GL AND AR datasource and data targets - question for BI 7.0

Folks,
It has been sometime I did GL, AP and wanted to know if this still holds good
GL Balance : Extract via 0FI_GL_6 and load it to 0FIGL_C01 with or whihout an ODS OFIGL_O06.
GL Line itms: Extract via 0FI_GL_4 and load to ODS 0FIGL_O02.
Similiarly use AP_6 and AP_4 Data sources for Accounts Payable. I am assuming GL and AP Data sources are coupled.
Now has anything changed in BI 7.0 or because of ECC5 or ECC6.
For All the above I did not see any transformation BI Content I only still see 3.x flow.
whats up with 0FIGL_C10 and 0FI_GL_10 ?.
At the end of the day I only need GL balance and their line items. So what should I use ?.
thanks
Gman

Hi GMAN,
1) GL and AP datasources extract from 2 different sets of OLTP tables. They are NOT coupled
    from BW extraction pointof view....But In R3...when a financial posting is made to a GL
    account....a related posting made into AP tables......
2) In GL or AP functionality nothing has changed due to: BI 7.0 or because of ECC5 or ECC6.
3) In the new Business Content Release...."SAP NW 7.0 BI Content Add-on 3 SP06"....
    SAP gave new cubes, ODS etc....
New Business Content link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Good luck, BB

Similar Messages

Getting error while mapping fields btween DS and Data target IO

Hi,
I am getting error message "Rule(target field:0DEL_GR_WT): No source units assigned" while activating transfer rules btween Data source and Data target.
Infoobject has got mapped with source field BRGEW.
Even in the data source the field units are GEWEI
In BI the units are 0unit_of_wt.
Every thing seems to be fine,but while mapping fiellds in the transfermation i am getting above error

Hi,
I think u have to assign source unit in transformation .
double click on that particular filed and it will take you to other screen and there you have choose that field and have to assign,
if am wrong please ignore it.
Thanks,
Jack

Link Between PSA and Data Targets

Hi Experts,
Could you please help me is there any table which will have PSA & data target (Cube or ODS) details.
I know the table which will have data target manage screen details and other table wil give the details like data loaded into till PSA.
But i want to know any SAP table will have link between PSA & data target.
I want to know if the request is loaded till PSA or it is loaded into data target.
Any table will give details like PSA request no, if target is there then some kind of flag like....
Please let me know if any one know the table which will have PSA as well as Data target details.
Thaks in Advance
Shaik

Hi,
I clearly mentioned im aware of Manage screen details table, i want link between PSA and Data target table which will return if requst loaded till PSA or PSA & target.
Im using BI 7.0 .
Regards
Shaik

InfoPack processing (PSA and data targets in parallel) data and lock issues

Good morning,
We are on BW 3.5 and contemplating changing our InfoPackages from option 1 (PSA then data targets) to option 2 (PSA and data targets in parallel) for performance reasons (test have shown a gain of 50% in load time compared to using option 1).
Issues have been raised that using option 2 may lead to data consistency and lock issues especially for SD infosources where we are dealing with multiple daily status changes for same document that need to be read in a specific order.
From what I have read, such issues were possible in BW 2.x e.g. OSS Note 384023 and 364577. However, I am under the impression that the issues may have been resolved in BW 3.x and that it is "safe" to use option 2 (PSA and data targets in parallel).
Would really appreciate if you could please share your experience when using processing option 2 (PSA // DT) especially in a BW 3.xx system.
Thank you in advance,
Catherine

Hi Amit,
The help text (vers. 3.5) for this method of loading says simply -
"A process is started to write the data from this data packet into the PSA for each data package. If the data is successfully updated in the PSA, a second parallel process is started. In this process, the transfer rules are used for the package data records, data is adopted by the communication structure, and it is finally written to the data targets. Posting of the data occurs in parallel by packet.
This method is used to update data into the PSA and the data targets with a high level of performance. The BW system receives the data from the source system, writes it to the PSA, and starts the update immediately and in parallel into the corresponding data target"
Not sure where you got your description from, but is not explained well and confusing.
Regards,
Ken

To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

Thanks for the reply.
But this library doesn't contain any sample .cfg and .dat files which can be read and understood. Can you please provide the same?

APD and Data Target in CRM

Hi,
I have created ADS in CRM through EEWB with BI info objects.
Now I want to load this ADS table through APD from BI to CRM.
for that I am creating APD in BI with category as general.
I have selected data target as CRM
In that I am giving the appropriate logical system .
In the second dropdown which is for Data Targets : Here I am not getting ADS ( Analytica Data Source ) as my Data Target.
In CRM table BWTARGETS it is there with all attributes.
Also in CRM SPRO the data Target is Available with name as CACHE.
Path in SPRO : SPRO -> Integration with other mysap components -> Data Transfer from SAP Business Information Warehouse -> Define ID for data target adapters.
Let me know what I am missing in above process to get data target ADS in APD design ?

Hi
Just create a Process Chain to execute this APD method, if the process Chain is already available, then just insert this Process in to the process Chain and execute the Process Chain by normal process, by hoe we do in general.
Hope it solves...

