GL account created in wrong account group

Hello I have a GL account created in wrong account group? Some transactions have been posted to this GL account already. How can I reconcile the transaction if I want to create it in the correct account group?
Best Regards
Prabin

Hello,
Create a new GL account, post your future postings to that.
Make a transfer entry from old GL to new GL.
Block the current GL for future postings.
Regards,
Ravi

Similar Messages

When I open TB, under "Accounts", it only shows the option "Create a new account". Option: "View settings for this account" is NOT shown.

When I open TB, I no longer see any information about the TB account I've used for years. Instead, the main menu shows only "Accounts" -- "Create a new account - Email, Chat, Newsgroups, Feeds". Option: "View settings for this account" is NOT shown.
Also the main menu does NOT show "Email - Read messages, Write a New Message" or "Advanced features", etc..
The actual emails pertaining to the TB account I've used for years are still present under the "Users --> xxxxyyyy --> AppData --> Roaming --> Thunderbird' folder.

http://kb.mozillazine.org/Recovering_a_profile_that_suddenly_disappeared

How do you create separate iCloud accounts

not real computer savy. How do I create different iCloud accounts, so we are not sharing everything?

on iPhone? If you share an iPhone I amafraid you will have to share "everything" unles every time you will be going to settings and reconfigure it.
Otherwise, go to your computer and from different account create an iCloud account.

Unable to Create G/L Account Number in G/L Group

Hi Experts,
We are not able to create G/L Account NO.
While creating Account Number in FS00 TCode,
I have selected one of the created Account group and gave the Account Number which falls under that Account group range. Still i am not able to create the Account Number.
I am getting the following error:
1) No PABCDL statement account type is defined in chart of accounts ABCD
2) You cannot create the Account Number using the range which is specified.
Please let us know
Thanks
Rajanikanth

HI,
Before you start creating your G/L account the minimum configuration required are as given below.
1.Creation of Company code
2.Define Chart of accounts
3.Assign Chart of accounts to company code
4.Define account group
5.Define retained earnings account.
If you will try to carete the G/L account without creating the Retained earnings account the error what you have pointed will appear.
You may please check your configuration and then craete the G/L
If find helpful assign points.
Surendra

Can't create accounts from IDM to AD group

Hi!
When I want to create an account in an AD (dc=rascal,dc=net), I wish create it in "GlobalADM" group.
I have defined the Account Attribute in Resource ( I have used "groups").
So, in the Attibutes section in User Form, it prints "groups" and the rest of AD attributes. In this textbox I write cn=GlobalADM,cn=Users,dc=rascal,dc=net
But it prints the following error:
Unable to set user info: 'SetInfo(): 0X8007200A: , 00000057: LdapErr: DSID-0C090B38, comment: Error in attribute conversion operation, data 0, vece, Attribute or directories services value specified doesn't exist.
In Idm Resource Reference document, I read that "groups" is the correct attribute. In AD I can create accounts manually in this group. And I have tried with other groups with the same error.
can anyone help me?
Thanks!!!

AD and all directories require a distinguished name for a user. Where the user actually lives in the directory. If you are doing this through a custom workflow and form you need to set the dn in the form. If you are using the tabbed user form and admin interface you need to set the identity template.
For the template:
cn=$lastname$\,$firstname$,ou=Domain Users,dc=yourcompany,dc=com Note:This string must match where the users will be created in the tree.
If doing this in a sync process or some type of workflow calling a form set the following:
<Field name ='accounts[AD].dn'>
<Expansion>
<concat>
<s>cn=</s>
<ref>accounts[Lighthouse].lastname</ref> (if doing a sync this would be activeSync.lastname)
<s>,</s>
<ref>accounts[Lighthouse].firstname</ref>
<s>,</s>
<s>,ou=Domain Users,dc=yourcompany,dc=com</s>
</concat>
</Expansion>
</Field>
If you are doing this through custom workflow don't forget to update waveset.resources:
<Field name='waveset.resources'>
<Expansion>
<filterdup>
<append>
<ref>waveset.resources</ref>
<s>AD</s>
</append>
</filterdup>
</Expansion>
</Field>

HT2534 I try to create a new account and tells me that i m too young to create one. I m borned on 1968. What s wrong?

