Gives an error when running lm in embeded way

Hi all,
I tried the following script but it gives me an error.
cat("run embeded lm..")
mod3 <- ore.doEval(
function() {
library(ORE)
library(biglm)
ore.sync(table="MSCI_DAILY_INDEX")
dat <- ore.pull(ore.get("MSCI_DAILY_INDEX"))
biglm(STD_EOD00D_LOCAL ~ GRS_EOD00D_LOCAL, dat)
}, ore.connect = TRUE);
date()
Error in match.call(definition, call, expand.dots) :
unused argument(s) (ore.connect = TRUE)
Calls: ore.doEval -> .ore.eval -> .ore.matchFUN -> match.call
According to oneline documentation, it shoudl be a correct way to run the scripts under database-embeded engine.
http://docs.oracle.com/cd/E11882_01/doc.112/e36761/using.htm
However, if I remove this ore.connect=TRUE parameter, it would gives me an error something like "connection is not established". If I add ore.connect(....) in the function again, it works but very very slow...
Please suggest a solution.
Thanks,
Copper

Thanks Denis,
Mine is 1.1. Could you please send me the link of the 1.3 installation file?
Do I need to run any specifial steps to upgrade 1.1 to 1.3? (Upgrade manual will be very helpful)
Thanks,
Copper

Similar Messages

Min Mx planning report gives an error when run with RE-Stock yes.

Hi All,
We are going to implement Min Max planning for the first time.However when we test it at org level with Re-Stock parameter YES it gave an error.
what are the additional setups need to be done for it?
It works fine when running with re stock no.and gives the out put of the report accurately.
Thanks.
MPH

Hi Garry,
These are the parameters and error codes are also given.
P_ORG_ID='328'
P_LEVEL='1'
P_SELECTION='3'
P_CAT_SET_ID='1'
P_CATG_STRUCT_ID='101'
P_SORT='1'
P_D_CUTOFF='2009/07/03 00:00:00'
P_D_CUTOFF_REL='0'
P_S_CUTOFF='2009/07/03 00:00:00'
P_S_CUTOFF_REL='0'
P_USER_ID='5411'
P_RESTOCK='1'
P_DD_LOC_ID='32488'
P_NET_UNRSV='1'
P_NET_RSV='1'
P_NET_WIP='1'
P_INCLUDE_PO='1'
P_INCLUDE_MO='1'
P_INCLUDE_WIP='1'
P_INCLUDE_IF='1'
P_INCLUDE_NONNET='2'
P_LOT_CTL='3'
P_DISPLAY_MODE='1'
P_SHOW_DESC='2'
P_PUR_REVISION='2'
*MSG-00069: Calling INV_MMX_WRAPPER_PVT.exec_min_max from Before Report Trigger
MSG-00070: INV_MMX_WRAPPER_PVT.exec_min_max returned an error:
REP-1825: Before Report trigger returned FALSE.*

Spectrum digital DSK5416 driver setup gives an error when test wizard is run.

Please help us with the following problem we are facing:
1.   Spectrum digital DSK5416 driver setup gives an
error when test wizard is run. A snap shot of the same has been
attached.
2.   The A/D module doesn’t pickup microphone signal or
an audio sample for loopback but the implementation of the same works
fine in CCS environment. (We are using Mic In and Speaker Out lines)
3.   When a real-time application has run successfully
and if you close the VAB environment the application starts running
automatically until you reset the board.
4.   We don’t find the flash program button enabled, so
that any real-time program can be burned into flash and demonstrate the
embedded feature.
Note:
We are using Windows Xp professional edition.
Program is developed using DSK5416

Hello, I have included some information that will help address your questions: (1) I couldn't see the attached image file (contained errors). The RIDE/VAB DSK5416 Driver makes use of a JTAG communication when reading/writing memory on the DSK5416 hardware. You will need to make sure that the JTAG transfer option has been selected in the Driver Setup dialog box. The memory test process may seem to take a long time due to the amount of memory being accessed. (2) The VAB RTDSKAD block component provides a one-channel A/D input that makes use of the line-in channel on the DSK5416 hardware. (3) VAB does not remove the downloaded DSP executable program from DSK5416 memory, and it does remain resident. That being said, I wouldn't expect that the program would begin execution when VAB is closed. I would recommend that you verify that the DSP program stopped properly upon selecting the VAB Stop command. Then, close VAB as normal. (4) The RIDE/VAB driver for the DSK5416 does not support programming of flash memory on the DSK5416 hardware. Regards, Steve

Shell Script gives error when run through cron job.

