GL account and cost center field appearing for Goods issue movt type 201

Hi SAP Gurus
We are trying to post goods issue in ecc6 . The problem is that the GL Account and cost center fields are available fields .The cost center field is logical but why the GL account field is avaiable .
How we can grey out the same field as it is going to be picked up from the valuation class setting in GBB - VBR ? Any ideas
Regards
Hitesh

Hi Ravi
You think that its ok we have to input the cost center .
But if you allow the users to input the GL then you are overriding the whole purpose of defining the valuation class and offsetting entries ? What is your opinion ?When you input the material in the goods issue screen the offsetting entry needs to be picked from the GBB -VBR .Although even if you do not enter the GL the system posts the Godds issue document .But from the control perspective this needs to be suppressed .
What do you think ?
I have also posted the same in Logistics forum .
Once again many thanks for your help .In case you find some solution this would be of great help
Regards

Similar Messages

Control G/L account and Cost Center for movement type 251

Dear Friends,
I would like to use mov. type 251 for GI for sale and like to control over G/L account and Cost center.
The G/L account is by default from the valuation class of the the material and if the user will enter wrong G/L
we had done the customising in OMJJ movement type 251 - Account grouping - Unchecked the check box of column
"Check account assignment" - Impact is " the system always uses the G/L accounts or account assignments determined automatically"
I also made default cost center for G/L account and plant wise through OKB9.
Now I would like to suppress/dispaly the G/L account and cost center - for same I had done Setting in Entry control menu of OMJJ for 251 of field Account control - Value - "-" field is suppressed. But it is not working.
Please advise to solve this situation.
Thanks & Regards
Rajan

Dear Rajan
Yes, I have checked in MB1A earlier. We have separate node for Field seletion layout for Enjoy transaction MIGO for mvt type in which the G/L account (KONTO) an Cost center (KOSTL) have only optional or required entry selection.
warm regards
Ramakrishna.

Not updating G/L account and cost center with BAPI BAPI_PO_CREATE1

Hello Friends,
The two fields G/L ACCOUNT and Cost Center is not updated using BAPI BAPI_PO_CREATE1. I am unable to understand why? This is what i am passing to account assignment structure( POACCOUNT). Filled POACCOUNTX structre as well. I have passed company code at the header level.
PO_ITEM = 00010
SERIAL_NO = 01
CREAT_DATE = sy-datum
GL_ACCOUNT = 621000
COSTCENTER = 1000
CO_AREA = 4000
Please let me know why it is not updating anything i missed while passing?
2>I need to update GR quantity but this field is not available in the BAPI ..Please let me know how to update this field.
Any help is highly appreciated.
Regards,
Raj

Hi, I have a problem I use the bapi BAPI_PO_CREATE1, I pass the table pt_poaccount in the parameter poaccount but the bapi when register my purchase order doesn't register correctly the values KOSTL, AUFNR, PS_PSP_PNR, NPLNR of the tablepoaccount and register the default values of the contract. Please i need help with this.
CLEAR s_poaccount.
     s_poaccount-po_item     = <fs_datos>-ebelp.
     s_poaccount-serial_no   = w_serial.
     s_poaccount-costcenter = <fs_datos>-kostl.
     s_poaccount-orderid     = <fs_datos>-aufnr.
     s_poaccount-wbs_element = <fs_datos>-ps_psp_pnr.
     s_poaccount-network     = <fs_datos>-nplnr.
     s_poaccount-activity    = <fs_datos>-vornr.
     s_poaccount-quantity    = <fs_datos>-menge.
     s_poaccount-net_value   = <fs_datos>-brtwr.
     s_poaccount-creat_date = sy-datum.
     s_poaccount-itm_number = <fs_datos>-ebelp.
     s_poaccount-co_area = '1001'.
     APPEND s_poaccount TO pt_poaccount.
CLEAR s_poaccountx.
     s_poaccountx-po_item     = <fs_datos>-ebelp.
     s_poaccountx-serial_no   = w_serial.
     s_poaccountx-po_itemx = 'X'.
     s_poaccountx-serial_nox = 'X'.
     s_poaccountx-creat_date = 'X'.
     s_poaccountx-itm_number = 'X'.
     s_poaccountx-co_area = 'X'.
     s_poaccountx-costcenter = 'X'.
     s_poaccountx-orderid = 'X'.
     s_poaccountx-wbs_element = 'X'.
     s_poaccountx-network = 'X'.
     s_poaccountx-activity = 'X'.
     s_poaccountx-quantity = 'X'.
     s_poaccountx-net_value = 'X'.
     APPEND s_poaccountx TO pt_poaccountx.
CALL FUNCTION 'BAPI_PO_CREATE1'
     EXPORTING
       poheader          = pe_poheader
       poheaderx         = pe_poheaderx
     IMPORTING
       exppurchaseorder = pi_exppurchaseorder
     TABLES
       return             = pt_return
       poitem           = pt_poitem
       poitemx         = pt_poitemx
       poschedule    = pt_poschedule
       poschedulex = pt_poschedulex
       poaccount      = pt_poaccount
       poaccountx    = pt_poaccountx
       poservices     = pt_poservices
       posrvaccessvalues = pt_posrvaccessvalues.
The BAPI is register with these values as default however i pass other values in table
pt_poaccount

