GL Account Number is missing
Hi,
While saving sales order,I am getting problem like GL Account Number is missing,I am creating VA01 by taking Contract number as referance,also I have created new condition type ZF03,by taking ZROO condition type as a referance,once I will going to use ZFO3,I am getting the problem,but not for ZROO,but ZF03 is same as ZROO,why its like this? Pls give me the solution......
Regards,
Raju.Kulkarni
hi syam,
kindly elaborate on your error,
check in condtions tab of the sales order by going to the analysis tab,
the g/l assignment is made in pricing procedure for the condtion type ,
if you have copied the pricing proc also and changed the condition type then this hould not arise and if you have created a new pric proc kindly check, is there any account key(second last column) mentioned inthe relevant pric proc in which that condition type is inserted.
if yes then seein vkoa what g/l account in maintained in front of that account key
test n revert
Mohit Singh
Similar Messages
-
Adding ChecksForPayment gets -5002 ("Account number is missing")
When trying to add a ChecksForPayment object, I am getting a -5002 error with the description "Account number is missing [OCHO.BankNum]". I am setting the cfp.BankCode to the value of the OHEM.bankCode field. Is there something else I am missing?
Thanx,
TimDear Tim,
Dont type the cfp.BankCode value, let it empty, only use the Bank Account Code in the column: CustomerAccountCode ; with that works fine.
Regards,
Daniel. -
How to pay missed payment without knowing account number and SSN
Hello. I recently have problem paying a account that has been cancelled.
I started use verizon wireless from 2009, at that time I was in college and just arrived U.S. so that means I didn't have a ssn at that time.
But verizon wireless still let me have my own account(with my passport!). I terminated the service at Sept. 2011, at that time I was moving from one place to another,so I missed the last payment(about 50 dollors).
I didn't realize it until recent I check my credit score, I was reported by verizon wireless on my credit report...no one even send me a e-mail or try to reach me...
Now my question is: I only remenber my verzion cell phone number and the last 4 digits of my verizon account, can I pay that missed payment?
I called the customer service and they told me I have to know my SSN or Account Number to pay. since the account has been cancelled I could not access my account on verizon wireless web page.
Please help!!!!See here:
http://support.apple.com/kb/HT4874
iTunes Store credit or gift cards cannot be used as a form of payment to upgrade your iCloud storage (payment methods accepted include credit and debit cards). -
Missing master data for Account number Delta
Hi,
I am working on production system,Some records are missing master data(attributes street,city for Account number for starting with Account number 9xxxxxx) for Delta load,Field lenguth is 10.these Missing records are getting loaded with full load or full repair.but I want to load load with regular delta load.Every day I am getting records with other Account number start with 1 to 8.and load is fine. Problem with only Account number 9xxxxxx.
Please help me whats the problem,where can i find related info.how to fix this issue.
Is there any delta setup problem
This generic data source ,pulling from table ADRC .numeric pointer.Hi ,
Please check at source sytem side in RSA3 whether you are able to loacte the data with the mentioned account number............
please post your reply to proceed further
Cheers,
Swapna.G -
RFBILA00 Alternative account number Missing
Dear All,
I assigned operating general ledger accounts to financial statement version, and in GL master data, i have already assigned alternative account number to them. but when i run RFBILA00 report, i turn on "accounts with zero balance" " ALV grid control", in the following result screen, i can get the correct report tree and accounts assignment, but when i show alternative account number field, all of them are blank. what's wrong with it? i would like to see all these alternative account numbers, and i checked some SAP notes, found they can not resolve this problem.
Do you have any suggestions on this issue?
@SAP system information: ECC6.0(SAP_APPL 603+AFS 603)
thanks&
best regards
PeterAnyone can help me?
thank you very much! -
Group account number missing FB03/FB03L
Dear Gurus,
I have a problem with FB03/FB03L. The NewGL is active.
In the both FB03 and FB03L the group account number (BSEG-ALTKT) cannot be displayed in Entry view nor in General ledger view. If I switch the view to a list (Goto -> Display as list) the group account number can be dispayed.
