Giving iPod with audio as a gift... how to?

I produce radio commercials, and I want to give a cleint ad ipod loaded with all his spots as a gift. BUT -- how can I do this in a way that doen't tie the iPod to my computer, and thus erase/overwrite the commercials on the iPod when he connects the iPod to HIS computer?

Bryan Mick wrote:
You could load them onto the iPod in Disk Mode.
Your client will then just have to move that content to his computer & load it back onto the iPod via iTunes.
Cheers!
-Bryan
Thanks... that's a possibility. But my client isn't the most savvy when it comes to things like this, and I'd rather have the gift be complete (and with that "cool, all my stuff is on here!" wow-factor) when I put it into his hands. Any other ideas out there?
- Rich

Similar Messages

  • I have the old ipod touch without the camera and i received a new one with camera as a gift how do I transfer eveything to new ipod from old?

    I have the old ipod touch(without camera) and I received the new one (with camera) as a gift. How do I transfer everything from old one to new one?

    Make one final USB sync with the old iPod. The sync includes a backup. Then connect the new iPod to the same computer/iTunes library and restore from the backup of the old iPOd. All the synced media like apps and music have to be in the iTunes library since synced media is not included in the backup that iTunes makes. For how to restore see:
    iTunes: Backing up, updating, and restoring iOS software

  • Mts files cannot imported with audio in pro cc6. how i can import mts files with audio?

    when i am importing mts files in pro cc6. every time it is being imported without audio. though original mts files have audio. how can i import mts files with audio in cc6?

    To clarify Media Browser suggestion - very important that you copy ALL content from SD card to hard drive before importing using Media Browser. If you only have the .mts files alone, there is stuff missing that is needed for Premiere to properly interpret the video/audio.
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Loading my NEW ipod with audio, vidio, and games after disguarding the OLD

    More to the point I would like to know if there is any way for me to compare what is allready on my ipod with whats on in pc's iTunes library short of leting it auto sinc?
    I know I can open two windows in iTunes, one my library and one my ipod but im thinking there must be an easier way, including third party software?
    Thanks
    Intel Piii   Windows XP Pro  

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Cut section of footage with audio out of timeline - HOW??

    Hi I've tried to select a middle section of my timeline and cut it out and have the two sections join - how do I do this? I've tried cutting the back end and pasting over the middle section, but it will NOT overwrite the audio. Video will overwrite but it does not lay audio over with it.
    I've Tried using Extract audio when using "Paste over at Playhead" checked and not checked. It doesn't work either way. any help please?

    Hi dsafian - if I understand you correctly, removing a section is simple, but there are two scenarios and you do not give enough detail for us to know which one to describe, so here's both:
    1. Cutting a section out of a single clip: there is more than one way, but here's one. Place the playhead at the start of the part you want to remove and hit Command-T. That will split the clip at that point. Now go to the end of the unwanted part, and do the same. Then select the middle part and hit 'Delete'.
    2. Removing several clips: Select the first clip you want to remove, and then Shift-Click on the last clip to be removed. this will select all of the clips that you want removed. Now hit 'Delete'.
    Does that help? Tell us if we have misunderstood your problem.

  • I just bought a new MacBook, but have an iPod with music on it. How do I get to my iTunes?

    How do I copy all my music to my iTunes, even those songs I didn't purchase outright?

    See this older post from another forum member Zevoneer on different ways to copy music from your iPod to your PC.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Dead ipod with unsynched music and movies, how do I get the music and movies onto new ipod

    my old ipod died before i was able to sync the latest purchases to my computer.  How do I redownload purchases to new ipod

    If the iPod is dead and you never synced it and you have no backup, say "bye-bye" to the contents.
    You can individually download the apps and songs from iTunes without charge provided that you use the same Apple ID.

  • How do I connect an iPhone 5S or 6 with audio video cables?

    How do I connect an iPhone 5S or 6 with audio video cables? Our van only has these connections. Apple did have a cable that worked with the 4/4S, but it does not work with an adapter on the 5S. I want audio only.

    I Thought I probably was.
    something like this should work then, right?
    Belkin Y Audio Cable (12 foot) https://www.amazon.com/dp/B000067RBT/ref=cm_sw_r_awd_fYWzub11XY5MQ
    OR
    eForCity 3.5mm to RCA Auxiliary Cable Cord for iPod/MP3 https://www.amazon.com/dp/B0042DIZTE/ref=cm_sw_r_awd_R0Wzub1X33PD9
    thx SO much )

  • How to make a video as mpeg_2 with audio together?

    Hi guys,
    I just could not figure out how to compress a mpeg_2 video with audio in it, which means the video and the audio as a whole one file.
    I am using FCP 5.0.4
    when i compress my finished video using compressor, it comes out two files, one video and one audio....
    I am just wondering what is the setting could make these two dudes join together to be one media file.

