GL account linkage with activity group for AVC- Funds management

Hi,
I have activated (BCS) funds management in my system. My client wants that system will give error message for some expense GL accounts and for other expense GL accounts it will only give information message.
For that i have created new activity group for AVC but i have no idea how we can link GL accounts with activity group for AVC.
Request immediate help.
Thanks in advance.
Manisha

Hi,
The correct way to deal with this is not with activity groups, but with tolerance profiles. Create tolerance profiles with error and warning messages accordingly and then create a tolerance derivation strategy, which on the basis of commitment item, will derive the relevant profile.
Regards,
Eli

Similar Messages

Why am I not receiving e-mails with activation code for e-print ?

why am I not receiving e-mails with activation code for e-print ???? Have requested resends of e-mail several times -- but nothing as yet

Hi yvonnek49,
Welcome to the HP Support forums. I understand that when trying to activate the HP ePrint app that you haven’t received the activation code.
Which email address are you using to activate the app, your personal email or the printer’s ePrint email address? If you have been using the printer’s ePrint email address, please try again with your personal email address. If you have been using your personal email address, please check your junk/spam folders to see if it was redirected there. It can take up to 24 hours to receive the email.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Req:SAP Best practice for the Funds Management

Dear all,
Let me know where I can get the SAP Best practice for the Funds Management . Waiting for your valuable reply.
Regards
Manohar

Hello Manohar,
You can find documentation in links below:
Industry Solution Master Guide - SAP for Public Sector:
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000065911
SAP Best Practices for Public Sector:
http://help.sap.com/ SAP Best Practices -> Industry Packages -> Public
Sector
Online Library for Funds Management:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/c62c6d6d84104ab938a
a7eae51db06/frameset.htm
I hope it helps
Best Regards,
Vanessa Barth.

Account determination with valuation grouping code

We currently have 25 plants (valuation areas) setup using one chart of accounts and a common valuation grouping code for account determination. We now have a need to change one of the plants to use different accounts than the other 24 for the GBB transaction. I can see that transaction OMWD allows me to enter a different valuation group code by plant; so I've entered a different code for the plant we want to change. I then go into OBYC, double-click on GBB and I can see all the accounts set up. From here, if I press the 'rules' button I can see the options to base account determination on. Currently, the 'valuation modification' checkbox is unchecked - I believe this has to be checked in order to use the valuation grouping code.
I'm a little unclear on how to setup the different accounts for the valuation grouping code I've assigned to my one plant. When I checked the 'valuation modification' checkbox and save, I get a message 'the current account determination will be deleted if the rules are changed'. I've done this in a sandbox environment and it certainly does delete all the accounts setup for GBB! But it does then give me the option to enter the valuation grouping code, which is what I need to enter different accounts.
Am I doing this correctly and in the right sequence? Is there a way to save the current values in GBB so they don't go away when I choose 'valuation modification'?

Hi Leslie,
Based on your problem statement, if all the 25 plants are associated to a valuation grouping code, ideally your GBB key should have had the valuation modifier checked in the rules.
If it were not checked, then your current account determination for GBB key will get deleted when you add or delete a rule. Reason being the characteristics for account determination have now changes. Example, if you account determination is based on Valuation class as well, then earlier GBB had Valuation Classs/ Account but with the new rule it will have Valuation Mod./Valuation Class/ Account. SAP can't automatically map your previous account determination to the new account determination.
Best way to move forward is to take a screenshot or save your account determination from Table T030. Make changes to the rule. Then redo the account determination by refrecing the account determination that you saved before.
Regards

Strange account behaviour with active sync

Hi all,
i determined a strange behaviour with Active Sync:
I deleted an Account in IDM but in the active sync log i can always see the account information??
Thnx Michael

Although, now that you are doing this
My workaround is to use an additional offscreen buffered image, do all of my rendering to that, and then at the end copy that image in one go to the drawGraphics from the buffer strategy.you no longer need to use BufferStrategy.Yes, good point. That didn't occur to me.
The way my implementation is I have a pluggable rendering strategy (i.e. the strategy pattern) where I can choose an implementation that will use the frame's bufferStrategy and drawGraphics, or my own BufferedImage back buffer. In light of what you've said I can easily change my implementation to not use the buffer strategy at all and I should save some rendering time.
I've found all sorts of weird behaviour when I use active rendering and have the OpenGL pipeline enabled (I need the pipeline enabled because I want accelerated images), e.g. even setting rendering hints can sometimes cause drawString to not output any text after the first frame.
I was really using BufferStrategy because I wanted to use hardware page flipping and sync my screen updates to the vertical blanking interval which, as it happens, I can't actually get to work - but that's a problem for another day/topic.
Anyway, I appreciate your follow-up, thanks.

