GL account based on account assignment group

Set the GL account based on the account assignment group of the customer. How is it done?

hi Zarah,
in enhacement SAPMF02D you can check if the right recon. account is selected, however you cannot change, but you can issue an error message.
hope this helps
ec

Similar Messages

  • Set outgoing account based on address book group

    Hello -- I am looking for a way to automatically set the account of new outgoing messages based on the address book group membership of the email recipient. For example, a script or rule that works something like:
    If [any recipient] belongs to group [employer1] set message account [employer1];
    If [any recipient] belongs to group [employer2] set message account [employer2];
    If [any recipient] belongs to group [personal] set message account [personal];
    etc.
    Paul Berkowitz has written a very clever script to do exactly this for Entourage (see http://scriptbuilders.net/files/otheraccountx2.0.5.html) but I have been unable to locate an equivalent for Mail.app.
    I would very much appreciate any suggestions regarding where to find (or how to build) a script, automator workflow, etc. that accomplished this task.
    Thank you!
    Adam

    V.K. wrote:
    for some reason it can only script changes to messages that were initiated by apple script. At least that has been my experience. I would be VERY happy to be proved wrong on this.
    Thanks for the feedback. Assuming your point above is correct, is it possible to create a script or workflow that initiates a new outgoing email message then changes the account to something other than the default? For example, I might might disable [cmd-n] for new messages, then set up new shortcuts linked to simple scripts so that that [ctrl-cmd-A] would initiate a new message with the account set for Employer Alpha and [ctrl-cmd-b] would initiate a new message with the account set for Employer Beta. An alternative solution might be to write a script to replace the usual [cmd-n] with a simple dialogue box that forces me to make a conscious decision about the From account every time I initiate a new outgoing email message.
    My goal here is to prevent a situation in which I forget to manually switch from the default account to the correct account for an outgoing message, thus inadvertently sending email from the wrong address. Either of the solutions I described in the paragraph above would meet my needs... might one or both of these might be possible?
    Thank you again for your support,
    Adam

  • Rev account determ based on customer account assign group of ship to party

    Hi
    In our company revenue account gets determined based on Sales org/cust acc assignment group / mat acc assignment grp / Dest Cntry / ActKy (VKOA table 502) . Customer account assignment group and Dest country are from sold to party customer account assignment group.
    Our client wants these to come from ship to party rather on sold to party, I checked fields and tables in SPRO-> sales & dist  How can we achieve this?
    Thanks,
    Vaishnavi

    Hello,
    As per my knowledge, the Dest country, Shipping Address & other shipping related data are determine from SH-Ship to party.
    Whereas, pricing & shipping condition related data are determines from Sold to Party.
    To add 501-Sales org/cust acc assignment group / mat acc assignment grp / Dest Cntry / ActKy for your VKOA is not a standard table. check the same using tcode in V/14.
    Thus, I like to conclude by stating that the Destination country is actually is determined from Ship to Party, not Sold to Party and the table suggest/maintain is the best solution to your customer requirement.
    Thanks & Regards
    JP

  • How to maintain different account assignment group for a material

    One of our items in plant A was extended in B to use in an business scenario.
    Since the item was extended using the copy function every change
    made in A seems to affect our Item master in B . What governs this?
    Since the item is manufactured in A the Acct. assignment Group in
    Sales Org. 2 is set to 01 manufactured item, while for B it is a
    purchased item and so 03.
    Please let me know how to go a head with this.

    Hi
    As per standards and logics a material can be created only once in MM01
    In MM01 we create a material say pen under some organizational data and that includes plant, storage location,sales org,DC,warehouse etc
    If you are extending the same material to another plant the same can be done in MM01 with the new organizational data and after that if you hit enter you will get a message that the material is already created and extended to such and such data
    In that exept the basic data 1 and 2 many or most of the fields can be changed
    I have checked account assignment category in sales org data 2 can be changed
    Say for plant 1000 for material pen assignment category can be 01 and
    plant 1001 for the same  material pen assignment category can be 02  like that
    The extra keys for account assignment categories are defined in t code OVK5
    img-sd-basic functions-account assignment and costing-revenue account determination---check master data relevant for account assignment
    Relevant VKOA settings to be done
    Then based on plant (in sales order) diffrerent GL accounts will be picked
    So a same material with respect to the organizational data can have different account assignment categories
    Regards
    Raja

  • Material Account Assignment Group, in Sales Order Mass Update

    Sd Experts,
    We just went live, our consultant updated Account assignment group at the material level but did not updated existing materials. When we caught the problem and updated exisisting materials there were some existing orders already created. Which now I am getting an account determination error due to this field being empty at the material level.
    We have some sales orders that I need to update but they are just too many, currently I have been fixing them thru VF02, for to the material and update manually.
    Does anyone has any idea how to mass update this field for all existing orders, to update "Account Assignment Group" field automatically
    Your help will be greatly appreciated.

