GL account wise With Holding Tax

Dear All,
We would like to know, is there any table where we will able to get the data for gl code wise document numbers along with with holding tax code.
Regards
Anilkumar

Hi
I have gone through "BSEG" and "With_Item". I am not able to find the with holding tax data in "Bseg", where as in "with_item", there is no information for GL account
Is there any other table ?
Regards
Anilkumar

Similar Messages

OBWW - Define Accounts for With Holding Tax to be paid over

Hi All
I am unable to activate Rules and assign accounts in TCode OBWW (Define accounts for with holding tax to be paid over) as the screen is greyed out.
Please guide me
Rgds
KIM Khan

Hi
You may in the same screen in another window.
Regards
Murad

With Holding Tax provided in IDOC FIDCC2 is not getting updated in Acc Doc

Hi All,
I am Posting a Accounting document in R/3 though Idoc FIDCCP02.
This idoc has With holding Tax info segment as E1FIXWT. i gave all the info in this segment, like Tax code, Tax type , Withholding tax base amount (local currency) , Withholding tax base amount in document currency, Withholding tax amount (in local currencyand Withholding tax amount in document currency
However, when the Idoc gets posted,and the accounting document gets generated the With holding tab does not get populated in SAP.
Please let me know your inputs, that why the woth holding tab is not getting populated with the relevant info from Idoc.
Thanks in advance

Hi,
I have the same issue. But as the idoc is generated in a SAP system of the same release I would have expected that the withholding tax data is already complete. Also are no withholding tax info populated in IT_ACCTX. There only VAT is visible. I suppose IT_ACCWT was meant.
Anyone any idea?
Regards
Stefanie

Re: With holding tax is not picking up while excution of RERAPP

Dear team,
While executing the RERAPP.With holding tax is not picked.We are working on 4.7 version.We had suggested a badi to pull the with holding tax field.Still system is not showing any caluculation.Plz advice us if any one of you did the immplimenttation in 4.7 and how you resolved this problem .So that it would be help ful for us too.Please do the need ful.
Regards,
Suma.

Dear Sir,
What we did is all the with holding tax data include the basic amount calculations manually in excel there after given the input to the system through accounting interface. You can try with your abaper. Plz make sure that GL code length and currency .This has been done through so much work around. Technical person will guide you .If you still facing the problem where exactly your facing then i can help you out.Please be more clear what you did till now then only i can explain you with clarity.
Regards,
Suma.

With holding tax

Hi,
If i select With holding tab when entering Down payment request,Down payment and invoice for vendor, i am getting error message as Withholding Tax information missing from line item
Could you advise me where i made wrong cogfiguration for with holding tax.
Your immediate response will be highly appreciated.
With regards,
V.K

Hi
Check Feild status group of G067 in OB14 and make sure that these are optional and also the Feild status group of WHT GL accounts you have assigned.
There is always a possibility that these are in suppressed state.
Award points if useful.
sarma

WITH HOLDING TAX ON DOWN PAYMENT

HI
I am using TCode F-47 for down payment request to be paid to vendor. In Vendor Master Record with holding tax information is activated. But at the time of processing payment against down payment request using TCode F-58 With holding tax not deducted and full down payment requested amount getting debited to vendor.
Pl suggest me
Message was edited by:
Chandrakant.K Acharya

Hi Chandrakanth
u check once WHT settings at WHT type for Payment posting.here you remove inherit base option. for Cess claculating on TDS.
you check once define WHT codes for cess. here you calculate for 1% cess 0.022 % on TDS base amount or invoice amount. ex: inv: 100 , TDS 2.2 %. Cess 1% on 2.2% means 0.0220. like that you calculate.
Then you update cess tax codes in FK02,here u select liability option.
Then you can use f-47. here system showing popup with Base amount,TDS & cess codes.then you save it.
now you check with f-58. other wise you want temporly solution. go to FB02 change doc. there you can modify WHT amounts then save it.
ok all the best
Raj

With Holding tax On Down Payment not picking

Dear All,
I have configured with holding tax on Payment posting, assigned to vendor,company code it is working fine for invoice positng and vendor payment.
When I am trying to post down payment f-48 the with holding tax codes selection screen is not pop-up or it calculates with holding tax.
Why the with holding tax selection tax is not displaying.
B.S.Rao

Hi,
1. Please check withholding tax type is assigned to the company code, IMG: Withholding tax>Extended withholding Tax>Company Code>Assigned Withholding Tax Types to Company Code.
Note: also check the here the proper dates u201Cw/tax obligated frmu201D and u201COblig.to w/tax untilu201D e.g. 01.01.1900 and 31.12.9999.
2. Go to OBWW also check the GL is assigned or not.
3. Also check the field status of recon. account & alternative recon account assigned for special GL for down payment, fields e.g withholding tax code and withholding tax amounts etc. should not be suppressed.
Thanks
Javed

