Giving iBook to relative - How do I reset the entire system?

I am giving my old iBook to a relative. I ran the harddrive up to near capacity with music and graphics files. I really did not add too many programs besides Office and Photoshop Elements. I would like to keep all the apps, but permenently delete all the files, settings, passwords and such associated with me.
I assume there is a very easy way to do this, could someone point me in the right direction?
Thanks!

Phil:
Here are a couple of other options:
1. You now have a new Admin Account with the old computer shortname. You can change that with Changing the Short Username in Mac OS X.
2. This method posted by Kappy.
This is the simple method and doesn't involve erasing the hard drive.
Boot from your OS X Installer. After the installer loads select Disk Utility from the Installer menu (or Utilities menu if using Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Next, boot to single user mode. Restart the computer and after the chime press and hold down the COMMAND-S keys until the computer starts up to a black screen with white type.
3. At the prompt, type the following commands, each command followed by the Return key:
/sbin/fsck -yf
mount -uw /
rm /private/var/db/.AppleSetupDone
shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when you reboot, it will send you through the Startup Wizard.
Good luck.
cornelius

Similar Messages

  • How can we reset the   active system status  when we are trying to change

    Hello SAP,
    I am using the transaction  code 'CJ20N' .
    For this transaction code, I need to put one validation when user is trying to change the system status to 'TECO'.
    Once, user changed the system status  and trying to save , we need to put the previous system status.
    For e.g. : system status is 'REL'. Now user set to 'TECO' and CLICK on save button, system status  need to change 'REL'.
    Could you please explain me that how can we delete the buffer system status 'TECO' and reset to active status 'TECO '.
    Thanks and Regards
    Srini

    You can't delete an account, you can only stop using it.  If you're getting that error message you won't be able to create a new account on your device.  Your only options are to re-use one of the accounts previously created, or create a new account on a different iOS device or Mac (running OS X Lion or higher), if you have one.

  • How do I restore the entire system from a Time Machine external drive?

    Hello everyone,
    Up front - I have searched through numerous threads but have not yet been able to solve my problem - even though it is presumably easy for many.
    So... I had to bring in my late 2009 27" iMac to Apple to replace the hard drive - mine was one of the thousands affected by the defective Seagate 1 TB disk recall. I was told that the disk would be cloned, but nevertheless I made a full system backup with Time Machine to a dedicated external hard drive.
    A week later and I now have my iMac back - but when I boot, I only see a white screen with a pointer, so it appears that the drive was not cloned - but that I now have a blank 1 TB disk, correct?
    I have also tried booting with the external drive attached, thinking that the dedicated Time Machine external drive would allow me to boot directly from it and restore the system if need be - I booted with CMD+R, tried again with ALT ... no luck.
    And I cannot find my Mac OS DVDs...
    So... is the drive blank, or am I missing something here?
    If so, how can I boot from the external Time Machine drive, or is that not possible either?
    Any pointers greatly appreciated, thanks very much in advance.

    Call Apple to get replacement DVDs > http://support.apple.com/kb/HE57
    1. Insert the Mac OS X DVD and press C key while your computer is starting.
    2. Go to Utilities menu and restore the backup.
    You should have made a clone instead of the backup because Apple gives the hard disk without OS X

  • How can i backup the entire system ?

    Hi everybody,
    I'm running osx lion and plain to install windows 7 x64 running via bootcamp.
    Everybody knows, it takes a hughe times to tweaks boh systems and install all applications that we need.
    I would like to know if there's a tool that could allow me to do a full backup with osx lion partition and bootcamp partition with windows 7 into a single one image ?
    Many thanks in advance.

    There's no single app that will do both.
    Time Machine (you might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions) or one of the "cloning" apps will do your OSX volume fine. 
    I don't do Windoze, but understand the WinClone app (about $20, I think) has been upgraded and should handle the Bootcamp partition.

  • Bought a second ipad.  How do I reset the first one for my wife?

    My wife has different interests than I.  The books I have on my IPAD are of no interest to here and the games she plays are of no interest to me.  How do I reset the user name on the one IPAD to be hers?

