Gkbisd Unable to collect cdhash error code 100024

What is process/daemon gkbbisd ?
What is cdhash? What means "error code 100024" ?
One example message:
07/03/2014 9:17:24.443 PM gkbisd[246]: Unable to collect cdhash for /System/Library/CoreServices/Install in Progress.app (error code 100024)
I have hundreds more
"/System/Library/CoreServices/Install in Progress.app" ??

It looks like gkbisd is used for verification of code signatures for GateKeeper (the thing that asks you if you really want to open an app when you open it for the first time). It was only added in 10.9.4.
I was getting the same log messages, and found that removing its database and restarting the process stopped the messages from occurring.
Open Terminal and do the following:
sudo killall gkbisd
sudo mv /private/var/db/gkbis.db /private/var/db/gkbis.db.backup
sudo /usr/libexec/gkbisd &
You'll be asked to enter your password to run these commands.
This will kill the gkbisd process, move the database (so it has to build it again), and then restart it.
If you're comfortable with the command line then there should be no harm in deleting the database rather than moving it.

Similar Messages

Unable to empty trash error code 8003 appears ?

Unable to empty trash error code 8003 appears ?

I had the same problem - tried all sorts but nothing worked. Eventually I used a tool called Trash It! which did the job (though apparently it is only to be used as a last resort).
http://www.macupdate.com/app/mac/8214/trash-it! Emptied the Trash and no problems since.
Cheers
J

Unable to empty trash error code 8003

Unable to empty trash error code 8003
MacBook Pro
OSX 10.6.7
4GB RAM

I had the same problem - tried all sorts but nothing worked. Eventually I used a tool called Trash It! which did the job (though apparently it is only to be used as a last resort).
http://www.macupdate.com/app/mac/8214/trash-it! Emptied the Trash and no problems since.
Cheers
J

TS3694 unable to restore iphone error code 3194 keeps coming up what do i do?

unable to restore iphone 4 - error code 3194 keeps coming up what do i do ?

Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

Unable to open TM -- Error Code -43

Have been using TM 1.0 for 3 days, suddenly unable to open app. Getting msg "The operation could not be completed. An unexpected error occurred (error code -43)." Re-installed OSX to 10.5.1 and ran "repair disk permissions" from Disk Utility. Any ideas? What is error code -43? I thought error codes went out with OS9.... Thanks for your help.

Was able to startup TM again my pressing the Control key while clicking the TM app icon. A pop-up menu appeared from which TM Preferences was selected. It appears that error code -43 is akin to a external HD that is not mounted. All is well again

Unable to write smartlist, error code 1060301

Hi Team Members,
we are trying to use Essbase Studio to create Essbase cube by using relational db tables.
while doing that we are getting following Error.
Note:_
we have tried it with partitioned table & Normal Tables bt result are same.
rational tables we are using contains varchar2 data type.
Hirerchy contains : 2 columns SourceID & FileID ---> datatype varchar2
Measure Hir Contains: 1 column duration ---> datatype varchar2
Environment:_
Essbase Studio (11.1.2.1)
Essbase server 11.1.2.1
Relational DB: Oracle 10g R2
eRROR:_
Specified smart list missing name NoData will be ignored
Specified smart list out-of-range name OutOfRange will be ignored
Record #3752 - Unable to write smartlist 4203, error code 1060301*
Deployment Log_
Member load for dimension RedPSHIR started at: Sep 22, 2011 12:25:38 PM PKT. Records processed: 2,163.
Member load for dimension RedPSMHir started at: Sep 22, 2011 12:25:50 PM PKT. Records processed: 3,751. Records rejected: 3. Member load elapsed time: 26 Seconds.
Data load started at: Sep 22, 2011 12:26:05 PM PKT. Data load elapsed time: 15 Seconds.
The error file is located on the server at: C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\.\ess_japihome\data\TEST.Plan1_09-22-11_12-25-36.err
Failed to deploy Essbase cube.
Caused by: Failed to load data into database: Plan1.
Caused by: Cannot get async process state. Essbase Error(1042017): Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the olap.server.netConnectRetry and/or olap.server.netDelay values in the essbase.properties. Restart the server and try again.
TEST.Plan1_09-22-11_12-25-36.err file output_
Specified smart list missing name NoData will be ignored
Specified smart list out-of-range name OutOfRange will be ignored
Record #3752 - Unable to write smartlist 4203, error code 1060301
Regards,
Alee

