Giving away the following programs.

So I got a free intel starter pack that I don't plan on using. The following programs are up for grabs....
Post below for the program you wish to take.
One program per person, per 24 hours. After 24 hours of requesting a program, you may make another request till I run out of programs.
I only got ONE key for each of the following programs. So if someone requests a program, don't bother asking for the same program.
PowerDirector 12 Deluxe
PhotoDirector 5 Ultra
PowerDVD 13 Deluxe
YouCam 5 Standard
Total War: Rome II
Star Chart
Snowflake Entertainment Edition

indest wrote:
Can't edit my main post anymore, so folk please note the following programs still available:
YouCam 5 Standard
Total War: Rome II
Star Chart
I just realized I got a key for Civilization, a stream game..... Rome II is gone already..... what is left i:
YouCam 5 Standard
Star Chart
Civilization

Similar Messages

Need some clarification in the following programs

Hi ABAPers
I am learning ABAP programming. I am having some doubts in some programs which are there in the book TEACH YOURSELF ABAP/4 in 21 Days.
I hope you will clear all my doubts
1)     when I execute this program it is giving me error message and I am unable to resolve the error in it.
I dont remember the error message but it is something related to data conversion.
Listing 9.5 Variables Filled with Characters Other than Blanks or Zeros Using the WITH Addition of the CLEAR Statement
1 report ztx0905.
2 tables ztxlfa1.
3 data: f1(2) type c value 'AB',
4       f2(2) type c,
5       f3    type i value 12345,
6       begin of s1,
7           f1(3) type c value 'XYZ',
8           f2    type i value 123456,
9           end of s1.
10 write: / 'f1=''' no-gap, f1 no-gap, '''',
11        / 'f2=''' no-gap, f2 no-gap, '''',
12        / 'f3=''' no-gap, f3 no-gap, '''',
13        / 's1-f1=''' no-gap, s1-f1 no-gap, '''',
14        / 's1-f2=''' no-gap, s1-f2 no-gap, '''',
15        / 'ztxlfa1-lifnr=''' no-gap, ztxlfa1-lifnr no-gap, '''',
16        / 'ztxlfa1-land1=''' no-gap, ztxlfa1-land1 no-gap, '''',
17        /.
18 clear: f1 with 'X',
19        f2 with f1,
20        f3 with 3,
21        s1 with 'X',
22        ztxlfa1 with 0.
23 write: / 'f1=''' no-gap, f1 no-gap, '''',
24        / 'f2=''' no-gap, f2 no-gap, '''',
25        / 'f3=''' no-gap, f3 no-gap, '''',
26        / 's1-f1=''' no-gap, s1-f1 no-gap, '''',
27        / 's1-f2=''' no-gap, s1-f2 no-gap, '''',
28        / 'ztxlfa1-lifnr=''' no-gap, ztxlfa1-lifnr no-gap, '''',
29        / 'ztxlfa1-land1=''' no-gap, ztxlfa1-land1 no-gap, ''''.
according the book the output should be
The code in Listing 9.5 produces this output:
f1='AB'
f2=' '
f3='    12,345 '
s1-f1='XYZ'
s1-f2='   123,456 '
ztxlfa1-lifnr='          '
ztxlfa1-land1='   '
f1='XX'
f2='XX'
f3='50,529,027 '
s1-f1='XXX'
s1-f2='1482184792 '
ztxlfa1-lifnr='##########'
ztxlfa1-land1='###'
can you please explain me this program.
2)     This program is giving me the following error message at line 7.
ALPHA AND IT-F1 ARE TYPE- INCOMPATIBLE.
The program is as follows.
Listing 12.9 Deleting Rows from an Internal Table Can also be Done Using the delete Statement
1 report ztx1209.
2 data: begin of it occurs 12,
3            f1,
4            end of it,
5            alpha(12) value 'ABCDEFGHIJKL'.
6
7 do 12 times varying it-f1 from alpha0 next alpha1.
8      append it.
9      enddo.
10
11 loop at it.
12     write: / sy-tabix, it-f1.
13     endloop.
14
15 delete it index 5.
16 skip.
17 loop at it.
18     write: / sy-tabix, it-f1.
19     endloop.
20
21 delete it from 6 to 8.
22 skip.
23 loop at it.
24     write: / sy-tabix, it-f1.
25     endloop.
26
27 delete it where f1 between 'B' and 'D'.
28 skip.
29 loop at it.
30     write: / sy-tabix, it-f1.
31     endloop.
32
33 loop at it where f1 between 'E' and 'J'.
34     delete it.
35     endloop.
36
37 skip.
38 loop at it.
39     write: / sy-tabix, it-f1.
40     endloop.
41
42 read table it with key f1 = 'K' binary search.
43 write: /, / 'sy-subrc=', sy-subrc, 'sy-tabix=', sy-tabix, / ''.
44 if sy-subrc = 0.
45     delete it index sy-tabix.
46     endif.
47
48 skip.
49 loop at it.
50     write: / sy-tabix, it-f1.
51     endloop.
52
53 free it.
And the out put according to the book is as follows
The code in Listing 12.9 produces this output:
         1 A
         2 B
         3 C
         4 D
         5 E
         6 F
         7 G
         8 H
         9 I
        10 J
        11 K
        12 L
         1 A
         2 B
         3 C
         4 D
         5 F
         6 G
         7 H
         8 I
         9 J
        10 K
        11 L
         1 A
         2 B
         3 C
         4 D
         5 F
         6 J
         7 K
         8 L
         1 A
         2 F
         3 J
         4 K
         5 L
         1 A
         2 K
         3 L
sy-subrc=     0 sy-tabix=          2
         1 A
         2 L
How to rectify the error in this program.
3)     In this program I want to ask is there any way that I can be able to see the write statement output which is there in the initialization event block. If yes then how .
(Note I dont want to remove the paramter (selection screen) statement.)
Listing 18.13 Explain the Sequence of Events That Occurs in this Program
report ztx1813 no standard page heading.
ztx1813 data: flag,
      ctr type i.
parameters p1.
initialization.
flag = 'I'.
write: / 'in Initialization'.
start-of-selection.
flag = 'S'.
write: / 'in Start-Of-Selection',
         / 'p1 =', p1.
top-of-page.
   add 1 to ctr.
   write: / 'Top of page, flag =', flag, 'ctr =', ctr.
   uline.
4) can anybody please mail me some exercise program queries ( right from the basic to complex one) on this mail id [email protected] or else u can give me the url of the website which contains such program.
EARGERLY WAITING FOR UR REPLIES
Regards,
maqsood