ISE: create rules with AD groups for Users and Computers

Hello,
We've just begun to work with ISE.
Is it the good place to post on ISE, or there is a dedicated forum in another place?
We'd like to create some rule depending of Computer member groups AND Users member groups from AD, but we meet some difficulties.
We've created AD groups for Computers and Users depending of their Department:
Users_1
Users_2
Computers_1
Computers_2
When we create some basics rules regarding one group only:
- with a group Computers_x to attribute a specific VLAN to a computer (when no Windows session is opened), it runs correctly.
- with a group Users_x to attribute a specific VLAN to an user (when Windows session is opened), it runs correctly.
But when we create a rule regarding a group from Computers and one from Users, to attribute a specific VLAN to an user on a specific computer, this rule is not applied.
Is it possible to use ISE on this way?
Thanks for help.
Regards,
Chris

Enable EAP Chaining— if you want Cisco ISE to allow authentication of both machine and user in the same EAP-FAST authentication.
http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns742/ns744/docs/howto_80_eapchaining_deployment.pdf

Standard objects for Trade Fund Management

Hi everybody,
Iu2019m working on Trade Fund Management, I need to import CRM data to BW.
Iu2019ve searched on the BI Content for standard TFM Data Sources, DSO and cubes, but I wasnu2019t able to find anything: there's an InfoArea called 0CRM_FM, but itu2019s empty.
In CRM I was able to simulate extraction for BW by using RSA3 transaction (i.e. extractors 0CRM_FM_FND, 0CRM_FM_FND_PLAN, 0CRM_FM_FU, etc).
We have installed Support package 703, level 14: where can I find standard structure for TFM? do they exist?
Thanks in advance,
Francesca

Hey
This is not related to XI.
Please post your question in either CRM or BI forum.
Thanks
Aamir

Problems with Activation Key for Windows 7

Seeing as this has to do with the physical key and not the software for Windows 7 I do not know which board I should post this in.
I have a Toshiba Satellite A665 that came with Windows 7 Home Ed. serial key label on the bottom of the laptop. After 3 years of use I can no longer read some of the letters on the key. I want to wipe my laptop and do a fresh install of W7 since my laptop has been extremely slow and buggy recently. Is there any way to recover my product key?

You don't need a key. When you do a recovery to out-of-box state (the day you first used the computer) using Toshiba Recovery Media, the original Operating System will be reinstalled and automatically activated. Consult your User's Guide "Recovery of Internal Storage Drive" for detailed instructions. Type "User's Guide" in the Start/Search box and then click on User's Guide. If you have occasion to post back here, please include your COMPLETE model info as in my examples below.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Preparing Websites with Active Content for Announced Browser Changes

Does everyone know about this? Is what Macromedia supplied
the best way to fix this issue?
http://www.adobe.com/devnet/activeco...devletter.html
I nearly fell of my chair when I was showing a client some
flash work and each time I rolled over a .swf if would become
selected and not work, I couldnt work out what the heck was going
on, made me look like bit of goose.
Looking for others thoughts ont he subject.

Their solution is OK but not the best. 2 other options I
found that were better were SWF Object (
http://blog.deconcept.com/swfobject/),
this option has a lot of other features you might like as well.
But if you are looking for a very un-intrusive solution then
this link is what you should use. You just add the <script>
tag at the end of your HTML code and it corrects the problem.
Helped me fix over a 100 eLearning course in about an 1 hour
without touching any of the existing Flash code and only adding a
single line to all HTML launching files.
http://www.ediy.co.nz/internet-explorer-flash-applet-activation-fix-xidc19237.html
Also, this "patch" from Microsoft was pushed out back on
April 11, 2006.
Tim

Accounting postings with ledger group - How to remove it?

