Giving logical system name for PI 7.11 system

Hi,
how can i give logical system name for PI 7.11?
Thanks.

Check if this helps http://help.sap.com/saphelp_nw70/helpdata/en/aa/b4b13b00ae793be10000000a11402f/frameset.htm
if you are loking for naming conventing : use CLNT{client no.} eg: PIDCLNT001
Regards,
Srinivas

Similar Messages

Same logical system name for two productive systems - BW, PI issues

Dear all,
we have a productive system which serves two companies (different company codes). This system is connected both to BW and PI for both companies.
There is a requirement that these two companies must use their own system, so the whole landscape (dev,qa,prd) will be copied to different systems (different server with different system id).
As a result of the above procedure we wll have two different productive systems, as required, but we wll have the same logical system name for the two productive systems, which must be both connect to bw and PI.
However as far as I know:
- we cannot connect systems with same logical system name to BW,PI
- we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
How can we overcome the problem?
Please advice.

> However as far as I know:
> - we cannot connect systems with same logical system name to BW,PI
> - we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
Right.
> How can we overcome the problem?
Since you split up systems (or plan to) I highly recommend booking an SLO service (http://service.sap.com/slo). Those people have to the tools and the knowlege to help you. I would not do this on my own.
Markus

To get the logical system names of all the child systems in a CUA envirnmnt

Hi Gurus ,
Is there any table where we can find the logical system names of all the child sytems in a CUA environment .
This is for a requirement that i need to develop an automated process where we can reset the password of all the child system in a CUA environemt when requested by the user at once .
I found some tables such as V_TBDLS , but they do not contain the exact information what i need .
Thanks in advance ,
Harshit Rungta

Hi,
You are in the right track. BD54 will show you the logical system name for all the existed systems in CUA.
Else you can also go to your CUA system and execute t-code SALE --> Basic Setting --->Logical Systems ---> Assign logical system to client -
> Display details
here you can see logical system names for all the clients assigned to CUA.
Thanks,
Deb

Logical Sys Name for Business system in SLD for Third Party

Hi !!
I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
thanks
Gowri

Hi Gowri,
sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
Regards,
Udo

SLD: Adjust / Add logical system name for Business System [XI 3.0]

Hi,
In the System Landscape Directory, is it possible to adjust the logical system name of an already created business system?
I found in the content maintenance in Subset="All Classes", Class=SAP_BCClient" --> <MY_BUSINESSSYSTEM_ENTRY> the only possibility to add information on the logical system name of a business system.
Unfortunately, the information provided in the BCClient Entry is not forwarded to the Business System Entry for my Business System in the Business Landscape View of the SLD...
Is there another possibility to add the logical system name to an exisiting business system?
Regards
Kristian

In a third party business system, it is not possible to add a logical system, but you can delete the business system and recreate it with the same name without problems.
After assigning a new logical system to a business system, you have to go to the integration directory and reload the logical system for the business system. Therefore open the Business System in change mode and maintain the Logical System with menu service -> Adapterspecific Identifiers.
Regards
Stefan

Logical system name for this BI is not allowed

Working under Data Warehouse Workbench, when I click BI Content button, I get pop-up: "Logical system name for this BI is not allowed". Then I get three options from NW system: "Create", "Assign" or "Cancel".
What can I do? How to create a new Logical System?
Thanks,
Mike

Refer this link to create a Logical System...
http://help.sap.com/saphelp_nw70/helpdata/en/aa/b4b13b00ae793be10000000a11402f/content.htm

Changing the default logical system names for adaptive RFC models

Hello,
When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
Thanks in advance!
David.

Suresh,
Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
Hope that clears up what I'm looking for.
David.
Message was edited by:
David Z. Pantich

System name for alias GD4_500 not found in portal

Hi people,
I want to launch a query from analyzer, but i have the next error message "System name for alias GD4_500 not found in portal".
What can i do??
More thanks

Read,
http://help.sap.com/saphelp_nw70/helpdata/en/fb/93ed3d72fe4b5ae10000000a11405a/content.htm
Regards
Juan

Assign Logical file name for the physical file path through Program

Hi all,
I am having a physical file which is getting generated dynamically. It is having the date and time stamp in its name which is added at runtime.
Now I need to assign a logical file name for the physical file path through the program.
Is there any FM or any other method to assign the same.
Gaurav

I think it is not possible. becuase the date & time added at runtime. so if you check the table PATH you can find filename and their definitions
a®

No system found for component and Evaluation system in the Project

Hi Folks ,
Im facing this problem when im trying to Execute the T-codes from Solar01 of the Transactins Tab by Selecting the Line item and clicking on Execute button. Following is the Error and there no logs for it.
No system found for component and Evaluation system in the Project
Even i have checked with the RFC settings and Logical components are right
Please do suggest me - This is PRD issue . Try to do the needful .
Thanks in Advance
Amrita
Edited by: Amrita Amrita on Dec 3, 2009 12:53 AM

