GL A/c Balances and GL Line Item balances are different

Hi All,
There is a GL balance difference in the TDS Payable accounts for the fiscal year 2008.
The FBL3N, GL line item balance and the GL Balances in FAGLB03(FS10N) is showing the different.
I believe that there should always be the same balances reflecting in both the Transactions.
Any one explain in this regard as to why and how these differences are existing.
Thanks and regards,
kumar

Dear Babu,
I checked in all types. I mean i selected open item , all items ( from n to date wise ) etc. But the balance is not matching because of only one accounting entry. If you don't mind could you give ur mail id, so that i can send the screen shots of that.
if you have any gmail id provide otherwise some other mail id.
Thanks
Regards
sai kumar

Similar Messages

Depreciation GL A/C balance and table ANLC-NAFAG value are different

Dear All
I have faced a problem after charging depreciation I found that the balance of Depreciation General ledger account is higher than the value of Table ANLC-NAFAG
How can I find out the reason of this difference and what is the table link between BSEG/BKPF with ANLC/ANLP or any other asset table to find out this difference of depreciation charged, please advice
Regards
Sekhar

Hi Babu
Thanks for your early reply, I have tried for ABST2 but get "Current fiscal year 2010 in company code XXXX does not match the system date's fiscal year 2011."
their may be some posting for the FY 2010 in AA so I can not close FY 2010 in AA.
I have compare with ANLP and FS10N GL Balances of depreciation a/c and Accumulated Depreciation Account and found( GL Balances are equal in debit and credit side) that differences arrived in the posting period 03 only.
we have posted depreciation for the posting period 12 also. please advice how can I rectify it.
Regards
Sekhar

Derivation of Profit Centers in case of bank and Cash line items

We are in the process of configuring the Profit Center Accounting functionality. We are in ECC 6.0 but have not migrated to New G/L.
We understand that Profit center needs to be derived for each of the items for which it does not flow online in realtime. As regards Bank and Cash Line Items, we are not able to understand how Profit Center Derivation will happen.
We have posted an FI payment document using Tcode F110 and further to which we executed F.5D and 1KEK. Further to this, we have checked the Profit Center Total records report (2KEE). It updates the vendor line items. But it does not reflect the Bank line item. Unless this happens, we understand that our Profit Center wise Trial Balance will not tally.
Kindly let us know how bank and Cash line items will update in PCA. In our view, it should derive the Profit center from the offsetting entry in the vendor invoice. Pl. correct me if I am wrong.
Pl. help.
Venkat Iyer

Hi Venkat,
You may define a derivation rule in 3KEH
Regarda
Sachin

Balance(total) and line items balance difference in FS10N

Dear All,
We are facing an eccentric issue. When we execute transaction FS10N for a particular account,(outgoing cheque account) the balance it is showing is 497,241,737.46. But when we drill down to see the line items balance, it shows a different balance 497,248,376.46. The line items balance is matching with the FBL3N report.
Can anyone help me for the issue why we are getting different balances in FS10N.
Regards
Vinu

Hello,
There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
You need to identify which accounts are being changed with line item display at a later stage.
In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
3. Block the account for posting in COA Segment and Company Code Segment in FS00
4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
5. Now, remove the block you kept on the GL Account in FS00.
This will reset the line item display retrospectively.
Hope this will solve your problem.
Regards,
Ravi

Difference in GL Balance display and GL line item display

Dear All,
Can any one help me why the difference between GL display and GL line items display?
Thanks in advance
regards
Elan

Hi,
You can do the following:
1. carryout gl balance carryforward from previous to current year : Use t.code:F.16
You can cross check the fs10n balance with FBL3N balance from previous years. Assume these balance are matching for previous year 2007 and 2008, you have this problem only in 2009, then you can carryforward this balance from 2008 to 2009 once again. Some times users may post some adjustment entries as per the auditors recommendations. If this balance is not matching from 2007 itself, then first carryforward the balances to 2008 then 2009. You can run this transaction no of times.
2. check the master data of gl account through t.code:FS04, whether any changes has been done to line item display field?
If you find any changes to line item display field then run the program "RFSEPA01" to get all the line items.
3.If your issue was not resolved even after the above two activities, then let me know the sap version you r working.
all the best
Prasad

Runtime error - FBL1N - vendor balance with customer line item

Hi gurus,
One scenario where i have assign vendor as customer & customer as vendor in vendor & customer data. also make tick mark for both clearing with vendor & customer.
when i see the customer report with vendor item it shows me the customer & vendor dues but when i tried to see the vendor balance with customer line item it gives dump error.
Runtime Errors         PERFORM_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FORM
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FORM', was
     not caught in
    procedure "%_LDB_CALLBACK" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The program "RSDBRUNT" is meant to execute an external PERFORM,
    namely the routine "CB_DDF_GET_KNA1 " of the program "RFITEMAP ", but
    this routine does not exist.
    This may be due to any of the following reasons:
    1. One of the programs "RSDBRUNT" or "RFITEMAP " is currently being developed.
    The name "CB_DDF_GET_KNA1 " of the called routine may be incorrect, or
    the routine "CB_DDF_GET_KNA1 " is not yet implemented in the program "RFITEMAP
    2. If the program SAPMSSY1 is involved in the runtime error, one of
    the function modules called via RFC is not flagged as remote-capable.
    (see Transaction SE37 Goto -> Administration -> RFC flag)
    3. There is an inconsistency in the system. The versions of the
    programs "RSDBRUNT" and "RFITEMAP " do not match.
Warm regards,
Dhananjay R.