Hi guys,
I think the issue was due to using varchar2 datatype column (duration) for measure Hirerchy.
after converting it into number (using view option in rational DB) & doing the whole process again. it works fine
Reference section (Note):
rational tables we are using contains varchar2 data type.
Hirerchy contains : 2 columns SourceID & FileID ---> datatype varchar2
Measure Hir Contains: 1 column duration ---> datatype varchar2
Regards,
Alee

Unable to restore iPhone. error code 21

I am unable to restore my iPhone through iTunes. I keep getting an error code 21 after trying recovery mode. please help, I've followed work around instructions on apple, but no luck. Also because the phone will not turn on I am unable to locate serial number for the device.

If you have tried the troubleshooting steps outlined in this article for Error 21 unsuccessfully, then you will need to contact Apple Support to get help:
Resolve specific iTunes update and restore errors
https://www.apple.com/support/contact/
Best of luck,
GB

Unable to update Photoshop - Error code U44M1P7

I have Photoshop CS6 installed through Creative Cloud on Mac OSX 10.8.3. Photoshop says it is running 13.0.4 x64. The Creative Cloud updater indicates that there is an update available to 13.1.2, however whenever I try to update, the update fails with error code U44M1P7. I searched the forums and have seen several references to this error, but I haven't seen a good method for resolving the error. What steps can I take to resolve this problem and still have my Photoshop installation configured correctly with all my current settings and plugins.
Thanks.
Jim

So I ended up uninstalling, cleaning and reinstalling. After the installation I checked for updates. I managed to install the 13.1.2 update to Photoshop CS6, but the updates for Adobe Bridge CS6, Photoshop Camera Raw 7 and Adobe Extension Manager CS6 failed. The log file had this to say about Camera Raw:
04/21/13 14:44:44:385 | [WARN] | | OOBE | DE | | | | 4959771 | DW050: The following payload errors were found during install:
04/21/13 14:44:44:385 | [WARN] | | OOBE | DE | | | | 4959771 | DW050: - Camera Profiles Installer_7.4_AdobeCameraRawProfile7.0All: Install failed
04/21/13 14:44:44:385 | [WARN] | | OOBE | DE | | | | 4959771 | DW050: - Photoshop Camera Raw 7_7.4_AdobeCameraRaw7.0All: Install failed
For Bridge:
04/21/13 14:51:19:454 | [WARN] | | OOBE | DE | | | | 4987621 | DW050: The following payload errors were found during install:
04/21/13 14:51:19:454 | [WARN] | | OOBE | DE | | | | 4987621 | DW050: - Adobe Bridge CS6_5.0.2_AdobeBridge5-mul: Install failed
And for Extension Manager
04/21/13 14:51:35:526 | [WARN] | | OOBE | DE | | | | 4988349 | DW050: The following payload errors were found during install:
04/21/13 14:51:35:526 | [WARN] | | OOBE | DE | | | | 4988349 | DW050: - Adobe Extension Manager CS6_6.0.5_AdobeExtensionManager6.0All: Install failed
I don't use Bridge that often so that isn't a big deal. Camera Raw is a bigger deal, although most of the time I use Lightroom.

Unable to open applications: error code -10810

For some reason I have started to have problems opening up applications after my computer has been on for around 10 minutes. I am able to open up apps at startup, but after they've been running for a while, if I try to open additional apps (from either the doc or the apps folder) I get a pop-up error window with the code "-10810". This number shows up in all the error windows.
I've tried to do some research on this and found a couple of articles saying to delete the following:
/Library/Caches/com.apple.LaunchServices.6B.csstore
~/Library/Preferences/com.apple.LaunchServices.plist
(where '~' means your Home directory, i.e. '/Users/yourname')
but I don't have this particular file.
Can anyone help me? This problem just started today, but I've been running Leopard for about a month now.

