Gkrellm and KDE

I have recently been having problems with Gkrellm and KDE. I have gkrellm set to be dockable. However, when I move gkrellm to the right of the screen and it docks there, the KDE panel shrinks in width a little bit, and shifts to the right. Any ideas why this is happening?

When you open up Konsole (or whatever terminal program you are using) it logs you in automatically for the terminal session. So you are logged in to KDE and also Konsole. As a test, open up more Konsoles and see how many users you have.
Last edited by michy99 (2010-03-20 01:47:23)

Similar Messages

[solved] Issue with conky and Kde 4

I have a small issue with conky and KDE 4.2. I start conky with a script which I stored under ~/.kde/Autostart. The script is simple and looks like this..
conky -c ~/.conkyrc_kde4
This works fine. But when I restart the first KDE and check with ps, I have 2 instances of conky running. The instances keep on growing with the number of restarts.
I think kde tries to restart all the apps which were running when the session was terminated. Is there a way to change this behavior in general or all the programs or for only a specific program like conky ?
Last edited by rangalo (2009-07-28 19:02:17)

I did
Systemsettings > Advanced > Session Manager > Start with an empty session
and put everything you want in Autostart

Gnome and KDE 4.1 without mixing?

I'm running Gnome and love it, but wanted to give KDE 4.1 a chance so I installed it too. When logging in (GDM) I choose whether I want to run Gnome or KDE 4.1, but when I boot KDE the kde menus are full Gnome stuff, and when I boot Gnome, the menus are full of KDE stuff. It's a mix I don't like. Either I run Gnome or KDE.
Is there a way to stop the Gnome menus scanning the KDE apps and the KDE menus to stop scanning the Gnome apps?
Besides that, when I'm in Gnome and open a nautilus bookmark from the "Places" menu, Konquerer starts up happily and makes me think, "What a mess. Is this the way it's supposed to work?"
If I want to run Gnome only and KDE only, do I need to make a dual boot with two separate Arch installations?
Last edited by thunderogg (2008-08-01 08:54:02)

The menu "problem" is due to both desktops using the standard menu item location (Freedesktop.org, I believe defines this). If you want completely separate, you don't have to dual boot with two separate Arch installs, just create a new user and make a shared data location that your KDE and Gnome user can access. For example:
/home/thunderogg could be thunderogg, your Gnome user
/home/kthunderogg could be kthunderogg, your KDE user
Create a new /home/shared folder with permissions for both users and save your documents there. That's the only way that I know of to have both installed and not have a menu mess.

Wine and KDE shortcuts

Using the Window-Specific workarounds I'm able to disable KDE global shortcuts. For example, in Diablo 2, ALT-F2 does not bring up the run dialog. GREAT!
My problem is that there are occasions that I want my full-screen wine application to loose focus or minimize; for example to make a Skype call. When someone calls me the Skype dialog and KDE taskbar pop to the front allowing me to minimize my wine application. However, I have no way of making a call without exiting the application.
I'm kind of at a loss here. I don't want to disable the KDE global shortcuts but I'd like some way of minimizing the full-screen wine application. Does anyone have a creative suggestion?

simongmzlj wrote:You could start wine games in another xserver...
Very cool idea! Google found me this: http://ubuntuforums.org/showthread.php? … b&t=634067
This is way simpler than I thought it'd be. Thanks.

XFCE and KDE question

Would there be any conflicts if XFCE and KDE were both installed at the same time or would it be wiser to remove KDE before installing XFCE?

You'll probably be fine. Both programs can edit desktop files which can effect the other. I'm not sure how KDE handles mime types though. If it uses the same database, that could cause one to effect the other.

XFCE and KDE Menus on same machine

I'm planning on installing both XFCE and KDE on a laptop and was wondering if there was any way to separate the KDE and XFCE programs in the menu. For example on KDE when I go to Multimedia under the K Menu I would see K3B and under a subfolder called XFCE or GTK2 or whatever I would see Brasero. I'd like to do the opposite in XFCE, with the KDE apps in a seperate subfolder. I seem to remember seeing this on another distro but can't remember what it was. Is there any way to do this automatically? Thanks.