Hi martin
still problem was not solved. actually i am working on ECC 6.0 & not required to implement the sap note on development. i had done the configuration in vendor master & customer master for clearing.
please suggest me.....what to do ?
Than'x
Dhananjay R

Profit Center in Customer and Vendor Line item

Hello Guru
i have one doubt we have activated the new GL in one of client for profit center level. while posting through any of financial transaction particularly customer and vendor there is no filed for input parameters for profit center. while booking these kind of transaction system pick up the dummy profit center. even our field status group for gl master data and posting key made as optional PCA filed not displaying. client want it should be pick up automatically from line item and should be input parameters.
how to resolve this issue please let me know.
waiting for your reply
Thanks & Regards
Laxmi narayan

Hi,
You are saying that u have activated New G/L, but are u gone for document spliting also or not? if you have activated document spliting customer and vendor line items not at all required any profit center because it will petch the profit center from oppsite line item automatically for giving tallyed balance sheet at profit center leavel, so no question profit center required or going to dummy profit center because dummy profit center will be locked automatcially once u activate document spliting.
if you have not activated document spliting then customer and vendor line items may require profit center its depends on your field status settings, if you feel that it should not go to dummy profit center then maintain some profit center in 3keh & 3kei settings for customer and vendor reconcliation accounts, so that it will post to that profit center.
Thanks & Regards
T N R

Profit centre needs to be updated in Vendor and Customer line item reports

We are using ECC 6.
Profit centre is updating for vendor and customer line items in document level. But the same is to be reflected/updated in profit centre field in FBL1N and Reports.

hi
Use this T codes you will get Profit center wise S_AC0_52000888 Paybles (vendor balances )
Tcode for Profit center wise receviables S_AC0_52000887 (customer balances )
Regards
Babu.k

Reset Cleared Doc - Balance of the line item is not zero" Message no. F5136

I have this error : Balance of the line item is not zero" Message no. F5136
This error arise when we tried to reset cleared document dated June 6,2007 during data migration from Legacy system to SAP.
We wanted to reset this cleared document because it was wrong executed (cleared) way back 2007.
The entries are:
Debit to GL (B/S) --> 3,758.48
Credit (1100039-Vendor) with special GL (408319) --> 3,758.48
=====================================================
For us to correct the clearing, we need to reset first the cleared document via FBRA, however, this error arise saying "Balance of the line item is not zero" with Message no. F5136.
I read several posted issue here, however, it doesn't resolve my problem.
Hoping to hear from your inputs on this problem.
Regards,
macalonge

Dear:
SAP Note 400530 - FBRA - F5136: Balance of line items not zero
describes your issue as
Summary
Symptom
A payment using a payment card fails, in other words, the payment is reversed using Transaction FBRC where the customer or vendor item is reopened.It is not possible to reset a payment document posted again for the open customer or vendor item by using Transaction FBRA, "Reset Cleared Items" and it responds with the error message "Balance of the line items is not zero".
Other terms
Error message F5136, FBRA, FBRC, payment cards
Solution
A solution is available in the Support Package for Release 4.0B and 4.6C. An advance correction is possible. The solution consists of a repair report, so that the current payment document can be reset by means of 'Reset Cleared Items', and of a correction.
1. Repair-report ZREPAIR_BSEGC_FBRA:Create it temporarily as a test report using Transaction SE38. First the current payment/clearing document must be cleaned up of payment card data by means of the repair-report. Afterwards you can reset the payment document by means of 'Reset Cleared Items'. The report takes the current payment document as a parameter. In this case only changes are made to the database if the option "DO_UPD" is set.
2. Advance correction:Supplement the interface for function module CREDIT_CARD_POST_REFUSAL with table parameter T_BSEG with reference type BSEG. The following describes the procedure in more detail.
a) Transaction SE37: Enter function module CREDIT_CARD_POST_REFUSAL and choose "Change".
b) On the "Tables" tab page, create parameter T_BSEG with reference to structure BSEG.
c) Save and activate the function module.
3. After you implemented the correction or the R/3 Support Packages valid for this note, read Note 450081 to avoid the unwanted deletion of payment card data.
Hope it will help
Regards

Balance of the line items is not zero

Hi All,
We are trying to reverse the clearing document t.code FBRA but could not reverse it and getting below mentioned error.
Balance of the line items is not zero
Message no. F5136
We have implemented the S note 1914004 but the results are the same.
Thanks
Ramanjaneyulu