Did somebody solve this issue before me?
Thanks,Thanks a lot Atif,
but with the settings in FB00 I cannot add the Group account number into Entry view nor in General ledger view. Right?
I'm looking for the solution that will add BSEG-ALTKTinto those two view.
Thanks, Filip -
Using delivery type lfart from likp to write out the GL Account Number
Hi Guys,
I am writing a report for the bill of lading. Now I have to take in the GL Account Number from the user at input which can be either say 852342 or 853243 for two types of shipments 1. Plant to customer or 2. Intercompany. Now I have been asked to use LFART (NL - Replenishment Goods) field from LIKP to decide after taking in the user input for the GL Account Number what kind of shipment it is and write the GL account number in the report. Can somebody explain how to do it. I can't make out how one type of delivery can decide which kind of shipment it is based on the GL Account Number entered by the user on a selection screen? Can somebody give me some code or example?
Please help.
Thanks in advance.
AMI think you missed out the statement
MOVE 'X' TO wa_exknx-sakto.
Regards, Vinod -
HELP!!!! I am a graphic designer I LOVE my version of Photoshop elements 5... I am also a Mom of two who depends on my party supply business as my only income currently!!!!
Upon opening to work on a party supply order DUE TODAY for a kid's first birthday I got this ERROR MESSAGE:
"Your adobe photoshop elements user name organization or serial number is missing or invalid. This application cannot continue and must now exit" And then closes.....
I don't know where my disc is to uninstall/reinstall since I got this program Oh say 10 years ago.... WHAT DO I DO!!? I am in complete PANIC mode!
Anyone?! Chat said they couldn't help me it's too old?!?! HELPHello ...Mom,
here you will find (if stored at Adobe) "General infos about your Adobe Account" https://www.adobe.com/account.html. To see what Adobe has saved about your serial number, please have a look there: http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
On the other hand you could use a non Adobe program, like
Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…
If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
Good luck!
Hans-Günter -
ME_PROCESS_REQ_CUST GL Account Number
I am running this BADI in the IF_EX_ME_PROCESS_REQ_CUST~PROCESS_ACCOUNT interface. My code is pasted below. I am able to retrieve our the GL Account Number from the cross-reference table and move it to wa_exkn-sakto. However, SAP issues a message that the GL Account need to be entered, thinking that it is not there. It is on the screen, and also in wa_exkn-sakto when I return to the Req screen after the BADI executes.
I am thinking that since SAP does not regognize it as being populated, or, on the screen, I have to move it somewhere else as well. The commented out code was a test to see if somehow I need to introduce MEACCT1100-SAKTO into my logic.
Thank-You.
METHOD if_ex_me_process_req_cust~process_account.
* D A T A *
DATA: wa_exkn TYPE exkn,
wa_exknx TYPE mepoaccounting_datax,
wa_item TYPE mereq_item,
wa_itemref TYPE REF TO if_purchase_requisition_item,
wa_exkn_hold TYPE exkn,
wa_exknx_hold TYPE mepoaccounting_datax,
wa_item_hold TYPE mereq_item,
wa_itemref_hold TYPE REF TO if_purchase_requisition_item.
* P R O C E S S I N G *
IF im_count = 1.
CLEAR:wa_exkn_hold,
wa_exknx_hold,
wa_item_hold,
wa_itemref.
ENDIF.
CLEAR: wa_exkn,
wa_exknx,
wa_item,
wa_itemref.
* get account classification data *
CALL METHOD im_account->get_exkn
RECEIVING
re_exkn = wa_exkn.
move wa_exkn to wa_exkn_hold.
CALL METHOD im_account->get_exknx
RECEIVING
re_exknx = wa_exknx.
move wa_exknx to wa_exknx_hold.
* get item data *
CALL METHOD im_account_ref->get_item
RECEIVING
re_item = wa_itemref.
move wa_itemref to wa_itemref_hold.
CALL METHOD wa_itemref->get_data
RECEIVING
re_data = wa_item.
move wa_item to wa_item_hold.