As far as KDE goes, right click anywhere in the menu system or on the KDE button, and you can get into the menu editor. From there, you can do anything you want. Of course, when installing new programs, they are going to end up where ever the packager wants them.

Is X-windows and GUI desktops supported on the ODA "engineered system" running a RAC database? If it is, what is the yum command needed to install the X-windows, Gnome, and KDE package groups?

Is X-windows and GUI desktops supported on the ODA "engineered system" running a RAC database? If it is, what is the yum command needed to install the X-windows, Gnome, and KDE package groups?

While I agree with the direction of the suggestions with installing packages for X-windows, we do not have a blanket 'apply any package' recommendation.
In particular we do not support altering the kernel (although we do have exceptions which we review on a case by case basis).
Basically, if the you want to alter functionality that would not impact core functionality you are usually fine.
A good guideling is : The more dependencies that there are between the package / rpm you are considering using the higher the potential impact on functionality - meaning higher chance for problems
Note: We do use VNC including Real and Tiger regularly , but we have no hard recommendation on how you may want to use X-windows. I have never seen a limitation other than comments on bugs
or incompatibility within the X-window product itself with certain kernel levels.
Patching may overwrite some packages that you may install, however, _depending on packages/rpms added_ there is also the possibility that you will break existing functionality to the point
that patching itself will fail ( we have already seen a few cases of this in which case the proper mitigation is to remove / roll-back any alterations to the ODA before patching, and then adding the packages/rpms
back after the patching is completed.
From what you are discussing the impact should be low without conflicts, but please consider the above, and if you have specific packages which you consider potential problems
please create an SR so that we can review packages / rpms on an individual basis.
Once again: the main criteria for not supporting rpms is regarding the kernel itself
Chuck

Weird line on the right edge of the screen with fglrx and KDE Plasma

Hey there,
I am using an AMD Radeon R9 280X with the fglrx driver for my 2-monitor setup: One 1366x768 monitor on the left side, one 1920x1080 monitor on the right side. My current DE is Plasma with KDE 5, but the bug also existed (though not as bad) with Cinnamon.
Now to the problem: On the right edge of the screen is the 2-pixel-width vertical line currently in grey, which even exist in full-screen applications.
On Cinnamon the situation is a little bit different: Here it only appears sometimes, but then it flashes frequently, though full-screen applications cover it.
Interestingly I can hover my mouse pointer over it.
Here are two screenshots: One with the whole line and one showing the above described.
I configured my screens with amdccle and/or the KDE 5 display manager. Here's the generated xorg.conf:
Section "ServerLayout"
Identifier "amdcccle Layout"
EndSection
Section "Files"
FontPath "/usr/share/fonts/adobe-source-sans-pro/"
FontPath "/usr/share/fonts/cyrillic/"
EndSection
Section "Module"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
Option "RandR" "on"
EndSection
Section "Monitor"
Identifier "DFP6"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "Primary" "true"
EndSection
Section "Monitor"
Identifier "DFP7"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "LeftOf" "DFP6"
EndSection
Section "Monitor"
Identifier "0-DFP6"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "1366 0"
Option "Rotate" "normal"
Option "Disable" "false"
Option "Primary" "true"
EndSection
Section "Monitor"
Identifier "0-DFP7"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1366x768"
Option "TargetRefresh" "60"
Option "Position" "0 312"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "Monitor-DFP6" "0-DFP6"
Option "Monitor-DFP7" "0-DFP7"
BusID "PCI:1:0:0"
EndSection
Thanks for any help in advance
Last edited by Quanttek (2015-05-03 12:57:23)

