GL Balance display  using S_ALR_87012277

Hi All,
   When we execute the report S_ALR_87012277 we get output in normal report format. If we want to export this report to excel file, the data in file is not formated correctly and it's time consuming to format that. Just like FBL3N do this report have ALV display in higher versions (ours is 4.6C) or is there any other way...
thnx
Sravanthi

Hi,
From ECC 5.0 onwards, there is an option to modify the layout as per user requirements for this report so as to display the value of G/L account and balances in the same line, which will transfer data to excel easily.
Ramanand Bhatt

Similar Messages

  • Similar report for Account Balance display which could be scheduled in the background

    Hi SAP gurus,
    As we know to display GL Account Balance Display we have std report "FAGL_ACCOUNT_BALANCE" But we can not run this in background as it is ALV report.
    So I would like to know a similar report which could be scheduled in the background.
    Thanks in advance
    Regards,
    -Chetan

    Hi,
    As division is not header field of invoice it is not available in accounting document header as well. Thus it will not be available in any standard reports showning items per account. I'm affraid you need to develop your own report or try to extend existing using user-/customer-exits.
    You can find more information in OSS note 13131.
    Regards,
    Marcin

  • Customer balance display

    i need report for customer balances by depending on the doucmen type. in fbl5n customer balance display customer account number + document type level in standard their is no option. is it possible

    Hi
    In the output you can use sub total or filter option against document type column
    Also in the input screen, in 'Dynamic selections' option (after execute button) you can select the respective document types
    Thank You,

  • Balance Display are different for the same GL account in FS10N & FAGLB03

    Hi,
    It was noted that the GL account Balance Display are different for the same GL account in FS10N & FAGLB03.
    Please advice what would have cause the matter.
    Thank you,
    Regards,

    Hi Vani,
    Think you are using version 6.0.
    I had observed that TCode FAGLB03, displayes balances for particular Ledger (0L) leading by default.
    While in FS10N there is no option for selecting ledger.
    Try FAGLB03 with all ledgers one by one.
    Add the total and then try to matc wiht FS10N.
    Assign points of Good.
    thanks

  • Balance Display not updating

    Can anyone tell me why the balance display on my phone is not updating anymore?  I have a Samsung Gusto that I bought on 1/5.  It updated the first few times I used it and then it just quit.  I can still get the balance online, but it would be nice to have it there on my phone.  I bought my husband the exact same phone on the same day, and his did the same thing.  I've looked all through the manual and this website and can't find anything.
    Thanks in advance,
    Celeste

  • Balance display issue

    I cannot locate the Balance Display option using the directions Menu -> Settings & Tools -> Display Settings -> Balance Display.
    My Display Settings menu does not include a Balance Display option.
    I asked customer service about this and they had nothing useful to offer. Their suggestion was that I go to a Verizon store and have someone help me find it! lol
    I have a basic Verizon Samsung Gusto flip phone, if that matters....
    Any advice? Thanks....

    cjshahmeran wrote:
    I cannot locate the Balance Display option using the directions Menu -> Settings & Tools -> Display Settings -> Balance Display.
    My Display Settings menu does not include a Balance Display option.
    I asked customer service about this and they had nothing useful to offer. Their suggestion was that I go to a Verizon store and have someone help me find it! lol
    I have a basic Verizon Samsung Gusto flip phone, if that matters....
    Any advice? Thanks....
    I just looked through the Samsung Gusto manual, and there is no mention of a "Balance Display" option. Why do you think it should be there?

  • FS10 (GL Account Balance Display) and FS10N(GL Account Balance Display)

    Hi All,
    when we are using FS10 and we are using layout u2018/VELASCOu2019, then in assignment field we get Customer Number.
    But
    when we are using FS10N and we are using layout u2018/VELASCOu2019, then in assignment field we get NOT GETTING Customer Number, but reference number or document number.
    please can suggest why it is working differently.
    Thanks and Regards
    Reena

    Hi,
    I see that you are using FS10 and FS10N which is for GL account balance display and you are mentioning about Customer Number not being populated in this. I assume you are referring to the drill down line item report since account balance output has not option for changing layout.
    In general coming to the GL line item report and customer number, this field is displayed in the report if the table BSEG is filled for this field. So summarizing, if there is no entry in table BSEG for this Line item there cannot be entry in FBL3N. What you are referring to would be a 'offsetting account' logic. Please check the note 112312 about the 'offsetting account' logic.
    But in your case I see that you are referring to Customer Number being displayed in assignment field, so I guess you are using sort key in master data to fill Customer number.The sort key in the master data of the G/L account fills field BSEG-HZUON.
    Refer note 334466 and 676338 for good info about how zuonr is filled and Please refer to the notes 215798,  984305. They will describe you how to put a special field into the line item display.
    Hope this helps.
    Kind Regards
    Soumya

  • Can I connect multiple displays using a mac mini

    Can I connect 2 displays using the mac mini? If so, are there any accessories that I need? Are there certain monitors or connections that I should use?