Was able to startup TM again my pressing the Control key while clicking the TM app icon. A pop-up menu appeared from which TM Preferences was selected. It appears that error code -43 is akin to a external HD that is not mounted. All is well again

HT201210 unable to restore 3gs, error code -1 comes up at end of firmware restore

I am trying to restore my Iphone 3gs, unfortunately when the restore reaches the end of firmware restore it seems to pause for a minute, i then get a message telling me that anunknown error has occured, error code (-1). i cant seem to find out what this error code means, I have put phone into DFU mode and restored again and again but always the same result. HELP

Do a search for error 1 at the top of the forum, this subject has been brought up numerous time in numerous threads. Look for the green check mark.

Unable to catch LDAPException error code(53) in jsp on weblogic 6.1

When I try to authenticate a user in LDAP whose account is inactivated the following error is thrown UNWILLING_TO_PERFORM in weblogic Server log.
My JSP file couldn't to catch this exception, where as it could catch all other exception like NO_SUCH_OBJECT
INVALID_CREDENTIALS. It throws 500 internal server error on browser which seems awkward to the user.
Im Using basic authentication model by setting 401 status code in response.
I have even tried catch block with Exception, but failed to catch it.
Could Any one plz help me out.
Exception in detail-----
Servlet failed with Exception
netscape.ldap.LDAPException: error result (53); Account inactivated. Contact system administrator.; DSA is unwilling to perform
at netscape.ldap.LDAPConnection.checkMsg(LDAPConnection.java:4852)
        at netscape.ldap.LDAPConnection.internalBind(LDAPConnection.java:1757)
        at netscape.ldap.LDAPConnection.authenticate(LDAPConnection.java:1294)
        at netscape.ldap.LDAPConnection.authenticate(LDAPConnection.java:1303)
        at netscape.ldap.LDAPConnection.bind(LDAPConnection.java:1613)
        at weblogic.security.ldaprealmv2.LDAPDelegate.authenticate(LDAPDelegate.java:851)
        at weblogic.security.ldaprealmv2.LDAPRealm.authUserPassword(LDAPRealm.java:61)
        at weblogic.security.acl.AbstractListableRealm.authInternal(AbstractListableRealm.java:186)
        at weblogic.security.acl.AbstractListableRealm.authenticate(AbstractListableRealm.java:127)
        at weblogic.security.acl.AbstractListableRealm.getUser(AbstractListableRealm.java:110)
        at weblogic.security.acl.CachingRealm.authenticate(CachingRealm.java:945)
        at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:889)
        at weblogic.security.acl.Realm.authenticate(Realm.java:200)
        at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
        at weblogic.security.acl.internal.Security.authenticate(Security.java:172)
        at weblogic.servlet.security.internal.SecurityModule.checkAuthenticate(SecurityModule.java:302)
        at weblogic.servlet.security.ServletAuthentication.weak(ServletAuthentication.java:318)
        at weblogic.servlet.security.internal.BasicSecurityModule.checkAuthenticateHeader(BasicSecurityModule.java:62)
        at weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(ServletSecurityManager.java:118)
        at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2674)
        at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2427)
        at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:159)
        at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:140)
--------------- nested within: ------------------
weblogic.security.ldaprealmv2.LDAPRealmException: Account inactivated. Contact system administrator. - with nested exception:
[netscape.ldap.LDAPException: error result (53); Account inactivated. Contact system administrator.; DSA is unwilling to perform]
        at weblogic.security.ldaprealmv2.LDAPDelegate.authenticate(LDAPDelegate.java:885)
        at weblogic.security.ldaprealmv2.LDAPRealm.authUserPassword(LDAPRealm.java:61)
        at weblogic.security.acl.AbstractListableRealm.authInternal(AbstractListableRealm.java:186)
        at weblogic.security.acl.AbstractListableRealm.authenticate(AbstractListableRealm.java:127)
        at weblogic.security.acl.AbstractListableRealm.getUser(AbstractListableRealm.java:110)
        at weblogic.security.acl.CachingRealm.authenticate(CachingRealm.java:945)
        at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:889)
        at weblogic.security.acl.Realm.authenticate(Realm.java:200)
        at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
        at weblogic.security.acl.internal.Security.authenticate(Security.java:172)
        at weblogic.servlet.security.internal.SecurityModule.checkAuthenticate(SecurityModule.java:302)
        at weblogic.servlet.security.ServletAuthentication.weak(ServletAuthentication.java:318)
        at weblogic.servlet.security.internal.BasicSecurityModule.checkAuthenticateHeader(BasicSecurityModule.java:62)
        at weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(ServletSecurityManager.java:118)
        at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2674)
        at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2427)
        at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:159)
        at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:140)
..so on