    Hi
    In Mass transaction choose object type as #BUS2032,after executing in the next screen from the tables choose#Sales Order Item Data, and from the fields choose#AcctAssgGr (MASSSDHE)-MASSSDHEAD_S-KTGRD, now execute to find fields Sales document and Sales Document item , here load all the Sales Orders for which the change is needed along with the items for which the changes are needed execute again to find the next screen with Sales Documet, Sales Document item and Account assignment which needed to be changed,now select the entire block enter new values in the Account assignment  box in the above, click on the 'Carry out MAss change button ' and then save, it will take some time basing the change tobe carried and issues a log as to how many documents were changed
    Hope this is clear,please do a test run before.
    Regards
    Chandra

  • Diifferent Accounts based on Valuation Class /Material group  Shorttext -PO

    Hello Sapient
    We need to differentiate the Posting for short text PO . we want  the Asset  / Office supplies / Services to post in to a separate G/L Account .We seperate it by Material group , but the posting cannot be done by valuation class assigned to the material group . How can  we handle  the WRX using valuation class or by any method. what i am referring is all for PO without material master. .
    Thanks
    Jeevan

    Hi Jeevan,
    You are absolutely right. I am also facing the same problem. In our case also we do not have a material master. We have created a PO with short text and with a material group. We have assigned a valuation class to this material group.
    We have used account assignmed category "P" for the PO.
    For the debit posting i.e. for GBB-VBR its taking the GL account based on the valuation class, but for WRX its not taking the GL account with the valuation class.
    We want to have different GR/IR account (say 108) for domestic PO's and different GR/IR account (say 109) for Import PO's. We are not able to do this diffrentiation because in OBYC in WRX, while doing MIGO the system is picking only that GL account for which the Valuation class is blank.
    I don't think there is a solution to this. If you find any then pl
    pease let me know.
    But if you don't want to segregate the GL Accounts in WRX then the simple thing for you to do is in OBYC WRX maintain the GL account without Valuation class. Your problem will be resolved.
    Rgds
    Prasad.

  • G/L account determination through material account assignment group

    Hi ,
           I would really appreciate any help on this . The scenario is .
    We changed the account assignment group of maetrial to 01 just 2 days back.
    We have old open sales order line up for this particular material . When I am trying to Bill these open orders , the system is not recognizing the account assignment grp change which happened 2 days back ,because of which I am getting a A/C determination error .
    This is a I/C order and we have PO linked to it. I am suggesting to back out everything (Do Invoice reversal,MIGO cancellation,PO cancellation , then cancel invoice ,delivery and sales order ) so that we can create a new cycle and  the system will recognize the account assignment grp change and determines  the G/L whwn it comes to acounting .
    1. Is this the right way
    2. Is there any other way by which I can make the accounting happen
    It was very obvoius that when I see the account determination analysis ,the system wasn't able to find the account assignment grp for the material .
    Thanks
    Sridhar

    Dear Sridhar
    First of all, I dont think, you will be able to change the Account Assignment Group of a material in sale order if any subsequent document is generated bcoz the said field will become uneditable.  Moreover, via MASS, this is not possible as the field name of Account Assignment Group for material (KTGRM) is not available in MASS.
    So the other option is via MASS, you can assign Reason for Rejection for existing orders.  To assign Reason for Rejection in bulk is run T.Code MASS, input [BUS2032]  as Object Type and execute.  There block he Sales Order Item Data and click on Fields and block the field MASSVBAP-ABGRU and execute.  Input the sale orders if possible otherwise leave it blank and once again execute.  Now you can assign Reason for Rejection in mass.
    Meanwhile, you have to create new orders for all those open items.
    thanks
    G. Lakshmipathi

  • Account Assignment Group for Customer........

    Hi Experts,
    We have created few new account assignment groups as per our customer requirement.....now if we want to update those new AAG for the already created documents like open sales order,sale order with delivery & open billing,how to proceed with that?.....any transctions do we have to execute this?.........Looking forward for your reply..........
    Regards,
    S.Kumar

    Hi,
    You can change the account assignment group in completely open orders via tcode "MASS" by selecting object type BUS2032.
    since the account assignment group will be picked from sales order, need not to be changed in open delivery or billing.
    Also for partial processed order would advise pls do not change the account assignment group. Another option could be to close the open orders and creat equivalent qty new order with correct account assignment group.
    Pls check & revert.
    Regards
    Sanjay

  • Change in Account Assignment group in Open Sales orders

    Dear All
    In SAP 4.7 there are 100 nos of Sale order item having Account Assignment Group .
    I need to change the account assigment group field from open sale orders, but the field is grey.
    Is it possible to change the subject field.? Please help
    Regards
    BGLimaye