    Hello,
    Assuming this is a 2012 Mini...
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html
    If you need more...
    http://eshop.macsales.com/item/NewerTech/VIDU3HDMIDV/
    http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/

  • The display used to flicker, now it's completely white! PLease HELP!

    So, my display used to flicker with horizontal lines all over it, and slightly adjusting the angle of opening would fix this, but about a week ago it lightened a few times, then got stuck being really light with the desktop being barely visible, though better from way down angle (if you open it all the way out) and looking like a negative from the way up angle. I restarted it, and the problem persisted. I shut it down for a day, and, upon startup, the screen is now completely white with nothing visible on it. I had connected the PB to my tv using the s-video out jack on the back and I can see the desktop clearly on it, but it's extremely difficult to read any text, largely due to my tv being big and not hi-def. So far I had tried fixing or diagnosing it by switching resolutions and calibration in the "display" area of System prefs and also in universal access "seeing" tab, I've reset the PMU and still nothing. Here's what's going on: if I start visualizer on the iTunes, both the TV and the stock display flicker to black, then the TV does the visualizer thingy and the display goes back to white. The apple logo backlight is on no problem at all times as well. The laptop was never dropped, handled roughly or subjected to extreme temps. The flickering problem had first appeared when I had relized that I only had about a minute for the battery to go completely empty (my 'puter is almost 3 years old). The recall for the displays covers laptops manufactured about 2 months after mine, otherwise all the symtoms listed in the recall match. Does anyone know what I should do next? I had read about getting a new LCD inverter, but at the same time I am now unemployed and really have no dough.... I'm a sound engineer, and I need my PB to be mobile. The only thing that had happened recently is that I installed the newer version of Pro Tools on my machine, LE 6.9. Please HELP!
    PB G4 Ti   Mac OS X (10.3.9)  

    You might have to restore the pictures from your ""backup" you have on iCloud. But, then again, that would put your iPhone back to the last state it was in when doing that backup. But at least you would have all your pictures back.
    iin any case, I wouldn't do any further backups or any changes to your iCloud account, until you've got your pictures back again. Proceed cautiously and carefully at this point, until you get an answer that will safely restore the pictures.

  • How to restrict number of rows display using ig:gridView

    Hi
    All
    How to restrict number of rows display using <ig:gridView datasource="{mybean.mylist}">
    i am getting 10 rows using data_row . i wanna show only first 5 rows .
    pageSize ="5" will be ok . but it displays remaining rows in next page. but i want to display only first 5 rows . is there any attribute to restrict number of rows.
    thanks
    rambhapuri

    I have no idea which component you're talking about. If want to discuss here about a non-Sun JSF component, then please mention about the name, version and build in detail. You can also consider posting this question at the website/forum/mailinglist of the component manfacturer rather than here. At least I can tell you that the Sun JSF h:dataTable has the 'rows' attribute for that. I can also suggest you to just take a look in the TLD documentation of the component in question. There should be all possible attributes listed with a detailed explanation about the behaviour.

  • 0 down vote favorite share [fb] share [tw]        How to hide cut/copy/paste/Replace- menu on the UIWebView when it is being displayed over the keyboard.  Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text b

    How to hide cut/copy/paste/Replace… menu on the UIWebView when it is being displayed over the keyboard.
    Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text box it shows the keyboard. Now If user tap and hold on text box it shows a popup menu. Now while keyboard and pop up are being displayed user scrolls the view. At this time it shows pop up over the keyboard which I need to hide.
    I tried setMenuVisible of UIMenuController when popup rect and keyboard rect intersects each other on viewDidScroll but it didn't help me.
    Any clues will help a lot.
    Thanks.

    You are more likely to get an answer if you post programming problems to the Developer forum. This forum is intended for normal user level problems.

  • End of page in ALV display using OOPS

    Hi all,
       How can i display end of page or footer in ALV display using OOPS concept.
    Thanks,
    vinit

    Hi ,
    Try using this code.
    First add a handler method in your handler class definition as:
    e.g. METHOD handle__end_of_page
    FOR EVENT print_end_of_page OF cl_gui_alv_grid .
    Then implement the method in the implementation part of your local class.
    e.g. METHOD handle_print_end_of_page .
    WRITE:/ 'Flights Made on ', sy-datum .
    ENDMETHOD .
    And register this method as the handler.
    SET HANDLER gr_event_handler->handle_print_end_of_page FOR gr_alvgrid .
    Hope this helps.
    Regards,
    Janaki.

