Giving access to other computers

I successfully configured the WRT54G and able to access wireless without any problem. Now I bought another laptop and I am not able to access internet wirelessly from new laptop. I entered the MAC address of the new laptop using the weblink of router using the old laptop but still not able to connect. Any advise will be greatly appreciated?

WEP is basically unsecure.
Turn off the Wireless MAC Filter. Disable it. It's useless. It won't make your network more secure.
Once disabled see if the other computer can access the wireless now.
Don't use WEP. Use WPA2-Personal with a good passphrase. That's secure.

Similar Messages

HT1178 What the difference is between WPA and WPA2 and how are these settings affecting the access of other computers to the internet through my Time Capsule

I have a Time Capsule of the 4th generation and I am pretty impressed since I just had a fried harddrive on my 3 month old Imac and Time Capsule restored it fully including all programs etc. without having me to put in all serial numbers etc. for that I give it an A+. However what I find very frustrating is the very short and incomplete user manual and setup instructions. I give those a D-. It does not explain the consequences of certain choices to a normel non computer gig user like me:
I do not understand what the consequences and difference is between the security setting WPA/WPA2 and WPA2 when setting it up. It would be helpful if the manual would explain something like: If you set it onto WPA2 then computers older than XXX years will not able to hook up to the internet through your router...or the likes, since I slowly supect this may be the reason for some of my troubles.
I also have a 5 year old PC with vista connected to the Time Capsule. It can wireless connect to the Time Capsule and access the printer (I have managed that after some painful hours...) but it cannot access the internet with that PC through the timecapsule wireless, only if I hook it up with a cable. Why? Does that have to do with the fact that I have set the TIme Capsule to WPA2?
Our PS3 can connect wireless, no problem. However, I friend of mine tried it with a quite new Toshiba Notebook and he could see the Time Capsule but again it shows the line from the Time Capsule to the internet blocked. All other computers linked with data cable to the Time Capsule are connected to the internet no problem. What have we done wrong? Should I change the security setting to WPA/WPA2?
I tried the latter, but then another problem does come up, which was there from beginning on: When I change the settings for my Time Capsule my Imac suddenly cannot find the Timne Capsule anymore, even so I am only 3feet away from it. When I set it up for the first time 3 month ago it drove me crazy. The very first time it found the Time Capsule right away. But when I discuverd a mistake in my initial setup and I went through the settings again to change stuff it suddenly could not find the Time Capsule anymore. Only after frustrating 20 times or so with turning wi-fi on and off several times inbetween did it suddenly find the Time Capsule in the set up menu. However, when I tried changing my security setting to WPA/WPA2 today to see whether this solves my other problems again it could not find the Time Capsule when I was finished with the settings and I had to give up/cancel. Why is that???
I would really appreciate some help here. But please I am not a computer gig and normally always had assistance with these things. On the other hand I am not all stupid either (even so these manuals assuming we all grew up sleeping on a computer make me feel stupid).....
Thank you all in advance

Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
- To use the TC as a router or as an external HD.
The difference between WPA and WPA 2 are:
- They are two kinds of internet connection.
WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
If you need any help or if you find some difficult setting up it you can contact Apple Support.
I am sure that they can help you with that.
I am sory for the delay. I holpe that you solve your issue.

Website appears on server, but can't access from other computers

I migrated from Server 10.5 to Snow Leopard Server. Used the migration tool to bring everything over from the previous box.
I can access the website via browser from the server, but can't access it from any other computers. I'm a decidedly non-geek type, so too many settings are gibberish to me. However, I at least ran the previous server for many years without problems.
Any clues as to what I'm missing?

What error message(s) are you getting from the remote web browser clients?
Exactly what string are you typing into the address bar of the web browser?
Are the remote clients on the same LAN as the web server, or on a remote network?
If running, is the firewall open for port 80 or port 443 for the web server?
Knowing a little more "gibberish" helps when you're running a server, too.

Since loading Firefox version 5 all my emails from talktalk have all become "undefined" and will not allow me to click onto open box. Only access from other computers with different browsers will. Problem with Firefox or problem with Talktalk?

I tried going to system restore, but could not open any pages at all after going to a system restore point. Had to reverse this as could not access anything at all then via Mozilla Firefox icon.