Data source and data target for p.o condition records

Hi All,
can any one help me what is the data source for p.o and shedule line condition records and their data target
Thanks
sivakumar R

hi sri,
to pick up the condition records from the table table konv with respect to the p.o no and also schedule line with condition values from table A016 any data souce and any data target are available in standard.
pl help on this
Thanks
sivakumar R
Edited by: Siva Kumar on Feb 19, 2010 10:22 AM

Delta and Full Load question for cube and ODS

Hi all,
I need to push full load from Delta ODS.
I have process chain.... in which the steps are like below,
1. R/3 extractor for ODS1 (delta)
2. ODS1 to ODS2 (delta)
3. ODS2 to Cube ---> needs to be full load
Now when i run process chain by further processing automatically ODS2 does init/delta for Cube.
How can i make it possible for full load ??
can any one guide anything in this ?
Thanks,
KS

Hi,
1. R/3 extractor for ODS1 (delta) : This is OK, normally you can put the Delta InfoPack in Process Chian
2. ODS1 to ODS2 (delta): It automatically flow from ODS1 to ODS2 (you need to select Update Data automaticall in the Targets at the time of ODS creation)
3. ODS2 to Cube ---> needs to be full load :
This you create a Update rules from ODS1 to Cube then Create InfoPackage in between ODS2 and Cube then do full loads. You can delete the data in the CUbe before the load ann dthen do Full load to Cube.
Note: In ODS2 don't select Upadate Data autmaticlly to Data Targets
Thanks
Reddy
Edited by: Surendra Reddy on Nov 21, 2008 1:57 PM

Reconciliation and data verification approaches for data in sap r/3 and bw

Hi
Cam anybody suggest what are the different reconciliation and data verification approaches to assure that BW and R/3 source data are in sync.
Thanks in advance.
Regards,
Nisha.

Hi
What you can do is, go to R/3 transaction RSA3 and run the extractor, it gives you the number of records extracted and then go to BW Monitor to check the number of records in the PSA.
if it's the same, there you go.
there is an HOW-TO Document on service market place "Reconcile Data Between SAP Source Systems and SAP BW".
Check this document as well which is very helpful.
There is another HOW-TO document "Validate infocube data by comparing it with PSA Data". this is also a good document.
Hope it helps.
Hari Immadi
http://immadi.com
SEM BW Analyst

Facts and Figures - A Question for the Forum Mods

A bit of a daft question for which I am sure the Forum Mods can provide an answer.
How many folks were registered on the old forum and how many on the new one?
I just want to put something BT Chairman Sir Michael Rake wrote to BT shareholders this month into context.
"To forbid us anything is to make us have a mind for it."
-- Michel de Montaigne, Essays, 1559

Naughty naughty General - they dont do "daft" on this forum, you should know that.
"You may well think that, I'm afraid I could'nt possibly comment"
Francis Urqhuart, who was never known by his initials to his friends.
AQ.
"Welcome to Royston Vasey - You'll never leave."

Comman to take user level backup(tables and data in table for a particular)

Hi ,
I need to create a sql script to take user level back up i.e i need to take back up ,(export the tables and data in those tables in particular user) to my pc..
i am able to do the same from unix command ,but not able to do the samq in sql script
Please advice.

Hi ,
I need to create a sql script to take user level back up i.e i need to export the tables and data in those tables in particular user to my pc..
i am able to do the same from unix command ,but not able to do the samq in sql script
Please advice

Changing Original System and Transport Target System for Objects

Hi Gurus,
I need to do mass transport of all the Infoobjects to newly defined system. Since these objects have different Original system. Its giving me error. Again, for other objects, Transport Target system is QAS, But we want to change it to NBW (A new system to which we want to send transport) . I am able to change package of Infoobjects. Is there mechanism to change Original System and Transport Target for System? Please let me know ASAP.
Regards,
Harpal
Message was edited by:
Harpalsinh Gohil

If you simply edit your original post, it will go to the top of the list. There's no need to post duplicates.
Subjects with a subject of "Urgent" will be filtered out by a lot of responders.
Why not close this thread and bump the other one?
Rob

How do I make the time and date stamp correct for my documents, songs in itunes, etc.

No matter when I add a song or save a document it says it was added/saved on 1/5/2011. It would be great if somehow I could get back the dates and times that things were added, but I know that may be impossible. I just want a way to have the correct time and date stamp from now on. Finally it wasn't always like this, when I first got the computer everything was correct, I just started noticing it. Additionally my clock is correct, so I don't understand why things aren't saved according to the clock. Thanks in advance

Resetting your Mac's PRAM and NVRAM

Information on Datasources and Data Targets in R/3

Hello friends,
I've been informed that there are several Open Extraction Requests in the R/3 System, due to which the transport of a Dictionary object had not been possible.
Could some one assist me in getting the solutions for the below questions?
1. How do I see the open Extraction requests in R3 system?
2. Is there a table in R3 which lets me know, to which systems data is being loaded? ( for example BW1/ BW2/BW3)
3. How do I know, which Target systems are being loaded?, their technical names, which data sources are being loaded? status?
Kindly assist, as it is a matter of urgency
Full points...

Hi,
Delete the content of setup table (lbwg).Try to delete your deltas in R3 side, transaction lbwq. It should work, tell me if doesn´t.
Check:sap note 328181.
Basic Thing: Clear the entries in LBWQ,RSA7 and SM13 and delete setup tables.
Hope This Helps,
Regards,
Amit Kr.

JFileChooser and date format questions

I have a JFileChooser that currently works - I set the default directory and allow the user to select a file or enter a file name.
I have been asked to modify this to prepopulate the file name field on the JFileChooser.
How do I do that? It is not obvious which method to call to set the filename field.
Also, the file name needs to be a timestamp "*yyyyMMddHHmmss*.dat"
I tried creating the timestamp part with the following code, but it does not format as expected.
        String s = "";
        SimpleDateFormat dateFormat = new SimpleDateFormat("yyyyMMddddHHmmss");
        try
            java.util.Date now = new java.util.Date();
            java.util.Date dat = dateFormat.parse( now.toString() );
            s = dat.toString();
        }What is wrong with this?
Thanks.

I don't do Swing and this is also not the subforum for Swing questions. It has its own subforum.

GL AND AR datasource and data targets - question for BI 7.0

Similar Messages

Maybe you are looking for