Visual Studio Online account. The users can use Azure Active directory accounts
to sign in Visual Stduio Online account. You can check this
page for more information about manage organization access for your account.
The numbers of users can access Visual Studio Online account depend on your license of Visual Studio Online account. You can add no more then 5 basic users and unlimited MSDN subscriptions if you have Basic license of Visual Studio Online account. Check
this
page for the pricing. However, you can assign team members stakeholder license if the users only view the project-level information. Check this
page for more information about stakeholder license of Visual Studio Online.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to give a user access to just 2 fields in a user account properties

Is it possible to create a user that has basic access rights in Active Directory but give it access to just the users name and telephone number of every user in Active Directory? We have a Windows 2003 AD level at the moment.
Thanks.

Sure, by default a user you create in Active Directory is going to be apart of Domain Users. This user will be an Authenticated User and will have Read permissions over all other users in AD, meaning they can see all other users information.
If you want you can delegate control to a user or group and limit or expand what the user can do. For instance you can right-click the name of your domain in Active Directory Users and Computers and click Delegate Control then click Next. Click
add to add a user or test user, then click Next. Click the Create a custom task to delegate then click Next, select Only the following objects in the folder, then select account objects and click Next. Click Property-specific and there you'll find things like
Read displayName. Check Read displayName and Click next then click Finish. So you've delegated that to that user or group.
How to Delegate Basic Server Administration To Junior Administrators.
http://support.microsoft.com/kb/555986
Best Practices for Delegating Active Directory Administration
http://technet.microsoft.com/en-us/library/cc773318%28v=ws.10%29.aspx
If it answered your question, remember to “Mark as Answer”.
If you found this post helpful, please “Vote as Helpful”.
Postings are provided “AS IS” with no warranties, and confers no rights.
Active Directory: Ultimate Reading Collection

Hi Trying to download CS5 Design Premium. We have a copy on the Mac and want to put a second copy on the Macbook pro. Can download the file but when it is clicked the file give an error message "User access denied" and dumps the download. So hence I do no

Hi Trying to download CS5 Design Premium. We have a copy on the Mac and want to put a second copy on the Macbook pro. Can download the file but when it is clicked the file give an error message "User access denied" and dumps the download. So hence I do not get an installation screen or a chance to enter the Licence no.

Use another browser.
Mylenium

TS3992 I can't back up to icloud on my iphone. I have 25 GB of icloud backup storage, but it won't give me access to backup to it. How do you fix. My phone is almost full.

I can't back up to icloud on my iphone. I have 25 GB of icloud backup storage, but it won't give me access to backup to it. How do you fix. My phone is almost full. How can I start using the icloud storage?

If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.

Can we change the keyboard language that is displayed on iphone programatically i.e can we give user option to change keyboard to different language from application at runtime?

Can we change the keyboard language that is displayed on iphone programatically i.e can we give user option to change keyboard to different language from application at runtime?

Hi All,
Please Update the Thread
Regards
Khanna

Why can I not access My iPhone on my Air - they have the same cloud account - same iTunes - logged onto the same wifi network... and connected via USB - difficult much?!its killing me ahhh my screen smashed and i want access to my iPhone on my macbook

Why can I not access My iPhone on my Air - they have the same cloud account - same iTunes - logged onto the same wifi network... and connected via USB - difficult much?!its killing me ahhh my screen smashed and i want access to my iPhone on my macbook..
why is it sooo hard still --- can anyone inform me on this miracle app please
thank you
sincerely
Theigalaxy

find my iphone is something one needs to activate on the phone itself using the same appelID is nowhere near enough
if it is then one can track, play a sound and remote whipe it from
www.icloud.com
if your screen is smashed and you think you can use find my iphone to get any data from your phone you are sadly mistaken

Give external users access to resources?

Hello TechNet
I need to know if it's possible to give external exchange users access to a meeting room or a resource in Exchange.
We have Exchange 2007 and 2013, the users in the Exchange 2013 enviroment will need access to resources in the Exchange 2007 enviroment. The most important thing is that users can be able to book meeting rooms and get an instant reply from the meeting room.
I've had a look at GalSync (http://www.galsync.com/) but this tool will only synchronize the objects.. so i might as well create a simple powershell script instead to accomplish this.
If needed I will upgrade the Exchange 2007 to 2013, this needs to be done anyway.
Thanks :)
Best Regards Bjørn Olav Vangen Aure

Hi,
About giving external exchange users access to a meeting room or a resource in Exchange, do you mean let non-Exchange users (Hotmail users, Gmail users etc.) to book Exchange room mailbox or Exchange 2013 users for Exchange 2007 server? What’s your detailed
Exchange environment? An organization with Exchange 2007 coexistence with Exchange 2013 or two forests with one for Exchange 2007 and another forest with Exchange 2013?
Generally, if Exchange 2007 and Exchange 2013 are in the same forest of one organization, all room mailboxes created in Exchange 2007 and Exchange 2013 should be available for all users in the organization. If your requirement is cross-forest room booking,
we need to establish a forest trust between the forests, configure cross-forest Availability service, and GALSYNC. For more information about detailed steps, please refer to the following article:
http://blogs.technet.com/b/neiljohn/archive/2011/10/12/exchange-server-2010-cross-forest-delegation.aspx?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+NeilJohnson-ARocknRollNerd+(Neil+Johnson+-+a+rock+'n+roll+nerd...)
Hope it helps.
Thanks,
Winnie Liang
TechNet Community Support

How do you give user permissions to access a terminal server?

How do you give user permissions to access a terminal server?

Refer : http://technet.microsoft.com/en-us/library/cc781509(v=ws.10).aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Power Shell Web Access - How to limit the cmdlets and give regular users, access to perform tasks

It is possible to give to regular/standard users, powershell web access to give only, for example, "get-" cmdlets?
The ideia is to provide help desk tech users, a minimum level of access on some servers, and it will be usefull to give then, basic and restrcted access to a few cmdlets, performe harmless activities and mybe some level of access, not alloweing to to using
RDP, but PS, insted

While PowerShell Web Access (PSWA) does require authorization rules to function, these rules do not specify what cmdlets can be used in a PSRemoting session. The PSWA authorization rules define what user, or group of users, can remotely connect to what computer,
or group of computers, through the PSWA gateway (the PSWA server).
What you need to research are session configurations and/or endpoints. These are separate from PSWA, but can be used in conjunction with PSWA (PSWA website > Optional connection settings > Configuration >
NameOfConfiguration), just as they can in a standard console-based PSRemoting session (Enter-PSSession -ComputerName
server01 -Configuration NameOfConfiguration -or- Invoke-Command -ComputerName
server01 -Configuration NameOfConfiguration).
Start your research with New-PSSessionConfigurationFile and then Register- and Unregister-PSSessionConfiguration. These have been great for our environment, allowing non-admin users access to run very specific cmdlets as an admin, without being an admin
on the computer.

What provision should i give to user accessing applications via Smartview?

What provision should i give to user accessing applications via Smartview in Shared Services.?
Would Server access do? Or i need to give something else?
Requirement is tht the user should be able to retrive and submit data via Smartview.

You need to provision the user with server access - this will give the user the ability to connect to the Essbase server in Smart View only. The user will not see any applications listed.
Then provision the user as write on each application you want them to see and submit data.
Regards,
Robb Salzmann

Give user access to usb/iphone??

Similar Messages

Maybe you are looking for