No functional area derived from GL account and cost center ccombination sel

Hi,
When doing a goods issue for a delivery, am getting this error. Hope somebody could advice.
"No functional area derived from GL account and cost center combination selected."

Hi,
Go to FS00 and specify the functional area for the gl account. Go cost center change mode specify the functional area. Define the f area in Tcode OKBD, FSP2,KA02,KS12,
Hope this is clear, if yes assign points
Regards,
Sankar

G/L Accounts and cost center

i would like to find the list of valid G/l Accounts and cost center for a input company code. Is there any good tables for getting this information. ?

I don't think there is such a thing. If a GL is valid for a company code and a cost center is valid for the corresponding controlling area, then the transaction should post. A relationship between controlling area and company code is in table A059 (Controlling Area/Company Code). This table is empty in our system, so I don't think that checks will be made.
Rob

Purchase Order Field and Cost Center Field Non Editable In F-48

Hi Friends,
I have a cretain requirmnet to make the PO and cost centre field non editable.I tried through shd0 bt it says i can only cretae Transcation variats for Dialiog tran.Please help
Regards,

Hi,
You can speak to your functional people. I think through SPRO "Maintain Field Status Variant' under Financial Accounting ->........
we can control this.

Gl account and cost center in fb01

hi,
1 may i know why balance sheet account allowed to have cost center? in fb01, when i enter balance sheet account, cost center field is available.
2 why vendor or customer account not allowed to have cost center in fb01?
thanks
rgds

Dear,
Asset is one of your balance sheet account and it is often a need to track assets based on cost center so that it is available.
Vendor and customer are never tracked by cost cetners but the profit center. Because cost center are often like Production, Administration, Sales etc.
So vendor can not belong to aspects like sales, production etc. Moreover vendor and customers derive profit center from offsetting line item. Both cost centers and profit centers are not available in line item.
Regards,
Chintan Joshi

Default cost center not appearing for certain users

Hi Gurus,
We are on SRM 4.0 classic scenario.
For certain users when they create SC in SRM the default cost center is not automatically taken into account even if they change it to it. The default cost center was changed for these users and some of them still refer to the old cost center no. which was maintained for them.
The users are not defective and the except the cost center all other attributes work fine. I have tested by deleting & recreating new BP no. for the users but it still doesnt help. Please advise.
BR,
Sambit

hi
check if the users are correctly mapped into org structure (ppoma_bbp)
than check if theri Position are correctly mapped with the default cost center (ppoma_bbp; tab attributes; cost center
regards
andrea

G/L account and cost center in Delivery

Hi,
When we create the deliveri, first in sales order user only enters and func center, that fuind center comes in the deliveri goods movement document, along with that when i check in MIGO document display along with fund center i can see the cost cenert and g/l account for which that document is posted, In our system we are using same chart of account for two compnay codes, and in OBYC for GBB-VAX we have maintain one G/L account 893011, and in cost element for this 893011 we have assign one cost center for one compnay code that cost center is OK but for othere one we want to assign different cost center, by keeping the same account, how we can do this.
regards,
zafar
Edited by: zafar_karnalkar on Jan 6, 2011 6:36 AM

Dear Zafar,
If you desire you maintain two different cost centers for the two company and you need to have both of them posted on the same G/L account and Cost element, I would advice you to:
- create a Z table where by controlling area you define where the specific cost center need to get posted
- include this validation check in the exit for validation for controlling
- include this validation check in the exit for validation for finance
- include this validation check also in the sales order user exit
Standard SAP seems do not have direct link between cost centers & cost elements. For this reason ideal solution is to generate a table where you may define you needed structure.
E.g.: some ideas on the table you may create
Controlling area
Cost element from
Cost element to
Cost center from
Cost center to
I hope this suggestion may answer to your need.
Regards,
Viviana A.