Hi David,
Thank you for your detailed question. It sounds like the real issue is pdf files. Are there any antivirus/firewalls that might be blocking this specific file type? or are there any preferences in your control panel that might be blocking this?
Do you have any stored preferences for PDF files in Firefox?
*[[Applications panel - Set how Firefox handles different types of files]]

I cannot access my emails through Firefox after having system changed from Mac to PC. I have reset the password but no luck. I get 'reason=failure'. I cannot access from other computers either.

I cannot access my emails from any work computer despite resetting password (original password unknown as before my time and had been 'remembered' in system so was always there).
== This happened ==
Every time Firefox opened
== Logging on after work done to change systems. IT person now gone.

Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Giving access to other users

every time i make a user and i log in to it, i can't edit any file on the terminal, it says i don't have permission
how can i change this?

If you make your users using "useradd" make sure you have the "-m" flag to it, in order to make it create your homedirectory..
If you don't use useradd, make sure you create the home directory and then chown it to your new user.
7/M

VMWare Fusion - Cannot see other computers in the Workgroup

For some reason I'm unable to see or access other machines in my Windows Workgroup from within Fusion 1.1.3. Alternatively, I cannot see or access the VM from other WinXP machines in my workgroup. The other WinXP machines in my workgroup CAN at least ping the VM. I cannot ping anything outside of the VM other than OS X and my gateway/router. And yes, I've tried disabling the firewall on both the VM and other Windows machines in my Workgroupto no avail.
I am currently using a Bridged network configuration in Fusion. If I open an explorer window in the VM and type in the UNC path to OS X I can access it, but not other Windows machines on my network... why?
Perhaps someone can at least confirm whether they can access/see other computers in their Workgroup from Fusion?
Maybe this simply isn't possible under Fusion and I'm just going around in circles here...
Thanks

How did you resolve this? I am about ready to toss my month-old macbook out the window over this.

How to access unread mails of all users in Exchange server without having Passwords and without giving mailbox access to other user.

Hi all,
I am using Exchange server 2013, my task is to create
Service , that
need's to monitor continuously for new mails of all Mailboxes in
my server. if any user got new mail i need to get that Mail Subject, Mail Body, Sender Email Address [From emailId] .
Limitation
: I don't have Passwords of mailboxes , so i gave all mailbox access permission to one user , then i completed this service using below code.
But now, Client
not willing to give Mailbox Permissions to one user because of security problems.
How can i do this without passwords and without giving permissions to other user ?
i don't want all mailbox access , i just need only
access Mail Subject , Body and Sender mail address .
How can i achieve
this ?
Process i follow
=> I created new user in server , and then i gave full permissions of all Mailboxes to newly created user[ex: james] in database level.
i use below command for giving permissions in database level.
Get-MailboxDatabase -Identity <Database Name> | Add-ADPermission -User <User> -AccessRights GenericAll
=> using below code i am searching unread mails of all user Mailboxes and then getting Subject, body and Sender Email address . here i am have list of users,
ExchangeService service = new ExchangeService(ExchangeVersion.Exchange2013);
service.Credentials = new WebCredentials("[email protected]", "password");
service.AutodiscoverUrl("[email protected]"); foreach (Object obj in usersList) // here i have Mailbox users list in usersList
{ var userMailbox = new Mailbox(obj.user);
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
SearchFilter.IsEqualTo filter1 = new SearchFilter.IsEqualTo(EmailMessageSchema.IsRead, false);
var itemView = new ItemView(50);
var userItems = service.FindItems(folderId, filter1, itemView);
foreach (var item in userItems)
item.Load();
var senderEmail = ((EmailMessage)item).From;
var subject = item.Subject;
var body = item.Body;

You would need to check that possibilities via WebServices but suggest you to post this in Development forum to get help from programmers....
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=exchangesvrdevelopment
Blog |
Get Your Exchange Powershell Tip of the Day from here

TS1389 i have more than 5 computers authorized through my apple id, what could i do if i have no access to the others computers?

hey, i have a big problem, i cant authorize my computer because i have more than 5 computers authorized with my apple id, the roblem is that i have no access tot ce other computers to deauthorize them, what could i do?