ewaller wrote:Now that it interesting This only happens on the big screen?
Yes, this only happens on the big screen
ewaller wrote:Not that it matters (as the full screen display overwrites it), but what type of interface is it? HDMI, VGA?
DVI
ewaller wrote:What does the display report as its current resolution in the on screen menu?
It reports 1920x1080 as it's current resolution
As a test I changed the resolution to 1400x1050 in the KDE menu, but the monitor reports it as 1680x1050. Though the bug still persists.
ewaller wrote:What effects to you use in KDE? Although this is mitigated by your having had the problem with Cinnamon
I use the standard configuration of effects in KDE. But the bug persists even when I turn off compositing.
There is a small difference in the bug between Cinnamon and KDE: First off the line has a smaller width in Cinnamon and full-screen applications covered it.
Also it isn't an offset per se off the whole X screen, but instead only of the KDE/Cinnamon "workspace". E.g. windows snap with the line, but behind the flickering you can still see the current window, e.g. when moved to the right.
(Sorry for not answering for so long)
EDIT: Also the flickering gets more extreme the smaller the reosultion was I changed to inbetween http://i.imgur.com/WQ4fkmf.jpg
Last edited by Quanttek (2015-05-02 18:21:23)

Install internet or xorg and kde

Can you help me how to install internet or xorg and kde after arch installation? I have ADSL USB Modem Microcom AD2622, but I dont know install it in terminal. Is there any way, that I can install xorg and kde from cd? I found topic that is similiar to mine, but it wasnt solved. Here is link :
http://bbs.archlinux.org/viewtopic.php?pid=138712
I have Arch 0.7.2. Thank you

Pjotrik wrote:
Can you help me how to install internet or xorg and kde after arch installation? I have ADSL USB Modem Microcom AD2622, but I dont know install it in terminal. Is there any way, that I can install xorg and kde from cd? I found topic that is similiar to mine, but it wasnt solved. Here is link :
http://bbs.archlinux.org/viewtopic.php?pid=138712
I have Arch 0.7.2. Thank you
well lets try to setup internet 1st which doesnt look to be easy check this out
i myself would look to getting a diffrent modem , but thats me

Latest versions of firefox and kde

Can someone recommend to me the best way of putting firefox 1.06 and kde 3.4.2 on my arch machine? I see that they have been in testing for a very long time. Does that mean they they're not safe to install? I've heard that firefox 1.06 fixes some security vulnerabilities and I was thinking I should try to use it.

nirvanix wrote:
Thanks for your replies. I installed firefox 1.06 from testing, but it would not execute. Error message was:
libpangocairo-1.0.so.0: cannot open shared object file: No such file or direct
You're going to need pango from testing as well... and maybe some other things... you should probably check the firefox deps and install all of them that are in testing...

I don't want all those GNOME and KDE libs on my system!

Kde Libraries/Base/Bindings - 80 megs
Full KDE - 200 megs
Full GNOME - 80 megs
Base Gnome - 55 megs
I hear so many people saying "Ew, it's using gnome-libs I don't wanna install that" I have said this many times. It's seemed like a lot of usage on my hard drive with all those packages... In reality, 50 megs for GNOME libs or 80 megs for KDE isn't a lot at all.. Heck, UT2004 is around 90 times bigger than installing base KDE and GNOME libs. Thanks to modern technology, most PCs have 80 - 120 gigs on them.. Even with this 30 gig hard drive, 150 megs does not even put a dent. Unless your using a floppy for your hard drive, it won't hurt to install gnome and kde libaries. You need a gig and a half for just winblows stuff! Just because it says:
Targets: hal-0.2.97-2 libgsf-1.9.1-1 gnome-desktop-2.8.0-1 nautilus-2.8.1-1
nautilus-cd-burner-2.8.1-1 libdvdcss-1.2.8-1 libdvdread-0.9.4-2
libdvdnav-0.1.9-2 faac-1.24-1 faad2-2.0-5 hermes-1.3.3-1
libmikmod-3.1.11-1 gtk-1.2.10-4 mjpegtools-1.6.2-1 gst-plugins-0.8.5-1
totem-0.99.19-2
Total Package Size: 11.5 MB
Proceed with upgrade? [Y/n]
It seems like a lot of depedencies, being on four lines and all... But it's really not that much. I won't hurt to have it on your PC.
Just my .2 for the day