Good morning,
I have bought from the States an ipad 2 and i live in helsinki.
I tried to create a new account in app store and after filling all the necessary details it refuse to me to create an account cause it says i m too young!!
I m born on 1968 , how can it possible?? What s wrong?
Steve

Did you check the format for your input, like yy/mm/dd or yy/dd/mm, mm/dd/yy etc.

Create Customer with Account group ZO05 to BP

Dear RE Experts,
In my project there are three scenarios related to BP and Customer.
1) Create BP with Account Group Zo05 to Customer (Which is Working)
2) Create Customer With Account Group Zo05 to BP
3) Create only Customer (No BP) With Account Group ZO01,ZO02,ZO03,ZO04,ZO06 and ZO07
I want help from Experts how to create last two scenarios in RE? What configuration is need?
What is Tcode to create only customer?????
Thanks in Advance...
Manzoor

Hi,
Goto SPRO\Cross-applications components\master data synchronization\synchronization control
check whether is it activated from cutomer --> BP
And also check the following setting
Goto SPRO\Cross-applications components\master data synchronization\customer&vendor integration\business partiner settings\settings for customer intration\define BP role for direction customer to BP
might be it will give some solution to your 2nd problam and finall fir 3rd issue you can use XD01 to create customer and don't assign these account groups in "Define BP role for direction customer to BP"
Srini

Create G/L Account Centrally cant find "Field Status group"

Dear All,
When i create G/L Account Centrally i can no t find "Field Status group" as the picture showed. Before i do this, i have already defined the field status groupd and assign this to the company code J610. However i can not find "Field Status group" in Tcode FS00.
Please help me on this! Very appreciated!

Hi,
Please check as per steps given below :
1. Go to transaction code OBD4
2. Double Click on Account Group
3. Double Click on Document Entry
Check whether Field status group is Suppress.
Regards,
Tejas

Wrong initial group for Oracle Linux account

Hi,
Before I install the Oracle database 11.2.0.1 in Linux server 2.6.39-400.209.1.el6uek.x86_64, I created the following groups oinstall, dba, oper, and asmadmin.
groupadd oinstall         # required from training
groupadd dba                # required from training
groupadd oper              # and group asmdba, asmoper from training
groupadd asmadmin # optional from training
I made a mistake when I created Oracle user account. I created it with dba as initial group“ useradd -g dba -G oinstall,oper,asmadmin oracle”, instead of “useradd -g oinstall -G dba,oper,asmadmin oracle”
After all I installed Oracle database, now I have concerns and questions. Should I use usermod to update the Oracle user account to oinstall as initial group or just leave it alone?
If I now do “usermod –g oinstall –G dba,oper,asmadmin oracle”, will it break anything, any impact to the database?

You are obviously using Oracle Linux and the Oracle UEK2 kernel. In this case you can save yourself a lot of trouble by simply using:
su - root
yum install oracle-rdbms-server-11gr2-preinstall
The above will fetch and install all software prerequisites, setup the oracle account and groups and configure necessary kernel parameters. Then simply run the Oracle installer.
P.S. The primary group is automatically assigned to files created by the account. To use dba instead of oinstall it is ok as long as you do not need to create any account to install or update the Oracle software without having sysdba access other then the oracle account.

Created a wrong icloud account in my iphone device.i want to delete that icloud in iphone.please help

created a wrong icloud account in my iphone device.i want to delete that icloud in iphone.please help

Welcome to the Apple Community Hany.
Go to settings > iCloud, scroll down and tap delete account. You can then enter the correct one.

I created a wrong icloud account in my iphone device.i want to delete that icloud in iphone.please help

created a wrong icloud account in my iphone device.i want to delete that icloud in iphone.please help

both icloud account are different in laptop and iphone 5 what to do

I am trying to create another email account with talk talk. and I keep getting a failed message saying 'mail could not log into the mail server talk talk. Yet I already have another email account with talk talk. Not sure what I am doing wrong

I am trying to create another email account with Talktalk. I already have one account.
I try to input the new email address and password and get a failed message
'Mail could not lot into the mail server talktalk.net.
I have tried several times and keep getting the same message.
Any ideas