Maqsood,
I had tested all your programs and I am getting the correct output. I didnt get any error message and I didnt do any changes. I just copied your code and executed it.
To your Q3, I can say...INITIALIZATION is used only to assign values to variables. It is not used for output.
Only the start-of-selection and top-of-page will be printed.

TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networ

My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.

Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time

The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

Try below steps once
click Gear icon on the top Right corner and Quit Creative Cloud App
Click on Finder and then hold Command + Shift + G keys on your keypad
It will open Go to folder window, type exactly ~/Library and click on Go
Make sure to open ~/Library not /Library ( there will be two Library folders )
Then open Application Support > Adobe folders
Trash AAMUpdater and OOBE folders.
Then launch Creative Could and check.

How to I get rid of pop up user account control "do you want to allow the following program to make changes to your computer" I have windows 7 professional.

I keep getting an annoying pop up the says "User Account Control" "Do you want to allow the following program to make changes to your computer"
== This happened ==
Every time Firefox opened
== Two days after I downloaded Firefox and set as my default browser.

Check that you do not run Firefox as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
In the Compatibility tab, make sure that Privilege Level: "Run this program as Administrator" is not selected.
You also need to check the Properties of the firefox.exe program in the Firefox program directory.
If you can't make the changes then you need to start Windows Explorer as Administrator.