  • Select a range of rows to be displayed using ROWNUM

    I am trying to select a range of records to be displayed using Rownum
    It works using MINUS
    SQL> select rownum,department_id,department_name from departments where rownum <= 20
    minus
    select rownum,department_id,department_name from departments where rownum < 11;
    but does not work if a range is specified
    select rownum,department_id,department_name from departments where rownum >= 11 and rownum <= 20;
    What has gone wrong?
    Details of what I have tried are as follows:
    Connect to the sample schema HR
    SQL> connect hr/hr
    SQL> desc departments
    Name Null? Type
    DEPARTMENT_ID NOT NULL NUMBER(4)
    DEPARTMENT_NAME NOT NULL VARCHAR2(30)
    MANAGER_ID NUMBER(6)
    LOCATION_ID NUMBER(4)
    List all records in Departments
    SQL> select rownum,department_id,department_name from departments;
    ROWNUM DEPARTMENT_ID DEPARTMENT_NAME
    1 10 Administration
    2 20 Marketing
    3 30 Purchasing
    4 40 Human Resources
    etc......
    26 260 Recruiting
    27 270 Payroll
    27 rows selected.
    List the first 10 records in DEPARTMENTS
    SQL> select rownum,department_id,department_name from departments where rownum <= 10;
    ROWNUM DEPARTMENT_ID DEPARTMENT_NAME
    1 10 Administration
    2 20 Marketing
    etc.....
    10 100 Finance
    List row number from 11 to 20, but cannot no rows selected. Why?
    SQL> select rownum,department_id,department_name from departments where rownum >= 11 and rownum <= 20;
    no rows selected
    Use of MINUS can retrieve row number from 11 to 20
    SQL> select rownum,department_id,department_name from departments where rownum <= 20
    minus
    select rownum,department_id,department_name from departments where rownum < 11;
    ROWNUM DEPARTMENT_ID DEPARTMENT_NAME
    11 110 Accounting
    12 120 Treasury
    13 130 Corporate Tax
    14 140 Control And Credit
    15 150 Shareholder Services
    16 160 Benefits
    17 170 Manufacturing
    18 180 Construction
    19 190 Contracting
    20 200 Operations
    10 rows selected.

    For each row returned by a query, the ROWNUM pseudocolumn returns a number indicating the order in which Oracle selects the row from a table or set of joined rows. The first row selected has a ROWNUM of 1, the second has 2, and so on.
    Conditions testing for ROWNUM values greater than a positive integer are always false. For example, this query returns no rows:
    SELECT * FROM employees
    WHERE ROWNUM > 1;
    You can get the selected records based on the rownum using the inline query....
    SQL> select rownum, empno from emp;
    ROWNUM EMPNO
    1 7369
    2 7499
    3 7521
    4 7566
    5 7654
    6 7698
    7 7782
    8 7788
    9 7839
    10 7844
    11 7876
    ROWNUM EMPNO
    12 7900
    13 7902
    14 7934
    14 rows selected.
    SQL> select * from (select rownum rn, empno from emp) where rn > 2 and rn < 5;
    RN EMPNO
    3 7521
    4 7566

  • I recently connected my new MBA to an ACER display using the appropriate Apple hardware to connect to a VGA port. The quality of the ACER display is poor- the image is not clear. How do I achieve the same clarity of picture as my MBA screen?

    I recently connected my new MBA to an ACER display using the appropriate Apple hardware to connect to a VGA port. The quality of the ACER display is poor- the image is not clear. How do I achieve the same clarity of picture as my MBA screen?

    Welcome to the Apple Community.
    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
    On the basis of the specifications you have given for your set up, mirroring should work.

  • MacBook suddenly won't detect my display, Using Mini Display Port to VGA?

    MacBook suddenly won't detect my display, Using Mini Display Port to VGA?

    dohdoh1985, I have the exact same problem also! I recently bought a 42" RCA LCD TV. I connected my MacBook Pro to my TV using a Dynex Mini DisplayPort to HDMI adapter that I got from BestBuy. It worked great until I upgraded to Mac OS 10.6.4 and then it suddenly stopped working. Same TV, same settings, same cables, same adapter. Nothing changed since the last time it worked except that my OS was upgraded to 10.6.4, so i am assuming that is the culprit. The symptoms are EXACTLY the same as what dohdoh1985 described; when I plug in the TV, the laptop display flashes (3 times) as though it is detecting an external display and the picture on the TV briefly goes from blue to black for about 1 second then back to blue. The TV does not appear in the display menu / control panel and there is no sign that the MacBook detected it. I went through the usual troubleshooting steps (reset PRAM, checked connections, tv settings, etc) but nothing worked. Other HDMI sources (i.e. Blu-ray player) work fine on the TV using the same HDMI cable on the same port so there is nothing wrong with the cable, the TV or the TV's input settings.
    Meanwhile, I can still connect my MacBook to my external ViewSonic monitor at work without any problems. It's just the TV that's not working.
    I cancelled my cable subscription a while ago since I only watch shows online nowadays and this was my only way of watching TV shows, so I'm quite upset.
    Apple, please help!

Maybe you are looking for