MOVE wa_item TO wa_item_hold.
* Get the Gl Account Number if needed *
DATA: ls_z4ppi_glmap TYPE z4ppi_glmap.
IF wa_exkn-sakto IS INITIAL AND
( wa_item-knttp = 'F' OR
wa_item-knttp = 'K' ).
SELECT SINGLE * FROM z4ppi_glmap
INTO ls_z4ppi_glmap
WHERE zzmatkl = wa_item-matkl AND
zzacc_assign = wa_item-knttp.
IF sy-subrc = 0.
MOVE ls_z4ppi_glmap-zzacc_no TO wa_exkn-sakto.
* move ls_z4ppi_glmap-zzacc_no to MEACCT1100-SAKTO.
ENDIF.
ENDIF.
** Cuenta Mayor
*field-symbols <fs_sakto> type meacct1100-sakto.
* Utilizo el truco de asignar el programa de control y el campo al field
*move wa_exkn-sakto to SAPLMEACCTVI-MEACCT1100-SAKTO. "' to <fs_sakto>.
*assign ('(SAPLMEACCTVI)MEACCT1100-SAKTO') to <fs_sakto>.
*if <fs_sakto> ne wa_exkn-sakto.
*endif.
* set the GL Account Number *
CALL METHOD im_account->set_exkn
EXPORTING
im_exkn = wa_exkn.
CALL METHOD im_account->set_exknx
EXPORTING
im_exknx = wa_exknx.
endmethod.I think you missed out the statement
MOVE 'X' TO wa_exknx-sakto.
Regards, Vinod -
F110: same bank account number for different customers
Hi Guru,
when I run F110 for different customers (payment method Ri.Ba.) in the payment proposal I see the same account number for all the payees, in particular the account number of the first customer is duplicate for the second one.
So in table REGUH the fileds ZBNKN and ZBNKL have the same value for all the customer selected in the payment proposal.
Can anyone help me?
Thanks.Hi abaper,
again, corrections 1030848 incorporated in the note [1617466|https://service.sap.com/sap/support/notes/1617466] for the enhancement object BANKEN_AUSWAEHLEN_CUG_IT are missing for the release 605, support pack SAPKH60505.
Mariagrazia what correction instructions you have implemented to correct your problem? It's related to the account number of vendors or customers?
For customer's accounts I've developed a temporary solution related to BANKEN_AUSWAEHLEN_CUG_IT:
Delta001
Context Block
I_REGUP LIKE REGUP .
STATICS:TMP_TPBANK_IT LIKE TPBANK,
Delete Block
LIFNR_TMP TYPE LIFNR,
Insert Block
LIFNR_TMP TYPE LIFNR,
kunnr_tmp TYPE KUNNR. "MITCH 18012012
Delta002
Context Block
REFRESH:TMP_TPBANK_IT.
LIFNR_TMP = I_REGUP-LIFNR.
ENDIF.
Delete Block
IF TMP_TPBANK_IT[] IS INITIAL.
Insert Block
IF kunnr_tmp is initial. "MITCH 18012012
kunnr_tmp = i_regup-kunnr. "MITCH 18012012
endif. "MITCH 18012012
if kunnr_tmp ne i_regup-kunnr. "MITCH 18012012
clear: tmp_tpbank_it. "MITCH 18012012
refresh: tmp_tpbank_it. "MITCH 18012012
kunnr_tmp = i_regup-kunnr. "MITCH 18012012
endif. "MITCH 18012012
IF TMP_TPBANK_IT[] IS INITIAL.
Waiting for corrected instruction note, hope this hint helps..
Regards, Mitch. -
R12 Search on Supplier Bank Account Number
Hi,
We want to search our suppliers on the bank account number, which is stored at site level. But I'm missing
the field Bank account number on the Suppliers Inquiry Page.
Is is possible to add this field to the Suppliers inquiry page?Hi
Please find the attached document for the Bank details which you were Refering for . Also i dnt find any source for atatching the doc , so i will tell the naviagtion
Invoice > Supplier > Inquiry
Here clik you will the supplier page on the left hand side you will find the Bank details . Please give the bank account number and do the necessary transaction .