xerxes2 wrote:
kth5 wrote:hmm, i have exactly the same scenario on my laptop. it's only a Celeron 700 + 256MB ram. i run kde, mozilla thunderbird, several konsole session, xchat2, xmms plus some more konqueror session w/o any problem. only thing that is lagging behind is my GFX card which needs a share of the system memory. anway, my system in KDE w/ all these apps up needs only ~120MB the rest is filled up w/ diskcache or whatever. it's not bad for a desktop system that is not supposed to render 3D or viewing 100MB+ large files from memory.
I'm impressed!
I havn't tried kde since 3.2.0 and it was totally unusuable due to bugs, crashes, bloat and so forth,
the kde devs must been busy since then...
I was even quite impressed with KDE 3.3.x. I use KDM for my default DM all the time.. GDM is too buggy.. WDM/XDM too ugly... I actually made KDM look pretty sexy.. People say you can't, but it's not that hard... I'll make some screenies if anyone want some

Upgrade XF86 causes loss of X and Kde(solved)

Upgrade this day caused loss of X and KDE.
Reference made to shared libx11 not opened.
Side issue: Knoppix cannot access internet in version 3.4 or version 3.7 on the affected machine.
Virus?

Startx message: error while loading shared libraries:libx11.so.6 : cannot open shared object file: no such file or directory.

Xdg-open, magnets and KDE

I had a problem to open magnet files from chromium. The torrent client didn't seem to launch.
$ xdg-mime query default "x-scheme-handler/magnet"
transmission-qt.desktop
mime type seemed to be linked to the correct application.
Trying to launch xdg-open from terminal :
$ xdg-open "magnet:?somemagnet"
QWidget: Cannot create a QWidget when no GUI is being used
/usr/bin/xdg-open: line 513: 1568 Aborted (core dumped) kde-open --noninteractive "$1"
I don't know why this doesn't work, or why I can't find any reference of other people with the same problem.
I resolved the problem by patching xdg-open. I removed the --noninteractive flag from kde-open command, and all seems to work fine now. Still it troubles me why the xdg-open script doesn't work out of the box. Any ideas?

Related bug reports in xdg-utils and KDE:
Bug 269823 - kde-open --noninteractive foo.noassoc crashes
Bug 16295 - xdg-open is inconsistent across desktop environments (also see http://cgit.freedesktop.org/xdg/xdg-uti … bf7ce76cb3)
EDIT: I've opened a bug report at KDE: https://bugs.kde.org/show_bug.cgi?id=336117
EDIT: And there's already a bug report in Arch: https://bugs.archlinux.org/task/40795
Last edited by joschi (2014-06-12 12:24:56)

Juk and KDE Notifications

When I get sound notifications from any kde programm ( kopete for example) and when current track in Juk ended (after sound notification), volume in Juk always up to 100%.
what could go wrong?
if after notification I reset volume, it don't increase
Last edited by x1site (2013-12-02 14:45:54)

karol wrote:Are you using PA or ALSA?
https://bbs.archlinux.org/viewtopic.php?id=173731
pulseaudio

Ndiswrapper and kde problem

hi!!
i have arch with all the newst updates i use ndiswrapper and when i boot my arch i write this in the root tty1 console iwconfig wlan0 essid osv and connect to my network with dhcpcd but wen i write startx the kde is startting very slowly no i mean it wont start but wen i write dhcpcd -k wlan0 and turn of the network then it starts good
i dont know if this is in use to know but i cannot ping 127.0.0.1 or myhost localhost osv.

glad: You can make this much easier on yourself by using the 'network' daemon on the DAEMONS array in rc.conf. The comments in that file describe exactly how to properly configure it.
I use the folowing settings:
lo="lo 127.0.0.1"
wlan0="dhcp"
wlan_wlan0="wlan0 essid MyESSID"
INTERFACES=(lo wlan0)

Gkrellm and KDE

Similar Messages

Maybe you are looking for