Hi Guys...
The postings of the transactions TBB4 and TBB1 are recording the ledgers group (BKPF-LDGRP) = "0L" in the accounting postings. The client is requesting that this information is not recorded.
How do I remove it?
Thanks a lot.
Best regards.

Hi Rodrigo,
Please use the IMG path below to create a ledger group that contains just the ledger you want to accounting.
Financial Accounting (new)
Financial Accounting Global Settings
Ledgers
Ledger
Define Ledger Group
You must create and assign accounting principles to the ledger groups you created.
Financial Accounting (new)
Financial Accounting Global Settings
Ledgers
Ledger
Parallel Accounting
After all, you must assign your valuation area to the accounting principle
FSCM
TRM
TM
Accounting
Organization
Assign Accounting Codes and Valuation Area
Regards,
Itajaci Júnior

PROBLEM WITH ACTIVATION KEY FOR CRYSTAL REPORT

I have bought 2 licenses of Crystal Report and one of them does'nt work.
Could you please tell me what i have to do to get a new one ?
Thank's for your help.
Regards
Eric

Have you downloaded & followed the SAP Crystal documentation for 8.8? There are a number of changes in how we need to do things.
Also, optional parameters do not work & neither to default values in parameters. These are still to be fixed

Symbolic account linkage with G/L,, when G/L are made departmentwise,

In the present client G/L are made department wise i.e wages and salary permanufacturing, wages and salary per marketing, how to link them by symbolic account

Hi,
Symbolic accounts are linked to G/L accounts on a 1 to 1 basis or on a 1 to many basis using the feature PPMOD.
Use the t-code OBYG to assign your symbolic accounts to G/L accounts.
Hope this helps,
Reward points if helpful,
Thank You,

Help with Infomaker tool for editing Contract Manager Template

I am new to Primavera Contract Manager (11i) and has been assigned with a task of editing one Submittals template on the system as the person who was handling it left the company.
On doing some research I found out that it is done through the Infomaker tool and I was able to do so the test server.
But on the live server, whenever I try to open the same template using Infomaker, it will ask to select the database, once we select the database which is Oracle 10 G express, it quits even without showing any error message.
I tried creating a new user on Oracle to make sure it is not because of wrong user name and password, but what ever details we give, infomaker just quits when tried to connect to any database.
Can you kindly help me to trace out the issue?

Hi Suhas,
The rule used in workflow template WS50100021 is a standard one. So try to find out that on what basis it is fetching the agents. It could be the case that the logic specified in the rule does not fulfill your requirement.
The other reason could be that you have not specified the task as general. Please check if the agents tab is activated(green) in the task or not. If it is not you need to set the task as general.
SOLUTION : if you want to get the workitem in your own SAP Inbox for testing purpose, you can set the WFINITIATOR as agent instead of that standard rule. This setting will send the workitem in your own SAP Inbox.
Regards,
Guddan

User Exit for the Funds Management Update

Hi Experts ,
My requirment is to make the movement type 261 as stastical . This should be reflected in COO11 T Code, Please suggest me the User Exit Or The BADI.
Thanks in Advance,
Regards,
Manish

Self Solved.

Cisco ACS 4.2 integration with Active Directory

Hello,
I´m new in the administration of ACS, we have recently implemented on server ACS version 4.2
for manager all users authorization for our Network.
We are in one environement which have an Active Directory, group and users.
Now, i´m just able to creat a new user in ACS and work with on the Client SWITCH, what i need to do, is to integrate my ACS 4.2 with Active Directory.
for work with the user and Group that a register in my AD.
Someon can help me please?

You can't actually see the user's membership from ACS. All you can do, create group-mapping under external database >> group mapping section. This would give you an option to map external (AD) group with an Internal group.The group memberrship need to be modified under Active Directory.
Once user is succussfully authenticated and learned as a dynamic user in ACS user setup database, it would be mapped with an ACS internal group based on group mapping we did.
Let me know if you have any doubts.
Regards,
Jatin

GL account linkage with activity group for AVC- Funds management

Similar Messages

Maybe you are looking for