Hi all,
I've had the same issue with regards to getting the error below when assigning transactions to a Blueprint business process.
"No system found for component and Evaluation system in the Project"
But I think I have solved it and seems pretty simple to change the system role from Evaluation System to any other that is relevant in your landscape.
Go to transaction SOLAR01 > Click on the first level of the Project Name (Under Business Blueprint Structure) to select the Project.
Click Business Blueprint in the Menu > System Role > Choose the relevant System Role (in my case Development)
Click Copy
This should replicate to all nodes and then you should be able to assign transaction to the business processes.
Quite strange and seems simple, I checked the Solution Directory, Solar Project Admin etc etc but couldn't find the solution until this which should work.
If not, there is a similar work around which also works.
Go to transaction SOLAR_PROJECT_ADMIN
System Landsacpe Tab
Systems subtab
Click System Role Assignment
Remove the Evaluation System (or all those not relevant to your Project and Logical Components)
Save Project
Go to SOLAR01 and it should reflect it in the Blueprint.
You can always go back to this and add the System Roles you removed and the Blueprint will reference the correct Role.
Hope this helps everyone,
-Rohan

Logical system name for acknowledgement in BPM

Hi,
I have a szenario:
IDOC --> BPM --> MAIL
Inside BPM I check the message and depending on an xml-element I stop the process or I send the message by mail.
When I stop the process the BPM sends back an acknowledgement and in SXMB_MONI I can see an error of the acknowledgement:
"Sender Test_BPM_IDOC_TO_MAIL kann nicht in ein ALE Logisches System umgeschlüsselt werden" (Sender can not convert in a ALE logical system)
What can I do?
Possible Solution 1:
I can define my BPM "Test_BPM_IDOC_TO_MAIL" as a logical system (including WE20 for ALEAUD).
Possible Solution 2:
I can enter an existing logical system name in the "adapter specific attributes".
BUT it is not use the same logical system name twice (BAD ... or is there a workaround?
Is Solution 1) a common way?
Thanx
Regards
Wolfgang Hummel

Hi,
there are many ways:
some for aleaud are described in my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
>>>>Is Solution 1) a common way?
no this is not good a good idea
BTW
you can also supress aleaud raport IDX_NOALE
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Defining Logical System name for ALE using T.C- SPRO?

Hi,
Can anybody tell, how to define logical system name using T.C SPRO?
Where can I find the "Define Logical System for ALE"?
Thanks
Balaji

HI,
Use the SALE transaction , there you can have all steps clearly,
please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
Regards
Chilla..

Incorrect logical system name for datasources - entry not in TADIR

Hi all,
I currently can't replicate or edit any of my data sources because, after we applied some patches, the logical system name appears to be incorrect and a message is displayed saying the R3TR RSDS entry does not exist in table TADIR.
For example:
Object directory entry R3TR RSDS 0EMPLOYEE_0016_ATTR R3DEV does not exist.
That's correct, because all entries exist for my actual source system CD1CLNT175, not for SAP standard R3DEV.
Does anybody have any idea how I can update my source system configuration/mapping? I've looked on the forum but couldn't
find a clear cut answer.
Thanks a lot!
Markus

Hi all,
I think the solution lies in SAP note 1604726 "DataSources with package assignment cannot be activated"
1. When you access the change transaction RSDS, the system issues error message TK 753 "Object directory entry R3TR ... does not exist" twice.
2. When you try to activate the DataSource, the system issues error message TK 425 "Invalid call sequence for interfaces when recording changes".
My message is TK753.. and before that I receive TK425, I guess we have to apply SP28... time for Mario and Luigi to apply some pizzas... ehmm patches...!
I will let you know if that solved the problem, thanks for your help guys!
Markus

Logical System Name for Portal

Hi all,
I am busy documenting System Info for a newly installed Portal (EP6) including values such as SID, Sys No, etc.
I would like to know if a Portal has a Logical System Name.
As far as I know, it does not, but I would like to confirm.
Regards
Sunil

Hi,
As per the naming conventions its defined as <SID>CLNT<Client no>.
Then a system with SID = J2E and client = 000 will have a logical system name J2ECLNT000.
Hope this helps.
Regards
Bharathwaj

Default logical system names for application and metadata in models.

hi,
I have a dbt in web dynpro java. When we create a model, we give the logical system names. When our developement is over, do we have to change these names because in test system and subsequently production system, the backends will be oviously different than developement ?
how do we change them and re import after changing? in abap we cant change our code in test and prod systems right so how is it in web dynpro java ?
thanks

Hi Jeschael,
thanks for the reponse.
When I create the model, I give the default logical system names and on the next screen I give the
ip address of the backend system, client , login, password etc
Even though the logical system names wud be same in Dev, Test and Prod systems, the ip address, login password is different so how do I give it ?
thanks
B

Giving logical system name for PI 7.11 system

Similar Messages

Maybe you are looking for