Hi Ramanjaneyulu,
If you reset a clearing with transaction FBRA, a check of zero balance
occurs first in all local currencies. With a balance that is not equal
to zero the system issues message F5136 and it is not possible to reset
the clearing.
Regarding your issue itself, based on my analysis of the information
provided and from previous experience with error message F5136 when
running FBRA please let me highlight some of the most common reasons
for this error to be raised:
- GL account is being changed by any substitution: HKONT is expressly
forbidden for substitution (check BXCLUDE from table GB01 by standard
the field is flagged) if this field is being changed by a substitution
or user exit this is most likely the root cause for error message
F5136, however as this is considered a modification it falls of the
product support scope.
- Documents involved have being archived: Since the related documents
are archived, the balance of document is not zero and error message
F5136 appears. It is not possible to reverse
the clearing document because system cannot find the documents that
were cleared to change their status to open.
- Any of the documents contain field BSEG-RFZEI <> 000: This kind of
document cannot be reversed via FBRA. Please refer to note
1301679 this note contains valuable information regarding
this system behavior.
I hope this could be helpful. Thank you.
BR,
Jimmy

New GL: Balance carryforward w/line items

Hi guys i am having issue with new GL: Balance carry forward w/line items. totals are working fine but i am having issue with line items
i did applied with note SAP Note 1153947. some how the balance carry forward is not writing line items to period 000. is there any one had this problem?
what i need to do if note is already in PLace?
i am exacting data from ds FAGLFLEXA, FAGLFLEXP and FAGLFLEXT
please do let me know if you guys have any solution for this?

Hi hsakhan ,
Technically, you can transfer the balances using F.16 where the balances of the G/L account will be carried forwarded into the new fiscal year.
But the financial statements for the closed years have to re-stated which is a big deal (especially if the company has gone public). You might want to check this with internal audit in either case before you do that in production.
Sreeram

Cumulative GL Line Item Balance Report

Hi,
Can anybody suggest Cumulative GL Line Item Balance Report in SAP.
thanks in advance
Muhammed Riyas

Hi Ryas,
This means you are looking for a report of GL Account Statement, where you can have all GL Line item (documents) and thier total also,
You can use S_ALR_87012332 report, you can also add column total debit and total credit column, then sum of all the line item you can see against each gl, please see below output snapshot.
Regards
Javed

Balance of the line items is not zero in FBRA

Hi Team,
we are resetting customer cleared docuemnt using FBRA t ocode it giving erro message like "Balance of the line items is not zero". we tried all possibilities, but it is giving same error. we search in SCN.SAP and found one note 1914004. but we are unable to download it. we tried
FBU8 - Reverse this tcode also. but same error.

Re: Problems reversing a Clearing document
udayakumar krishnaraj Nov 9, 2011 9:15 AM (in response to Reddy D)
Hi,
Use transaction code FBRA for Reversal of Clearing Document.
System will ask for2 option
1. RESET
2RESET and REVERSE
Select 2 option you clearing document will get reset I.E become open and then it will get revered automatically.

Profit Center population in the Vendor and Customer Line items

hello
our client is asking for getting profit center in the vendor and customer line items where in the view FBL5n and fbl1n we are not getting the profit center populated - in the new gl i understand that there is a standard report based on the gl account.
but our business is not satisfied with the report and expecting report at profit center level.
Can any one suggest any way of doing this.
regards,
Vijay

Dear Vijay,
Let me provide you my view of solutioning for this. This is an enahcement that needs to be done
1. You can get the profit center from the given vendor and customer line item at the time of posting, using an enahcement you will be able to capture it.
2. Existing the profit center field is not populated in the BSIK,BSAK,BSID and BSAD tables
3. Hence, in the same enhancement once you capture the profit center , you can write the code that profit center is updated in these tables also.
4. This will help you to do the vendor line item wise selection in the FBL1N, FBL5N profit center wise.
Constraints of this solution:
The only constraint remains where in the for a given document if there are multiple profit center, then the system will do the splitting profit center wise for a vendor line item, which will not populate the profit center in those tables as there is only one field available in the bsid etc.. tables.
This basically would be the one the soltuion where in as seeen from the end user ther eis no change in the front end interface , the way they are doing always they can do.
You need to also take care the % of document splitting means cross profit center postings /cross document splitting charactericstics postings and the volume involved in this. so that you can suggest this to your client.
Regards,
Bharathi.

FBCJ LINE ITEM AND FI LINE ITEMS ARE DIFFERENT

Dear Expert
FBCJ LINE ITEM AND FI LINE ITEMS ARE DIFFERENT

Hi,
It seems from the screen shot you are seeing different documents as in the first screen shot it clearly shows you have booked the multiple expenses under one see the below screen shot we have circled it
whereas FB03 screen shows different.
You can do one thing click on circle item and check the expenses involved in it and accordingly go to FBL3N and display documents for that G/L for the date 05.04.2014.
Hope your issue has been resolved else revert.
Regards,
Tejas.

GL A/c Balances and GL Line Item balances are different

Similar Messages

Maybe you are looking for