With holding tax Returns

Dear Sapgurus,
we are using 2 different with holding tax type one is at the time of inv posting and 2nd is payment posting which is earlier, we had created tax types and tax codes we assigned in vendor master assgined to company code and automatic posting also, finally if any vendor pay advance then we calculate tds it will post to tds g/l account, after that in sap any option how to file the tds returns.
Regards
Veeru

Dear,
Once you have posted TDS then usually at the month end you will run below transaction to complete the process..
1. Use transcation J1INCHLN (this will club all TDS posted per section and paid)
2. Use transaction J1INBANK (when you make TDS payment in Bank then bank will give you challan number which you have to update in the system)
3. Use transaction J1INCERT (this will print the vendor certificate (this is usually an year end practice)
4. Use transaction J1INMIS (this will provide consolidated report for TDS)
Regards,
Chintan Joshi

With holding tax base amount for 1099 vendors with discounted payment term

Hi Friends,
We have a below situation for 1099 vendors,
Some of the 1099 vendors are set-up in the system with payment term with discounts i.e. 2% if paid within 10 days
As per config, system posts with holding tax base amount at the time of posting payment.
With holding tax rate is 0%,
Based on modified net amount calculation
and
Cash discount calculation before w/tax calculation
When we have vendor with input tax, system excludes tax amount at the time of payment but for the with holding tax base calculation amount system does not exclude input tax type.
Which causes difference in 1099 misc vendors
Below is the example of how system calculates the amount.
Invoice $ 1000, payment term 2% if paid within 10 days. Input tax 7.25%
Payment going out=
$1000- $ 72.5(tax 7.25%) = $ 927.5 18.55 [2% discount] = $ 908.95 (payment amount)
With holding base calculation =
$ 1000 100 (2% discount) = $ 900
Difference between payment going out and with holding tax base = 908.98 900 = 8.98
Can some one please tell me how to get rid off this difference?
Moreover, please tell me if its normal to have 1099 vendors with discounted payment term.
Any thoughts on above situation will be helpful
Edited by: Shefford William on Jan 28, 2008 11:36 PM

Dear All
i am also having the same problem. The example is
Net invoice Value   = $ 100,000
Input Tax @ 15%   = $ 15,000
Total Invoice Value = $ 115,000
Cash Discount = 20% with in 20 days
On payment the system behavior should be
Debit Vendor invoice Value   = $ 115,000
Debit Cash Discount @ 20%    = $   20,000   ( 20% of the Net Invoice Value that is 20% of $ 100,000)
Credit W/H Tax deduction @ 3.5% = $ 3,325 ( 3.5% of 95,000 the Inv Value - Cash Discount that is $ 115,000 - $20,000)
Credit Bank Account = $ 91,675 ( Inv value - Cash Dic - W/H tax that is $ 115,000 - 20,000 - 3325 = 91,675)
However at the time of payment system is calculating tax as follows
Debit Vendor invoice Value   = $ 115,000
Debit Cash Discount @ 20%    = $   20,000   ( 20% of the Net Invoice Value that is 20% of $ 100,000)
Credit W/H Tax deduction @ 3.5% = $ 3,220 ( 3.5% of 92,000 the Inv Value - Cash Discount that is $ 115,000 - $23,000. This $ 23,000 is only calculated for W/H tax calculation that is 20% of $ 115,000 )
Credit Bank Account = $ 91,780 ( Inv value - Cash Dis - W/H tax that is $ 115,000 - 20,000 - 3220 = 91,780)
this is not the common practice when using the net base value in the system.
Can any one help me in this regard. I really have been stucked in this problem for many days
Regards
Bilal Athar

With holding tax tab not showing up in MIRO

Hi,
Im trying to do a MIRO for a vendor which requires with holding tax. The setting in done in the vendor master.However while doing MIRO, the with holding tax tab does not show up.
Does anyone know why with holding tax tab is not showing up in MIRO and what needs to be done.
PS: It is set up correctly in the vendor master and it works and shows up while doing FI transactions.
Thanks

Hello Shruti,
Kindly check if on the vendor master, on withholding tax tab, checkbox "liable" has been ticked.
Also kindly check the reconciliation account defined in the vendor master and compared in GL master record, FS00, should have a field status group of G067- Reconciliation Accounts or its equivalent in case you don't use standard SAP field status grouping.
And also check on the MRIO screen, have you checked "calculate tax" under general tab.
Hope it will help you
Thanks
Para

Re: With Holding tax

Hi all,
I have an issue relating to with holding tax. wtax code is not picking the percentage ammount while doing the transaction.Please provide the solution.
Regards,
Suma.