    If I am correct, even in creation mode, this field (Account Assignment Group) will be in grey mode and cannot be maintained manually in sale order. 
    Whatever you maintain in material master, that only will flow.  Due to some reasons, if the same is not flowing in sale order and you want to rectify this,  if you ask me, the only option is close those line items, maintain the account assignment group in material master, create LSMW for VA02 and include as new line items.
    thanks
    G. Lakshmipathi

  • Report as per Customer Account Assignment group or Material Account Assig

    Hi,
    I require report as per customer account assignment group or material account assignment group.
    Can you please tell me how to fullfill this requiremetn.
    I have go for ZReport or any standard report is available.
    Regards,
    ch.srinivas

    Hi,
      You could have gone for a query but unfortunately,you cannot use table TSTMT in a query so I think ZREPORT would be a better option.
    Regards
    Karan

  • How to grey out the Account Assignment Group Fld  in Billing Doc Line Item

    Hi SD Guru's
    I have a small doubt.
    I have maintained account assignment group in material master. Now when i create an order , the account assignment group gets picked from material master into this sales order.
    Now i go to VF01 for doing the invoicing.
    Now i can still go to billing document line item against the material and change its account assignment group before raising the invoice. When i change this field, i can still post to accounts.
    I want to know is there any way in which we can restrict the way in which this field is greyed out and is made non-editable, so that only correct entries with account assignment group maintained in material master are posted.
    Answers will be appreciated.
    Kind Regards
    Ravi

    Hi,
    Sandeep can you please give me step by step process of using SHD0 in this case.
    Now if i apply this to transaction VF01 and VF02, would it apply for all billing document types? I dont want that, i want it to work for a specific billing type
    Kind Regards
    Ravi

  • Material type and account assignment group relation

    Hi,
    Getting an error while creating material master save. Account assignment Zx can't be with Material Type Zxxxx.
    Please advise where is the link maintained between material account assignment group and material type.
    My material is Z service material.
    As I no for plant,industry, material type valuation class quanity update tick required but that is for stockable materials which is not the case above.
    Thanks

    HI,
    You can make the field Account Assignment Group of Material Master as inactive.
    But it depends up on Plant, Industry Sector Type and Material Type.
    You can do this in IMG --> Logistic General --> Material Master --> Field Selection
    Or
    use SHD0.. give T-code MM01. and you can deactivate the field.
    Hope this helps you.
    TC
    BR
    AKS

  • The material account assignment group is missing in sales Order creation

    Hi Gurus,
    When creating the sales order the material account assignment group is not copied in the sales order line item. 
    For eg: when the sales order has 5 line item for one of the line item the material account assignment group is not getting copied. 
    I checked the material master - A/C assignment group was maintained.
    I checked the revenue account determination every entry is maintained with respect to GL account. 
    But even though while creating the sales order the line item does not have account assignment group. Due to this i could not able to release the billing doc to accounting.
    Please if any one can help in this regard to solve why the account assignment group is not copying in the sales order line item while creating.
    Thanks in advance.
    Jack

    Hi,
    May be the system is not updating the data. Try creating a new sales order to check. Also check the division of the product for which the acct *** grp is not showing.
    Check whether the acct assgt group which you have maintained in the matl master and that in the acct determination (VKOA) is the same.
    Reward points if solution helps.
    Regards,
    Allabaqsh G. Patil

  • About account assignment group in Sales Order.

    Hi gurus,
    I am working in SD for the first time and I am facing below problem
    1. Material code was created  with account assignment group (MVKE-KTGRM)  as blank (Sales Org 2 view)
    2. Later this material was entered in Sales Order.
    3. Subsequently Sales Order BOM and Production Order were made against this material.
    4. We maintained account assignment group in material master after creation of Sales order but account assignment group was not updated in Sales Order.
    5. Now the field is gray out or non-editable is there any way by which we can maintain account assignment group in the sales order.
    6. As the field is non editable we are unable to do Invoice by VF01.
    Is there any way by which we can maintain account assignment group in Sales Order??
    Edited by: Deepak Kulkarni on Mar 6, 2012 2:09 PM

    Hi
    As you have mentioned that you have maintained the acct assignment grp in the material master after the order was created, it will not appear in the sales order item already created and it will only reflect in new orders and changes to existing orders for that material.
    Proposed solution:
    If it is order related billing that you are doing, then goto VA02 and delete and re-enter the item with same material and qty.
    The account assignment group will appear.
    If the item is delivery related and if the delivery has already been created but PGi not done, then delete the delivery and then delete the item in the sales order and re-enter the item as told above. If PGI also done, then reverse the PGI, delete the delivery and re-enter as suggestd in above scenarios.
    The account assignment group will appear in the billing document document tab in item level.
    Regards
    Madhu

  • An incorrect default value of account assignment group in sales order

    I created a new sales order; however, the default value for account assignment group is not the same value maintained in customer master.
    Any idea how could this happen?

    have you checked user exit MV45AFZZ? Maybe there is a coding inside, changing the default value when creating a new sales order.
    regards
    Ralf

Maybe you are looking for