Giving printer the router address

I have the HP pro 8100 printer and it has already been set up and worked fine. Now we have changed internet suppliers and have a different router and I cannot work out how to give the printer the new router identity.

Here's instructions that should help you get set up on your new network.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/setupInstallDisplay/?sp4ts.oid=4...
I am an HP employee.
Opinions expressed are mine and do not necessarily reflect the opinions of HP.
Reminder: Please select the Accept as Solution button on the post that best answers your question. Also, you may select the Kudos button on any helpful post to give that person a quick thanks.

Similar Messages

How to print the changed address in delivery output

Dear Gurus,
As all we know the customer address comes in sales order from customer master table or address table and further get copied into delivery also in case of same SP and SH.
My issue is that we do not maintain different SH for a sold to party so SP = SH and there addresses will also be same.
In output we are getting address from ADRC table.
Now if we change the ship to party address in delivery manually and get the output the printed address is unchanged.
But I want to print the changed address in delivery output without changing the masters and maintaining diiferent ship to party.
Please help me how to determine it in print out???
Thanks,
Sanjay

Hi,
I think the logic you have written is wrongly on output.
The logic is like this:
Pass the document number into "VBPA" table.
Execute.
Fetch the address number against "WE(ship-to-party)".
Pass the same address number into "ADRC" table to get the address.
Here you will get the new address which is different from the maaster data.
Regards,
Krishna.

Print the user address in print layout

hi
i need the print the user address in print layout.the address store in OUDG. but i call this field in pld. But its not print anything..please any one give the suggestion
We have the three branches.but using one pld. So the user default address show in pld in automatically changes as per user enter.
Edited by: Isayah.I on Nov 6, 2008 9:53 AM

Hi there,
So you have three branches using only one PLD? If the address is not showing. please try to create a three PLD's for the three company branches, every time the user print a PLD they must choose a PLD assign from them.
Regards,
Clint

Where is the router address

My airport extreme is asking for the router address, where is that located?

Does the iPod successfully onnect to other networks?
Do other devices successully conect to the network?
Try:
- Resetting the iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Powering off and then back on yuor router
- Go to Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points

HP LaserJet P1102w. I print the IP address in the address line and there is no tab for Web services.

HP LJ P1102w. want to sign on the HP web services. I print the IP add. in Explorer and I do not get Web services tab

Hi,
The Web Services functionality is only avaiable on later firmware versions,
Updating the firmware of the printer will add the functionality and the tab will become available.
Be sure to temporary plug the printer to your PC with a USB, then run the firmare updater below by selecting the newly added USB printer queue:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-115794-1&cc=us&dlc=en&lc=en...
Once the firmware update completes unplug the USB and follow the steps below to enable web services:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03128518&tmp_task=setupCategory&cc=us&dlc=en&lc...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

When web printing , the url address at the page bottom is garbled on hp 4100 ...lexmark prints corre

when printing from the web on an hp4100 ,the url at the page bottom is garbled.....on the lexmark laser it is correct.....

Hi,
Please see [https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox?e=sph&redirectlocale=en-US&as=s&s=printing&r=0&redirectslug=Firefox+prints+incorrectly this].
[http://kb.mozillazine.org/Problems_printing_web_pages Problems printing web pages]

Can pages print a sheet of Avery labels, with the same address on all labels? If not, why not?

How do you print the same address on a sheet of Avery labels using Pages? If not, why not?

It is possible. Download the Pages template form here > Open the template in Pages. Fill in the desired information in the first cell. Copy the information (address) Hold the cursor down and scroll down one column of labels and hit paste > it should be highlighted. Repeat by highlighting the next column and paste. You probably using 30 up labels so there would be 3 columns. Hope that helps.

Finding the IP address of a router

Hello,
I need to find out the IP address of my router - how can I do this from a terminal?
ifconfig gives my internal and external IP, but it is the router address that I would like. Additionally, it would be useful to know a terminal command that lists the IP addresses of machines connected to my local subnet.
Thanks in advance,
Nick

Have you tried the netstat command ?
http://www.osxfaq.com/tips/unix-tricks/week42/friday.ws
Waiting MacPro(18th Sept Arrive to Cork) || MacBook 1.83 in reparation for RRS Mac OS X (10.4.7) AMD64 3000+