Hi,
The following shell script runs without any problem when executed manulally.
USED=$(df -h /arch | tail -1 | awk '{print $5}' | cut -d '%' -f 1)
if [ ${USED} -gt 90 ]
then
find /arch/AUBUAT/ -type f -mtime +0 | xargs rm
find /arch/AUBMIG/ -type f -mtime +0 | xargs rm
fi
But the same gives below error when called from a cron job:
/backup/arch_test.sh: syntax error at line 1: `USED=$' unexpected
We are running following version:
bash-3.00$ uname -a
SunOS uaeaubdbdr01.aub.af 5.10 Generic_141444-09 sun4u sparc SUNW,SPARC-Enterprise
Kindly assist.
Thanks
Edited by: user13362786 on Apr 20, 2011 4:36 AM

Hi,
When I used #!/usr/bin/sh now even the manul execution of the script fails with the same err:
bash-3.00$ ./arch_test.sh
./arch_test.sh: syntax error at line 2: `USED=$' unexpected
And when I used #!/usr/bin/ksh the manual execution runs fine but again when the script is run from cronjob it now give dirrect err:
/backup/arch_test.sh[2]: df: not found
/backup/arch_test.sh[2]: tail: not found
/backup/arch_test.sh[2]: cut: not found
/backup/arch_test.sh[2]: awk: not found
/backup/arch_test.sh[3]: test: argument expected

Jsp Error when running graph reports on 9ias server

i getting the following message error when running a graph jsp report on my company unix 9ias server:
org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
     at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(PortfolioImpl.java:79)
     at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(ManagerImpl.java:147)
     at com.inprise.vbroker.orb.DelegateImpl._bind(DelegateImpl.java:196)
     at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java:365)
     at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java:493)
     at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java:356)
     at oracle.reports.engine._EngineReportStub.doneReport(_EngineReportStub.java:36)
     at oracle.reports.definition.RWJspProxy.doneReport(RWJspProxy.java:261)
     at oracle.reports.definition.RWReport.done(RWReport.java:1087)
     at oracle.reports.jsp.ReportTag.release(ReportTag.java:398)
     at oracle.jsp.runtime.OracleJspRuntime.releaseTagHandler0(OracleJspRuntime.java:1109)
     at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1213)
     at afpdrep.crystal._flip._flip1._jspService(_flip1.java:687)
     [SRC:/afpdrep/crystal/flip/flip1.jsp]
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
     at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
Thanks for any help in advance.

Hi Simon,
Looking at the exception, it seems the machine is so slow that it could not give enough time for the report engines to start up can also result in this exception.
Please try the following :
Increase the callbacktimeout parameter for the report server. In server conf file that increase the callbacktimeout parameter for the report server from 1 minute (60000 milliseconds) to 3 minutes(180000 milliseconds)
Thanks,
Vinod.

Intermitten Errors when running reports in Crystal Report Viewer

Hi All,
We get intermittent errors when running the same crystal report over and over again. Most of the time, it would run perfectly fine. Once in a while we would see the error message below displayed...
Failed to open the connection. Failed to open the connection. C:\DOCUME1\USBOAD1\LOCALS~1\Temp\{432E6564-2811-4364-84FB-5E315F8DCBCA}.rpt
CrystalReportViewer - CrystalReportViewer1
Error: Object reference not set to an instance of an object.
We don't know how to reproduce this error. We tried looking into the BusinessObjects log files and the error is trapped inside C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Logging\crystalras_2009420_3626_2716_ras.log with the message below:
ErrorLog 2009 4 21 11:28:28.598 2716 10272 (\servers\ras\dtsagent\reporthandler.cpp:11592): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11588 ErrorCode:756 ErrorMsg:"Failed to open the connection.
Failed to open the connection.
C:\DOCUME1\USBOAD1.000\LOCALS~1\Temp\{432E6564-2811-4364-84FB-5E315F8DCBCA}.rpt" DetailedErrorMsg:"
Question:
Does anyone know why this is happening? Any help will be much appreciated. It happens maybe 1 out of 10 times the report runs.
Versions:
CR XI R2 SP1
.Net Framework 2.0
Windows 2000 SP4