Please update me once ur question is rectified
Regards,
user12025158
Edited by: user12025158 on Aug 19, 2010 3:49 AM -
Bank account number is not displaying in Payslip.
Hi
Please advice for the below mentioned issue:
Bank account number is not getting displayed in payslip. What i have observed is there are two entries coming in BT one is correct entry of wagetype /559 and another entry generating is of wagetype /470 where bank key is displaying 12345 and no account is coming.
Screenshot attach:
Please advice for the same on priority, what i am missing in config regarding the account number display on payslip.
Regards
AparnaHow did you do the confic in PE51 to capture the bank account number?
T-Code PE51 -> give your form name and then double click on single field , make follwing entries Table = XBT, Table field = BANKN, Identifier = /559 -
I have seen Remit-To bank account column in Invoice header as well as in Scheduled Payments tab in Invoice Screen. May I know the difference?. Some invoices I could see bank info at header and some invoices I could see at scheduled payments? how this is happening? Suppose If payment method is electronic and in case if bank account number is blank at the header then if we generate bank file for payment and send it across to bank, then bank will reject for this invoice right? how do we resolve this?
from where Remit-To bank account number is populating in Scheduled Payments tab in Invoice Screen?
I know Remit-To bank account number is populating at invoice header from supplier/site bank information.but not sure about Scheduled Payments tab in Invoice Screen.
Appreciate if anyone explains
Thanks!!Hi ramesh,
Some of the invoices didn't have bank account number and payment process was processed. We sent payment details to bank. Finally bank rejected this file b'se of missing bank info. So payment process is not validating bank number.
I could see some of the invoices dont have bank number at header level, but has bank number info in scheduled payments bank account number. Any idea how this happened/ how to recreate?
Thanks!! -
I placed an order today over the telephone for BT infinity, and engineer appt booked etc...
But one thing I am missing is my BT account number, I need this so I can set up the BT ID. I tried ringing up but no help from India or wherever. Is it possible for a moderator to help me out on this, I have not yet received a confirmation email but have received a BT Sport confirmation email which I set up with advisor on telephone.
Help would be very appreciated,
ModernFamilyFanHi ModernFamilyfan,
Thanks for your post and welcome to the forum, you will need to wait until the order for your service completes before registering for your BT ID by which time you should have received a letter confirming your account info.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Error 'Specify account number' while posting a parked document through FBV0
Hi,
I am getting an error 'Specify account number' while posting a parked document through transaction FBV0.
I am not able to figure it out as to what account number it is referring to. Since the document is parked I assume the GL account used has no problem. Please help.Hi,
Try to change the Account number and then save or post the data. I think Once We Parking the Document it wont allow to post the data without changing.
Try same scenario in the development its be useful
Regards,
Maybe you are looking for
-
Can I use an Ipod bought in USA in Germany, with Itunes.de?
-
FRM-41213 : Error raised by a form when launching report on the same server
Hello ! I get this error FRM-41213 when launching a report via rp2rro.rp2rro_run_product. I don't want to set the report server in a var or property into a library or a form cause my app is to be sent to customers who will not have the sources files.
-
Ipod cannot be recognize by itunes
When i updated my ipod touch 4th gen to ios5 my ipod cannot be recognize by itunes and my computer recognize the ipod as camera.i have already tried searching on youtube about it but it wont work..anyone can help me...thx..
-
Replicating a bex report in webi
Hi I am trying to replicate a bex report in WEBI.In the bex report based on a variable value i show either planned values or actual values for amount field, both of which are coming from 2 different cubes.How do i achieve the same functionality in a
-
Hi, Our PI Production Java Stack is getting down very often. We need to restart every time. Yesterday we have found some set of Errors in Transaction SMICM Trace File. SET1: [Thr 3599] *** ERROR => IctCmWrite: write(99) failed. errno=28 [ictxxcache_