Use the Deauthorize All command documented in this article.
(75434)

I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

I assume these are POP accounts and all computers are set to remove from Server after downloading.
So on the non dominant ones... Mail Preferences>Accounts, highlight an account, Advanced tab, uncheck remove from Server, just have the main dominant one remove from server.
Or get/setup IMAP accounts.

When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to access the printer. Any thoughts?

When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem? My printer does not have on-board Wi-Fi but, otherwise, works fine. I shouldn't have to buy a new one. Is there a OS patch out there that would open the printer port for my PC computers?

I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected? That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
How is your network configured? Bonjour as a protocol will NOT cross a router boundary. If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router. If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation. The additional routers must be put into bridge mode, which is done differently depending on the router. But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows.

I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer.

I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets on the network have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer. Yet Network control panel says I am connect to the modem, and Network Diagnosis says I am connected to the Internet. It's like the blind man who has eyes that cannot see. BTW, I am not some newbee. I have been a Machead since the early nineties and set up a half dozen networks, including the one I am using at home to which the iMac mysteriously is there but not. This has me stumped! I am considering going back to 10.7!

Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
Configure IPv4
IPv4 Address
Subnet Mask
Router

Put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

i just purchased a file that had videos in it. i put them in the itunes library on my pc where i first downloaded them. i was able to transfer them to my other pc, a laptop, through my home network. i am now trying to get them on my mac pro desktop and my ipad2. my mac pro can see the other computers on my home network but i cannot get it to connect to them. i know the operating systems are different but was hoping i could transfer pictures and files from pc to mac this way. haven't been able to get it to work yet. the videos i am trying to get my mac to see came in a folder with both mac and pc versions. i thought if i got the videos i purchased into itunes that i would then be able to get them to my mac pro and my ipad2. i am new to mac/apple and have always been pc-centric so trying to marry it all has been difficult. i speak pc pretty well but am just learning apple. am i trying to do things that are not possible? i sure could use a knowledgable friendly soul to walk me through my issues of having pc and mac on the same network. i have been able to get all computers and ipad to print on my network. thanks.

Why can't I access my mac pro from other computers

I can't seem to access files from my Mac Pro from other computers on our network. It asks for a username and password, which it says is always incorrect. Any ideas on how to fix this? We have two main workstations that need to access a single Fire Wire 800 DRobo array that's connected to the Mac Pro tower.
Thanks!

File Sharing must be enabled on the Mac Pro. in System Preferences > Sharing
System Preferences > Accounts > Guest account must be present and must allow File Sharing, but need not allow guest login.
Although the login pane appears on the screen of the second computer, the login it is asking for is an account and password that is valid on the Mac Pro (the computer whose files you want to share). The number of bullets in the password field is fixed -- it has no idea how long the password is. Passwords are case sensitive.

Can other computers plug into a macpro to access the internet?

a friend of mine has two macs, a mac pro and a macbook pro.
he wants to access the internet on both computers, (wired DSL)
if he uses his dlink router, the connection is much slower than if he plugs the internet directly into the macpro.
is there a way his macbook pro can plug into the macpro, with its two ethernet jacks, so the portable can access the internet?
we tried it, but it didn't work. Internet sharing was on in the sharing preferences.

At my old workplace I had a G5 with two ethernet cards, a network switch, and a few other computers wired through it. I'm almost positive that I was able to share my connection in the manner that you described. I think that it didn't work right away for me, either, and I had to do some tinkering, but it worked.
Part of the reason why it didn't work was because it was short-lived: our IT department was not happy about having multiple devices connecting through one ethernet jack, and using this method they could see that there were multiple, individual machines on the line (source ID for network requests was different, or some such thing).
My solution - which would also fix your friend's problem - was to turn my G5 into a Squidproxy server. This basically causes your G5 to hand out the IP's to the systems connecting through it, and it forwards on all traffic to and from the computers behind it. As far as I know (based on the fact that the IT department was quiet after I set that up) it'll mask the computers behind it.
Squidproxy is free, but setting it up can be a bit of a chore if you're not familiar with it. It may be an overkill solution, but it'll definitely get the job done.

Giving access to other computers

Similar Messages

Maybe you are looking for