Hi,
Give it a try by using the close and dispose method for report object and also use the GC.collect.
Hope it helps!!
Amit

Error when running a report in BPC NW

I am getting the following error when running a report for my application in BPC NW.
EVDRE encountered an error retrieving data from the Web Server (retrying in (X) seconds).
This error comes with this dialog option box to either continue or cancel retrying retrieving data. Retrying doesn't help either.
Any report I run (on any of my appsets), I get this error. I used the EVDRE function and also tried running a report using the template as the basis. But I get the error either way.
Does anyone know why this error is occurs or how to debug this issue. I saw some information about this in earlier threads but could not make much out of it.
Appreciate any assistance.

Sanjay,
This is a very generic error...Couple of places to look for....
1)Reprocess the application (Modify application + Reassign SQL Index + Process Application)
2)optimizing the application sometimes helps (Full Optimize + Compress Database + Index defragmentation).
3)Create a "evdataserver_debug.txt" in user's private publication folder on server side to populate very detail level logging and check the log on client side EVDRE_LOG.txt for further peek into where things are getting messed up.
if evdataserver_debug.txt does not get populated on BPC 5.x...it is an issue with IIS authetication on Application server.
4)You have to check the event viewer into .NET server and also the BPC logs which can be found into
BPC\Logging for further details ..
Hope this helps..
Edited by: Vishal Mahawadhi on Jun 24, 2009 9:50 AM

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders" -or- The icon in the dock bounces once, and nothing

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders"
-or-
The icon in the dock bounces once, and nothing happens.

Windows or Mac, and exactly which operating system version?

Getting the MDX query select error when running a webi report on BI query

Getting the following error when running a webi report on BI query :
A database error occured. The database error text is: The MDX query SELECT { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] } ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521] failed to execute with the error Unknown error. (WIS 10901).
I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
Please help in this regard.
Thanks,
Jeethender

The Fix Pack is also for Client Tools--it is a separate download. Please see the text below for ADAPT01255422
ADAPT01255422
Description:
Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
The following database error happens: "The MDX query ... failed to execute with the error
Unknown error (WIS 10901)."
New Behavior:
This problem is resolved.
This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2.

Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!

Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

ORA-06502 - Error when running "Ask The Expert 0.9"

Hi ,
I successfully installed "Ask the Expert" package with Apex 3.0 on Oracle 10g Database 10.2.0.1.0. No error ocurred during the import in my Apex environment.
Besides that, i'm having problems when i tried to run the "Aks the Expert". It always shows the following message errors:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
Error Unable to write activity log.
I think it was a problem with APEX instalation, but i could run the Sample Application of Apex without any problem.
I opened an SR in Metalink, but to my surprise, the analist of support don't know what's wrong with the demo "Ask de Expert".
The debug function of the application show the following commands before the error ocurrs:
0.01:
0.01: S H O W: application="103" page="1" workspace="" request="" session="6648566035252817"
0.01: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to -03:00
0.02: NLS: Language=en-us
0.02: Application 103, Authentication: CUSTOM2, Page Template: 667896385843019243
0.02: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
0.02: ...ok to reuse builder session for user:nobody
0.03: ...Application session: 6648566035252817, user=nobody
0.03: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
0.03: Session: Fetch session header information
0.03: ...Metadata: Fetch page attributes for application 103, page 1
0.03: Fetch session state from database
0.03: Branch point: BEFORE_HEADER
0.03: Fetch application meta data
0.04: Computation point: BEFORE_HEADER
0.04: ...Perform computation of item: P1_CLEAN_CRITERIA, type=FUNCTION_BODY
0.04: ...Performing function body computation
0.06: ...Session State: Save "P1_CLEAN_CRITERIA" - saving same value: ""
0.06: Processing point: BEFORE_HEADER
0.06: ...Process "Read and Write Activity Cookie": PLSQL (BEFORE_HEADER) declare l_cookie_id number; begin owa_util.mime_header('text/html', FALSE); -- ate_api.read_activity_cookie; l_cookie_id := ate_api.fetch_activity_cookie_val( 'COOKIE_ID' ); -- if l_cookie_id is null then l_cookie_id :=
Content-type: text/html; charset=ISO-8859-1 Set-Cookie: activity_ask_expert=1|2400346189796; expires=Wed, 01-Jan-2020 08:00:00 GMT; path=/;
0.06: Encountered unhandled exception in process type PLSQL
0.06: Show ERROR page...
0.06: Performing rollback...
Please, could any one help me to solve this problem ? Metalink couldn't help me diagnosing what's wrong.
Thanks,
Sergio Coutinho