    As long as shes signed in to her Apple ID on her iPad, if she goes to the iBooks app and then to the Store, there should be a section labeled Purchased there, and then she can download the book she wants straight to her iPad since she already puchased once and is authorized to download it to any other iOS device.

  • How do I reset the e-printer's web embedded server network password?

    I have an HP Photosmart 7520 e-all in one. I use Windows 7.  I could tried to set a password in the EWS network tab. I could not change the user name so it remains "admin". I set the passwork and it seemed ok. But when I tried to log on again, it would not let me in. How do I reset the network password?

    I recommend that you run "Restore Network Defaults" from the front panel and then run the wireless setup wizard again.  This will wipe out all your network settings.
    SandyBob
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP
    1-800-474-6836

  • Can't Open File Explorer -- How can I reset the Quick Access Toolbar from outside of File Explorer?

    First of all, this is not a virus. This is my a bug within windows explorer itself.
    So, I added the properties button to the QAT, and it displayed it as an expandable menu, like this: ";" but with small arrows like this: ">". didn't want this, I wanted to click on it and immediately display the properties of the file
    to me. So, I hovered over it, right-clicked on "Properties" in this menu and added it to the QAT. Of course, this crashes File Explorer. Now whenever I try and open it, it crashes, so I have to assume that the corrupted button has been saved.
    So, my question is: How do I reset the QAT from OUTSIDE of file explorer? Regedit magic? Any ideas?
    Thanks for stopping by,
    Trolleyman.
    Edit: Just so you know, I can navigate through my systems files using the 7-zip file manager. Phew.

    Thanks from me  too, Niki. This first happened with Windows 8.0 File Manager a week ago,, and despite much research I couldn't  discover the cause so eventually I resorted to restoring  the system drive from backup (luckily I make daily backups, 
    so didn't lose   much  work).
    Without  knowing the cause  a  few days later I again tried to alter  the Quick Access  Toolbar  and the problem reappeared.  Should  I again resort to restoring the entire system drive, the thought horrified me. But
    luckily while doing a bit more research prior to resorting to the same drastic recovery, I cane  across this post  of yours and it worked!
    It doesn't  seem  to be  happening with Office 2007's   or  Wordpad's  Quick Access Toolbar,  so presumably it's a File Explorer bug  (a.k.a. Windows Explorer in Windows 7, of course). Have Microsoft recorded this as
    a  bug -- if not,  why not  -- and when  are they coming up with a fix?

  • I am having a Startup problem. Someone comes on the screen with Open Firmware to Startup. How can I reset the PRAM myself to solve this problem?

    I am having a Startup problem. Someone comes on the screen with Open Firmware to Startup. How can I reset the PRAM myself to solve this problem?

    Read these.
    http://support.apple.com/kb/HT1431
    http://reviews.cnet.com/8301-13727_7-10330118-263.html

  • How do I reset the password that allows me to download reader - I worked with chat help - we rest my password and I can get into my adobe account but when I try to download reader and work my way through the process when I get to the password it will not

    How do I reset the password that allows me to download reader.. I worked with chat help two hours last night - we have reset a password that lets me into my adobe account but in the download reader process that password will not work - where it says Adobe reader wants to change something and please type in password, just vibrates with the dots glowing purple but will not open…. what do I do to reset that password or get it to function. they would not assist me further they said its a free download and I would need to seek help from forums ( all this is new to me )
    so "forums" help…what do I do ?
    thank you
    PL

    patricia here again:
    I am the system administrator - personal computer
    I have been able with your lead to find the password I need , and to have install happen
    however - when I then go to the website to download the Pdf document I need I get a screen with the big red adobe icon that says to complete and down load this document I must launch adobe reader a dn sign the terms of agreement , close browser and reopen.
    but thatscren has no choice buttons whatsoever, I cannot find anywhere a adobe reader image to launch - been into launch pad , preferences etc.
    so now the loop is the pdf document and the adobe screen saying I must do terms of agreement
    like is this Kafka like or what ...
    suggestions?
    thanks
    P.