Why itunes 10.5 64 bit wont install on my 64bit hp probook ? when i run it my user account control asks me that do you want the following program from unknown purblisher to make changes on you on this computer? program name :itunes 64setup.exe purblishe

why itunes 10.5 64 bit wont install on my 64bit hp probook ? when i run it my user account control asks me that do you want the following program from unknown purblisher to make changes on you on this computer?
program name :itunes 64setup.exe
purblisher:unknow
file location: hard drive on this computer when i click yes nothing happens
aditional ateps iv taken, uninstalled all itunes including quick time,banjour mobile updates ,everthing that has to do with apple products.went into window regestry and i dint find anything that has to do with apple in software bar
restarted my laptop several times, put the setup on a External USB but still nothing happens ,blowsed all most all sites on goggle no where iv seen this problem ,pliz who can help?

why itunes 10.5 64 bit wont install on my 64bit hp probook ? when i run it my user account control asks me that do you want the following program from unknown purblisher to make changes on you on this computer?
program name :itunes 64setup.exe
purblisher:unknow
file location: hard drive on this computer when i click yes nothing happens
aditional ateps iv taken, uninstalled all itunes including quick time,banjour mobile updates ,everthing that has to do with apple products.went into window regestry and i dint find anything that has to do with apple in software bar
restarted my laptop several times, put the setup on a External USB but still nothing happens ,blowsed all most all sites on goggle no where iv seen this problem ,pliz who can help?

"Do you want to allow the following program to make changes to your computer?" I get this message in a box everytime I open firefox. I answer "Yes" but it continues. Please help.

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/856850]]</blockquote>
"Do you want to allow the following program to make changes to your computer?". I get this message everytime I open Firefox. I select "Yes" and then the program opens. However, I continue to get this question everytime I open firefox. Please help.

Can anyone answer my question?

After downloading iphone pictures to desktop, itunes won't open. I downloaded itunes 10.6 (64bit) but get "Do you want the following program to make changes to your computer?" Apple Inc. I've clicked "yes", restarted the computer, and still no luck.

after downloading iphone pictures to desktop, itunes won't open. I downloaded itunes 10.6 (64bit) but get "Do you want the following program to make changes to your computer?" Apple Inc. I've clicked "yes", restarted the computer, and still no luck.

I also have the same problem, but the Software Updates tool doesn't recognise that Quicktime is out of date. Have you tried downloading Quicktime 7.7 Leopard from http://support.apple.com/downloads/#quicktime as this worked for me...?

"Do you want to allow the following program..." Message

After installing iTunes 9.2 on my Windows 7 (64bit) laptop, every time I attempt to open iTunes it gives me a message asking "Do you want to allow the following program to make changes to this computer?". Clicking yes leads the programme to open, but the message appears every single time upon opening.
Also, when iTunes is minimized to the task bar, it will not open and maximize, and doesn't appear as one the applications running on the task manager and must be shut down through the processes.
I have uninstalled all Apple software and reinstalled iTunes multiple times as well as moved all my music off my computer.
Any ideas on a solution?

Many thanks. I think we'd better try rebuilding your iTunes preference files in the account that is getting the errors.
For the basic technique, see the *Remove iTunes Preference files* section of the *User-specific troubleshooting* section of the following document:
[iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues|http://support.apple.com/kb/TS1717]
*Prior to doing the preference file rebuilds:* Best to make a note of any custom preferences you have set up for your iTunes. (Rebuilding pref files returns preferences to their defaults ... so you'll likely have to set some of those custom preferences up again from scratch.) Also make a note of any third-party plugins/add-ons you have installed. You may have to reinstall those after the rebuilds.
*Things to watch out for during the rebuilds*
Rebuilding the preference files in the \Local\ location causes the iTunes license agreement to run. So you'll need to agree to that again.
Rebuilding the preference files in the \Roaming\ location causes the iTunes Setup Assistant to run. When prompted to do so, *do not* add files to your iTunes library. (Otherwise you'll end up with a library full of duplicates.)
... are those measures of any help with the launch error and the maximising troubles in your usual user account, sana?

"Do you want to allow the following program from an unknown publisher to make changes to this computer?" I mean....what would you do? Is it safe to click yes....(Don Don Don...*sound effect*)..please help...