Accessing your emails from any computer connected to the Internet or from a Smart phone should be straightforward.
For help on how to set up your e-mail on some of the most common software applications and devices, see How do I set up my TalkTalk email?
If your software application or device isn't listed, all you need to connect to your TalkTalk e-mail mailbox are the TalkTalk e-mail settings. Make sure you use the right email settings for your specific email address.
TalkTalk email addresses only
Login / Username
[email protected]
[email protected]
Incoming mail server
mail.talktalk.net
mail.talktalk.net
Incoming Port
110
143
Outgoing mail server
smtp.talktalk.net
smtp.talktalk.net
Outgoing Port
587
587
Outgoing SSL
Yes
Yes
Outgoing Authentication
Yes
Yes

Set outgoing account based on address book group

Hello -- I am looking for a way to automatically set the account of new outgoing messages based on the address book group membership of the email recipient. For example, a script or rule that works something like:
If [any recipient] belongs to group [employer1] set message account [employer1];
If [any recipient] belongs to group [employer2] set message account [employer2];
If [any recipient] belongs to group [personal] set message account [personal];
etc.
Paul Berkowitz has written a very clever script to do exactly this for Entourage (see http://scriptbuilders.net/files/otheraccountx2.0.5.html) but I have been unable to locate an equivalent for Mail.app.
I would very much appreciate any suggestions regarding where to find (or how to build) a script, automator workflow, etc. that accomplished this task.
Thank you!
Adam

V.K. wrote:
for some reason it can only script changes to messages that were initiated by apple script. At least that has been my experience. I would be VERY happy to be proved wrong on this.
Thanks for the feedback. Assuming your point above is correct, is it possible to create a script or workflow that initiates a new outgoing email message then changes the account to something other than the default? For example, I might might disable [cmd-n] for new messages, then set up new shortcuts linked to simple scripts so that that [ctrl-cmd-A] would initiate a new message with the account set for Employer Alpha and [ctrl-cmd-b] would initiate a new message with the account set for Employer Beta. An alternative solution might be to write a script to replace the usual [cmd-n] with a simple dialogue box that forces me to make a conscious decision about the From account every time I initiate a new outgoing email message.
My goal here is to prevent a situation in which I forget to manually switch from the default account to the correct account for an outgoing message, thus inadvertently sending email from the wrong address. Either of the solutions I described in the paragraph above would meet my needs... might one or both of these might be possible?
Thank you again for your support,
Adam

Wrong Accounting Entry for Rejection Excise Invoice through J1IS

Dear Experts,
When we are doing Rejection of Excise Invoice through J1IS, a wrong accounting entry is getting generated by system.
Where can I check the settings for Accounting Entry for Rejection Excise Invoice?
Thanks & Regards,
Reshma

Generally Excise Invoice for other invoice posting will be done through J1IV after creating Excise Invoice for other Movements in J1IS.
If Automatic Posting is activated against your excise group then you need not again to post J1IV. It happens along with J1IS.
By the by how you are returning Excisable goods through Return delivery with Original invoice 122 or through Return Purchase order 161 Movement type.
Have you entered Excise Rates BED, ECS and SECS in J1IS?
Elaborate in detail.

Wrong accounting entry for FRB2 (Freight Value)

Dear All,
Wrong accounting entry is happening for Freight value for a standard PO.
Rs. 300 was maintained in PO for this condition type, GR is done for full qty. but Accounting entry is Material cccount Rs. 156.24 to Freight clearing account.
Please help me on this issue
Regards
Prashant Atri

PO was created with 3 line items with each line item having freight condition type FRB2 - Freight value
For first line item it is Rs.200 for 1,008 quantity
For Second line item it is Rs.300 for 7,200 quantity
For Third line item it is Rs.300 for 2,604 quantity
GR was done for 3rd line item for the entire PO quantity 2604, but the frieght value is flowing only Rs. 156.24
1) Material is valuated at Standard Price.
It is Valuated at MAP
2)Condition type- FRB2- Rs 300 is entered at the Header Level and it is marked as a Group condition because of which it got apportioned to all the line items in the Purchase Order.
It is entered line itemwise with Rs.300 to the third particular line item and there is wrong flow of freight value for other line items too in GR.
Is Freight Condition type is a header condition and also check is it a group condition ( in t.code: M/06)
It is a header condition but not group condition and the values for frieght were given line item wise.
Need help to resolve this.
Edited by: prashantatri on Sep 2, 2011 12:14 PM
Edited by: prashantatri on Sep 2, 2011 12:15 PM

GL account created in wrong account group

Similar Messages

Maybe you are looking for