Cost center not appearing for G/L (Balance account) while posting

I have created symbolic account 1300, accrued leave pay with account assign type as F.
I hvae assigned the relevant G/L to this symbolic account under 'assign balance sheet accounts'
However while posting, the relevant cost center assignment is not captured next to the G/L account.
The cost center is correctly maintained in IT0001 and is displayed for the other expense accounts. But is missing for all balance G/L accounts.
Please guide
Ally

Hi Ally,
I have similar requirement, can you please let me know what did you changed in the Posting Variant.
Your help is much appreciated, and rewrded. Waiting for your reply.
Thanks,
Janga K.

Profit center accounting and cost center relationship

Experts, in the future as we look to tie the PCA cube with the CO cube, the referential integrity will be important. What I see as being important is capturing the profit center, cost center and account that was used at the transactional level and not from an arbitrary hierarchy. As such, in the PCA cube, it would be optimal to have the cost center assigned to the transaction be available. This assumes that the PCA totals are by profit center, cost center and account. Furthermore, I will want to build a jump target from the PCA cube to the CO cube where we can see this data by cost center and cost element or vice versa. There seems to be some uncertainty on if the PCA cube has the cost center informaiton, so how would I do this?

I don know if i understood it correctly but If you assign you profit center in your cost center you should be able to get all that you need.
Assign points if helpful

Internal Order settlement to both G/L account and Cost center

Gurus,
When I am trying to settle Internal Order to both Reciever categories G/L and CTR(cost center) in a single internal order master.
Cost is getting settled from Sender to reciever only using CTR. Reciever category G/L(B/S account) is not getting used and cost is not getting into G/L account receiver.
Can't we have this scenario ? Or Is there something I need to do ?
Thanks in Advance,
GB

Hi GB,
This is possible. Kindly check your distribution rule and ensure that the GL account (settlement receiver) has a share, in percentage or in amount.
Regards,
Darrel

Cost center field disable for few end users

Hi all,
Can anyone help me in setting the field Cost center in display mode so that the change of cost center can be restricted in Equipment master record. This should be affected only to a few users while others can have the access to change mode. How do i achieve this....
Thanks,
Murad...

Hi,
As this is User based setting, this could be achieved only through User Authorisation.
Even Authorisation group is also editable in Equipment Master, I am not sure how much it will be feasible to achieve your requirement.
Else give Change mode access (IE02) to particular people who are authorised to change any details like Cost Center.
In case of other people, have a word document (like Change Request), so that changes could be tracked.
Regards,
Maheswaran.

Post proft segment and cost center in a sales order with value type 4 in CC

Hello,
We have CO-PA activated in SD. When we create the Sales order the field "Profit Segment" is automatically filled (with the characteristics values) and additionally we field manually the cost center.
The main problem is that when we post in the two CO objects the cost center becomes automatically with value type 11 "Statistical Actual".
In the end of the month we need to do the Assessments (KSU5) from the invoices created from one cost center to various cost centers but since the cost center in the invoice has "statistical actual" value type we can't do the assessments.
Is there any way to post in profit segment and in cost center and the cost center becomes with value type 4 "Actual"?
Thank You

Hello,
Thank You for you answer. I have one more question.
Is there any way to desactivate the field "Proft Segment" only for a specific document type?
I've already tried in transaction KE4W and system is not creating now the Profitability Analysis document but this field "Profit Segment" is still with values so the cost center is still with value type 11.
I've tried to delete manualy the values in the field Profitability Analysis but system gives me an error related with incomplete data in sales order. I've look in SD customizing and this field is not configured in the incomplete data messages
Best Regards

PO with account category and cost center as mandatory fields.

Hi everyone.
Pls. I need help with the next proces.
I have to customize a PO with Account Category as mandatory and the PO always must have the same G/L account and Cost Center.
Thanks for your help.
Regards.

Hi..
Maintain Default Cost Centers for the Cost Elements in OKB9 transaction..Please check with your Controlling Consultant for this...
And SPRO > MM > Purchasing > Account Assignment > Maintain Account Assignment Categories > For Account Assignment Category (For e.g. "K" - Cost Center), in detailed screen, "Derive acct. assgt." should be active
Cheers
Ravi.

GL account and cost center field appearing for Goods issue movt type 201

Similar Messages

Maybe you are looking for