It would worth if you take a look to the access log file, and see what error code is returning your operation. I detected that when you perform an ldapsearch using a user with expired password (with DS 5.2, explicitly passwordExpirationTime set to 19700101000000Z in my case) the command returns "ldap_search: DSA is unwilling to perform"
jair@riscl~ $ ldapsearch -b "o=isp" -D "uid=RRJA2829,ou=people,o=affiliates,o=isp" -w met999 "uid=admin"
ldap_search: DSA is unwilling to perform
jair@riscl~ $ echo $?
53And the access log shows (LDAP_SUCCESS for BIND operation):
[23/Jun/2009:15:16:14 -0500] conn=1847 op=-1 msgId=-1 - fd=48 slot=48 LDAP connection from 127.0.0.1 to 127.0.0.1
[23/Jun/2009:15:16:14 -0500] conn=1847 op=0 msgId=1 - BIND dn="uid=RRJA2829,ou=people,o=affiliates,o=isp" method=128 version=3
[23/Jun/2009:15:16:14 -0500] conn=1847 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=rrja2829,ou=people,o=affiliates,o=isp"
[23/Jun/2009:15:16:14 -0500] conn=1847 op=1 msgId=2 - need new password
[23/Jun/2009:15:16:14 -0500] conn=1847 op=1 msgId=2 - RESULT err=53 tag=101 nentries=0 etime=0
[23/Jun/2009:15:16:14 -0500] conn=1847 op=2 msgId=3 - UNBIND
[23/Jun/2009:15:16:14 -0500] conn=1847 op=2 msgId=-1 - closing - U1
[23/Jun/2009:15:16:15 -0500] conn=1847 op=-1 msgId=-1 - closed.So, it is possible that your code doesn't catch the exception because the bind operation is returning code 0 (LDAP_SUCCESS) and for some other reason weblogic is receiving a second code 53 which is thrown by the server and not catched by your code, I really don't know if it is possible, is just what comes to my mind right now.
I also made a test with java using the same user with expired password and couldn't catch any exception like in your case
import java.util.Hashtable;
import javax.naming.directory.*;*
*import javax.naming.ldap.*;
import javax.naming.*;
public class Password {
   public static void main (String args[]) {
      LdapContext ctx = null;
      String userid = "uid=RRJA2829,ou=people,o=affiliates,o=isp";
      String passwd = "met999";
      try {
         Hashtable env = new Hashtable();
         env.put("java.naming.factory.initial", "com.sun.jndi.ldap.LdapCtxFactory");
         env.put("java.naming.provider.url", "ldap://riscl:389/");
         env.put("java.naming.security.principal", userid);
         env.put("java.naming.security.credentials", passwd);
         ctx = new InitialLdapContext(env, null);
      } catch (AuthenticationException e) {
            System.out.println("=> " +e.getMessage()+ " <=");
      } catch (NamingException ne) {
         System.out.println("=> " +ne.getMessage()+ " <=");
}and the logs showed:
[23/Jun/2009:15:32:41 -0500] conn=43 op=-1 msgId=-1 - fd=52 slot=52 LDAP connection from 127.0.0.1 to 127.0.0.1
[23/Jun/2009:15:32:41 -0500] conn=43 op=0 msgId=1 - BIND dn="uid=RRJA2829,ou=people,o=affiliates,o=isp" method=128 version=3
[23/Jun/2009:15:32:41 -0500] conn=43 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=rrja2829,ou=people,o=affiliates,o=isp"
[23/Jun/2009:15:32:42 -0500] conn=43 op=-1 msgId=-1 - closing - B1
[23/Jun/2009:15:32:42 -0500] conn=43 op=-1 msgId=-1 - closed.but in this case LDAP is not returning the code 53 "UNWILLING TO PERFORM" to java app in the way it did to ldapsearch.
Hope it helps.
BR,
jairsinho