Setting Up Time Capsule as a DHCP server in the router portion

Hello
I have converted my existing wireless router and network hard drive to a single time capsule. My old router was setup as a DHCP server and I had the IP range set to 10.0.0.1 to 10.0.0.50 and had a IMac, Windows PC and Copier connected to the EtherNet ports and my home network ran perfectly but only at 100MPS.
I bought the time capsule to eliminate the old router and network hard rive to a single unit to free up space, but I can't figure out how to set up the time capsule router as a DHCP server? Every time I try and change the router address range and tell the software to configure the time capsule, I get errors saying my DNS range is not valid and the IP range is conflicting to the Internet settings?
My old linksys router was so easy to setup, I just selected DHCP, gave it a range and the router took care of the IP address for the Internet. I consider myself a smart guy but apple has made this a little difficult.
I would also like to setup the time capsule so it show up as an external drive in my mobileme account so I can access my files when I am on the road. HELP!!!
Ron

ronbak wrote:
I have converted my existing wireless router and network hard drive to a single time capsule. My old router was setup as a DHCP server and I had the IP range set to 10.0.0.1 to 10.0.0.50 and had a IMac, Windows PC and Copier connected to the EtherNet ports and my home network ran perfectly but only at 100MPS.
I bought the time capsule to eliminate the old router and network hard rive to a single unit to free up space, but I can't figure out how to set up the time capsule router as a DHCP server? Every time I try and change the router address range and tell the software to configure the time capsule, I get errors saying my DNS range is not valid and the IP range is conflicting to the Internet settings?
In the Internet panel and Internet Connection tab of AirPort Utility, do you have "Configure IPv4" set to "Using DHCP" and "Connection Sharing" set to "Share a public IP address"?
I would also like to setup the time capsule so it show up as an external drive in my mobileme account so I can access my files when I am on the road. HELP!!!
You can set that in the Advanced panel, MobileMe tab.

AP Check not printing all of address on Vendor Master

Hello SAP Guru's,
I have an issue where when we execute F110 for check run, it is not printing the complete address as we have under Vendor Master. For example, the check print is not showing the following from Vendor Master record:
Building Code
Street 2 STR_SUPPL1
Street 3 STR_SUPPL2
District (not sure if this is necessary) CITY2
What is the problem? How do I fix it so that we capture the complete address on the check?
Thanks a million!

Thank you Dianne but I don't see anything under SE71.
Perhaps I am unfamiliar with the transaction.
Is this something I can do or should I seek ABAP support? I am not sure if this is a functional issue or ABAP.
Thank you.

Change router address?

Our SMC router died today at work. I replaced it with a new Airport Extreme. Now all the Windows computers here are looking for a specific router address. Rather then change them all, I would like to just change the router address to match that of the previous. Cant seem to figure out how to change the address. I can see the address, but cant make any changes to it. Is this not an option? Or what am I missing here?

My guess would be that the 64.230.197.40 address is the WAN side IP address that you are receiving from your service provider.
The 192.168.1.1 or 10.0.1.1 is the local area network address. Depending on which range you choose, devices connected to the AirPort Extreme will receive IP addresses as follows 192.168.1.2, 192.168.1.3, etc. Or if you are using 10.0.1.1 as the router address, then it would go 10.0.1.2, 10.0.1.3, etc.
I think your devices should be pointed to either 192.168.1.1 or 10.0.1.1.
If you open AirPort Utility and click on your AirPort Extreme, to the right you will see some information about the device. The IP address of the device on your local network will be displayed there. If you haven't changed the DHCP ranges, the IP address will be 10.0.1.1.
Message was edited by: Bob Timmons

Perform modification of the delivery address

I want to change the address, so send me your order to the address registered at apple. I can't change the address from web page, please help me, thank you.

I feel you are printing the receiving plant address as delivery address . Plant is at line item level ... Hence probably you are printing at the line item level .
kindly get the clarification from the business whether u can print the company address as delivery address since the company code at the header level . if this is so select the company code and find the address number from company code data(t001) and map this address number to the ADRC table and print the address.
In case u want to print the plant address , hence business has to confirm that wr u can print any plant of the line item .....
Please reward point for useful answers . please post ur reply if you are not satisfied with or for further queries.
Regards
Mani

Setting router address

I access the Internet via an 802.11 Netgear router, which in turn routes packets to ISP-side gateway, and then on to ISP-run NAT.
The Netgear router runs a DHCP server, which assigns requestees IPs from a 10.222.139.* block assigned to me by the ISP.
ISP's gateway is at 10.222.222.254. The Netgear router is configured to give out the router address as part of DHCP lease. The Apple laptop I have seems to be ignoring the setting, insisting that the router is at 10.222.139.2, which is the static address of the wireless router.
I tried working around this bug by trying to specify the gateway address manually, but OS X seems to have the setting disabled when address is assigned by DHCP.
The issue is definitely Apple-related, as I have two laptops running Windows XP, a laptop running Windows Vista, and a laptop running Ubuntu Linux, and they all Just Work without me needing to change any of the settings.
How can I make an Apple laptop either do what the DHCP server tells it, or manually configure it to get the address from DHCP, and hardcode that parts it ignores so the Internet connection works?