Hi,
I don´t know if it help the analisis, but i collect some informations about my environment:
1) HTML DB version
3.0.1
2) Database version
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
3) Database server operating system (as well, if 32-bit or 64-bit)
Solaris 5.9 - 64 bits
4) Database Parameters:
PARAMETER VALUE
NLS_CALENDAR GREGORIAN
NLS_CHARACTERSET WE8ISO8859P1
NLS_COMP BINARY
NLS_CURRENCY $
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_DUAL_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_LANGUAGE AMERICAN
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_NCHAR_CONV_EXCP FALSE
NLS_NUMERIC_CHARACTERS .,
NLS_RDBMS_VERSION 10.2.0.1.0
NLS_SORT BINARY
NLS_TERRITORY AMERICA
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
Could it explain why ASK THE EXPERT is running on hosted apex site and it´s
generating error when running in my environment?
Thanks for the help !
Sergio

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

SQL serever 2012 Setup has encountered an error when running a windows installer file

I am trying to install SQL server 2012 Express on a windows 7 PC for 2 days now. I feel like banging my head against the wall.
I keep getting the following errors here's the full log
The following error has occurred:
SQL Server Setup has encountered an error when running a Windows Installer file.
Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer
to Help and Support for more information. HRESULT: 0x8007054F. Windows Installer file: C:\Users\Receno\AppData\Local\Temp\SQL Server 2012\Setup\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20150109_213740\SqlSupport_Cpu64_1_ComponentUpdate_1.log
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325

hmmm..so which hotfix do I apply ?
SQL Server 2012
All (Global) x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86

ORA-04062 error when running forms with different users

ORA-04062 error when running forms with different users
I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
I wrote a stored procedure to get the data from other user's tables.
When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
My Forms version is 6i with Patch 15.
Database version is 9.
Here is my stored procedure:
TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
TYPE Open_Curs IS REF CURSOR;
PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
Curs Open_Curs;
i NUMBER;
BEGIN
OPEN Curs FOR
'SELECT Seq_No FROM '|| User_Name ||'.scenario';
i := 1;
LOOP
FETCH Curs INTO Scen_Table(i);
EXIT WHEN Curs%NOTFOUND;
i := i + 1;
END LOOP;
END Get_Senarios;
I would be happy to solve this problem. It's really important.
Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)

I think it should be a better solution to create a package,
and put your own TYPES and procedure into it.
CREATE OR REPLACE PACKAGE PKG_XXX IS
TYPE TYP_TAB_CHAR IS TABLE OF .... ;
PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
END ;
Then in your Form :
Declare
var PKG_XXX.TYP_TAB_CHAR ;
Begin
PKG_XXX.P_XX( 'user_name', var ) ;
End ;

Error when running allocation logic

I am running the following allocation logic and get the following error:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM P_ACCT WHAT=CE0004010; WHERE=CE0004020; USING=CE0004030; TOTAL=<<<
*DIM ENTITY WHAT=A1000; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM TIME WHAT=2009.JAN; WHERE=>>>; USING=BAS(2009.TOTAL); TOTAL=<<<
*ENDALLOCATION
UJP_RULE_EXCEPTION:Missing [] on property name: WHAT=CE0004010. I get this error when executing the script using the program "UJK_SCRIPT_LOGIC_TESTER". I also get a similar error when running it via the data manager package.
Any thoughts on why this error is happening?

Hi Sanjay,
I think you are using formula property for any of the dimension member used in the Allocation logic.
FYI Allocation will not work fine for the dimension members which is calculated using the formula written in the formula Property.
There is no problem with your script it looks fine.
Hope this might help you.
Regards,
G.Vijaya Kumar

Gives an error when running lm in embeded way

Similar Messages

Maybe you are looking for