Okay everybody...so I'm on the struggle bus so I'm going from Photoshop cs6 off my old broken laptop to trying to dwn Photoshop Cs2...either way I love PS. Now when I tried downloading it for free from Adobe...succeeded...but when I went to the download folder to install it, it said "Do you want to allow the following program from an unknown publisher to make changes to this computer?" I mean....what would you do? Is it safe to click yes....(Don Don Don...*sound effect*)..please help...

If you already have a license for photoshop cs6, why do you want photoshop cs2?
You can just install photoshop cs6 on your new computer provided both operating systems are the same kind (both mac or both windows)
If you don't have an install dvd for cs6, you can download photoshop cs6 from here and use your serial:
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

Every time I try to log on I get: "Do you want to allow the following program to make changes to this computer?"

A few days ago I started getting the following message EVERY time I try to log on:
"Do you want to allow the following program to make changes to this computer: It lists FF and Mozilla Corp.
I have to click "Yes" EVERY time and then it my Comcast homepage appears.
I have a PC using Windows 7.
In addition, when my homepage does appear, the 3 little icons in the upper right do not appear. (Minimize, X)

A possible cause of this error is that Firefox is set to run as Administrator.
Check that Firefox isn't set to run as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
* Privilege Level: "Run this program as Administrator" should not be selected
* "Run this program in compatibility mode for:" should not be selected
Also check the Properties of the firefox.exe program in the Firefox program folder (C:\Program Files\Mozilla Firefox\).

When I open firefox, a pop up window asks "do you want to allow the following program to make changes to this computer? How can I get rid of this pop-up window ?

Every time I open the browser, a pop-up window asks "Do you want the following program to make changes to this computer?"
It is unnecessary and annoying to have to click "yes" each time.
How can I get this pop-up window to stop?

Thanks for the help I'll keep the info just in case - but I got so frustrated that I just deleted the program and then re downloaded the current version now everything works fine.

How do I get rid of 'Do you want to allow the following program..."?

I have recently installed Windows 7 on a new computer and have also installed Dreamweaver MX.
Whenever I open Dreamweaver, it comes up with an annoying message "Do you want to allow the following program to make changes to this computer?"
My question is this - how can I get Windows 7 to recognise Dreamweaver MX so that this message does NOT come up anymore?
Or do I have to upgrade my Dreamweaver to the latest version (probably quite expensive).
To see a screenshot of a similar message, see this thread:
http://www.sevenforums.com/general-discussion/14310-how-get-rid-do-you-want-allow.html
Thank you

chuckee wrote:
Or do I have to upgrade my Dreamweaver to the latest version (probably quite expensive).
Thank you
As Murray stated, it's been about 8 years. Adobe only allows you to upgrade from the previous 3 versions. Right now they are on CS5 (11) which means you can upgrade from Dreamweaver 8 which is 2 versions after yours. So you would have to buy the full version again. Buying the upgrade is no longer an option.

How do I get rid of "do you want to allow the following program to make changes to this computer"?

I recently installed Adobe Acrobat 8 Professional and every time I open a PDF file that is stored on my computer, I get a pop-up that asks "Do you want to allow the following program to make changes to this computer?". How do I get rid of this? I don't want to change my security settings, I just want to open pdf's without having to go through this step.
I'm using Windows 7.

Thanks for that good idea. I checked the "properties" by right clicking on the AA8 icon and under "compatability" I noticed it had Windows XP (Service Pack 3). Since I'm running Windows 7, I changed it to that and now I don't get that annoying pop-up!

Recurring message "Do you want to allow the following program to make changes to this computer"

Operating System: Windows 8 Printer: HP Photo Smart 6520 e All-In-One Whenever I click on the icon on the desktop I get "Do you want to allow the following program to make changes to this printer" if I click yes the connection setup window pops up to choose a connection, I have already choosen a connection for my PC, laptop and tablet and everything works. How do I fix this its becoming annoying. Thanks

You need to change the security level in Windows 8. Microsoft issue.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Giving away the following programs.

Similar Messages

Maybe you are looking for