What do you mean when you said: "As soon as I change the address under Router IP, and after that enter the new router address (eg 192.168.1.254), I get this phenomenon that I cannot login to the router anymore." Are you entering two addresses? You should only be entering one address.
Please follow this procedure:
1) Power down your entire network. Disconnect the WRT160N from all other devices.
2) Power up the WRT160N and allow it to fully boot (1-2 minutes).
3) Press and hold the reset button for 30 seconds, then release the button and allow the WRT160N to reset and reboot (2-3 minutes).
4) Power down the WRT160N. Connect one computer, by ethernet cable, to a LAN port on the WRT160N.
5) Power up the WRT160N and computer. Login to the WRT160N at 192.168.1.1 .
6) In "Network Setup", change the "Router IP address" from 192.168.1.1 to 192.168.1.254
7) Change the "DHCP server" to "disabled".
8) Click the "Save Settings" button. Wait (3-60 seconds) for the screen to refresh. At this point in time, you will likely be disconnected from the WRT160N. Do not worry about this.
9) Power down the WRT160N and your computer.
10) Next, using an ethernet cable, wire a LAN port on your modem to a LAN port on the WRT160N. Leave one computer wired to the WRT160N. Do not connect anything to the Internet port on the WRT160N.
11) Power up your modem, WRT160N, and your computer. It should work. Using the computer that is wired to the WRT160N, try to access the WRT160N setup page at 192.168.1.254
12) If you still have trouble, repeat above procedure, but give the WRT160N the address 192.168.1.2 , and see if that address will work.
Message Edited by toomanydonuts on 03-27-2009 02:08 AM

I can't access router address. "404 not found"

With my Linksys cable modem and wireless router hooked up and running properly, I can't access the router address. I get "File 404 not found" and "The requested URL was not found on this server. " It is the same address as in the Network Preferences window. The wireless router works great and all computers in the network have fast internet access but my boys want to "tweak" the port settings on the router and can't get to them. I've tried resetting the router every way possible but to no avail so I'm wondering if I don't have something
set properly on the network page of OSX. Any help would be appreciated.
Mac-Mini Mac OS X (10.4.4) 1 GB Mem, Pioneer DVR Dual Layer

Okay, sometimes routers go weird...so, unplug the router for at least a minute, then plug it back in. When it finishes the startup sequence, try logging in again.
If you ever do get in, there is a firmware update available for your router. The firmware might be corrupted (happens a lot).
http://www.linksys.com/servlet/Satellite?c=LCASupportC2&childpagename=US%2FLayout&cid=1166859837401&packedargs=sku%3DWRT54G&pagename= Linksys%2FCommon%2FVisitorWrapper&displaypage=download#versiondetail

Setting up AirPort Extreme/Router Address?

During setup, I am getting an "invalid IP address" error message. I have checked with my ISP and they have verified my IP Address, Subnet Mask, and DNS Server Numbers. They indicated that they do not have [use] a Router Address, and that I must obtain it from Apple. When I attempt to populate the Router Address field with the Ethernet number found on the bottom of the Extreme unit, it is not recognized (accepted) because it contains letters, not just numbers. This problem appears to be the only thing preventing me from successfully completing the set up. What is a Router Address anyway?
A solution to my problem will be much appreciated. I see from the volumes of questions being posted about AirPort Extreme setup that many are not simply taking it out of the box and setting it up successfully in "about five minutes" as advertised.
Thank you,
Dr. Eric

I tried what you suggested, and many other things. None solved my problem. However, what did solve my problem was downloading the latest (posted Jan 25) Airport Extreme update. Once I did that, I opened the AirpPort Utility, went through the setup process, and I now have an internet connection. When I went through setup, a router address was automatically assigned.
Thanks for you input.

Giving printer the router address

Similar Messages

Maybe you are looking for