Unable to Publish Project - Error Code -108

I am trying to publish a project (photos only) that is just a little over 1 hour long. About 75% of the way through I get the -108 error. An error code search indicates "error -108 iMemFullErr or memFullErr: Not enough room in heap zone" .....but I have 14gb RAM and a free 1TB hard drive. Any ideas?

I experienced this error code when I was trying to export a movie using the QuickTime option and H.264 format.
Tried a slew of different video settings without success (meaning after a few minutes of trying to export, iMovie would give me error code -108.
Then, I started suspecting the audio format. So, first I exported the movie without the audio tracks and it completed successfully. Then, I tried exporting with the AAC audio encoder instead of the default Linear PCM option, and it, too, successfully exported the movie, with audio.
So, try a different audio format output for your publication.

Unable to burn dvds Error code 0x8002006D

I can burn cds but not dvds. I get this error message: Error code 0x8002006D Any ideas?

Hello JoanneD
The iMac Super Drive's, are picky about the brand of dvd.
1. restart and try again
2. try cleaning the drive
3. try another brand of dvd
Google Search: [Error code 0x8002006D|http://www.google.com/custom?hl=en&client=pub-6263300333013957&cof=F ORID%3A1%3BGL%3A1%3BLBGC%3A336699%3BLC%3A%230000ff%3BVLC%3A%23663399%3BGFNT%3A%2 30000ff%3BGIMP%3A%230000ff%3BDIV%3A%23336699%3B&ie=ISO-8859-1&oe=ISO-8859-1&q=Er rorcode0x8002006D&btnG=Search]
Dennis

Unable to Burn CDs - Error code: 2131

Hi Everyone!
HAs this one come up yet? I go to burn a CD, it initializes and then pops the CD out with error code 2131.
I have the latest version of -tunes on Vista.
Any help would be much appreciated!
Many Thanks

This is the diagnostic print from my i-tunes:
Microsoft Windows Vista Home Edition (Build 6000)
DIXONSXP DIXONSXP
iTunes 7.7.1.11
QuickTime 7.5
CD Driver 2.0.7.3
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.0.1.5
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number 60612AC588C35EB6
Current user is not an administrator.
The current local date and time is 2008-08-22 14:50:18.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.0.7.3),
E: TSSTcorp CDDVDW TS-L632H, Rev TMC0
Audio CD in drive.
Found 18 songs on CD, playing time 63:14 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:31:37
Track 3, start time 07:30:67
Track 4, start time 11:32:05
Track 5, start time 15:56:67
Track 6, start time 19:46:47
Track 7, start time 22:46:67
Track 8, start time 26:23:25
Track 9, start time 30:37:07
Track 10, start time 34:14:62
Track 11, start time 35:16:65
Track 12, start time 39:02:00
Track 13, start time 40:36:65
Track 14, start time 44:55:37
Track 15, start time 48:21:05
Track 16, start time 53:09:50
Track 17, start time 55:18:65
Track 18, start time 59:37:32
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 24.
The drive CDRW speeds are: 24.
The drive DVDR speeds are: 24.
The drive DVDRW speeds are: 24.
The last failed audio CD burn had error code 2131(0x00000853). It happened on drive E: TSSTcorp CDDVDW TS-L632H on CDR media at speed 0X.

Unable to install CC - Error Code 205

I tried installing Creative Cloud this morning and I had a problem (Error code: 205) and it could not install the software. It looks as though I cannot install Adobe Photoshop until I have CC installed.

Itzy4 please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve Error 205.

Gkbisd Unable to collect cdhash error code 100024

Similar Messages

Maybe you are looking for