    To do it with Compressor 2, create a new preset based on MPEG2. To do this, open the Preset window and click the + menu in the upper right hand corner of the Settings tab. Select MPEG2 in this menu. In the inspector, click the Encoder icon near the top. Once you're in the encoder section, click the Extras tab and put a checkmark in Multiplexed MPEG-1/Layer 2 Audio. Click the other Encoder tabs to set other settings like size and quality/bitrate. Save your new preset after giving it a name and description at the top of the inspector window. Then use your new preset to compress your video.
    Disclaimer: I haven't actually tried these settings but I have some confidence it may be what you're looking for.

  • Giving iPod Classic as gift what should I do to ...

    I am giving my wife an 80 gig Classic for Christmas. What do I need to get ready so that things go smooth on Christmas morning?
    I have iTunes 7.4 and a 1st gen Nano and all is working fine. Thanks, Robert

    If you are going to be using two iPods with one computer you might want to have a look at this help page: How to use multiple iPods with one computer

  • How do I sync two different ipods with new iTunes software?

    Up until I upgraded to the new software, I was able to quickly and easily sync both my iPods. One is an iPod touch; the other a classic. Now, I can't sync my classic. Any idea why or what I'm doing wrong? This new software, IMHO, is not that intuitive.

    Is the following document of any help with that?
    [How to use multiple iPods with one computer|http://support.apple.com/kb/HT1495]

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • I have a ipod, but recently updated my laptop, how do I get my ipod to sync with my new PC, when I connect the USB the ipod say's "connected" eject before disconnecting

    I have a ipod, but recently updated my laptop, how do I get my ipod to sync with my new PC, when I connect the USB the ipod say's "connected" eject before disconnecting

    See KB Article:  How to use your iPod to move your music to a new computer

  • How to use two seperate iPods with one iTunes. Different Music Preferences

    My Wife and I both have 80 Gig iPods. We like different Music. How can we both use the same Windows XP computer and have different music lists?

    See: How to use multiple iPods with one computer
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • HT201303 OK SO I BOUGHT MY 7YEAR OLD DAUGHTERS AN IPOD TOUCH FOR THEIR BIRTHDAY AND THE SECOND THEY START PLAYING WITH THEM ONE SET A PASSWORD TO ENTER THE IPOD AND FORGOT THE PASSWORD. IT SAYS THAT THE IPOD IS ENABLED... HOW DO I FIX THIS PROBLEM? HELP

    I BOUGHT MY 7 YEAR OLD DAUGHTERS A IPOD TOUCH FOR THEIR BIRTHDAY, THE SECOND THEY BEGAN TO PLAY WITH THEM THEY BOTH SET PASSWORDS TO ENTER THE IPOD HOME PAGE, WELL ONE OF MY GIRLS FORGOT THEIR PASSWORD AND NOW IT SHOWS THAT THE IPOD IS ENABLED... HOW SHOULD I GO ABOUT THIS?

    You will need to restore the device from the computer to which the device is synced. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the device into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    Forum Tip: It is generally considered inappropriate to type all in uppercase letters in Internet discussions, as text that is typed all in uppercase is by convention considered to be shouting.  Uppercase is also more difficult to read, so please use all uppercase sparingly and only when you really mean to shout, which we hope you won’t need to do here .
    Also, please note that you posted in the iPhone forum.
    Regards.

Maybe you are looking for

  • No Startup Chime or Display

    I just installed a new HD and and preceeded to test the operation during re-assembly. I also used compressed air to clean dust from fans etc while it was disassembled. After the LCD was initially re-installed (screwed down), there was static video in

  • Oracle E-Business Suite 12.1 Installations fails on windows 7     64 bit

    Hi guys, I am trying since the last 10 days to install Oracle EBS 12.1 on windows 7 64 bit. I have installed the pre-requisites, .i.e: 1. MKS Toolkit 8.7 2. Visual C++ 2005 3. I am installing from the Administrator user Account, which is added to the

  • Could not resolve...

    Hi everyone, I'm currently playing around with the examples in AFCS and noticed when running Flexternal.mxml that I get an error at line 27 <rtc:AdobeHSAuthenticator authenticationKey="{authToken}" id="auth"/> Severity and Description Path Resource L

  • Screens On Sap cloud

    Hi Experts, I am new to cloud application. I just want to know what is difference between Screen senario with thing based navigation,screen senario with object based navigation, and single screen selection. I have just created one  custom object usin

  • Can I make iPhoto burn standard ISO CDs ?

    Dear All, anyone knows if it is possible to make iPhoto burn standard .ISO CD's instead of "iPhoto Archives" with a complete iPhoto file structure including thumbnails and so? My problem is that whenever I want printed pictures from the local Shop, I