What r u doing Invoicing or Advance payment. Pls chk in Config whether u have maintained percentage for that particular Tax code
SPRO
Financial Accounting --> Financial Accounting Global Settings -->
Withholding Tax --> Extended Withholding Tax --> Calculation --> Withholding Tax Code --> Define Withholding Tax Codes
And chk in Vendor Master also whether they have maintained any Exemption code or percentage.
If this information is useful. Pls assign Points

T code fbl3n , adding output field is with hold tax code.

hai experts ,
tcode is fbl3n.
adding new field is with hold tax code in output fields..
inpu field is gl account number and company code and psting date.
but in report bsis table data is come, but this not properly assiging to output display structure.
but i find out some badis like   1. FI_ITEMS_MENUE01
                                               2. FI_ITEMS_MENUE02
                                                3. FI_ITEMS_CH_DATA
                                               4. BADI_LAYER
but these badis not working properly.
but i   develop some implimentation enhancement frame work , but inthis point , cursor will comes to enhancement block but not move step by step code..
please solve.
thanks in advance.

Hi,
To add new fields in the out put for the transaction FBL3N Use BTE.
Read the documentation first..
Go to Tcode FIBF =>Environment=>Info system(P/S)=>F8=>Select the event 00001650=>Click on documentation
1. Extend the structure RFPOSX and RFPOS with a new append structure.
2. Run the RFPOSXEXTEND report.
3. Create BTE 1650 (Business Transaction Event). For this purpose, copy the sample function module SAMPLE_INTERFACE_00001650 into the customer namespace.
4. Activate the module in transaction FIBF. Go to 'Settings -> Products -> ... of a customer' and create a product. You can choose the name of the product and the description. Set the 'Active' indicator and save.
5. Go to 'Settings -> P/S Modules -> ... of a customer' and include an entry for event 00001650 with your new product and function module. Save the entry.
Regards
DKS

With holding Tax Remitence challan - CIN Version

Hai!
this is regarding the creation of remittance challan for with holding tax. some documents are not being picked in the challan remittance( j1inchln). Cheeked with the table with_item for those documents it is clear that no challan has been generated.
When checked with the bsik table the document does not contains any value.
Section code is updated in the doucments. Vendor Masters are also ok regarding the with holding tax.
Can you please tell me the possible ways to solve this.
Thanks!
Rajesh

Hi!
Thanks! Mr.LaxmiNarayana, I checked up with the FSG of Tax accounts and document contains section codes.
Can you please tell what is Bsik Table is for?
thanks
Rajesh

With-holding tax not updates

Hi,
While doing MIRO the with-holding tax tab is not getting updated. but when I view the accounting document the TDS is getting posted to the correct G/L and the amount is correct. I have maintained in Vendor master the with-holding tax.
Please suggest where to configure this.
Regrds,
Raziq

Dear MAURIZIO BIANCOTTI,
What you meant to say is while doing MIRO, in with-holding tax tab both with-hold type and code will be updated other fields will not be updated.
for Example...
1. If invoice amount is 10000 and if I want to tax for only 5000 then i can manually enter the base amount in the field and the system will calculate the percentage from the based amount only is it.
2. if the invoice amount is 10000 and if i want to tax for the whole amount then the system will only enter the with-hold type and code, the base amount will not be take by the system but when posting the document the system calculates based on the invoice.
i am right or wrong.. please reply
regards,
Raziq.

Upgrade Issue: With-holding TAX Conversion From Classic to Extended.

Dear Friends,
I am working for an Upgrade Project. (From 4.5 to ECC 6.0)
Please help me with steps for convesion of With-holding tax from Classic to Extended.
Your help will be appriciated and Rewarded.
Thank you,
DARSHAN PATEL

Hi,
Converting from classic to Extended withholding tax is possible but be sure once do.
Spro-Sap reference img-Financial accounting-withholding tax-withholding tax change over- MAP TAX CODES AND HEALTH CHECK AND MIGRATION PROGRAMS.
YOU HAVE TO UPDATE YOUR TAX CODES LIKE CENTRAL INVOICE PROPORTIONATELY...
IF IT HELPFUL ASSIGN POINTS, ANY PROBLEM REVERT BACK ME.
REGARDS,
SANKAR

GL account wise With Holding Tax

Similar Messages

Maybe you are looking for