  • ICloud accidentally set-up with erroneous email acct. How do I reset the email originally used to start the Apple ID? I'm stuck in a loop...

    Hi Apple friends! Here's my frustrating situation. When I got the new computer (2012 Macbook Pro), I tried to set up iCloud but accidentally input an erroneous email acct. I cannot access iClod because the email was accidentally input as "[email protected]", not "[email protected]". How do I reset the email originally used to start the Apple ID? I'm stuck in a loop, and not only cannot use iCloud, but I keep getting messages popping up to register my iCloud with a non-existent email...
    Help?
    Sincerely,
    Cole
    [email protected]

    Have you tried to go into System Preferences > iCloud and entering the correct information there? You will first have to "sign out" of the wrong account and then log in with the correct information.
    If that does not work you should direct follow up to the iCloud for Mac forum.

  • I forgot my security code and my rescue email has been deactivated how do i reset the rescue account remember i do not remember the security codes

    I forgot my security code and my rescue email has been deactivated how do i reset the rescue account remember i do not remember the security codes

    You need to contact Apple to get the questions reset; this can be done by clicking here and picking a method for your country, or if that's not an option, by filling out and submit this form.
    (95840)

  • How can I reset the settings for my Ipod Video on the Ipod source list.

    I accidentally choose the 3rd option (do not update video) on the Ipod option button >>> video <<< and for that reason I can't download or play video. How can I reset the setting in order for me to enable to update my Ipod for the videos manualy.
    I open itunes and select the Ipod in the source list, then click on the option button and click video. But from there, I can't select the options... please advice ASAP, Thanks...<br>
    Pentium iii   Windows XP   Desktop

    Read this and see if it helps:"Syncing videos to your iPod" http://docs.info.apple.com/article.html?artnum=302509

  • How can I reset the number authorized Macs in my account?

    How can I reset the number authorized Macs in my account? Two old Macs that I no longer have are still authorized, which leaves me with three working macs at home.

    Hello Joe
    You will find your answer on this page. In summary you have to deauthorize each of the 2 Macs on the Mac thenself. If it's no longer possible, then you have to deauthorize all five Macs and then reauthorize each 3 remaining
    http://support.apple.com/kb/HT1420
    Bye

  • I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software

  • My imad 'lol' mini  say i set up an icloud account when i first got it and its been disabled everytime i try to reset it it prompts me to a different email how can i reset the origanal

    my imad 'lol' mini  say i set up an icloud account when i first got it and its been disabled everytime i try to reset it it prompts me to a different email how can i reset the origanal

    Hi JackEDupdog,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with your Apple ID:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Cheers,
    - Judy

Maybe you are looking for

  • Converting to text/xml

    Hi, I get this error in sxmb_moni: "Delivery Exception: invalid content type for SOAP:TEXT/HTML." I have set the ContentType with the messageTransformBean in the SOAP receiver adapter. but I also need to set parameter "Do not use SOAP envelope", add

  • Replacing linux with os 10.3

    I have a second hand g5 iMac that was surplussed by a local university. It is running yellow dog linux 6.1. I have neither the time nor inclination to figure out how to get things done in linux, I just need a family computer. I purchased os 10.3 to r

  • Non-application exception occurred while processing method createReportsExc

    Hi, Any one get the following exception Non-application exception occurred while processing method createReportsExcelFile on bean BeanId(bsd#bsdejb.jar#ReportsDownload, null): java.lang.NoSuchMethodError: java.lang.RuntimeException: method <init>(Lja

  • How to become a developer

    Hi guys im having trouble with activation error on my iphone 5 it is not jailbrake its full unlock but i dont understand why i keep having that problem Help me please

  • Embedded Java code with bpelx:exec

    When I embed Java code with bpelx:exec, I would like use classes packaged in a jar file. How do I ensure that the jar file is deployed with the suitcase? I tried adding the library to the JDeveloper project (right-click project, choose properties, li